Package: xserver-xorg-video-glint
Version: 1:1.2.2-2
Since upgrading to the latest unstable version of X, the X server crashes upon
start, giving a "fatal sever error" and an incomprehensible-to-me backtrace.
The only thing I can garner from the error message is that something happened
in the glint module. The problem does not seem to occur if I start the X
server in a way that is presumably independent of the graphics drivers (eg. by
running a VNC session).
The problem began after I upgraded from the previous unstable version of X to
the current unstable version. I haven't tried downgrading to see if it fixes
the problem because the magnitude of the dependency issues I would have to
unravel is pretty intimidating, but a reinstall of the xserver-xorg-video-glint
package did not change anything.
I have attached a copy of my xorg.conf and a crash log to this email; hopefully
that will also have the proper hardware information. But just to be complete,
the graphics card identifies itself like this in lspci:
00:0f.0 VGA compatible controller: 3DLabs GLINT R3 (rev 01)
and the monitor is an SGI flat panel plugged in via a DVI connector.
- Anne C. Hanna
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "ServerLayout"
Identifier "Default Layout"
# Screen "LCD" LeftOf "CRT"
Screen "LCD"
# Screen "CRT"
InputDevice "Generic Keyboard"
# InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
# Option "Xinerama"
EndSection
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
# Load "freetype"
Load "glx"
Load "int10"
Load "record"
# Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# older standard
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/misc/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
Option "Buttons" "6"
EndSection
#Section "Device"
# Identifier "ATI Rage Fury"
# Driver "ati"
#EndSection
#Section "Monitor"
#Identifier "Panasonic P17"
#HorizSync 30-75
#VertRefresh 50-85
#Option "DPMS"
#EndSection
Section "Device"
### Available Driver options are:-
#Option "UseGamma"
#Option "SWcursor"
#Option "HWcursor"
#Option "PciRetry"
#Option "RGBbits"
#Option "NoAccel"
#Option "BlockWrite"
#Option "FireGL3000"
#Option "SetMClk"
#Option "Overlay"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "PM3NoImageWrite"
#Option "PM3NoDirectFifoWrite"
#Option "DigitalScreen" "yes"
Option "UseFlatPanel"
Identifier "Card0"
Driver "glint"
VendorName "3Dlabs"
BoardName "GLINT Permedia 3"
VideoRAM 32768
# BusID "PCI:4:15:0"
BusID "PCI:0:15:0"
EndSection
Section "Monitor"
Identifier "SGI Monitor"
VendorName "SGI"
ModelName "Unknown"
# HorizSync 50-80
# VertRefresh 60
HorizSync 31.5-120
VertRefresh 50-120
Option "DPMS"
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync
+VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync
-VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync
+vsync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync
-VSync
#my new modeline
Modeline "1600x1024" 103.12 1600 1604 1660 1984 1024 1025 1029 1034
+hsync +vsync
Modeline "1600x1024d32" 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 7
+Hsync +Vsync
Modeline "1600x1024d24" 103.125 1600 1600 1656 1664 1024 1025 1029 1054 HSkew 7
+Hsync +Vsync
Modeline "1600x1024d16" 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 5
+Hsync +Vsync
Modeline "1600x1024d08" 103.125 1600 1600 1656 1664 1024 1025 1029 1030 HSkew 1
+Hsync +Vsync
EndSection
Section "Screen"
Identifier "LCD"
Device "Card0"
Monitor "SGI Monitor"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1600x1024"
EndSubSection
Subsection "Display"
Depth 8
Modes "1600x1024"
EndSubSection
Subsection "Display"
Depth 16
#Modes "1024x768" "800x600" "640x480"
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "Screen"
# Identifier "CRT"
# Device "ATI Rage Fury"
# Monitor "Panasonic P17"
# DefaultDepth 24
# SubSection "Display"
# Depth 1
# Modes "1600x1200" "1280x1024" "1152x864" "1024x768"
"800x600" "640x480"
# EndSubSection
# SubSection "Display"
# Depth 4
# Modes "1600x1200" "1280x1024" "1152x864" "1024x768"
"800x600" "640x480"
# EndSubSection
# SubSection "Display"
# Depth 8
# Modes "1600x1200" "1280x1024" "1152x864" "1024x768"
"800x600" "640x480"
# EndSubSection
# SubSection "Display"
# Depth 15
# Modes "1600x1200" "1280x1024" "1152x864" "1024x768"
"800x600" "640x480"
# EndSubSection
# SubSection "Display"
# Depth 16
# Modes "1600x1200" "1280x1024" "1152x864" "1024x768"
"800x600" "640x480"
# EndSubSection
# SubSection "Display"
# Depth 24
# Modes "1600x1200" "1280x1024" "1152x864" "1024x768"
"800x600" "640x480"
# EndSubSection
#EndSection
Section "DRI"
Mode 0666
EndSection
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/imac:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-686 i686 Debian
Current Operating System: Linux imac 2.6.26.2 #2 Mon Jan 19 08:44:51 CST 2009
i686
Build Date: 14 May 2009 05:49:41PM
xorg-server 2:1.6.1.901-2 (jcris...@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 4 15:59:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "LCD" (0)
(**) | |-->Monitor "SGI Monitor"
(**) | |-->Device "Card0"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Generic Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
unix/:7100,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Generic Mouse
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0...@0:15:0) 3DLabs GLINT R3 rev 1, Mem @ 0xcf800000/131072,
0xd8000000/67108864, 0xd4000000/67108864, BIOS @ 0x????????/65536
(--) PCI: (0...@1:0:0) ATI Technologies Inc RV280 [Radeon 9200 SE] rev 1, Mem @
0xe0000000/268435456, 0xd3000000/65536, I/O @ 0x0000d800/256, BIOS @
0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in
the config file.
(II) "record" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glint"
(II) Loading /usr/lib/xorg/modules/drivers//glint_drv.so
(II) Module glint: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) Primary Device is: PCI 0...@00:0f:0
(WW) Falling back to old probe method for glint
(--) Chipset pm3 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(**) GLINT(0): Option "UseFlatPanel"
(==) GLINT(0): Using HW cursor
(**) GLINT(0): Using Flat Panel Interface
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm3"
(--) GLINT(0): Linear framebuffer at 0xD4000000
(--) GLINT(0): MMIO registers at 0xCF800000
(II) GLINT(0): Using SGRAM memory
(**) GLINT(0): VideoRAM: 32768 kByte
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) GLINT(0): FIFO Size is 120 DWORDS
(==) GLINT(0): Min pixel clock is 16 MHz
(**) GLINT(0): Max pixel clock is 300 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) GLINT(0): I2C bus "DDC" initialized.
(II) GLINT(0): I2C bus "Video" initialized.
(II) GLINT(0): I2C device "DDC:E-EDID segment register" registered at address
0x60.
(II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0.
Backtrace:
0: X(xorg_backtrace+0x3b) [0x813265b]
1: X(xf86SigHandler+0x51) [0x80c5c71]
2: [0xb806c400]
3: X [0x80fe972]
4: X [0x80fe9f9]
5: X [0x80fedf5]
6: X [0x80fef2c]
7: X [0x80fb716]
8: X(xf86DoEEDID+0x11b) [0x80fb88b]
9: X(xf86DoEDID_DDC2+0x20) [0x80fb930]
10: /usr/lib/xorg/modules/drivers//glint_drv.so [0xb7a1be37]
11: X(InitOutput+0xe13) [0x80aecd3]
12: X(main+0x1e1) [0x8071881]
13: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7d2a775]
14: X [0x8070f11]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
