Andrea Vettorello wrote: >> The last two days, without GDB, again it worked with no issues, so the >> glitch, hardware or software, seems disappeared. >> > > I spoken too early. Well, this time I was able to get a backtrace, > don't know if useful: > > Program received signal SIGINT, Interrupt. > 0xb7f0b424 in __kernel_vsyscall () > #0 0xb7f0b424 in __kernel_vsyscall () > #1 0xb7d77ed9 in ioctl () from /lib/i686/cmov/libc.so.6 > #2 0xb7aff23d in drmDMA () from /usr/lib/libdrm.so.2 > #3 0xb7a87f79 in RADEONCPGetBuffer (pScrn=0x9dcd8a0) > at ../../src/radeon_accel.c:611 > #4 0xb7a88113 in RADEONCPFlushIndirect (pScrn=0x9dcd8a0, discard=1) > at ../../src/radeon_accel.c:665 > #5 0xb7a929e3 in RADEONCPScanlinePacket (pScrn=0x9dcd8a0, bufno=0) > at ../../src/radeon_accelfuncs.c:686 > #6 0xb7890878 in XAAWritePixmapScanline (pScrn=0x9dcd8a0, x=343, y=146, > w=912, h=173, src=0xa5ded320 "<FF><FF><FF>", srcwidth=3648, rop=3, > planemask=4294967295, trans=-1, bpp=32, depth=24) > at ../../../../hw/xfree86/xaa/xaaImage.c:370 > #7 0xb7882448 in XAADoImageWrite (pSrc=0xa5bcd008, pDst=0xa10f230, > pGC=0xa10c2a0, prgnDst=0xbfe26150, pptSrc=0xbfe260f0) > at ../../../../hw/xfree86/xaa/xaaCpyArea.c:218 > #8 0xb7881bf2 in XAABitBlt (pSrcDrawable=0xa5bcd008, pDstDrawable=0xa10f230, > pGC=0xa10c2a0, srcx=0, srcy=0, width=912, height=785, dstx=7, dsty=3, > doBitBlt=0xb7882330 <XAADoImageWrite>, bitPlane=0) > at ../../../../hw/xfree86/xaa/xaaBitBlt.c:203 > #9 0xb7882a3f in XAACopyArea (pSrcDrawable=0xa5bcd008, > pDstDrawable=0xa10f230, pGC=0xa10c2a0, srcx=0, srcy=0, width=912, > height=785, dstx=7, dsty=3) at ../../../../hw/xfree86/xaa/xaaCpyArea.c:66 > #10 0xb78c449a in cwCopyArea (pSrc=0xa5bcd008, pDst=0xa10f230, pGC=0xa10c2a0, > srcx=0, srcy=0, w=912, h=785, dstx=7, dsty=3) > at ../../../miext/cw/cw_ops.c:201 > #11 0x08177a26 in damageCopyArea (pSrc=0xa5bcd008, pDst=0xa10f230, > pGC=0xa10c2a0, srcx=0, srcy=0, width=912, height=785, dstx=7, dsty=3) > at ../../../miext/damage/damage.c:834 > #12 0x0808be86 in ProcCopyArea (client=0xa07bec0) at ../../dix/dispatch.c:1802 > #13 0x08155004 in XaceCatchDispatchProc (client=0xa07bec0) > at ../../Xext/xace.c:281 > #14 0x0808de64 in Dispatch () at ../../dix/dispatch.c:502 > #15 0x08074795 in main (argc=9, argv=0xbfe26844, envp= > Cannot access memory at address 0xc0286431 > ) at ../../dix/main.c:452 >
Did you check that Xorg was actually stuck in there ? You should interrupt the process and get the backtrace, then hit 'c' to make the process continue, interrupt again, ... several times and compare the backtraces. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
