On Sat, Jul 26, 2008 at 5:21 AM, Tobias Diedrich <[EMAIL PROTECTED]> wrote: > Package: xserver-xorg-video-ati > Version: 1:6.9.0-1+lenny1 > Severity: normal > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Setup: > Dual-head with single card (Radeon X300), two TFTs with different native > resolution (SyncMaster 215TW 1680x1050 and Flatron L2010P 1600x1200). > > Tuesday my harddrive died and I had to restore from backup (march). > Normally I don't safe-upgrade/dist-upgrade as often as I probably > should, so I'm not sure which exact version of xorg I had prior to the > harddrive failure, but it should have been a version somewhere between > the march version and the current version I guess. :) > > After restoring from backup and safe-upgrade/dist-upgrade, my dual-head > setup is broken: > > When I now start X, the SyncMaster 215TW (1680x1050 native resolution) is > configured with 1600x1200 instead. Previously this was correctly > configured to 1680x1050. > > However this only happens if both monitors are connected. > With just the SyncMaster 215TW attached it is correctly configured for > 1680x1050. > > Running "xrandr --output DVI-1 --auto" later will fix this and change > the output to the native panel resolution. >
This is probably due to a change in default xrandr mode selection policy in the two xserver versions you are using. > (However fluxbox still thinks the desktop is 1600x1200, for example when > maximizing windows, but I suspect this is a fluxbox bug?) > Since you are using a clone mode, fluxbox is getting it's geometry from the 1600x1200 screen. > As you can see, two DVI-ports are detected even though only one is > really present on the card. > > The SyncMaster is connected to the DVI port and the Flatron is connected > to the VGA port. The S-Video port is present, but unused. Please send me your video bios and the pci subsystem ids for your video card, and I'll fix this issue. subsystem ids: lspci -nv video bios (as root), use lspci to get the pci slot id: cd /sys/bus/pci/devices/<pci slot id>/ echo 1 > rom cat rom > /tmp/videocard.rom echo 0 > rom Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
