debian/changelog | 47 +
debian/control | 2
src/Makefile.am | 2
src/drmmode_display.c | 13
src/nouveau_bios.h | 4
src/nouveau_calc.c | 614 ++++++++++++++++++++++++
src/nouveau_hw.c | 971 +++++++++++++++++++++++++++++++++++++++
src/nouveau_hw.h | 335 +++++++++++++
src/nouveau_local.h | 12
src/nouveau_xv.c | 9
src/nv50_connector.c | 12
src/nv50_crtc.c | 2
src/nv50_randr.c | 4
src/nv50reg.h | 4
src/nv_bios.c | 1239 +++++++++++++++++---------------------------------
src/nv_crtc.c | 546 ++--------------------
src/nv_cursor.c | 4
src/nv_driver.c | 7
src/nv_hw.c | 927 -------------------------------------
src/nv_include.h | 1
src/nv_output.c | 216 +++++---
src/nv_proto.h | 56 --
src/nv_setup.c | 31 -
src/nv_type.h | 26 -
src/nvreg.h | 7
25 files changed, 2671 insertions(+), 2420 deletions(-)
New commits:
commit d748435ea4ea77b9e86e671041fc1da981249fa5
Author: Christopher James Halse Rogers <ch...@cowboylaputopu.(none)>
Date: Sat Apr 4 14:40:00 2009 +1100
New upstream snapshot.
Rebuild against fixed libdrm-dev to pick up libdrm-nouveau1 dependency
diff --git a/debian/changelog b/debian/changelog
index 202147f..759a079 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,50 @@
+xserver-xorg-video-nouveau (1:0.0.10~git+20090404+11be9a9-0ubuntu1) jaunty;
urgency=low
+
+ * New upstream snapshot. Standing FFe is (LP: #346621).
+ - 11be9a9... nv50: fix i2c port addresses
+ - e2aa037... randr12: fall back to standard timings when finding
+ native mode (rh#492819)
+ - 6965663... randr12: fix hw cursor for fully transparent pixels
+ - d12f70c... randr12: pre-nv17 digital fixes
+ - ea567db... randr12: fix restore for cards where CR21 is not left
+ unlocked at POST
+ - bd263d8... randr12: make nv11 dvi work for both crtcs
+ - 52c287d... Every card since nv5 can do panels
+ - 3d371a7... randr12: enable tmds reg access on pre-nv17
+ - 1bb85c8... randr12: reorder ramdac reg access
+ - 4465fdd... randr12: remove nv30 special case
+ - 72eced5... randr12: fix/improve a load of version/feature tests
+ - 37c6916... bios: fix chips with pll limits table version 0
+ - 76c5a05... bios: xf86DrvMsg->NV_ERROR
+ - b1b9bcb... bios: support for pll limits table v3.0
+ - 8c85b4b... kms: CONNECTORn -> CONNECTOR-n
+ - 4e1c323... Restore call to NVDRIGetVersion, to ensure the dri
+ module is loaded
+ - c973f75... Abstract logging in nv_bios.c
+ - b17bebd... nForce DIMM check is now in DRM
+ - 9c991d3... randr12: FP_TG_CONTROL 2: dpms improvements
+ - 5fb2888... randr12: FP_TG_CONTROL 1: turn off digital path when
+ using VGA encoder
+ - 8023dc3... Split DCB 1.5 parsing from 2.0+, get closer to 80 cols
+ - ea027b3... The dcb prior to v1.5 is pretty hopeless, just add a crt.
+ - 921fbcc... randr12: avoid nv11 chip lockup when saving palette regs
+ - 9d46930... xv: oops
+ - 9213c39... xv: post damage after we draw (rh#492239)
+ - d68a052... kms: small cleanup
+ - c9cb6a6... rh#492511 has a CRTC_OWNER of 0x7 for some reason
+ - 95bff61... randr12: fix LVDS legitimately disconnected case
+ - f86e395... randr12: permit vga outputs to be force enabled in xorg.conf
+ - 8427b39... randr12: move a load of hw mode programming into nouveau_hw.c
+ - 163bdce... Turn the smaller mmio wrappers into static inline
+ - 21ee927... Put arbitration and mnp calcs in separate file
+ - 83dc890... nv50: use E-EDID when available + apply edid quirks
+ * debian/control:
+ - Bump dependency on libdrm-dev to ensure rebuild with fixed
+ libdrm-nouveau1.symbols file. Fixes missing Depends: on
+ libdrm-nouveau1
+
+ -- Christopher James Halse Rogers <r...@ubuntu.com> Sat, 04 Apr 2009
14:35:12 +1100
+
xserver-xorg-video-nouveau (1:0.0.10~git+20090327+f1907dc-0ubuntu1) jaunty;
urgency=low
* New upstream snapshot. Standing FFe is (LP: #346621).
diff --git a/debian/control b/debian/control
index 8715ab1..fac9352 100644
--- a/debian/control
+++ b/debian/control
@@ -4,7 +4,7 @@ Priority: optional
Maintainer: Ubuntu MOTU Developers <ubuntu-m...@lists.ubuntu.com>
XSBC-Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Uploaders: Chris Lamb <la...@debian.org>, Matthew Johnson <mj...@debian.org>
-Build-Depends: debhelper (>= 7), pkg-config, xserver-xorg-dev (>=
2:1.2.99.902), x11proto-video-dev, x11proto-core-dev, x11proto-fonts-dev,
x11proto-randr-dev (>= 1.2), x11proto-render-dev, x11proto-xext-dev, libdrm-dev
(>= 2.4.4+git+20090105+a8c5480), x11proto-xf86dri-dev, x11proto-gl-dev,
mesa-common-dev, automake, libtool, xutils-dev, xserver-xorg-dev, quilt
+Build-Depends: debhelper (>= 7), pkg-config, xserver-xorg-dev (>=
2:1.2.99.902), x11proto-video-dev, x11proto-core-dev, x11proto-fonts-dev,
x11proto-randr-dev (>= 1.2), x11proto-render-dev, x11proto-xext-dev, libdrm-dev
(>= 2.4.5-0ubuntu4), x11proto-xf86dri-dev, x11proto-gl-dev, mesa-common-dev,
automake, libtool, xutils-dev, xserver-xorg-dev, quilt
Standards-Version: 3.8.0
Homepage: http://nouveau.freedesktop.org/wiki/
Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-nouveau
commit 11be9a982073d66a68cd3db2bfc611eb58d3ea81
Author: Ben Skeggs <skeg...@gmail.com>
Date: Fri Apr 3 12:22:04 2009 +1000
nv50: fix i2c port addresses
diff --git a/src/nv50reg.h b/src/nv50reg.h
index b3125ce..4e21220 100644
--- a/src/nv50reg.h
+++ b/src/nv50reg.h
@@ -50,8 +50,8 @@
#define NV50_PCONNECTOR_I2C_PORT_1 0x0000e150
#define NV50_PCONNECTOR_I2C_PORT_2 0x0000e168
#define NV50_PCONNECTOR_I2C_PORT_3 0x0000e180
-#define NV50_PCONNECTOR_I2C_PORT_4 0x0000e254
-#define NV50_PCONNECTOR_I2C_PORT_5 0x0000e274
+#define NV50_PCONNECTOR_I2C_PORT_4 0x0000e240
+#define NV50_PCONNECTOR_I2C_PORT_5 0x0000e258
/* 0x00610024 is the state register to read, all it's bits also exist in
0x0061002C in the form of interrupt switches. */
#define NV50_DISPLAY_SUPERVISOR 0x00610024
commit e2aa03794420324ae5a682bbc415a79a4d830f7e
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Fri Apr 3 00:57:19 2009 +0100
randr12: fall back to standard timings when finding native mode (rh#492819)
diff --git a/src/nv_output.c b/src/nv_output.c
index 592b06a..efc2bc4 100644
--- a/src/nv_output.c
+++ b/src/nv_output.c
@@ -249,7 +249,6 @@ get_native_mode_from_edid(xf86OutputPtr output,
DisplayModePtr edid_modes)
DisplayModePtr mode;
for (i = 0; i < DET_TIMINGS; i++) {
- /* We only look at detailed timings atm */
if (nv_connector->edid->det_mon[i].type != DT)
continue;
/* Selecting only based on width ok? */
@@ -258,9 +257,15 @@ get_native_mode_from_edid(xf86OutputPtr output,
DisplayModePtr edid_modes)
max_v_active =
nv_connector->edid->det_mon[i].section.d_timings.v_active;
}
}
- if (!(max_h_active && max_v_active)) {
+ if (!max_h_active || !max_v_active) /* what kind of a joke EDID is
this? */
+ for (i = 0; i < STD_TIMINGS; i++)
+ if (nv_connector->edid->timings2[i].hsize >
max_h_active) {
+ max_h_active =
nv_connector->edid->timings2[i].hsize;
+ max_v_active =
nv_connector->edid->timings2[i].vsize;
+ }
+ if (!max_h_active || !max_v_active) {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "No EDID detailed timings available for finding
native mode\n");
+ "EDID too broken for finding native mode\n");
return NULL;
}
commit 6965663ddcc8dd3330842d3c4c4eb4cbf4e4fc39
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Wed Apr 1 05:38:29 2009 +0100
randr12: fix hw cursor for fully transparent pixels
ARGB8 pixels of 0x00000000 were getting bumped to 0x01000000, which was
_just_ visible as a box around the cursor
diff --git a/src/nv_cursor.c b/src/nv_cursor.c
index 2863f2f..f807fee 100644
--- a/src/nv_cursor.c
+++ b/src/nv_cursor.c
@@ -160,8 +160,8 @@ void nv_crtc_load_cursor_argb(xf86CrtcPtr crtc, CARD32
*image)
* get back to NPM images, due to limits of integer precision)
*/
alpha = (*src >> 24);
- if (alpha == 0xff)
- /* alpha == max(r,g,b) fortunately works ok for 0xff */
+ if (!alpha || alpha == 0xff)
+ /* alpha == max(r,g,b) works ok for 0x0 and 0xff */
tmp = *src;
else
tmp = ((alpha + 1) << 24) | (*src & 0xffffff);
commit d12f70cedb0ba598234bbfc26dd6beed23e3dfe7
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Sun Mar 29 00:51:05 2009 +0000
randr12: pre-nv17 digital fixes
1) set panel regs better (don't do min_front_porch adjustment)
2) scaler programming - nv11 and nv20 don't need / 2 for aspect scaling
diff --git a/src/nv_crtc.c b/src/nv_crtc.c
index 8fb22aa..0dc3e32 100644
--- a/src/nv_crtc.c
+++ b/src/nv_crtc.c
@@ -623,7 +623,9 @@ nv_crtc_mode_set_fp_regs(xf86CrtcPtr crtc, DisplayModePtr
mode, DisplayModePtr a
regp->fp_horiz_regs[FP_DISPLAY_END] = adjusted_mode->HDisplay - 1;
regp->fp_horiz_regs[FP_TOTAL] = adjusted_mode->HTotal - 1;
- if ((adjusted_mode->HSyncStart - adjusted_mode->HDisplay) >=
pNv->vbios->digital_min_front_porch)
+ if (!pNv->gf4_disp_arch ||
+ (adjusted_mode->HSyncStart - adjusted_mode->HDisplay) >=
+ pNv->vbios->digital_min_front_porch)
regp->fp_horiz_regs[FP_CRTC] = adjusted_mode->HDisplay;
else
regp->fp_horiz_regs[FP_CRTC] = adjusted_mode->HSyncStart -
pNv->vbios->digital_min_front_porch - 1;
@@ -683,6 +685,7 @@ nv_crtc_mode_set_fp_regs(xf86CrtcPtr crtc, DisplayModePtr
mode, DisplayModePtr a
* get treated the same as SCALE_FULLSCREEN */
if (nv_encoder->scaling_mode == SCALE_ASPECT && mode_ratio !=
panel_ratio) {
uint32_t diff, scale;
+ bool divide_by_2 = pNv->gf4_disp_arch;
if (mode_ratio < panel_ratio) {
/* vertical needs to expand to glass size (automatic)
@@ -691,7 +694,7 @@ nv_crtc_mode_set_fp_regs(xf86CrtcPtr crtc, DisplayModePtr
mode, DisplayModePtr a
scale = (1 << 12) * mode->VDisplay /
adjusted_mode->VDisplay;
regp->fp_debug_1 =
NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE |
- XLATE(scale, 1,
NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
+ XLATE(scale, divide_by_2,
NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
/* restrict area of screen used, horizontally */
diff = adjusted_mode->HDisplay -
@@ -707,7 +710,7 @@ nv_crtc_mode_set_fp_regs(xf86CrtcPtr crtc, DisplayModePtr
mode, DisplayModePtr a
scale = (1 << 12) * mode->HDisplay /
adjusted_mode->HDisplay;
regp->fp_debug_1 =
NV_PRAMDAC_FP_DEBUG_1_YSCALE_TESTMODE_ENABLE |
- XLATE(scale, 1,
NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
+ XLATE(scale, divide_by_2,
NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
/* restrict area of screen used, vertically */
diff = adjusted_mode->VDisplay -
commit ea567dbc7bc9c8d2ee5d7d9e0dcd33b03c638edb
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Sat Mar 28 01:58:09 2009 +0000
randr12: fix restore for cards where CR21 is not left unlocked at POST
More nv11 inspired fun. If CR21 is left without a 0xfa mask after boot,
we'd restore the old CR21 value and the subsequent restoration of VGA
CRTC values wouldn't get through.
RE'd doc of CR21 behaviour included
diff --git a/src/nouveau_hw.c b/src/nouveau_hw.c
index 6f7868f..11bae7c 100644
--- a/src/nouveau_hw.c
+++ b/src/nouveau_hw.c
@@ -845,7 +845,6 @@ static void nv_load_state_ext(NVPtr pNv, int head, struct
nouveau_mode_state *st
nvWriteVIDEO(pNv, NV_PVIDEO_UVPLANE_LIMIT(1),
pNv->VRAMPhysicalSize - 1);
nvWriteMC(pNv, NV_PBUS_POWERCTRL_2, 0);
- wr_cio_state(pNv, head, regp, NV_CIO_CRE_21);
NVWriteCRTC(pNv, head, NV_PCRTC_CURSOR_CONFIG,
regp->cursor_cfg);
NVWriteCRTC(pNv, head, NV_PCRTC_830, regp->crtc_830);
NVWriteCRTC(pNv, head, NV_PCRTC_834, regp->crtc_834);
diff --git a/src/nouveau_hw.h b/src/nouveau_hw.h
index 93872d8..b1e273f 100644
--- a/src/nouveau_hw.h
+++ b/src/nouveau_hw.h
@@ -248,6 +248,27 @@ static inline bool nv_lock_vga_crtc_base(NVPtr pNv, int
head, bool lock)
return waslocked;
}
+static inline void nv_lock_vga_crtc_shadow(NVPtr pNv, int head, int lock)
+{
+ /* shadow lock: connects 0x60?3d? regs to "real" 0x3d? regs
+ * bit7: unlocks HDT, HBS, HBE, HRS, HRE, HEB
+ * bit6: seems to have some effect on CR09 (double scan, VBS_9)
+ * bit5: unlocks HDE
+ * bit4: unlocks VDE
+ * bit3: unlocks VDT, OVL, VRS, ?VRE?, VBS, VBE, LSR, EBR
+ * bit2: same as bit 1 of 0x60?804
+ * bit0: same as bit 0 of 0x60?804
+ */
+
+ uint8_t cr21 = lock;
+
+ if (lock < 0)
+ /* 0xfa is generic "unlock all" mask */
+ cr21 = NVReadVgaCrtc(pNv, head, NV_CIO_CRE_21) | 0xfa;
+
+ NVWriteVgaCrtc(pNv, head, NV_CIO_CRE_21, cr21);
+}
+
/* renders the extended crtc regs (cr19+) on all crtcs impervious:
* immutable and unreadable
*/
diff --git a/src/nv_crtc.c b/src/nv_crtc.c
index ba50730..8fb22aa 100644
--- a/src/nv_crtc.c
+++ b/src/nv_crtc.c
@@ -469,10 +469,6 @@ nv_crtc_mode_set_regs(xf86CrtcPtr crtc, DisplayModePtr
mode)
/* Registers not directly related to the (s)vga mode */
- /* bit2 = 0 -> fine pitched crtc granularity */
- /* The rest disables double buffering on CRTC access */
- regp->CRTC[NV_CIO_CRE_21] = 0xfa;
-
/* the blob sometimes sets |= 0x10 (which is the same as setting |=
* 1 << 30 on 0x60.830), for no apparent reason */
regp->CRTC[NV_CIO_CRE_59] = 0x0;
@@ -810,11 +806,14 @@ static void nv_crtc_restore(xf86CrtcPtr crtc)
{
struct nouveau_crtc *nv_crtc = to_nouveau_crtc(crtc);
NVPtr pNv = NVPTR(crtc->scrn);
+ int head = nv_crtc->head;
+ uint8_t saved_cr21 = pNv->SavedReg.crtc_reg[head].CRTC[NV_CIO_CRE_21];
if (pNv->twoHeads)
- NVSetOwner(pNv, nv_crtc->head);
+ NVSetOwner(pNv, head);
- nouveau_hw_load_state(crtc->scrn, nv_crtc->head, &pNv->SavedReg);
+ nouveau_hw_load_state(crtc->scrn, head, &pNv->SavedReg);
+ nv_lock_vga_crtc_shadow(pNv, head, saved_cr21);
nv_crtc->last_dpms = NV_DPMS_CLEARED;
}
@@ -839,6 +838,7 @@ static void nv_crtc_prepare(xf86CrtcPtr crtc)
NVBlankScreen(pNv, nv_crtc->head, true);
/* Some more preperation. */
+ nv_lock_vga_crtc_shadow(pNv, nv_crtc->head, -1);
NVWriteCRTC(pNv, nv_crtc->head, NV_PCRTC_CONFIG,
NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA);
if (pNv->Architecture == NV_ARCH_40) {
uint32_t reg900 = NVReadRAMDAC(pNv, nv_crtc->head,
NV_PRAMDAC_900);
diff --git a/src/nvreg.h b/src/nvreg.h
index 891c7e5..ff5662e 100644
--- a/src/nvreg.h
+++ b/src/nvreg.h
@@ -247,7 +247,7 @@
# define NV_CIO_SR_UNLOCK_RW_VALUE 0x57
# define NV_CIO_SR_LOCK_VALUE 0x99
# define NV_CIO_CRE_FFLWM__INDEX 0x20 /* fifo low water mark
*/
-# define NV_CIO_CRE_21 0x21 /* referred to by some
.scp as `shadow lock' */
+# define NV_CIO_CRE_21 0x21 /* vga shadow crtc lock
*/
# define NV_CIO_CRE_LSR_INDEX 0x25 /* ? */
# define NV_CIO_CRE_LSR_VDT_10 0:0
# define NV_CIO_CRE_LSR_VDE_10 1:1
commit bd263d83139fcc93b967c71c99fd5e63e1ba6315
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Fri Mar 27 18:27:18 2009 +0000
randr12: make nv11 dvi work for both crtcs
diff --git a/src/nv_output.c b/src/nv_output.c
index 7b3b2dd..592b06a 100644
--- a/src/nv_output.c
+++ b/src/nv_output.c
@@ -691,8 +691,15 @@ nv_output_prepare(xf86OutputPtr output)
*lcdi = 0x3;
if (nv_encoder->dcb->location == DCB_LOC_ON_CHIP)
*lcdi |= head ? 0x0 : 0x8;
- else
+ else if (pNv->gf4_disp_arch)
*lcdi |= (nv_encoder->dcb->or << 4) & 0x30;
+ else if (pNv->twoHeads)
+ /* the guess here is that 0x10 gets set when
+ * the output is not on its "natural" crtc
+ * (lvds naturally on head b, tmds head a)
+ */
+ *lcdi |= (head + 1 != nv_encoder->dcb->or) ?
+ 0x10 : 0x00;
}
}
}
@@ -864,18 +871,22 @@ tmds_encoder_dpms(ScrnInfoPtr pScrn, struct
nouveau_encoder *nv_encoder, xf86Crt
dpms_update_fp_control(pScrn, nv_encoder, crtc, mode);
- if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP) {
- struct nouveau_crtc *nv_crtc;
- int i;
-
+ if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP && pNv->twoHeads) {
if (mode == DPMSModeOn) {
- nv_crtc = to_nouveau_crtc(crtc);
- NVWriteVgaCrtc(pNv, nv_crtc->head,
NV_CIO_CRE_LCD__INDEX,
-
pNv->ModeReg.crtc_reg[nv_crtc->head].CRTC[NV_CIO_CRE_LCD__INDEX]);
- } else
- for (i = 0; i <= pNv->twoHeads; i++)
+ int head = to_nouveau_crtc(crtc)->head;
+
+ NVWriteVgaCrtc(pNv, head, NV_CIO_CRE_LCD__INDEX,
+
pNv->ModeReg.crtc_reg[head].CRTC[NV_CIO_CRE_LCD__INDEX]);
+ } else {
+ int i;
+ uint8_t mask = pNv->gf4_disp_arch ?
+ ~((nv_encoder->dcb->or << 4) & 0x30) :
+ ~0x10;
+
+ for (i = 0; i < 2; i++)
NVWriteVgaCrtc(pNv, i, NV_CIO_CRE_LCD__INDEX,
- NVReadVgaCrtc(pNv, i,
NV_CIO_CRE_LCD__INDEX) & ~((nv_encoder->dcb->or << 4) & 0x30));
+ NVReadVgaCrtc(pNv, i,
NV_CIO_CRE_LCD__INDEX) & mask);
+ }
}
}
commit 52c287dc64a97a750eb953ac5f725d794cbf0c64
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Fri Mar 27 00:23:04 2009 +0000
Every card since nv5 can do panels
We'll only try to do ones using scripts atm though
Note that as we don't have a load detect function for pre-nv17 you'll
likely get a 1024x768 mode set up on VGA-0 even if only the DVI output
is plugged. Unclear if this is a bug or feature :)
diff --git a/src/nv_bios.c b/src/nv_bios.c
index dda246d..7da48d2 100644
--- a/src/nv_bios.c
+++ b/src/nv_bios.c
@@ -36,6 +36,7 @@
#define NV_CIO_CRE_44_HEADB 0x3
#define FEATURE_MOBILE 0x10 /* also FEATURE_QUADRO for BMP */
#define LEGACY_I2C_CRT 0x80
+#define LEGACY_I2C_PANEL 0x81
#define BIOSLOG(sip, fmt, arg...) NV_DEBUG(sip, fmt, ##arg)
#define LOG_OLD_VALUE(x) //x
@@ -3039,10 +3040,13 @@ int run_tmds_table(ScrnInfoPtr pScrn, struct dcb_entry
*dcbent, int head, int px
NVPtr pNv = NVPTR(pScrn);
struct nvbios *bios = &pNv->VBIOS;
+ int cv = bios->pub.chip_version;
uint16_t clktable = 0, scriptptr;
uint32_t sel_clk_binding, sel_clk;
- if (dcbent->location != DCB_LOC_ON_CHIP)
+ /* pre-nv17 off-chip tmds uses scripts, post nv17 doesn't */
+ if (cv >= 0x17 && cv != 0x1a && cv != 0x20 &&
+ dcbent->location != DCB_LOC_ON_CHIP)
return 0;
switch (ffs(dcbent->or)) {
@@ -4025,6 +4029,32 @@ static void fabricate_vga_output(struct parsed_dcb *dcb,
int i2c, int heads)
/* "or" mostly unused in early gen crt modesetting, 0 is fine */
}
+static void fabricate_dvi_i_output(struct parsed_dcb *dcb, bool twoHeads)
+{
+ struct dcb_entry *entry = new_dcb_entry(dcb);
+
+ entry->type = 2;
+ entry->i2c_index = LEGACY_I2C_PANEL;
+ entry->heads = twoHeads ? 3 : 1;
+ entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
+ entry->or = 1; /* naturally on head A; see setting of CRE_LCD__INDEX */
+ entry->duallink_possible = false; /* SiI164 and co. are single link */
+
+#if 0
+ /* for dvi-a either crtc probably works, but my card appears to only
+ * support dvi-d. "nvidia" still attempts to program it for dvi-a,
+ * doing the full fp output setup (program 0x6808.. fp dimension regs,
+ * setting 0x680848 to 0x10000111 to enable, maybe setting 0x680880);
+ * the monitor picks up the mode res ok and lights up, but no pixel
+ * data appears, so the board manufacturer probably connected up the
+ * sync lines, but missed the video traces / components
+ *
+ * with this introduction, dvi-a left as an exercise for the reader.
+ */
+ fabricate_vga_output(dcb, LEGACY_I2C_PANEL, entry->heads);
+#endif
+}
+
static bool
parse_dcb20_entry(ScrnInfoPtr pScrn, struct bios_parsed_dcb *bdcb,
uint32_t conn, uint32_t conf, struct dcb_entry *entry)
@@ -4219,7 +4249,7 @@ void merge_like_dcb_entries(ScrnInfoPtr pScrn, struct
parsed_dcb *dcb)
dcb->entries = newentries;
}
-static int parse_dcb_table(ScrnInfoPtr pScrn, struct nvbios *bios)
+static int parse_dcb_table(ScrnInfoPtr pScrn, struct nvbios *bios, bool
twoHeads)
{
struct bios_parsed_dcb *bdcb = &bios->bdcb;
struct parsed_dcb *dcb;
@@ -4299,8 +4329,11 @@ static int parse_dcb_table(ScrnInfoPtr pScrn, struct
nvbios *bios)
* v1.1 (NV5+, maybe some NV4) is entirely unhelpful
*/
NV_TRACEWARN(pScrn, "No useful information in BIOS output
table; "
- "assuming a CRT output exists\n");
+ "adding all possible outputs\n");
fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
+ if (bios->tmds.output0_script_ptr ||
+ bios->tmds.output1_script_ptr)
+ fabricate_dvi_i_output(dcb, twoHeads);
return 0;
}
@@ -4349,9 +4382,12 @@ static void fixup_legacy_i2c(struct nvbios *bios)
struct parsed_dcb *dcb = &bios->bdcb.dcb;
int i;
- for (i = 0; i < dcb->entries; i++)
+ for (i = 0; i < dcb->entries; i++) {
if (dcb->entry[i].i2c_index == LEGACY_I2C_CRT)
dcb->entry[i].i2c_index = bios->legacy.i2c_indices.crt;
+ if (dcb->entry[i].i2c_index == LEGACY_I2C_PANEL)
+ dcb->entry[i].i2c_index =
bios->legacy.i2c_indices.panel;
+ }
}
static int load_nv17_hwsq_ucode_entry(ScrnInfoPtr pScrn, struct nvbios *bios,
uint16_t hwsq_offset, int entry)
@@ -4523,7 +4559,7 @@ int NVParseBios(ScrnInfoPtr pScrn)
return -ENODEV;
if ((ret = nouveau_parse_vbios_struct(pScrn)))
return ret;
- if ((ret = parse_dcb_table(pScrn, bios)))
+ if ((ret = parse_dcb_table(pScrn, bios, pNv->twoHeads)))
return ret;
fixup_legacy_i2c(bios);
commit 3d371a78bc9522e9a1b2c967957a090bb527a30c
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Thu Mar 26 22:21:57 2009 +0000
randr12: enable tmds reg access on pre-nv17
I think this nv11 hates me
diff --git a/src/nouveau_hw.c b/src/nouveau_hw.c
index d96ebb4..6f7868f 100644
--- a/src/nouveau_hw.c
+++ b/src/nouveau_hw.c
@@ -647,6 +647,11 @@ nv_save_state_ramdac(ScrnInfoPtr pScrn, int head, struct
nouveau_mode_state *sta
regp->fp_control = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_TG_CONTROL);
regp->fp_debug_0 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_0);
+ if (!pNv->gf4_disp_arch && head == 0)
+ /* early chips don't allow access to PRAMDAC_TMDS_* without
+ * the head A FPCLK on (nv11 even locks up) */
+ NVWriteRAMDAC(pNv, 0, NV_PRAMDAC_FP_DEBUG_0, regp->fp_debug_0 &
+ ~NV_PRAMDAC_FP_DEBUG_0_PWRDOWN_FPCLK);
regp->fp_debug_1 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_1);
regp->fp_debug_2 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_2);
diff --git a/src/nvreg.h b/src/nvreg.h
index 76ceda1..891c7e5 100644
--- a/src/nvreg.h
+++ b/src/nvreg.h
@@ -387,6 +387,7 @@
# define NV_PRAMDAC_FP_DEBUG_0_YINTERP_BILINEAR (1 << 12)
# define NV_PRAMDAC_FP_DEBUG_0_XWEIGHT_ROUND (1 << 20)
# define NV_PRAMDAC_FP_DEBUG_0_YWEIGHT_ROUND (1 << 24)
+# define NV_PRAMDAC_FP_DEBUG_0_PWRDOWN_FPCLK (1 << 28)
#define NV_PRAMDAC_FP_DEBUG_1 0x00680884
# define NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE 11:0
# define NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE (1 << 12)
commit 1bb85c8020802719e82c1335a18df9367215a8ff
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Wed Apr 1 04:09:09 2009 +0100
randr12: reorder ramdac reg access
diff --git a/src/nouveau_hw.c b/src/nouveau_hw.c
index 38bf942..d96ebb4 100644
--- a/src/nouveau_hw.c
+++ b/src/nouveau_hw.c
@@ -613,10 +613,15 @@ nv_save_state_ramdac(ScrnInfoPtr pScrn, int head, struct
nouveau_mode_state *sta
NVCrtcRegPtr regp = &state->crtc_reg[head];
int i;
+ if (pNv->Architecture >= NV_ARCH_10)
+ regp->nv10_cursync = NVReadRAMDAC(pNv, head,
NV_RAMDAC_NV10_CURSYNC);
+
nouveau_hw_get_pllvals(pScrn, head ? VPLL2 : VPLL1, ®p->pllvals);
+ state->pllsel = NVReadRAMDAC(pNv, 0, NV_PRAMDAC_PLL_COEFF_SELECT);
if (pNv->twoHeads)
state->sel_clk = NVReadRAMDAC(pNv, 0, NV_PRAMDAC_SEL_CLK);
- state->pllsel = NVReadRAMDAC(pNv, 0, NV_PRAMDAC_PLL_COEFF_SELECT);
+ if (pNv->NVArch == 0x11)
+ regp->dither = NVReadRAMDAC(pNv, head, NV_RAMDAC_DITHER_NV11);
regp->ramdac_gen_ctrl = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_GENERAL_CONTROL);
@@ -625,19 +630,13 @@ nv_save_state_ramdac(ScrnInfoPtr pScrn, int head, struct
nouveau_mode_state *sta
if (pNv->NVArch >= 0x30)
regp->ramdac_634 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_634);
- regp->fp_control = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_TG_CONTROL);
- regp->fp_debug_0 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_DEBUG_0);
- regp->fp_debug_1 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_DEBUG_1);
- regp->fp_debug_2 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_DEBUG_2);
+ for (i = 0; i < 7; i++) {
+ uint32_t ramdac_reg = NV_PRAMDAC_FP_VDISPLAY_END + (i * 4);
- if (pNv->Architecture == NV_ARCH_40) {
- regp->ramdac_a20 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A20);
- regp->ramdac_a24 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A24);
- regp->ramdac_a34 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A34);
+ regp->fp_vert_regs[i] = NVReadRAMDAC(pNv, head, ramdac_reg);
+ regp->fp_horiz_regs[i] = NVReadRAMDAC(pNv, head, ramdac_reg +
0x20);
}
- if (pNv->NVArch == 0x11)
- regp->dither = NVReadRAMDAC(pNv, head, NV_RAMDAC_DITHER_NV11);
if (pNv->gf4_disp_arch) {
regp->dither = NVReadRAMDAC(pNv, head, NV_RAMDAC_FP_DITHER);
for (i = 0; i < 3; i++) {
@@ -645,19 +644,16 @@ nv_save_state_ramdac(ScrnInfoPtr pScrn, int head, struct
nouveau_mode_state *sta
regp->dither_regs[i + 3] = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_85C + i * 4);
}
}
- if (pNv->Architecture >= NV_ARCH_10)
- regp->nv10_cursync = NVReadRAMDAC(pNv, head,
NV_RAMDAC_NV10_CURSYNC);
-
- /* The regs below are 0 for non-flatpanels, so you can load and save
them */
- for (i = 0; i < 7; i++) {
- uint32_t ramdac_reg = NV_PRAMDAC_FP_HDISPLAY_END + (i * 4);
- regp->fp_horiz_regs[i] = NVReadRAMDAC(pNv, head, ramdac_reg);
- }
+ regp->fp_control = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_TG_CONTROL);
+ regp->fp_debug_0 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_0);
+ regp->fp_debug_1 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_1);
+ regp->fp_debug_2 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_2);
- for (i = 0; i < 7; i++) {
- uint32_t ramdac_reg = NV_PRAMDAC_FP_VDISPLAY_END + (i * 4);
- regp->fp_vert_regs[i] = NVReadRAMDAC(pNv, head, ramdac_reg);
+ if (pNv->Architecture == NV_ARCH_40) {
+ regp->ramdac_a20 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A20);
+ regp->ramdac_a24 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A24);
+ regp->ramdac_a34 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A34);
}
}
@@ -668,12 +664,15 @@ static void nv_load_state_ramdac(ScrnInfoPtr pScrn, int
head, struct nouveau_mod
uint32_t pllreg = head ? NV_RAMDAC_VPLL2 : NV_PRAMDAC_VPLL_COEFF;
int i;
- /* This sequence is important, the NV28 is very sensitive in this area.
*/
- /* Keep pllsel last and sel_clk first. */
- if (pNv->twoHeads)
- NVWriteRAMDAC(pNv, 0, NV_PRAMDAC_SEL_CLK, state->sel_clk);
+ if (pNv->Architecture >= NV_ARCH_10)
+ NVWriteRAMDAC(pNv, head, NV_RAMDAC_NV10_CURSYNC,
regp->nv10_cursync);
+
nouveau_hw_setpll(pScrn, pllreg, ®p->pllvals);
NVWriteRAMDAC(pNv, 0, NV_PRAMDAC_PLL_COEFF_SELECT, state->pllsel);
+ if (pNv->twoHeads)
+ NVWriteRAMDAC(pNv, 0, NV_PRAMDAC_SEL_CLK, state->sel_clk);
+ if (pNv->NVArch == 0x11)
+ NVWriteRAMDAC(pNv, head, NV_RAMDAC_DITHER_NV11, regp->dither);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_GENERAL_CONTROL,
regp->ramdac_gen_ctrl);
@@ -681,19 +680,14 @@ static void nv_load_state_ramdac(ScrnInfoPtr pScrn, int
head, struct nouveau_mod
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_630, regp->ramdac_630);
if (pNv->NVArch >= 0x30)
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_634, regp->ramdac_634);
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_TG_CONTROL,
regp->fp_control);
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_0,
regp->fp_debug_0);
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_1,
regp->fp_debug_1);
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_2,
regp->fp_debug_2);
- if (pNv->Architecture == NV_ARCH_40) {
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A20, regp->ramdac_a20);
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A24, regp->ramdac_a24);
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A34, regp->ramdac_a34);
+ for (i = 0; i < 7; i++) {
+ uint32_t ramdac_reg = NV_PRAMDAC_FP_VDISPLAY_END + (i * 4);
+
+ NVWriteRAMDAC(pNv, head, ramdac_reg, regp->fp_vert_regs[i]);
+ NVWriteRAMDAC(pNv, head, ramdac_reg + 0x20,
regp->fp_horiz_regs[i]);
}
- if (pNv->NVArch == 0x11)
- NVWriteRAMDAC(pNv, head, NV_RAMDAC_DITHER_NV11, regp->dither);
if (pNv->gf4_disp_arch) {
NVWriteRAMDAC(pNv, head, NV_RAMDAC_FP_DITHER, regp->dither);
for (i = 0; i < 3; i++) {
@@ -701,19 +695,16 @@ static void nv_load_state_ramdac(ScrnInfoPtr pScrn, int
head, struct nouveau_mod
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_85C + i * 4,
regp->dither_regs[i + 3]);
}
}
- if (pNv->Architecture >= NV_ARCH_10)
- NVWriteRAMDAC(pNv, head, NV_RAMDAC_NV10_CURSYNC,
regp->nv10_cursync);
- /* The regs below are 0 for non-flatpanels, so you can load and save
them */
-
- for (i = 0; i < 7; i++) {
- uint32_t ramdac_reg = NV_PRAMDAC_FP_HDISPLAY_END + (i * 4);
- NVWriteRAMDAC(pNv, head, ramdac_reg, regp->fp_horiz_regs[i]);
- }
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_TG_CONTROL, regp->fp_control);
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_0, regp->fp_debug_0);
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_1, regp->fp_debug_1);
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_2, regp->fp_debug_2);
- for (i = 0; i < 7; i++) {
- uint32_t ramdac_reg = NV_PRAMDAC_FP_VDISPLAY_END + (i * 4);
- NVWriteRAMDAC(pNv, head, ramdac_reg, regp->fp_vert_regs[i]);
+ if (pNv->Architecture == NV_ARCH_40) {
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A20, regp->ramdac_a20);
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A24, regp->ramdac_a24);
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A34, regp->ramdac_a34);
}
}
commit 4465fddb2467ad9d923120a2fd2c648222603771
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Wed Apr 1 04:10:18 2009 +0100
randr12: remove nv30 special case
0x68?89? are just an alternative way to set scaling (set | 0x40 on 0x68.880,
then horiz scaling in 0x68.898, vert in 0x68.89c) and afaict don't have any
special significance on nv30
diff --git a/src/nouveau_hw.c b/src/nouveau_hw.c
index 70f4c8c..38bf942 100644
--- a/src/nouveau_hw.c
+++ b/src/nouveau_hw.c
@@ -685,10 +685,6 @@ static void nv_load_state_ramdac(ScrnInfoPtr pScrn, int
head, struct nouveau_mod
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_0,
regp->fp_debug_0);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_1,
regp->fp_debug_1);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_2,
regp->fp_debug_2);
- if (pNv->NVArch == 0x30) { /* For unknown purposes. */
- uint32_t reg890 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_890);
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_89C, reg890);
- }
if (pNv->Architecture == NV_ARCH_40) {
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A20, regp->ramdac_a20);
diff --git a/src/nvreg.h b/src/nvreg.h
index 6f142b3..76ceda1 100644
--- a/src/nvreg.h
+++ b/src/nvreg.h
@@ -395,10 +395,6 @@
#define NV_PRAMDAC_FP_DEBUG_2 0x00680888
#define NV_PRAMDAC_FP_DEBUG_3 0x0068088C
-/* Some unknown regs, purely for NV30 it seems. */
-#define NV_PRAMDAC_890 0x00680890
-#define NV_PRAMDAC_89C 0x0068089C
-
/* see NV_PRAMDAC_INDIR_TMDS in rules.xml */
#define NV_PRAMDAC_FP_TMDS_CONTROL 0x006808b0
# define NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE (1 << 16)
commit 72eced5eeeef438979dff06b6c1cbaa120738cfe
Author: Stuart Bennett <stu...@freedesktop.org>
Date: Wed Apr 1 03:12:30 2009 +0100
randr12: fix/improve a load of version/feature tests
Main improvement is introduction of flag for nv17+ display architecture
Other version fixes include:
* allow access of fp control regs on all cards (defined since nv4)
* only read crtc_850 and gpio_ext on nv40+, since only written on nv40+
* set dither state on all versions (only written out on relevant cards)
* PRAMDAC_DACCLK is only defined/usable on nv17+
* no point saving the lvds/tmds head for restore if there's only one head
* fix a bunch of places the nforce (0x1a) case had been missed
diff --git a/src/nouveau_calc.c b/src/nouveau_calc.c
index 9173e90..e060915 100644
--- a/src/nouveau_calc.c
+++ b/src/nouveau_calc.c
@@ -415,7 +415,7 @@ static int getMNP_single(ScrnInfoPtr pScrn, struct pll_lims
*pll_lim, int clk,
* returns calculated clock
*/
- int chip_version = NVPTR(pScrn)->vbios->chip_version;
+ int cv = NVPTR(pScrn)->vbios->chip_version;
int minvco = pll_lim->vco1.minfreq, maxvco = pll_lim->vco1.maxfreq;
int minM = pll_lim->vco1.min_m, maxM = pll_lim->vco1.max_m;
int minN = pll_lim->vco1.min_n, maxN = pll_lim->vco1.max_n;
@@ -429,13 +429,13 @@ static int getMNP_single(ScrnInfoPtr pScrn, struct
pll_lims *pll_lim, int clk,
/* this division verified for nv20, nv18, nv28 (Haiku), and nv34 */
/* possibly correlated with introduction of 27MHz crystal */
- if (chip_version <= 0x16 || chip_version == 0x20) {
+ if (cv < 0x17 || cv == 0x1a || cv == 0x20) {
if (clk > 250000)
maxM = 6;
if (clk > 340000)
maxM = 2;
maxlog2P = 4;
- } else if (chip_version < 0x40) {
+ } else if (cv < 0x40) {
if (clk > 150000)
maxM = 6;
if (clk > 200000)
diff --git a/src/nouveau_hw.c b/src/nouveau_hw.c
index 067e3dc..70f4c8c 100644
--- a/src/nouveau_hw.c
+++ b/src/nouveau_hw.c
@@ -107,7 +107,7 @@ static int powerctrl_1_shift(int chip_version, int reg)
{
int shift = -4;
- if (chip_version < 0x17 || chip_version == 0x20)
+ if (chip_version < 0x17 || chip_version == 0x1a || chip_version == 0x20)
return shift;
switch (reg) {
@@ -620,25 +620,25 @@ nv_save_state_ramdac(ScrnInfoPtr pScrn, int head, struct
nouveau_mode_state *sta
regp->ramdac_gen_ctrl = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_GENERAL_CONTROL);
- if (pNv->twoHeads) {
- if (pNv->NVArch >= 0x17)
- regp->ramdac_630 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_630);
- if (pNv->NVArch >= 0x30)
- regp->ramdac_634 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_634);
+ if (pNv->gf4_disp_arch)
+ regp->ramdac_630 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_630);
+ if (pNv->NVArch >= 0x30)
+ regp->ramdac_634 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_634);
regp->fp_control = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_TG_CONTROL);
regp->fp_debug_0 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_DEBUG_0);
regp->fp_debug_1 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_DEBUG_1);
regp->fp_debug_2 = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_FP_DEBUG_2);
+ if (pNv->Architecture == NV_ARCH_40) {
regp->ramdac_a20 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A20);
regp->ramdac_a24 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A24);
regp->ramdac_a34 = NVReadRAMDAC(pNv, head, NV_PRAMDAC_A34);
}
- if (pNv->NVArch == 0x11) {
+ if (pNv->NVArch == 0x11)
regp->dither = NVReadRAMDAC(pNv, head, NV_RAMDAC_DITHER_NV11);
- } else if (pNv->twoHeads) {
+ if (pNv->gf4_disp_arch) {
regp->dither = NVReadRAMDAC(pNv, head, NV_RAMDAC_FP_DITHER);
for (i = 0; i < 3; i++) {
regp->dither_regs[i] = NVReadRAMDAC(pNv, head,
NV_PRAMDAC_850 + i * 4);
@@ -677,11 +677,10 @@ static void nv_load_state_ramdac(ScrnInfoPtr pScrn, int
head, struct nouveau_mod
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_GENERAL_CONTROL,
regp->ramdac_gen_ctrl);
- if (pNv->twoHeads) {
- if (pNv->NVArch >= 0x17)
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_630,
regp->ramdac_630);
- if (pNv->NVArch >= 0x30)
- NVWriteRAMDAC(pNv, head, NV_PRAMDAC_634,
regp->ramdac_634);
+ if (pNv->gf4_disp_arch)
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_630, regp->ramdac_630);
+ if (pNv->NVArch >= 0x30)
+ NVWriteRAMDAC(pNv, head, NV_PRAMDAC_634, regp->ramdac_634);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_TG_CONTROL,
regp->fp_control);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_0,
regp->fp_debug_0);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_FP_DEBUG_1,
regp->fp_debug_1);
@@ -691,6 +690,7 @@ static void nv_load_state_ramdac(ScrnInfoPtr pScrn, int
head, struct nouveau_mod
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_89C, reg890);
}
+ if (pNv->Architecture == NV_ARCH_40) {
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A20, regp->ramdac_a20);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A24, regp->ramdac_a24);
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_A34, regp->ramdac_a34);
@@ -698,7 +698,7 @@ static void nv_load_state_ramdac(ScrnInfoPtr pScrn, int
head, struct nouveau_mod
if (pNv->NVArch == 0x11)
NVWriteRAMDAC(pNv, head, NV_RAMDAC_DITHER_NV11, regp->dither);
- else if (pNv->twoHeads) {
+ if (pNv->gf4_disp_arch) {
NVWriteRAMDAC(pNv, head, NV_RAMDAC_FP_DITHER, regp->dither);
for (i = 0; i < 3; i++) {
NVWriteRAMDAC(pNv, head, NV_PRAMDAC_850 + i * 4,
regp->dither_regs[i]);
@@ -814,8 +814,7 @@ nv_save_state_ext(NVPtr pNv, int head, struct
nouveau_mode_state *state)
rd_cio_state(pNv, head, regp, NV_CIO_CRE_4B);
rd_cio_state(pNv, head, regp, NV_CIO_CRE_TVOUT_LATENCY);
}
- /* NV11 and NV20 don't have this, they stop at 0x52. */
- if (pNv->NVArch >= 0x17 && pNv->twoHeads) {
+ if (pNv->gf4_disp_arch) {
rd_cio_state(pNv, head, regp, NV_CIO_CRE_53);
rd_cio_state(pNv, head, regp, NV_CIO_CRE_54);
@@ -901,8 +900,7 @@ static void nv_load_state_ext(NVPtr pNv, int head, struct
nouveau_mode_state *st
wr_cio_state(pNv, head, regp, NV_CIO_CRE_4B);
wr_cio_state(pNv, head, regp, NV_CIO_CRE_TVOUT_LATENCY);
}
- /* NV11 and NV20 stop at 0x52. */
- if (pNv->NVArch >= 0x17 && pNv->twoHeads) {
+ if (pNv->gf4_disp_arch) {
wr_cio_state(pNv, head, regp, NV_CIO_CRE_53);
wr_cio_state(pNv, head, regp, NV_CIO_CRE_54);
diff --git a/src/nv_crtc.c b/src/nv_crtc.c
index 8d2bec5..ba50730 100644
--- a/src/nv_crtc.c
+++ b/src/nv_crtc.c
@@ -39,7 +39,7 @@ void nv_crtc_set_digital_vibrance(xf86CrtcPtr crtc, int level)
NVCrtcRegPtr regp = &pNv->ModeReg.crtc_reg[nv_crtc->head];
regp->CRTC[NV_CIO_CRE_CSB] = nv_crtc->saturation = level;
- if (nv_crtc->saturation && pNv->NVArch >= 0x17 && pNv->NVArch != 0x20) {
+ if (nv_crtc->saturation && pNv->gf4_disp_arch) {
regp->CRTC[NV_CIO_CRE_CSB] = 0x80;
regp->CRTC[NV_CIO_CRE_5B] = nv_crtc->saturation << 2;
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_5B);
@@ -538,11 +538,11 @@ nv_crtc_mode_set_regs(xf86CrtcPtr crtc, DisplayModePtr
mode)
regp->crtc_830 = mode->CrtcVDisplay - 3;
regp->crtc_834 = mode->CrtcVDisplay - 1;
- if (pNv->twoHeads)
+ if (pNv->Architecture == NV_ARCH_40)
/* This is what the blob does */
regp->crtc_850 = NVReadCRTC(pNv, 0, NV_PCRTC_850);
- if (pNv->twoHeads)
+ if (pNv->Architecture == NV_ARCH_40)
regp->gpio_ext = NVReadCRTC(pNv, 0, NV_PCRTC_GPIO_EXT);
regp->crtc_cfg = NV_PCRTC_CONFIG_START_ADDRESS_HSYNC;
@@ -721,33 +721,29 @@ nv_crtc_mode_set_fp_regs(xf86CrtcPtr crtc, DisplayModePtr
mode, DisplayModePtr a
}
}
- /* Flatpanel support needs at least a NV10 */
- if (pNv->twoHeads) {
- /* Output property. */
- if (nv_encoder && nv_encoder->dithering) {
- if (pNv->NVArch == 0x11)
- regp->dither = savep->dither | 0x00010000;
- else {
- int i;
- regp->dither = savep->dither | 0x00000001;
- for (i = 0; i < 3; i++) {
- regp->dither_regs[i] = 0xe4e4e4e4;
- regp->dither_regs[i + 3] = 0x44444444;
- }
+ /* Output property. */
+ if (nv_encoder && nv_encoder->dithering) {
+ if (pNv->NVArch == 0x11)
+ regp->dither = savep->dither | 0x00010000;
+ else {
+ int i;
+ regp->dither = savep->dither | 0x00000001;
+ for (i = 0; i < 3; i++) {
+ regp->dither_regs[i] = 0xe4e4e4e4;
+ regp->dither_regs[i + 3] = 0x44444444;
}
- } else {
- if (pNv->NVArch != 0x11) {
- /* reset them */
- int i;
- for (i = 0; i < 3; i++) {
- regp->dither_regs[i] =
savep->dither_regs[i];
- regp->dither_regs[i + 3] =
savep->dither_regs[i + 3];
- }
+ }
+ } else {
+ if (pNv->NVArch != 0x11) {
+ /* reset them */
+ int i;
+ for (i = 0; i < 3; i++) {
+ regp->dither_regs[i] = savep->dither_regs[i];
+ regp->dither_regs[i + 3] = savep->dither_regs[i
+ 3];
}
- regp->dither = savep->dither;
}
- } else
regp->dither = savep->dither;
+ }
}
/**
diff --git a/src/nv_output.c b/src/nv_output.c
index 49ac1eb..7b3b2dd 100644
--- a/src/nv_output.c
+++ b/src/nv_output.c
@@ -75,14 +75,12 @@ nv_load_detect(ScrnInfoPtr pScrn, struct nouveau_encoder
*nv_encoder)
NVWriteRAMDAC(pNv, 0, NV_PRAMDAC_TEST_CONTROL + regoffset,
saved_rtest_ctrl &
~NV_PRAMDAC_TEST_CONTROL_PWRDWN_DAC_OFF);
- if (pNv->NVArch >= 0x17) {
- saved_powerctrl_2 = nvReadMC(pNv, NV_PBUS_POWERCTRL_2);
+ saved_powerctrl_2 = nvReadMC(pNv, NV_PBUS_POWERCTRL_2);
- nvWriteMC(pNv, NV_PBUS_POWERCTRL_2, saved_powerctrl_2 &
0xd7ffffff);
- if (regoffset == 0x68) {
- saved_powerctrl_4 = nvReadMC(pNv, NV_PBUS_POWERCTRL_4);
- nvWriteMC(pNv, NV_PBUS_POWERCTRL_4, saved_powerctrl_4 &
0xffffffcf);
- }
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
