debian/changelog | 8
debian/control | 2
debian/rules | 2
debian/xsfbs/repack.sh | 32 +++
debian/xsfbs/xsfbs.mk | 47 +----
debian/xsfbs/xsfbs.sh | 405 ++++++++++++++++++++++---------------------------
6 files changed, 240 insertions(+), 256 deletions(-)
New commits:
commit a083ba676f35b360e0e85cc4cddfb6db87c415cd
Author: Julien Cristau <jcris...@debian.org>
Date: Wed Apr 1 18:59:50 2009 +0200
Prepare changelog for upload
diff --git a/debian/changelog b/debian/changelog
index 48a3206..9561e8f 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-xserver-xorg-input-elographics (1:1.2.3-1) UNRELEASED; urgency=low
+xserver-xorg-input-elographics (1:1.2.3-1) experimental; urgency=low
[ Timo Aaltonen ]
* New upstream release.
@@ -8,7 +8,7 @@ xserver-xorg-input-elographics (1:1.2.3-1) UNRELEASED;
urgency=low
[ Julien Cristau ]
* Build against xserver >= 1.6 rc1.
- -- Timo Aaltonen <tjaal...@ubuntu.com> Thu, 26 Feb 2009 17:52:10 +0200
+ -- Julien Cristau <jcris...@debian.org> Wed, 01 Apr 2009 18:59:46 +0200
xserver-xorg-input-elographics (1:1.2.1-1) unstable; urgency=low
commit 23b9b680ae093787abe6974bb0fb3cd0e6bb8382
Author: Julien Cristau <jcris...@debian.org>
Date: Wed Apr 1 18:59:42 2009 +0200
Build against xserver >= 1.6 rc1.
diff --git a/debian/changelog b/debian/changelog
index 1d6c4d2..48a3206 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,9 +1,13 @@
xserver-xorg-input-elographics (1:1.2.3-1) UNRELEASED; urgency=low
+ [ Timo Aaltonen ]
* New upstream release.
* Run autoreconf at build time; build-depend on automake, libtool
and xutils-dev
+ [ Julien Cristau ]
+ * Build against xserver >= 1.6 rc1.
+
-- Timo Aaltonen <tjaal...@ubuntu.com> Thu, 26 Feb 2009 17:52:10 +0200
xserver-xorg-input-elographics (1:1.2.1-1) unstable; urgency=low
diff --git a/debian/control b/debian/control
index a188e60..718f831 100644
--- a/debian/control
+++ b/debian/control
@@ -6,7 +6,7 @@ Uploaders: David Nusinow <dnusi...@debian.org>, Julien Cristau
<jcris...@debian.
Build-Depends:
debhelper (>= 5),
pkg-config,
- xserver-xorg-dev (>= 2:1.4),
+ xserver-xorg-dev (>= 2:1.5.99.901),
x11proto-input-dev,
x11proto-core-dev,
x11proto-randr-dev,
commit 87a18c42c79e4f7984a52fb7d2391224d03008ca
Author: Julien Cristau <jcris...@debian.org>
Date: Wed Apr 1 18:56:45 2009 +0200
Don't try to apply patches, there aren't any
diff --git a/debian/rules b/debian/rules
index 288d757..0d32103 100755
--- a/debian/rules
+++ b/debian/rules
@@ -31,7 +31,7 @@ endif
# kbd_drv.a isn't phenomenally useful; kbd_drv.so more so
confflags += --disable-static
-configure: $(STAMP_DIR)/patch
+configure:
autoreconf -vfi
obj-$(DEB_BUILD_GNU_TYPE)/config.status: configure
commit 2ed171f9f390de4e97141c0016d3ba615e8c943e
Author: Julien Cristau <jcris...@debian.org>
Date: Tue Feb 17 17:20:42 2009 +0100
xsfbs.sh: kill {,de}register_x_lib_dir_with_ld_so
libx11's postinst was the only post-sarge user, and it's gone now.
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
index 72efa95..8840ff9 100644
--- a/debian/xsfbs/xsfbs.sh
+++ b/debian/xsfbs/xsfbs.sh
@@ -719,72 +719,6 @@ run () {
fi
}
-register_x_lib_dir_with_ld_so () {
- # syntax: register_x_lib_dir_with_ld_so
- #
- # Configure the dynamic loader ld.so to search /usr/X11R6/lib for shared
- # libraries.
- #
- # Call this function from the postinst script of a package that places a
- # shared library in /usr/X11R6/lib, before invoking ldconfig.
-
- local dir ldsoconf
-
- dir="/usr/X11R6/lib"
- ldsoconf="/etc/ld.so.conf"
-
- # is the line not already present?
- if ! fgrep -qsx "$dir" "$ldsoconf"; then
- observe "adding $dir directory to $ldsoconf"
- echo "$dir" >> "$ldsoconf"
- fi
-}
-
-deregister_x_lib_dir_with_ld_so () {
- # syntax: deregister_x_lib_dir_with_ld_so
- #
- # Configure dynamic loader ld.so to not search /usr/X11R6/lib for shared
- # libraries, if and only if no shared libaries remain there.
- #
- # Call this function from the postrm script of a package that places a shared
- # library in /usr/X11R6/lib, in the event "$1" is "remove", and before
- # invoking ldconfig.
-
- local dir ldsoconf fgrep_status cmp_status
-
- dir="/usr/X11R6/lib"
- ldsoconf="/etc/ld.so.conf"
-
- # is the line present?
- if fgrep -qsx "$dir" "$ldsoconf"; then
- # are there any shared objects in the directory?
- if [ "$(echo "$dir"/lib*.so.*.*)" = "$dir/lib*.so.*.*" ]; then
- # glob expansion produced nothing, so no shared libraries are present
- observe "removing $dir directory from $ldsoconf"
- # rewrite the file (very carefully)
- set +e
- fgrep -svx "$dir" "$ldsoconf" > "$ldsoconf.dpkg-tmp"
- fgrep_status=$?
- set -e
- case $fgrep_status in
- 0|1) ;; # we don't actually care if any lines matched or not
- *) die "error reading \"$ldsoconf\"; fgrep exited with status" \
- "$fgrep_status" ;;
- esac
- set +e
- cmp -s "$ldsoconf.dpkg-tmp" "$ldsoconf"
- cmp_status=$?
- set -e
- case $cmp_status in
- 0) rm "$ldsoconf.dpkg-tmp" ;; # files are identical
- 1) mv "$ldsoconf.dpkg-tmp" "$ldsoconf" ;; # files differ
- *) die "error comparing \"$ldsoconf.dpkg-tmp\" to \"$ldsoconf\";" \
- "cmp exited with status $cmp_status" ;;
- esac
- fi
- fi
-}
-
make_symlink_sane () {
# syntax: make_symlink_sane symlink target
#
commit 84b7d5bf7a57cab80ba3696ce95028c2f67ba76d
Author: Julien Cristau <jcris...@debian.org>
Date: Sun Feb 1 01:31:31 2009 +0100
xsfbs: add a repack script for uscan
This will automatically prune upstream tarballs
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
new file mode 100644
index 0000000..5935cc9
--- /dev/null
+++ b/debian/xsfbs/repack.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+set -e
+
+if ! [ -d debian/prune ]; then
+ exit 0
+fi
+
+if [ "x$1" != x--upstream-version ]; then
+ exit 1
+fi
+
+version="$2"
+filename="$3"
+
+if [ -z "$version" ] || ! [ -f "$filename" ]; then
+ exit 1
+fi
+
+dir="$(pwd)"
+tempdir="$(mktemp -d)"
+
+cd "$tempdir"
+tar xf "$dir/$filename"
+cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
+
+tar czf "$dir/$filename" *
+cd "$dir"
+rm -rf "$tempdir"
+echo "Done pruning upstream tarball"
+
+exit 0
commit 86e7669f5d912824e341ea487a6257ec5433eb90
Author: Julien Cristau <jcris...@debian.org>
Date: Thu Jul 17 15:44:45 2008 +0200
xsfbs.mk: make 'log' a separate target
'prepare' runs genscripts, and we don't want that in unpatch,
so create stampdir/log in a separate target, and make unpatch
depend on that instead of prepare.
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index 984e81c..f0f8953 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -110,10 +110,15 @@ $(STAMP_DIR)/stampdir:
.PHONY: prepare
stampdir_targets+=prepare
prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir $(STAMP_DIR)/genscripts
- mkdir -p $(STAMP_DIR)/log
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts
>$@
+.PHONY: log
+stampdir_targets+=log
+log: $(STAMP_DIR)/log
+$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir
+ mkdir -p $(STAMP_DIR)/log
+
# Apply all patches to the upstream source.
.PHONY: patch
stampdir_targets+=patch
@@ -140,7 +145,7 @@ $(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
# Revert all patches to the upstream source.
.PHONY: unpatch
-unpatch: $(STAMP_DIR)/prepare
+unpatch: $(STAMP_DIR)/log
rm -f $(STAMP_DIR)/patch
@echo -n "Unapplying patches..."; \
if $(QUILT) applied >/dev/null 2>/dev/null; then \
commit 50619e730fcaf422ffa4451468520526b2a830b8
Author: Julien Cristau <jcris...@debian.org>
Date: Wed Jul 16 18:42:14 2008 +0200
xsfbs.mk: update the list of releases, and drop some unused code
we haven't had a separate source tree since modularization.
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index 2350f80..984e81c 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -44,9 +44,9 @@ NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed
's/^.://')
BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$logn...@$$(cat
/etc/mailname 2>/dev/null))}})
# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the strings "woody" or "sarge" in the Debian part of the
+# digits, dots, and/or the codename of a release in the Debian part of the
# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo
$${VERSION\#\#*-} | sed 's/\(woody\|sarge\)//g')" : ".*[^0-9.].*" >/dev/null
2>&1; then echo yes; fi)
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo
$${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*"
>/dev/null 2>&1; then echo yes; fi)
# Set up parameters for the Debian build environment.
@@ -69,16 +69,6 @@ endif
# $(STAMP_DIR) houses stamp files for complex targets.
STAMP_DIR:=stampdir
-# $(SOURCE_DIR) houses one or more source trees.
-SOURCE_DIR:=build-tree
-
-# $(SOURCE_TREE) is the location of the source tree to be compiled. If there
-# is more than one, others are found using this name plus a suffix to indicate
-# the purpose of the additional tree (e.g., $(SOURCE_TREE)-custom). The
-# "setup" target is responsible for creating such trees.
-#SOURCE_TREE:=$(SOURCE_DIR)/xc
-#FIXME We need to define this in our debian/rules file
-
# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
# their files.
DEBTREEDIR:=$(CURDIR)/debian/tmp
commit 6c29758eb1a2798f6b77516b7a75dc399769d217
Author: Julien Cristau <jcris...@debian.org>
Date: Wed Jul 16 18:22:01 2008 +0200
xsfbs.mk: more parallel make fixing
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index fa2431e..2350f80 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -119,8 +119,8 @@ $(STAMP_DIR)/stampdir:
# Set up the package build directory as quilt expects to find it.
.PHONY: prepare
stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir
+prepare: $(STAMP_DIR)/prepare
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir $(STAMP_DIR)/genscripts
mkdir -p $(STAMP_DIR)/log
>$@
commit 78b3958b14a5298165d8500d711342be1b7b6463
Author: Julien Cristau <jcris...@debian.org>
Date: Wed Jul 16 18:22:01 2008 +0200
xsfbs.mk: fix the prepare target for parallel make
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index b871b3b..fa2431e 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -119,11 +119,9 @@ $(STAMP_DIR)/stampdir:
# Set up the package build directory as quilt expects to find it.
.PHONY: prepare
stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/log
+prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare
$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir
- if [ ! -e $(STAMP_DIR)/log ]; then \
- mkdir $(STAMP_DIR)/log; \
- fi; \
+ mkdir -p $(STAMP_DIR)/log
>$@
# Apply all patches to the upstream source.
commit 4c2fb5aa80a15b5a9a9b51b03c7dc30496a22561
Author: Brice Goglin <bgog...@debian.org>
Date: Sat May 31 13:23:24 2008 +0200
Update xsfbs/quilt patching rules to be compatible with the
"3.0 (quilt)" source package.
Thanks to Raphael Hertzog.
See http://lists.debian.org/debian-x/2008/05/msg01250.html for details.
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index c11923f..b871b3b 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -21,10 +21,8 @@
# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
export DH_OPTIONS
-# force quilt to not use ~/.quiltrc
-QUILT = quilt --quiltrc /dev/null
-# force QUILT_PATCHES to the default in case it is exported in the environment
-QUILT_PATCHES = patches/
+# force quilt to not use ~/.quiltrc and to use debian/patches
+QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
# Set up parameters for the upstream build environment.
@@ -121,19 +119,11 @@ $(STAMP_DIR)/stampdir:
# Set up the package build directory as quilt expects to find it.
.PHONY: prepare
stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/patches
$(STAMP_DIR)/log
+prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/log
$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir
- if [ ! -e $(STAMP_DIR)/patches ]; then \
- mkdir $(STAMP_DIR)/patches; \
- ln -s $(STAMP_DIR)/patches .pc; \
- echo 2 >$(STAMP_DIR)/patches/.version; \
- fi; \
if [ ! -e $(STAMP_DIR)/log ]; then \
mkdir $(STAMP_DIR)/log; \
fi; \
- if [ -e debian/patches ] && [ ! -e patches ]; then \
- ln -s debian/patches patches; \
- fi; \
>$@
# Apply all patches to the upstream source.
@@ -162,10 +152,10 @@ $(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
# Revert all patches to the upstream source.
.PHONY: unpatch
-unpatch:
+unpatch: $(STAMP_DIR)/prepare
rm -f $(STAMP_DIR)/patch
@echo -n "Unapplying patches..."; \
- if [ -e $(STAMP_DIR)/patches/applied-patches ]; then \
+ if $(QUILT) applied >/dev/null 2>/dev/null; then \
if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
cat $(STAMP_DIR)/log/unpatch; \
echo "successful."; \
@@ -192,7 +182,7 @@ cleanscripts:
.PHONY: xsfclean
xsfclean: cleanscripts unpatch
dh_testdir
- rm -rf .pc patches
+ rm -rf .pc
rm -rf $(STAMP_DIR) $(SOURCE_DIR)
rm -rf imports
dh_clean debian/shlibs.local \
commit dcf4204d5328834172df80951a18de014b0f74ef
Author: Julien Cristau <jcris...@debian.org>
Date: Fri May 30 12:26:18 2008 +0200
xsfbs.sh: use 'local' now that policy allows it
Policy 3.7.3 allows /bin/sh scripts to use 'local'.
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
index 0c7607a..72efa95 100644
--- a/debian/xsfbs/xsfbs.sh
+++ b/debian/xsfbs/xsfbs.sh
@@ -238,19 +238,19 @@ analyze_path () {
# analyze_path /usr/X11R6/bin -> ls -dl /usr /usr/X11R6 /usr/X11R6/bin
# Thanks to Randolph Chung for this clever hack.
- #local f g
+ local f g
while [ -n "$1" ]; do
reject_whitespace "$1"
- _g=
+ g=
message "Analyzing $1:"
- for _f in $(echo "$1" | tr / \ ); do
- if [ -e /$_g$_f ]; then
- ls -dl /$_g$_f /$_g$_f.dpkg-* 2> /dev/null || true
- _g=$_g$_f/
+ for f in $(echo "$1" | tr / \ ); do
+ if [ -e /$g$f ]; then
+ ls -dl /$g$f /$g$f.dpkg-* 2> /dev/null || true
+ g=$g$f/
else
- message "/$_g$_f: nonexistent; directory contents of /$_g:"
- ls -l /$_g
+ message "/$g$f: nonexistent; directory contents of /$g:"
+ ls -l /$g
break
fi
done
@@ -259,27 +259,27 @@ analyze_path () {
}
find_culprits () {
- #local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package
\
- # msg
+ local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package \
+ msg
reject_whitespace "$1"
message "Searching for overlapping packages..."
- _dpkg_info_dir=/var/lib/dpkg/info
- if [ -d $_dpkg_info_dir ]; then
- if [ "$(echo $_dpkg_info_dir/*.list)" != "$_dpkg_info_dir/*.list" ]; then
- _possible_culprits=$(ls -1 $_dpkg_info_dir/*.list | egrep -v \
+ dpkg_info_dir=/var/lib/dpkg/info
+ if [ -d $dpkg_info_dir ]; then
+ if [ "$(echo $dpkg_info_dir/*.list)" != "$dpkg_info_dir/*.list" ]; then
+ possible_culprits=$(ls -1 $dpkg_info_dir/*.list | egrep -v \
"(xbase-clients|x11-common|xfs|xlibs)")
- if [ -n "$_possible_culprits" ]; then
- _smoking_guns=$(grep -l "$1" $_possible_culprits || true)
- if [ -n "$_smoking_guns" ]; then
- _bad_packages=$(printf "\\n")
- for f in $_smoking_guns; do
+ if [ -n "$possible_culprits" ]; then
+ smoking_guns=$(grep -l "$1" $possible_culprits || true)
+ if [ -n "$smoking_guns" ]; then
+ bad_packages=$(printf "\\n")
+ for f in $smoking_guns; do
# too bad you can't nest parameter expansion voodoo
p=${f%*.list} # strip off the trailing ".list"
- _package=${p##*/} # strip off the directories
- _bad_packages=$(printf "%s\n%s" "$_bad_packages" "$_package")
+ package=${p##*/} # strip off the directories
+ bad_packages=$(printf "%s\n%s" "$bad_packages" "$package")
done
- _msg=$(cat <<EOF
+ msg=$(cat <<EOF
The following packages appear to have file overlaps with the X.Org packages;
these packages are either very old, or in violation of Debian Policy. Try
upgrading each of these packages to the latest available version if possible:
@@ -291,17 +291,17 @@ Tracking System. You may want to refer the package
maintainer to section 12.8
of the Debian Policy manual.
EOF
)
- message "$_msg"
- message "The overlapping packages are: $_bad_packages"
+ message "$msg"
+ message "The overlapping packages are: $bad_packages"
else
message "no overlaps found."
fi
fi
else
- message "cannot search; no matches for $_dpkg_info_dir/*.list."
+ message "cannot search; no matches for $dpkg_info_dir/*.list."
fi
else
- message "cannot search; $_dpkg_info_dir does not exist."
+ message "cannot search; $dpkg_info_dir does not exist."
fi
}
@@ -323,7 +323,7 @@ check_symlink () {
#
# Primarily used by check_symlinks_and_warn() and check_symlinks_and_bomb().
- #local symlink
+ local symlink
# validate arguments
if [ $# -ne 1 ]; then
@@ -332,9 +332,9 @@ check_symlink () {
exit $SHELL_LIB_USAGE_ERROR
fi
- _symlink="$1"
+ symlink="$1"
- if [ "$(maplink "$_symlink")" = "$(readlink "$_symlink")" ]; then
+ if [ "$(maplink "$symlink")" = "$(readlink "$symlink")" ]; then
return 0
else
return 1
@@ -349,7 +349,7 @@ check_symlinks_and_warn () {
# Call this function from a preinst script in the event $1 is "upgrade" or
# "install".
- #local errmsg symlink
+ local errmsg symlink
# validate arguments
if [ $# -lt 1 ]; then
@@ -359,25 +359,25 @@ check_symlinks_and_warn () {
fi
while [ -n "$1" ]; do
- _symlink="$1"
- if [ -L "$_symlink" ]; then
- if ! check_symlink "$_symlink"; then
- observe "$_symlink symbolic link points to wrong location" \
- "$(readlink "$_symlink"); removing"
- rm "$_symlink"
+ symlink="$1"
+ if [ -L "$symlink" ]; then
+ if ! check_symlink "$symlink"; then
+ observe "$symlink symbolic link points to wrong location" \
+ "$(readlink "$symlink"); removing"
+ rm "$symlink"
fi
- elif [ -e "$_symlink" ]; then
- _errmsg="$_symlink exists and is not a symbolic link; this package
cannot"
- _errmsg="$_errmsg be installed until this"
- if [ -f "$_symlink" ]; then
- _errmsg="$_errmsg file"
- elif [ -d "$_symlink" ]; then
- _errmsg="$_errmsg directory"
+ elif [ -e "$symlink" ]; then
+ errmsg="$symlink exists and is not a symbolic link; this package cannot"
+ errmsg="$errmsg be installed until this"
+ if [ -f "$symlink" ]; then
+ errmsg="$errmsg file"
+ elif [ -d "$symlink" ]; then
+ errmsg="$errmsg directory"
else
- _errmsg="$_errmsg thing"
+ errmsg="$errmsg thing"
fi
- _errmsg="$_errmsg is removed"
- die "$_errmsg"
+ errmsg="$errmsg is removed"
+ die "$errmsg"
fi
shift
done
@@ -390,7 +390,7 @@ check_symlinks_and_bomb () {
#
# Call this function from a postinst script.
- #local problem symlink
+ local problem symlink
# validate arguments
if [ $# -lt 1 ]; then
@@ -400,24 +400,24 @@ check_symlinks_and_bomb () {
fi
while [ -n "$1" ]; do
- _problem=
- _symlink="$1"
- if [ -L "$_symlink" ]; then
- if ! check_symlink "$_symlink"; then
- _problem=yes
- warn "$_symlink symbolic link points to wrong location" \
- "$(readlink "$_symlink")"
+ problem=
+ symlink="$1"
+ if [ -L "$symlink" ]; then
+ if ! check_symlink "$symlink"; then
+ problem=yes
+ warn "$symlink symbolic link points to wrong location" \
+ "$(readlink "$symlink")"
fi
- elif [ -e "$_symlink" ]; then
- _problem=yes
- warn "$_symlink is not a symbolic link"
+ elif [ -e "$symlink" ]; then
+ problem=yes
+ warn "$symlink is not a symbolic link"
else
- _problem=yes
- warn "$_symlink symbolic link does not exist"
+ problem=yes
+ warn "$symlink symbolic link does not exist"
fi
- if [ -n "$_problem" ]; then
- analyze_path "$_symlink" "$(readlink "$_symlink")"
- find_culprits "$_symlink"
+ if [ -n "$problem" ]; then
+ analyze_path "$symlink" "$(readlink "$symlink")"
+ find_culprits "$symlink"
die "bad symbolic links on system"
fi
shift
@@ -427,9 +427,9 @@ check_symlinks_and_bomb () {
font_update () {
# run $UPDATECMDS in $FONTDIRS
- #local dir cmd shortcmd x_font_dir_prefix
+ local dir cmd shortcmd x_font_dir_prefix
- _x_font_dir_prefix="/usr/share/fonts/X11"
+ x_font_dir_prefix="/usr/share/fonts/X11"
if [ -z "$UPDATECMDS" ]; then
usage_error "font_update() called but \$UPDATECMDS not set"
@@ -441,32 +441,32 @@ font_update () {
reject_unlikely_path_chars "$UPDATECMDS"
reject_unlikely_path_chars "$FONTDIRS"
- for _dir in $FONTDIRS; do
- if [ -d "$_x_font_dir_prefix/$_dir" ]; then
- for _cmd in $UPDATECMDS; do
- if which "$_cmd" > /dev/null 2>&1; then
- _shortcmd=${_cmd##*/}
- observe "running $_shortcmd in $_dir font directory"
- _cmd_opts=
- if [ "$_shortcmd" = "update-fonts-alias" ]; then
- _cmd_opts=--x11r7-layout
+ for dir in $FONTDIRS; do
+ if [ -d "$x_font_dir_prefix/$dir" ]; then
+ for cmd in $UPDATECMDS; do
+ if which "$cmd" > /dev/null 2>&1; then
+ shortcmd=${cmd##*/}
+ observe "running $shortcmd in $dir font directory"
+ cmd_opts=
+ if [ "$shortcmd" = "update-fonts-alias" ]; then
+ cmd_opts=--x11r7-layout
fi
- if [ "$_shortcmd" = "update-fonts-dir" ]; then
- _cmd_opts=--x11r7-layout
+ if [ "$shortcmd" = "update-fonts-dir" ]; then
+ cmd_opts=--x11r7-layout
fi
- if [ "$_shortcmd" = "update-fonts-scale" ]; then
- _cmd_opts=--x11r7-layout
+ if [ "$shortcmd" = "update-fonts-scale" ]; then
+ cmd_opts=--x11r7-layout
fi
- $_cmd $_cmd_opts $_dir || warn "$_cmd $_cmd_opts $_dir" \
+ $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
"failed; font directory data may not" \
"be up to date"
else
- warn "$_cmd not found; not updating corresponding $_dir font" \
+ warn "$cmd not found; not updating corresponding $dir font" \
"directory data"
fi
done
else
- warn "$_dir is not a directory; not updating font directory data"
+ warn "$dir is not a directory; not updating font directory data"
fi
done
}
@@ -485,7 +485,7 @@ remove_conffile_prepare () {
# version (or installed over a version removed-but-not-purged) prior to the
# one in which the conffile was obsoleted.
- #local conffile current_checksum
+ local conffile current_checksum
# validate arguments
if [ $# -lt 2 ]; then
@@ -494,19 +494,19 @@ remove_conffile_prepare () {
exit $SHELL_LIB_USAGE_ERROR
fi
- _conffile="$1"
+ conffile="$1"
shift
- # does the _conffile even exist?
- if [ -e "$_conffile" ]; then
+ # does the conffile even exist?
+ if [ -e "$conffile" ]; then
# calculate its checksum
- _current_checksum=$(md5sum < "$_conffile" | sed 's/[[:space:]].*//')
+ current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
# compare it to each supplied checksum
while [ -n "$1" ]; do
- if [ "$_current_checksum" = "$1" ]; then
+ if [ "$current_checksum" = "$1" ]; then
# we found a match; move the confffile and stop looking
- observe "preparing obsolete conffile $_conffile for removal"
- mv "$_conffile" "$_conffile.$THIS_PACKAGE-tmp"
+ observe "preparing obsolete conffile $conffile for removal"
+ mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
break
fi
shift
@@ -553,7 +553,7 @@ remove_conffile_commit () {
# Call this function from a postinst script after having used
# remove_conffile_prepare() in the preinst.
- #local conffile
+ local conffile
# validate arguments
if [ $# -ne 1 ]; then
@@ -562,12 +562,12 @@ remove_conffile_commit () {
exit $SHELL_LIB_USAGE_ERROR
fi
- _conffile="$1"
+ conffile="$1"
# if the temporary file created by remove_conffile_prepare() exists, remove
it
- if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
- observe "committing removal of obsolete conffile $_conffile"
- rm "$_conffile.$THIS_PACKAGE-tmp"
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "committing removal of obsolete conffile $conffile"
+ rm "$conffile.$THIS_PACKAGE-tmp"
fi
}
@@ -580,7 +580,7 @@ remove_conffile_rollback () {
# or "abort-install" is after having used remove_conffile_prepare() in the
# preinst.
- #local conffile
+ local conffile
# validate arguments
if [ $# -ne 1 ]; then
@@ -589,13 +589,13 @@ remove_conffile_rollback () {
exit $SHELL_LIB_USAGE_ERROR
fi
- _conffile="$1"
+ conffile="$1"
# if the temporary file created by remove_conffile_prepare() exists, move it
# back
- if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
- observe "rolling back removal of obsolete conffile $_conffile"
- mv "$_conffile.$THIS_PACKAGE-tmp" "$_conffile"
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "rolling back removal of obsolete conffile $conffile"
+ mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
fi
}
@@ -615,7 +615,7 @@ replace_conffile_with_symlink_prepare () {
# version (or installed over a version removed-but-not-purged) prior to the
# one in which the conffile was obsoleted.
- #local conffile current_checksum
+ local conffile current_checksum
# validate arguments
if [ $# -lt 3 ]; then
@@ -624,16 +624,16 @@ replace_conffile_with_symlink_prepare () {
exit $SHELL_LIB_USAGE_ERROR
fi
- _oldconffile="$1"
+ oldconffile="$1"
shift
- _newconffile="$1"
+ newconffile="$1"
shift
remove_conffile_prepare "$_oldconffile" "$@"
- # If $_oldconffile still exists, then md5sums didn't match.
+ # If $oldconffile still exists, then md5sums didn't match.
# Copy it to new one.
- if [ -f "$_oldconffile" ]; then
- cp "$_oldconffile" "$_newconffile"
+ if [ -f "$oldconffile" ]; then
+ cp "$oldconffile" "$newconffile"
fi
}
@@ -647,7 +647,7 @@ replace_conffile_with_symlink_commit () {
# Call this function from a postinst script after having used
# replace_conffile_with_symlink_prepare() in the preinst.
- #local conffile
+ local conffile
# validate arguments
if [ $# -ne 1 ]; then
@@ -656,9 +656,9 @@ replace_conffile_with_symlink_commit () {
exit $SHELL_LIB_USAGE_ERROR
fi
- _conffile="$1"
+ conffile="$1"
- remove_conffile_commit "$_conffile"
+ remove_conffile_commit "$conffile"
}
replace_conffile_with_symlink_rollback () {
@@ -674,7 +674,7 @@ replace_conffile_with_symlink_rollback () {
# You should have used replace_conffile_with_symlink_prepare() in the
# preinst.
- #local conffile
+ local conffile
# validate arguments
if [ $# -ne 2 ]; then
@@ -683,12 +683,12 @@ replace_conffile_with_symlink_rollback () {
exit $SHELL_LIB_USAGE_ERROR
fi
- _oldconffile="$1"
- _newconffile="$2"
+ oldconffile="$1"
+ newconffile="$2"
remove_conffile_rollback "$_oldconffile"
- if [ -f "$_newconffile" ]; then
- rm "$_newconffile"
+ if [ -f "$newconffile" ]; then
+ rm "$newconffile"
fi
}
@@ -703,7 +703,7 @@ run () {
# those cases the return value of the debconf command *must* be checked
# before the string returned by debconf is used for anything.
- #local retval
+ local retval
# validate arguments
if [ $# -lt 1 ]; then
@@ -712,10 +712,10 @@ run () {
exit $SHELL_LIB_USAGE_ERROR
fi
- "$@" || _retval=$?
+ "$@" || retval=$?
- if [ ${_retval:-0} -ne 0 ]; then
- observe "command \"$*\" exited with status $_retval"
+ if [ ${retval:-0} -ne 0 ]; then
+ observe "command \"$*\" exited with status $retval"
fi
}
@@ -728,15 +728,15 @@ register_x_lib_dir_with_ld_so () {
# Call this function from the postinst script of a package that places a
# shared library in /usr/X11R6/lib, before invoking ldconfig.
- #local dir ldsoconf
+ local dir ldsoconf
- _dir="/usr/X11R6/lib"
- _ldsoconf="/etc/ld.so.conf"
+ dir="/usr/X11R6/lib"
+ ldsoconf="/etc/ld.so.conf"
# is the line not already present?
- if ! fgrep -qsx "$_dir" "$_ldsoconf"; then
- observe "adding $_dir directory to $_ldsoconf"
- echo "$_dir" >> "$_ldsoconf"
+ if ! fgrep -qsx "$dir" "$ldsoconf"; then
+ observe "adding $dir directory to $ldsoconf"
+ echo "$dir" >> "$ldsoconf"
fi
}
@@ -750,36 +750,36 @@ deregister_x_lib_dir_with_ld_so () {
# library in /usr/X11R6/lib, in the event "$1" is "remove", and before
# invoking ldconfig.
- #local dir ldsoconf fgrep_status cmp_status
+ local dir ldsoconf fgrep_status cmp_status
- _dir="/usr/X11R6/lib"
- _ldsoconf="/etc/ld.so.conf"
+ dir="/usr/X11R6/lib"
+ ldsoconf="/etc/ld.so.conf"
# is the line present?
- if fgrep -qsx "$_dir" "$_ldsoconf"; then
+ if fgrep -qsx "$dir" "$ldsoconf"; then
# are there any shared objects in the directory?
- if [ "$(echo "$_dir"/lib*.so.*.*)" = "$_dir/lib*.so.*.*" ]; then
+ if [ "$(echo "$dir"/lib*.so.*.*)" = "$dir/lib*.so.*.*" ]; then
# glob expansion produced nothing, so no shared libraries are present
- observe "removing $_dir directory from $_ldsoconf"
+ observe "removing $dir directory from $ldsoconf"
# rewrite the file (very carefully)
set +e
- fgrep -svx "$_dir" "$_ldsoconf" > "$_ldsoconf.dpkg-tmp"
- _fgrep_status=$?
+ fgrep -svx "$dir" "$ldsoconf" > "$ldsoconf.dpkg-tmp"
+ fgrep_status=$?
set -e
- case $_fgrep_status in
+ case $fgrep_status in
0|1) ;; # we don't actually care if any lines matched or not
- *) die "error reading \"$_ldsoconf\"; fgrep exited with status" \
- "$_fgrep_status" ;;
+ *) die "error reading \"$ldsoconf\"; fgrep exited with status" \
+ "$fgrep_status" ;;
esac
set +e
- cmp -s "$_ldsoconf.dpkg-tmp" "$_ldsoconf"
- _cmp_status=$?
+ cmp -s "$ldsoconf.dpkg-tmp" "$ldsoconf"
+ cmp_status=$?
set -e
- case $_cmp_status in
- 0) rm "$_ldsoconf.dpkg-tmp" ;; # files are identical
- 1) mv "$_ldsoconf.dpkg-tmp" "$_ldsoconf" ;; # files differ
- *) die "error comparing \"$_ldsoconf.dpkg-tmp\" to \"$_ldsoconf\";" \
- "cmp exited with status $_cmp_status" ;;
+ case $cmp_status in
+ 0) rm "$ldsoconf.dpkg-tmp" ;; # files are identical
+ 1) mv "$ldsoconf.dpkg-tmp" "$ldsoconf" ;; # files differ
+ *) die "error comparing \"$ldsoconf.dpkg-tmp\" to \"$ldsoconf\";" \
+ "cmp exited with status $cmp_status" ;;
esac
fi
fi
@@ -811,17 +811,17 @@ make_symlink_sane () {
# We could just use the positional parameters as-is, but that makes things
# harder to follow.
- #local symlink target
+ local symlink target
- _symlink="$1"
- _target="$2"
+ symlink="$1"
+ target="$2"
- if [ -L "$_symlink" ] && [ "$(readlink "$_symlink")" = "$_target" ]; then
- observe "link from $_symlink to $_target already exists"
+ if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then
+ observe "link from $symlink to $target already exists"
else
- observe "creating symbolic link from $_symlink to $_target"
- mkdir -p "${_target%/*}" "${_symlink%/*}"
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
