-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Brice Goglin wrote: > Jelle de Jong wrote: >> I am typing this report from tty0 since my xorg is not working with my >> intel chipset on my eeepc 901. The screen startup in 800x600 >> > > Do you actually have a VGA monitor plugged _and_ the internal panel > enabled? Or are you only using the internal panel? > > By the way, I uploaded intel 2.6.0 to experimental today. > > Brice >
Hi Brice, I did some more testing, that took far more hours than I liked. I am now using 2:2.6.0-1 I cleaned up my Debian system and downgraded all my experimental packages back to unstable. After this I installed the xorg drivers from experimental and did some more testing. Yesterday I reported that the mouse and keyboard where not working, and that this was a pebkac, guess what, its not! The xserver-xorg-input-all had some issues... please see the attachments. The 800x600 resolution bug is also definitely there. I got a samsung syncmaster 940BW connected to my VGA port of my EeePC 901 laptop that also has LVDS. Normaly the VGA output gets initialized on the 1440x900 resolutions and I use a xrandr command to disable the LVDS output. Currently the vga output is 800x600 and the LVDS output is black but, not off! The backlight is still on. So neither the VGA or LVDS is correctly initialized with the new drivers. It gets more interesting: xrandr --output VGA --auto --output LVDS --off This works correctly and setup my 1440x900 vga only setup. xrandr --output LVDS --auto --output VGA --off This works correctly and setup my 1024x600 lvds only setup. xrandr --output VGA --mode 1280x768 --rate 60 --output LVDS --off This does not work anymore :-( I used this command to setup my beamer. The resolution is not in the xrandr -q output anymore. I can live with this issue, I will fix a workaround, hints are appreciated. Can you forwarding this report to somebody that can fix it? Thanks in advance, Best regards, Jelle de Jong -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAklwkcIACgkQ1WclBW9j5HkV1wP/aN652dmYh2WUzMeJ1bvqeh0V RKE+p6Z69kd7UP6vlwbbKFkTyd8lvdpJkLHkcAjtkDRroOclvNzB35i8Lh/m9Mhi Z6poeo2Cm8pmVsFQtiQQsRYglK8uBjgmfbdOtE40Yy+hkvFpKwNGslBW8veGLWw9 483nle9uQp1CFpvbJjY= =xQIm -----END PGP SIGNATURE-----
------------------------------------------------------------------------ sudo aptitude install -t experimental xserver-xorg-video-intel Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done The following packages are BROKEN: xserver-xorg-input-all The following NEW packages will be installed: libdrm-intel1{a} libdrm2{a} x11-xkb-utils{a} xserver-common{a} xserver-xorg{a} xserver-xorg-core{a} xserver-xorg-video-intel The following packages will be REMOVED: iso-codes{u} libcamel1.2-11{u} libedataserver1.2-9{u} liblircclient0{u} libmodplug0c2{u} libopenal1{u} libtotem-plparser10{u} libxcb-shape0{u} libxcb-shm0{u} libxcb-xv0{u} libxine1-misc-plugins{u} libxine1-plugins{u} libxtrap6{u} libxxf86dga1{u} libxxf86misc1{u} libxxf86vm1{u} mplayer-skin-blue{u} totem-common{u} The following packages are RECOMMENDED but will NOT be installed: libgl1-mesa-dri 0 packages upgraded, 8 newly installed, 18 to remove and 208 not upgraded. Need to get 583kB/3534kB of archives. After unpacking 14.5MB will be freed. The following packages have unmet dependencies: xserver-xorg-input-all: Depends: xserver-xorg-input-evdev but it is not installable Depends: xserver-xorg-input-kbd but it is not installable Depends: xserver-xorg-input-mouse but it is not installable Depends: xserver-xorg-input-synaptics but it is not installable Depends: xserver-xorg-input-wacom but it is not installable The following actions will resolve these dependencies: Install the following packages: xserver-xorg-input-synaptics [0.15.0+git20080820-1 (experimental)] Keep the following packages at their current version: xserver-xorg-input-all [Not Installed] Score is 50 Accept this solution? [Y/n/q/?] ------------------------------------------------------------------------ rmadison xserver-xorg-video-intel rmadison x11-xserver-utils ------------------------------------------------------------------------ sudo aptitude install -t experimental xserver-xorg-video-intel sudo aptitude install -t experimental xfonts-cyrillic xfonts-scalable xfonts-100dpi xfonts-75dpi xfonts-base sudo aptitude install -t experimental xauth x11-xserver-utils sudo aptitude install -t experimental xserver-xorg-input-kbd xserver-xorg-input-mouse xserver-xorg-input-evdev xserver-xorg-input-synaptics apt-show-versions | fgrep /experimental libdrm-intel1/experimental uptodate 2.4.3+git+20090105+a8c5480-1 libdrm2/experimental uptodate 2.4.3+git+20090105+a8c5480-1 libx11-6/experimental uptodate 2:1.1.99.2-1 libxcb1/experimental uptodate 1.1.92-0.1 xserver-common/experimental uptodate 2:1.5.3-1 xserver-xorg/experimental uptodate 1:7.4~4 xserver-xorg-core/experimental uptodate 2:1.5.3-1 xserver-xorg-input-evdev/experimental uptodate 1:2.1.0-1 xserver-xorg-input-kbd/experimental uptodate 1:1.3.1-2 xserver-xorg-input-mouse/experimental uptodate 1:1.3.0-2 xserver-xorg-input-synaptics/experimental uptodate 0.15.0+git20080820-1 xserver-xorg-video-intel/experimental uptodate 2:2.6.0-1 ------------------------------------------------------------------------
X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-1-686 i686 Debian Current Operating System: Linux debian-eeepc 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 Build Date: 11 November 2008 11:19:34PM xorg-server 2:1.5.3-1 (jcris...@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 16 14:18:59 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (**) Option "BlankTime" "0" (**) Option "StandbyTime" "0" (**) Option "SuspendTime" "0" (**) Option "OffTime" "0" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x81d12e0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (--) using VT number 3 (--) PCI:*(0...@0:2:0) Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7f00000/0, 0xd0000000/0, 0xf7ec0000/0, I/O @ 0x0000dc80/0 (--) PCI: (0...@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7f80000/0 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) "glx" will not be loaded unless you've specified it to be loaded elsewhere. (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere. (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded even though the default is to disable it. (II) "freetype" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded even though the default is to disable it. (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.3, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers (II) Matched intel from file name intel.ids (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.3, module version = 2.6.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 0...@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.3, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME (--) intel(0): Chipset: "945GME" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xF7F00000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "AUO", prod id 4128 (II) intel(0): found backlight control method /sys/class/backlight/eeepc (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 549 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1440x900"x75.0 136.49 1440 1536 1688 1936 900 901 904 940 -hsync +vsync (70.5 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) (II) intel(0): EDID vendor "SAM", prod id 549 (II) intel(0): EDID vendor "AUO", prod id 4128 (II) intel(0): Output VGA connected (II) intel(0): Output LVDS connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA using initial mode 800x600 (II) intel(0): Output LVDS using initial mode 800x600 (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 7932 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (++) intel(0): DPI set to (133, 133) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.3, module version = 2.4.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 238848 total, 1 used (II) intel(0): I830CheckAvailableMemory: 955388 kB available (EE) intel(0): [dri] I830CheckDRIAvailable failed: glx not loaded (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 39321600 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical ) (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical ) (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical ) (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB) (II) intel(0): 0x00633000-0x00732fff: fake bufmgr (1024 kB) (II) intel(0): 0x00733000-0x00733fff: overlay registers (4 kB, 0x000000003ff33000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x01000000-0x01ffffff: front buffer (12800 kB) X tiled (II) intel(0): 0x02000000-0x0457ffff: exa offscreen (38400 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane B is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Failed (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) intel(0): Setting screen physical size to 152 x 114 (II) config/hal: Adding input device Video Bus (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.3, module version = 2.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event6" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) Video Bus: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse (**) ImPS/2 Logitech Wheel Mouse: always reports core events (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event2" (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5 (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE) (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) AT Translated Set 2 keyboard: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Dell BT Keyboard (**) Dell BT Keyboard: always reports core events (**) Dell BT Keyboard: Device: "/dev/input/event7" (II) Dell BT Keyboard: Found 1 mouse buttons (II) Dell BT Keyboard: Found keys (II) Dell BT Keyboard: Configuring as keyboard (**) Dell BT Keyboard: YAxisMapping: buttons 4 and 5 (**) Dell BT Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Dell BT Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Dell BT Keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) Dell BT Keyboard: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) Dell BT Keyboard: xkb_layout: "us" (II) config/hal: Adding input device Trust Mouse 15606 (**) Trust Mouse 15606: always reports core events (**) Trust Mouse 15606: Device: "/dev/input/event8" (II) Trust Mouse 15606: Found 5 mouse buttons (II) Trust Mouse 15606: Found x and y relative axes (II) Trust Mouse 15606: Configuring as mouse (**) Trust Mouse 15606: YAxisMapping: buttons 4 and 5 (**) Trust Mouse 15606: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Trust Mouse 15606" (type: MOUSE)
$ xrandr --version Server reports RandR version 1.2 $ xrandr -q Screen 0: minimum 320 x 200, current 1440 x 900, maximum 1600 x 1600 VGA connected 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 257mm 1440x900 59.9*+ 75.0 59.9* 60.0 1600x1024 60.2 1400x1050 60.0 1280x1024 75.0 60.0 60.0 1280x960 60.0 60.0 1360x768 59.8 1152x864 75.0 75.0 75.0 70.0 60.0 1024x768 75.1 75.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 72.8 75.0 66.7 60.0 59.9 720x400 70.1 LVDS connected (normal left inverted right x axis y axis) 1024x600 60.0 + 800x600 85.1 72.2 75.0 60.3 56.2 640x480 85.0 72.8 75.0 59.9 720x400 85.0 640x400 85.1 640x350 85.1 $ xrandr --output VGA --mode 1280x768 --rate 60 --output LVDS --off xrandr: cannot find mode 1280x768 # ^ this used to work! with previous version of drivers $ xrandr --output VGA --mode 1360x768 --rate 60 --output LVDS --off