debian/changelog | 9 ++
debian/control | 12 +--
debian/xsfbs/xsfbs-autoreconf.mk | 150 ---------------------------------------
debian/xsfbs/xsfbs.mk | 80 --------------------
debian/xsfbs/xsfbs.sh | 7 -
5 files changed, 16 insertions(+), 242 deletions(-)
New commits:
commit 63864bf72b8dfd13d7899caa3653d8bfc9316687
Author: Julien Cristau <[EMAIL PROTECTED]>
Date: Sun May 18 21:21:48 2008 +0200
debian/control updates
* Drop -1 debian revisions from build-deps.
* Bump Standards-Version to 3.7.3.
* Drop the XS- prefix from Vcs-* control fields.
* libxi6{,-dbg} don't need to depend on x11-common.
diff --git a/debian/changelog b/debian/changelog
index 1e9a95b..b028394 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,12 @@
+libxi (2:1.1.3-2) UNRELEASED; urgency=low
+
+ * Drop -1 debian revisions from build-deps.
+ * Bump Standards-Version to 3.7.3.
+ * Drop the XS- prefix from Vcs-* control fields.
+ * libxi6{,-dbg} don't need to depend on x11-common.
+
+ -- Julien Cristau <[EMAIL PROTECTED]> Sun, 18 May 2008 21:20:16 +0200
+
libxi (2:1.1.3-1) unstable; urgency=low
* Add upstream URL to debian/copyright.
diff --git a/debian/control b/debian/control
index 3c00fa7..0d40cf5 100644
--- a/debian/control
+++ b/debian/control
@@ -3,15 +3,15 @@ Section: x11
Priority: optional
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Uploaders: David Nusinow <[EMAIL PROTECTED]>, Drew Parsons <[EMAIL
PROTECTED]>, Jamey Sharp <[EMAIL PROTECTED]>, Josh Triplett <[EMAIL
PROTECTED]>, Julien Cristau <[EMAIL PROTECTED]>
-Build-Depends: debhelper (>= 5.0.0), libx11-dev (>= 1:0.99.2-1), libxext-dev
(>= 1:0.99.1-1), x11proto-input-dev (>= 1.4), pkg-config, quilt, xutils-dev
-Standards-Version: 3.7.2
-XS-Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxi
-XS-Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxi.git
+Build-Depends: debhelper (>= 5.0.0), libx11-dev (>= 1:0.99.2), libxext-dev (>=
1:0.99.1), x11proto-input-dev (>= 1.4), pkg-config, quilt, xutils-dev
+Standards-Version: 3.7.3
+Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxi
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxi.git
Package: libxi6
Section: libs
Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, x11-common
+Depends: ${shlibs:Depends}, ${misc:Depends}
Description: X11 Input extension library
libXi provides an X Window System client interface to the XINPUT
extension to the X protocol.
@@ -31,7 +31,7 @@ Package: libxi6-dbg
Section: libdevel
Architecture: any
Priority: extra
-Depends: ${shlibs:Depends}, ${misc:Depends}, x11-common, libxi6 (=
${binary:Version})
+Depends: ${shlibs:Depends}, ${misc:Depends}, libxi6 (= ${binary:Version})
Description: X11 Input extension library (debug package)
libXi provides an X Window System client interface to the XINPUT
extension to the X protocol.
commit c87ea43906787791a87a659c0a9d6312945ffb32
Author: Julien Cristau <[EMAIL PROTECTED]>
Date: Sun Apr 13 03:12:18 2008 +0200
Remove xsfbs-autoreconf.mk
It has never been used, and that doesn't look likely to change.
diff --git a/debian/xsfbs/xsfbs-autoreconf.mk b/debian/xsfbs/xsfbs-autoreconf.mk
deleted file mode 100644
index dce8fc8..0000000
--- a/debian/xsfbs/xsfbs-autoreconf.mk
+++ /dev/null
@@ -1,150 +0,0 @@
-#!/usr/bin/make -f
-# $Id$
-
-# Automagical conversion of autoreconf results into quilt patches.
-
-# Copyright 2006 Eugene Konev
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# The idea behind this is storing changes produced by autoreconf as a
-# separate patch on quilt stack (on top of stack actually).
-# The only usable target here is 'autoreconf`. Other targets are not
-# supposed to be called directly. DO NOT invoke them, unless you know what
-# you are doing.
-# The autoreconf target will check if files with names in $(RECONF_CHECKFILES)
-# were changed during patching (from upstream version or from previously
-# autoreconfed version) and call actual autoreconfing if they were.
-# The actual autoreconfing target (doautoreconf) WILL FAIL after
-# calling autoreconf and pushing changes into quilt stack by design. It
-# should never be invoked by automatic build process.
-# The proposed use is adding autoreconf into clean's prerequisites before
-# xsfclean like:
-# - clean: xsfclean
-# + clean: autoreconf xsfclean
-# This will ensure it is called when you build package with dpkg-buildpackage.
-
-# This dir will be used for producing diff of autoreconfed tree
-RECONF_DIR := xsfautoreconf
-
-# This files will be checked for changes
-RECONF_CHECKFILES += configure.ac Makefile.am
-
-# This files will not be hardlinked but copied
-RECONF_NOLINKFILES += aclocal.m4
-
-# This files/dirs will be pruned after autoreconf run
-RECONF_PRUNEFILES += autom4te.cache config.h.in~ aclocal.m4~
-
-# Internal target. Never invoke directly.
-stampdir_target+=check.md5sum
-$(STAMP_DIR)/check.md5sum:
- dh_testdir
- $(MAKE) -f debian/rules prepare
- for F in $(RECONF_CHECKFILES); do \
- find . -wholename ./$(STAMP_DIR) -prune -o -name $$F -print | \
- LC_ALL=C sort | xargs --no-run-if-empty md5sum >>$@; \
- done
-
-# Internal target. Never invoke directly.
-$(STAMP_DIR)/clean.md5sum:
- dh_testdir
- $(MAKE) -f debian/rules unpatch
- rm -f $(STAMP_DIR)/check.md5sum
- $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
- mv $(STAMP_DIR)/check.md5sum $@
-
-# Internal target. Never invoke directly.
-debian/patches/patched.md5sum:
- dh_testdir
- [ -f $(STAMP_DIR)/clean.md5sum ] || \
- $(MAKE) -f debian/rules $(STAMP_DIR)/clean.md5sum
-
- $(MAKE) -f debian/rules patch
- rm -f $(STAMP_DIR)/check.md5sum
- $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
- if ! diff $(STAMP_DIR)/clean.md5sum \
- $(STAMP_DIR)/check.md5sum > /dev/null; then \
- $(MAKE) -f debian/rules doautoreconf; \
- else \
- mv $(STAMP_DIR)/check.md5sum $@; \
- fi
-
-# Internal target. Never invoke directly.
-,PHONY: doautoreconf
-doautoreconf: patch
- quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1 || true
- if quilt applied | grep ^autoreconf.diff$$ > /dev/null; then \
- quilt pop -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- quilt rename -p autoreconf.diff autoreconf-old.diff \
- >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- quilt delete autoreconf-old.diff >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- fi
-
- if [ -e $(RECONF_DIR) ]; then \
- echo "ERROR: $(RECONF_DIR) already exists. Cleanup by hand"; \
- exit 1; \
- fi
-
- mkdir -p $(RECONF_DIR)/before
- find . -maxdepth 1 -mindepth 1 ! -wholename ./$(RECONF_DIR) \
- -a ! -wholename ./debian -a ! -wholename ./patches \
- -a ! -wholename ./.pc -a ! -wholename ./$(STAMP_DIR) | \
- xargs -i{} cp -al {} $(RECONF_DIR)/before/
-
- for F in $(RECONF_PRUNEFILES); do \
- find $(RECONF_DIR)/before -name $$F -print | \
- xargs --no-run-if-empty rm -r; \
- done
-
- cp -al $(RECONF_DIR)/before $(RECONF_DIR)/after
-
- for F in $(RECONF_NOLINKFILES); do \
- find . -wholename ./$(RECONF_DIR) -prune -o -wholename ./debian \
- -prune -o -wholename ./$(STAMP_DIR) -prune -o -name $$F \
- -print | \
- xargs --no-run-if-empty -i{} cp --remove-destination {} \
- $(RECONF_DIR)/after/{}; \
- done
-
- cd $(RECONF_DIR)/after && autoreconf -v --install && \
- for F in $(RECONF_PRUNEFILES); do \
- find . -name $$F -print | \
- xargs --no-run-if-empty rm -r; \
- done
-
- cd $(RECONF_DIR) && diff -Nru before after > autoreconf.diff || true
-
- quilt import $(RECONF_DIR)/autoreconf.diff \
- >>$(STAMP_DIR)/log/autoreconf 2>&1
-
- mv $(STAMP_DIR)/check.md5sum debian/patches/patched.md5sum
-
- rm -r $(RECONF_DIR) && rm -f patches/autoreconf-old.diff
-
- @echo
- @echo "****************************************************************"
- @echo " This target is made to fail INTENTIONALLY. It should NEVER "
- @echo " be invoked during automatic builds. "
- @echo
- @echo " This target was invoked because you added/removed/changed "
- @echo " patches which modify either configure.ac or Makefile.am and, "
- @echo " thus, require autoreconf run. And all autoreconfing should "
- @echo " happen before uploading. "
- @echo
- @echo " (See also debian/xsfbs/xsfbs-autoreconf.mk) "
- @echo
- @echo " If you see this message, autoreconfing actually SUCCEEDED, "
- @echo " and your build should finish successfully, when rerun. "
- @echo "****************************************************************"
- @echo
- exit 1;
-
-.PHONY: autoreconf
-autoreconf: debian/patches/patched.md5sum patch $(STAMP_DIR)/check.md5sum
- if ! diff $(STAMP_DIR)/check.md5sum \
- debian/patches/patched.md5sum > /dev/null; then \
- $(MAKE) -f debian/rules doautoreconf; \
- fi
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index 51fa145..6582a42 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -307,6 +307,4 @@ else
echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >>
debian/$(PACKAGE).substvars
endif
-include debian/xsfbs/xsfbs-autoreconf.mk
-
# vim:set noet ai sts=8 sw=8 tw=0:
commit bef8b301bf7649b4156bef2dc26ebf9f7f9244ad
Author: Julien Cristau <[EMAIL PROTECTED]>
Date: Fri Mar 21 11:53:16 2008 +0100
xsfbs.mk: make 'serverabi' depend on 'install'
See bug#471193, thanks to Bernhard R. Link <[EMAIL PROTECTED]>
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index 4822173..51fa145 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -297,7 +297,7 @@ PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' <
debian/control)
endif
.PHONY: serverabi
-serverabi:
+serverabi: install
ifeq ($(SERVERMINVERS),)
@echo error: xserver-xorg-dev needs to be installed
@exit 1
commit 844199da71f29556be3436fa0fead2f0cc0bfc1b
Author: David Nusinow <[EMAIL PROTECTED]>
Date: Tue Jan 8 20:18:49 2008 -0500
Kill the manifest code.
It served its purpose for the monolith and is now dead.
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index b8f7afd..4822173 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -196,7 +196,6 @@ xsfclean: cleanscripts unpatch
rm -rf $(STAMP_DIR) $(SOURCE_DIR)
rm -rf imports
dh_clean debian/shlibs.local \
- debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new \
debian/po/pothead
# Generate the debconf templates POT file header.
@@ -209,58 +208,6 @@ debian/po/pothead: debian/po/pothead.in
updatepo: debian/po/pothead
debian/scripts/debconf-updatepo --pot-header=pothead --verbose
-# Use the MANIFEST files to determine whether we're shipping everything we
-# expect to ship, and not shipping anything we don't expect to ship.
-.PHONY: check-manifest
-stampdir_targets+=check-manifest
-check-manifest: $(STAMP_DIR)/check-manifest
-$(STAMP_DIR)/check-manifest: $(STAMP_DIR)/install
- # Compare manifests.
- (cd debian/tmp && find -type f | LC_ALL=C sort | cut -c3-) \
- >debian/MANIFEST.$(ARCH).new
- # Construct MANIFEST files from MANIFEST.$(ARCH).in and
- # MANIFEST.$(ARCH).all or MANIFEST.all.
- if expr "$(findstring -DBuildFonts=NO,$(IMAKE_DEFINES))" \
- : "-DBuildFonts=NO" >/dev/null 2>&1; then \
- LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in >debian/MANIFEST.$(ARCH);
\
- else \
- if [ -e debian/MANIFEST.$(ARCH).all ]; then \
- LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in
debian/MANIFEST.$(ARCH).all >debian/MANIFEST.$(ARCH); \
- else \
- LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in debian/MANIFEST.all
>debian/MANIFEST.$(ARCH); \
- fi; \
- fi
- # Confirm that the installed file list has not changed.
- if [ -e debian/MANIFEST.$(ARCH) ]; then \
- if ! cmp -s debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new; then
\
- diff -U 0 debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new ||
DIFFSTATUS=$$?; \
- case $${DIFFSTATUS:-0} in \
- 0) ;; \
- 1) if [ -n "$$IGNORE_MANIFEST_CHANGES" ]; then \
- echo 'MANIFEST check failed; ignoring problem because
\$$IGNORE_MANIFEST_CHANGES set' >&2; \
- echo 'Please ensure that the package maintainer has an
up-to-date version of the' >&2; \
- echo 'MANIFEST.$(ARCH).in file.' >&2; \
- else \
- echo 'MANIFEST check failed; please see debian/README' >&2; \
- exit 1; \
- fi; \
- ;; \
- *) echo "diff reported unexpected exit status $$DIFFSTATUS when
performing MANIFEST check" >&2; \
- exit 1; \
- ;; \
- esac; \
- fi; \
- fi
- >$@
-
-# Because we build (and install) different files depending on whether or not
-# any architecture-independent packages are being created, the list of files we
-# expect to see will differ; see the discussion of the "build" target above.
-.PHONY: check-manifest-arch check-manifest-indep
-check-manifest-arch: IMAKE_DEFINES+= -DBuildSpecsDocs=NO -DBuildFonts=NO
-DInstallHardcopyDocs=NO
-check-manifest-arch: check-manifest
-check-manifest-indep: check-manifest
-
# Remove files from the upstream source tree that we don't need, or which have
# licensing problems. It must be run before creating the .orig.tar.gz.
#
commit 331c032528ba1faebef1d8eaa56db47f533f0426
Author: David Nusinow <[EMAIL PROTECTED]>
Date: Sat Sep 22 23:49:11 2007 -0400
Remove make-orig-tar-gz target
This target wasn't kept up to date and was totally broken for the git
world. The way we use git has made this target pretty well impossible to
use in any form, so it's been supersceded by a script that is currently
located at
http://people.debian.org/~dnusinow/xsf_scripts/git-make-orig-tar-gz
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
index bfca7bb..b8f7afd 100755
--- a/debian/xsfbs/xsfbs.mk
+++ b/debian/xsfbs/xsfbs.mk
@@ -272,29 +272,6 @@ prune-upstream-tree:
dh_testdir
grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-# Change to what should be the correct directory, ensure it is, and if
-# so, create the .orig.tar.gz file. Exclude the debian directory and its
-# contents, and any .svn directories and their contents (so that we can safely
-# build an .orig.tar.gz from SVN checkout, not just an export).
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-#
-# This rule *IS* the recommended method for creating a new .orig.tar.gz file,
-# for the rare situations when one is needed.
-.PHONY: make-orig-tar-gz
-make-orig-tar-gz: clean prune-upstream-tree
- ( cd .. \
- && if [ $(shell basename $(CURDIR)) != $(SOURCE_NAME)-$(NO_EPOCH_VER)
]; then \
- echo "Our current working directory has the wrong name.
Renaming..." >&2; \
- mv $(CURDIR) $(SOURCE_NAME)-$(NO_EPOCH_VER); \
- fi; \
- tar --exclude=debian --exclude=debian/* \
- --exclude=.svn --exclude=.svn/* \
- -cf - $(SOURCE_NAME)-$(NO_EPOCH_VER) \
- | gzip -9 >$(SOURCE_NAME)_$(NO_EPOCH_VER).orig.tar.gz; \
- )
-
# Verify that there are no offsets or fuzz in the patches we apply.
#
# Note: This rule is for Debian package maintainers' convenience, and is not
commit 575efb7249d7cf194f07e45db17e601d9c259231
Author: Brice Goglin <[EMAIL PROTECTED]>
Date: Wed Aug 29 09:36:00 2007 +0200
Do not call laptop-detect, let the only user call it directly
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
index 52473ca..a90ff7d 100644
--- a/debian/xsfbs/xsfbs.sh
+++ b/debian/xsfbs/xsfbs.sh
@@ -59,13 +59,6 @@ fi
ARCHITECTURE="$(dpkg --print-installation-architecture)"
-LAPTOP=""
-if [ -n "$(which laptop-detect)" ]; then
- if laptop-detect >/dev/null; then
- LAPTOP=true
- fi
-fi
-
if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
RECONFIGURE="true"
else
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
