Package: xserver-xorg-video-intel Version: 2:2.8.0-2 Severity: important
(Previously posted to #406457.) When GDM pops up after bootup, the keyboard stops responding as soon as I type anything. I'm able to do Ctrl+Alt+Fn and work normally on the console *before* I input anything into GDM, however after the input Ctrl+Alt+Fn no longer works, nor does SysReq. The same kind of lockup happens when I pop up the Actions menu using the mouse. In both cases, the mouse can be moved, but clicks are ignored. A hard reset is then required (I couldn't chek logging in by SSH, but the poweroff button is also ignored, however I can play music). This also happens when using XDM, but the server hangs right away without needing to press any key. Running the X session with startx gives no problems. However, when suspending to RAM, waking the computer up results in the same lockup. Reverting xserver-xorg-video-intel from 2.8.0 to 2.7.1 fixes the problem, as indicated in http://bgoglin.livejournal.com/17951.html Thanks! -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 8 jun 23:39 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1867584 1 ago 09:45 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 777 24 mai 01:13 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg ## <XNX by="ivan" date="2009-05-24"> Section "Screen" Identifier "Default Screen" SubSection "Display" Modes "1280x1024" EndSubSection EndSection ## </XNX> Xorg X server log files on system: -rw-r--r-- 1 root root 33154 24 mai 01:08 /var/log/Xorg.1.log -rw-r--r-- 1 root root 32765 24 jul 21:38 /var/log/Xorg.20.log -rw------- 1 root root 50097 3 ago 21:07 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.6.3 Release Date: 2009-7-31 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30.2-dsa-amd64 x86_64 Debian Current Operating System: Linux edgar 2.6.30-1-amd64 #1 SMP Mon Aug 3 12:28:22 UTC 2009 x86_64 Build Date: 01 August 2009 07:44:36AM xorg-server 2:1.6.3-1 (buildd@) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 3 21:03:04 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x3740 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x50380000/524288, 0x40000000/268435456, 0x50400000/262144, I/O @ 0x000020f0/8 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 2.8.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D, IGDNG_M (II) Primary Device is: PCI 0...@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM (--) intel(0): Chipset: "945GM" (--) intel(0): Linear framebuffer at 0x40000000 (--) intel(0): IO registers at addr 0x50380000 size 524288 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): Suspected Mac Mini, ignoring the LVDS (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" removed. (II) intel(0): I2C bus "LVDSDDC_C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output TV has no monitor section (II) intel(0): Current clock rate multiplier: 8 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: ACR Model: 19 Serial#: 2188410634 (II) intel(0): Year: 2008 Week: 27 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617 (II) intel(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 720x...@70hz (II) intel(0): 640x...@60hz (II) intel(0): 640x...@67hz (II) intel(0): 640x...@72hz (II) intel(0): 640x...@75hz (II) intel(0): 800x...@56hz (II) intel(0): 800x...@60hz (II) intel(0): 800x...@72hz (II) intel(0): 800x...@75hz (II) intel(0): 832x...@75hz (II) intel(0): 1024x...@60hz (II) intel(0): 1024x...@70hz (II) intel(0): 1024x...@75hz (II) intel(0): 1280x1...@75hz (II) intel(0): 1152x...@75hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz (II) intel(0): Serial No: LBN0C0144001 (II) intel(0): Monitor name: V173 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff00047219000a7f7082 (II) intel(0): 1b12010308221b78eadc55a359489e24 (II) intel(0): 115054bfef80714f0101010101010101 (II) intel(0): 010101010101302a009851002a403070 (II) intel(0): 1300520e1100001e000000fd00384b1e (II) intel(0): 530e000a202020202020000000ff004c (II) intel(0): 424e3043303134343030310a000000fc (II) intel(0): 00563137330a202020202020202000db (II) intel(0): EDID vendor "ACR", prod id 25 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "ACR", prod id 25 (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0. (II) intel(0): EDID for output TMDS-1 (II) intel(0): Not using default mode "640x350" (vrefresh out of range) (II) intel(0): Not using default mode "640x400" (vrefresh out of range) (II) intel(0): Not using default mode "720x400" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "1280x960" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (hsync out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (hsync out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1792x1344" (hsync out of range) (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range) (II) intel(0): Not using default mode "1856x1392" (hsync out of range) (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1440" (hsync out of range) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "832x624" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "1400x1050" (hsync out of range) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1440x900" (hsync out of range) (II) intel(0): Not using default mode "1600x1024" (hsync out of range) (II) intel(0): Not using default mode "1680x1050" (hsync out of range) (II) intel(0): Not using default mode "1680x1050" (hsync out of range) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1080" (hsync out of range) (II) intel(0): Not using default mode "1920x1200" (hsync out of range) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (hsync out of range) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Printing probed modes for output TMDS-1 (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID for output TV (II) intel(0): Output VGA connected (II) intel(0): Output TMDS-1 connected (II) intel(0): Output TV disconnected (II) intel(0): Using user preference for initial modes (II) intel(0): Output VGA using initial mode 1280x1024 (II) intel(0): Output TMDS-1 using initial mode 1152x864 (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 16124 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (340, 270) mm (**) intel(0): DPI set to (95, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000 (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104 (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200 (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200 (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1 (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359 (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022 (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344 (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415 (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607 (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001 (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087 (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140 (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024 (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198 (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283 (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141 (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060 (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 232960 total, 1 used (II) intel(0): I830CheckAvailableMemory: 931836 kB available (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): Current clock rate multiplier: 8 (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f000000 physical ) (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003f600000 physical ) (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003f601000 physical ) (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003f60b000 physical ) (II) intel(0): 0x00fbf000: end of stolen memory (II) intel(0): 0x00fbf000-0x0f9f3fff: DRI memory manager (239828 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x00fbf000: start of memory manager (II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled (II) intel(0): 0x0f9f4000: end of memory manager (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output TMDS-1 is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 270 (II) config/hal: Adding input device Macintosh mouse button emulation (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 2.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) config/hal: Adding input device HID 05ac:1000 (**) HID 05ac:1000: always reports core events (**) HID 05ac:1000: Device: "/dev/input/event5" (II) HID 05ac:1000: Found keys (II) HID 05ac:1000: Configuring as keyboard (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/hal: Adding input device HID 05ac:1000 (**) HID 05ac:1000: always reports core events (**) HID 05ac:1000: Device: "/dev/input/event6" (II) HID 05ac:1000: Found 9 mouse buttons (II) HID 05ac:1000: Found x and y relative axes (II) HID 05ac:1000: Configuring as mouse (**) HID 05ac:1000: YAxisMapping: buttons 4 and 5 (**) HID 05ac:1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE) (**) HID 05ac:1000: (accel) keeping acceleration scheme 1 (**) HID 05ac:1000: (accel) filter chain progression: 2.00 (**) HID 05ac:1000: (accel) filter stage 0: 20.00 ms (**) HID 05ac:1000: (accel) set acceleration profile 0 (II) config/hal: Adding input device NOVATEK USB Keyboard (**) NOVATEK USB Keyboard: always reports core events (**) NOVATEK USB Keyboard: Device: "/dev/input/event4" (II) NOVATEK USB Keyboard: Found 14 mouse buttons (II) NOVATEK USB Keyboard: Found keys (II) NOVATEK USB Keyboard: Configuring as keyboard (**) NOVATEK USB Keyboard: YAxisMapping: buttons 4 and 5 (**) NOVATEK USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/hal: Adding input device NOVATEK USB Keyboard (**) NOVATEK USB Keyboard: always reports core events (**) NOVATEK USB Keyboard: Device: "/dev/input/event3" (II) NOVATEK USB Keyboard: Found keys (II) NOVATEK USB Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2" (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0 (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event1" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "es" (**) Option "xkb_options" "lv3:ralt_switch" HAL Information (lshal): udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event1' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'es' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' access_control.file = '/dev/input/event0' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0_logicaldev_input' access_control.file = '/dev/input/event2' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0' (string) info.product = 'Logitech USB-PS/2 Optical Mouse' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event2' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial_if0' (string) input.product = 'Logitech USB-PS/2 Optical Mouse' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if0_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if0' (string) info.product = 'HID 05ac:1000' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if0' (string) input.product = 'HID 05ac:1000' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'es' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if1_logicaldev_input' access_control.file = '/dev/input/event6' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if1' (string) info.product = 'HID 05ac:1000' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_5ac_1000_noserial_if1' (string) input.product = 'HID 05ac:1000' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if0_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if0' (string) info.product = 'NOVATEK USB Keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if0' (string) input.product = 'NOVATEK USB Keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'es' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if1_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if1' (string) info.product = 'NOVATEK USB Keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event4' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_603_f2_noserial_if1' (string) input.product = 'NOVATEK USB Keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'es' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input4/event4' (string) DRM Information from dmesg: [ 0.004000] No AGP bridge found [ 0.598121] Linux agpgart interface v0.103 [ 0.744177] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 0.745492] agpgart-intel 0000:00:00.0: detected 16124K stolen memory [ 0.748894] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 121.820545] [drm] Initialized drm 1.1.0 20060810 [ 121.876584] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores) Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.9-13 GNU C Library: Shared libraries ii libdrm-intel1 2.4.12-1 Userspace interface to intel-speci ii libdrm2 2.4.12-1 Userspace interface to kernel DRM ii libpciaccess0 0.10.6-1 Generic PCI access library for X ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxv1 2:1.0.4-1 X11 Video extension library ii libxvmc1 1:1.0.4-2 X11 Video extension library ii xserver-xorg-core 2:1.6.3-1 Xorg X server - core server xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
