Guido Guenther wrote: > Package: xserver-xorg-video-intel > Version: 2:2.1.1-4 > Severity: normal > > Hi, > I've connected an intel mac mini with a Panasonic PT AX-100E LCD beamer. > While this worked fine using the analog cable (either with a 1280x768 or > a 1280x720 resolution) using the digital signal with a DVI to HDMI > adapter doesn't work for high resolutions. 1024x768 and lower > resolutions are fine while higher resolutions don't display any image. > Looking at the log the calculated vert refresh rate seems to be wrong > since it's always zero: > > For the 1280x768 mode: > > (II) intel(0): Modeline "1280x768"x0.0 80.14 1280 1344 1480 1680 768 769 > 772 795 (47.7 kHz) > (II) intel(0): Adjusted mode for pipe A: > (II) intel(0): Modeline "1280x768"x0.0 80.14 1280 1344 1480 1680 768 769 > 772 795 (47.7 kHz) > chosen: dotclock 160457 vco 1604571 ((m 117, m1 20, m2 5), n 5, (p 10, p1 1, > p2 10)) > > and for the 1280x720 mode (coming from a handcrafted modeline in xorg.conf): > > (II) intel(0): Modeline "1280x720"x0.0 74.52 1280 1312 1368 1676 720 724 > 730 750 (44.5 kHz) > (II) intel(0): Adjusted mode for pipe A: > (II) intel(0): Modeline "1280x720"x0.0 74.52 1280 1312 1368 1676 720 724 > 730 750 (44.5 kHz) > chosen: dotclock 148800 vco 1488000 ((m 93, m1 15, m2 6), n 4, (p 10, p1 1, > p2 10)) > > The x0.0 looks like a driver bug. The log says further down for these > tow modes: > > (EE) intel(0): I830 Vblank Pipe Setup Failed 0 > (EE) intel(0): I830 Vblank Pipe Setup Failed 0 > > while everything looks o.k. for 1024x768. > > Any ideas? >
Does xserver-xorg-video-intel 2.2.0 from unstable help? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
