Hi,
now with 2.6.3 in unstable this is a real pain.
With XAA the xserver crashes and without it starts but hangs completly.
I tried it now with an empty xorg.conf and it hangs aswell.
Hardware is:
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics
Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company D530 sff(dc578av)
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at fc400000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 14e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Attached Xorg.0.log is from a start with an empty xorg.conf.
Are you aware of any workarounds? Currently X is unusable here and that's
a bit unfortunate ...
Sven
--
If God passed a mic to me to speak
I'd say stay in bed, world
Sleep in peace
[The Cardigans - 03:45: No sleep]
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 i686 Debian
Current Operating System: Linux marvin 2.6.29-1-686 #1 SMP Sat Apr 4 17:36:29
UTC 2009 i686
Build Date: 09 April 2009 01:23:13PM
xorg-server 2:1.6.0-1 (bui...@puccini.debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 11 10:59:19 2009
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0...@0:2:0) Intel Corporation 82865G Integrated Graphics Controller
rev 2, Mem @ 0xf0000000/134217728, 0xfc400000/524288, I/O @ 0x000014e0/8
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's
supported by the drivers
(II) Matched intel from file name intel.ids
(==) Using default built-in configuration (48 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default i810 Device 0"
Driver "i810"
EndSection
Section "Screen"
Identifier "Builtin Default i810 Screen 0"
Device "Builtin Default i810 Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default i810 Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default intel Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (3)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (4)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) UnloadModule: "i810"
(II) Unloading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Failed to load module "i810" (already loaded, 157793136)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 0...@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
(--) intel(0): Chipset: "865G"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFC400000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at
address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: BNQ Model: 76bd Serial#: 1075
(II) intel(0): Year: 2006 Week: 42
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate Composite
(II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.634 redY: 0.354 greenX: 0.300 greenY: 0.614
(II) intel(0): blueX: 0.138 blueY: 0.076 whiteX: 0.310 whiteY: 0.330
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x...@70hz
(II) intel(0): 640x...@60hz
(II) intel(0): 640x...@67hz
(II) intel(0): 640x...@72hz
(II) intel(0): 640x...@75hz
(II) intel(0): 800x...@60hz
(II) intel(0): 800x...@72hz
(II) intel(0): 800x...@75hz
(II) intel(0): 832x...@75hz
(II) intel(0): 1024x...@60hz
(II) intel(0): 1024x...@70hz
(II) intel(0): 1024x...@75hz
(II) intel(0): 1280x1...@75hz
(II) intel(0): 1152x...@75hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
(II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 25.2 MHz Image Size: 376 x 301 mm
(II) intel(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border: 0
(II) intel(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449
v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz,
PixClock max 140 MHz
(II) intel(0): Monitor name: BenQ FP91GX
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0009d1bd7633040000
(II) intel(0): 2a1001036c261e78ea6d66a25a4c9d23
(II) intel(0): 134f54bdef80714f81908180818c0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300782d1100001ed50980a0205e6310
(II) intel(0): 10605208782d1100001a000000fd0038
(II) intel(0): 4c1f530e000a202020202020000000fc
(II) intel(0): 0042656e51204650393147580a2000fb
(II) intel(0): EDID vendor "BNQ", prod id 30397
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800 350 387 389 449
+hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525
-hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 1512 1744 1024
1025 1028 1070 -hsync +vsync (81.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024
1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) intel(0): EDID vendor "BNQ", prod id 30397
(II) intel(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024
1025 1028 1067 -hsync +vsync (76.8 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492
520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486
525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389
449 +hsync -vsync (31.5 kHz)
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (380, 300) mm
(**) intel(0): DPI set to (85, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 489216 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1956860 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfc400000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x041ff000 (pgoffset 16895)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x04200000 (pgoffset 16896)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x041fefff: DRI memory manager (59520 kB)
(II) intel(0): 0x041ff000-0x041fffff: overlay registers (4 kB,
0x000000002cd0a000 physical
)
(II) intel(0): 0x04200000-0x05ffffff: exa offscreen (30720 kB)
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007df000: start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: depth buffer (16384 kB) X tiled
(II) intel(0): 0x02000000-0x02ffffff: back buffer (16384 kB) X tiled
(II) intel(0): 0x03000000-0x03ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x00800000-0x00804fff: HW cursors (20 kB)
(II) intel(0): 0x041ff000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): [drm] mapped front buffer at 0xf3000000, handle = 0xf3000000
(II) intel(0): [drm] mapped back buffer at 0xf2000000, handle = 0xf2000000
(II) intel(0): [drm] mapped depth buffer at 0xf1000000, handle = 0xf1000000
(II) intel(0): [drm] mapped classic textures at 0xf6000000, handle = 0xf6000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 376 x 301
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia:
10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type:
MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
