.gitignore | 1
INSTALL | 103 ++--
Makefile.am | 5
Makefile.in | 143 +++---
aclocal.m4 | 1136 ++++++++++++++++++++++++++++++++++++++----------
config.guess | 34 +
config.h.in | 12
config.sub | 36 +
configure | 1299 ++++++++++++++++++++++++++++++++++++-------------------
configure.ac | 7
debian/changelog | 5
depcomp | 64 ++
install-sh | 348 +++++++++++---
ltmain.sh | 233 ++++++---
missing | 61 +-
mkinstalldirs | 5
src/Makefile.am | 8
src/Makefile.in | 138 +++--
src/accept.c | 5
src/authutil.c | 51 --
src/connect.c | 13
src/getauth.c | 11
src/iceauth.c | 33 -
src/listen.c | 11
src/listenwk.c | 2
src/misc.c | 22
src/process.c | 26 -
src/register.c | 30 -
src/setauth.c | 22
29 files changed, 2655 insertions(+), 1209 deletions(-)
New commits:
commit 8d0d1ea2cb9f8d48ac3d8091cac5768c4dc9e8eb
Author: Brice Goglin <[EMAIL PROTECTED]>
Date: Tue Aug 21 09:16:32 2007 +0200
Prepare changelog for upload
diff --git a/debian/changelog b/debian/changelog
index 0199005..1988692 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-libice (2:1.0.4-1) UNRELEASED; urgency=low
+libice (2:1.0.4-1) unstable; urgency=low
[ Julien Cristau ]
* Sync package sections with the override.
@@ -8,7 +8,7 @@ libice (2:1.0.4-1) UNRELEASED; urgency=low
* Fix typo in long descriptions, thanks Philippe Cloutier
(closes: #436009).
- -- Brice Goglin <[EMAIL PROTECTED]> Tue, 21 Aug 2007 09:14:40 +0200
+ -- Brice Goglin <[EMAIL PROTECTED]> Tue, 21 Aug 2007 09:16:11 +0200
libice (2:1.0.3-3) unstable; urgency=low
commit b774c84e232d4b44ff89044aa21dd8f38be6252d
Author: Brice Goglin <[EMAIL PROTECTED]>
Date: Tue Aug 21 09:15:22 2007 +0200
New upstream release
diff --git a/INSTALL b/INSTALL
index 54caf7c..5458714 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,13 +1,19 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
- This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
- These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -20,9 +26,9 @@ debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
+the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -32,20 +38,17 @@ some point `config.cache' contains results you don't want
to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -67,51 +70,49 @@ The simplest way to compile this package is:
Compilers and Options
=====================
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
- You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
Installation Names
==================
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
@@ -122,7 +123,7 @@ option `--program-prefix=PREFIX' or
`--program-suffix=SUFFIX'.
Optional Features
=================
- Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -137,11 +138,11 @@ you can use the `configure' options `--x-includes=DIR' and
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -156,7 +157,7 @@ where SYSTEM can have one of these forms:
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
@@ -167,9 +168,9 @@ eventually be run) with `--host=TYPE'.
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -178,7 +179,7 @@ A warning: not all `configure' scripts look for a site
script.
Defining Variables
==================
- Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -186,14 +187,18 @@ them in the `configure' command line, using `VAR=value'.
For example:
./configure CC=/usr/local2/bin/gcc
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
`configure' Invocation
======================
- `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
`--help'
`-h'
diff --git a/Makefile.in b/Makefile.in
index e27740a..cd5d2d3 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,15 +14,11 @@
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -36,18 +32,18 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
+subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(srcdir)/ice.pc.in $(top_srcdir)/configure AUTHORS COPYING \
ChangeLog INSTALL NEWS config.guess config.sub depcomp \
install-sh ltmain.sh missing mkinstalldirs
-subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = ice.pc
@@ -55,10 +51,11 @@ SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -68,6 +65,8 @@ am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
@@ -83,8 +82,6 @@ GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
@@ -114,6 +111,7 @@ FFLAGS = @FFLAGS@
GREP = @GREP@
ICE_CFLAGS = @ICE_CFLAGS@
ICE_LIBS = @ICE_LIBS@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -122,12 +120,14 @@ LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LINT = @LINT@
+LINTLIB = @LINTLIB@
+LINT_FLAGS = @LINT_FLAGS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -138,19 +138,20 @@ PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
+SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XTRANS_CFLAGS = @XTRANS_CFLAGS@
XTRANS_LIBS = @XTRANS_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -162,6 +163,7 @@ build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -189,8 +191,11 @@ program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
SUBDIRS = src
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = ice.pc
@@ -237,7 +242,7 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -261,10 +266,9 @@ clean-libtool:
distclean-libtool:
-rm -f libtool
-uninstall-info-am:
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
- test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
+ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
@@ -311,8 +315,7 @@ $(RECURSIVE_TARGETS):
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
+$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
@@ -414,24 +417,22 @@ distclean-tags:
distdir: $(DISTFILES)
$(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/.
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -445,7 +446,7 @@ distdir: $(DISTFILES)
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
@@ -453,6 +454,8 @@ distdir: $(DISTFILES)
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
@@ -463,7 +466,7 @@ distdir: $(DISTFILES)
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {}
\; \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
@@ -538,7 +541,7 @@ distcheck: dist
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -563,7 +566,7 @@ all-am: Makefile $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
@@ -612,12 +615,20 @@ info-am:
install-data-am: install-pkgconfigDATA
+install-dvi: install-dvi-recursive
+
install-exec-am:
+install-html: install-html-recursive
+
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -638,25 +649,26 @@ ps: ps-recursive
ps-am:
-uninstall-am: uninstall-info-am uninstall-pkgconfigDATA
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-libtool clean-recursive \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
- distclean-generic distclean-hdr distclean-libtool \
- distclean-recursive distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-pkgconfigDATA install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive \
- mostlyclean mostlyclean-generic mostlyclean-libtool \
- mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am uninstall-info-am \
+uninstall-am: uninstall-pkgconfigDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-generic \
+ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+ dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \
+ distclean distclean-generic distclean-hdr distclean-libtool \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-pkgconfigDATA
@@ -664,6 +676,9 @@ ChangeLog:
(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv
.changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git
directory not found: installing possibly empty changelog.' >&2)
dist-hook: ChangeLog
+
[EMAIL PROTECTED]@lint:
[EMAIL PROTECTED]@ (cd src && $(MAKE) $(MFLAGS) lint)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/aclocal.m4 b/aclocal.m4
index f18ffa3..040be56 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
+# 2005, 2006 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,9 +11,14 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
+# serial 51 Debian 1.5.24-1 AC_PROG_LIBTOOL
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -176,7 +181,7 @@ test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o
# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
@@ -263,8 +268,9 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e
"s%^$host_alias-%%"`
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$rm conftest*
@@ -276,8 +282,9 @@ $rm conftest*
# Check for linker boilerplate output or warnings with
# the simple link test code.
AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$rm conftest*
@@ -293,12 +300,20 @@ $rm conftest*
# If we don't find anything, use the default library path according
# to the aix ld manual.
AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File
Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e
"$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext
2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0
*\(.*\)$/\1/; p; }
-}'`; fi],[])
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e
"$lt_aix_libpath_sed"`
+fi],[])
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
])# _LT_AC_SYS_LIBPATH_AIX
@@ -529,13 +544,17 @@ ia64-*-hpux*)
rm -rf conftest*
;;
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
x86_64-*linux*)
LD="${LD-ld} -m elf_i386"
;;
@@ -552,6 +571,9 @@
x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
;;
*64-bit*)
case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
@@ -623,7 +645,7 @@ AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
AC_CACHE_CHECK([$1], [$2],
[$2=no
ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$3"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -664,11 +686,12 @@ fi
# ------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
[$2=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $3"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
@@ -782,24 +805,27 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
fi
;;
*)
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
+ lt_cv_sys_max_cmd_len=$new_result &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
massive
+ # amounts of additional arguments before passing them to the linker.
+ # It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
;;
esac
])
@@ -1026,7 +1052,8 @@ fi
# ---------------------------------
# Check to see if options -c and -o are simultaneously supported by compiler
AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
[_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
[_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
@@ -1034,7 +1061,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o
file.$ac_objext],
mkdir conftest
cd conftest
mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -1174,6 +1201,7 @@ else
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
@@ -1191,7 +1219,8 @@ fi
# -----------------------------
# PORTME Fill in your ld.so characteristics
AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -1205,20 +1234,58 @@ shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
+m4_if($1,[],[
if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED
-e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e
"s/^libraries://" -e "s,=/,/,g"`
+ if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/
/g'`
+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
+ lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory
2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec
$lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`echo $lt_search_path_spec`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
+fi])
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -1375,12 +1442,8 @@ darwin* | rhapsody*)
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
+ m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -1434,7 +1497,7 @@ freebsd* | dragonfly*)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
- freebsd*) # from 4.6 on
+ *) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -1497,7 +1560,7 @@ hpux9* | hpux10* | hpux11*)
postinstall_cmds='chmod 555 $lib'
;;
-interix3*)
+interix[[3-9]]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -1568,7 +1631,7 @@ linux* | k*bsd*-gnu)
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2));
skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e
's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s
2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' <
/etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:,
]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -1674,6 +1737,10 @@ osf3* | osf4* | osf5*)
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
+rdos*)
+ dynamic_linker=no
+ ;;
+
solaris*)
version_type=linux
need_lib_prefix=no
@@ -1779,7 +1846,8 @@ fi
# _LT_AC_TAGCONFIG
# ----------------
AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_ARG_WITH([tags],
[AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
[include additional configurations @<:@automatic@:>@])],
[tagnames="$withval"])
@@ -2040,7 +2108,7 @@ m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
# AC_PATH_TOOL_PREFIX
# -------------------
-# find a file program which can recognise shared library
+# find a file program which can recognize shared library
AC_DEFUN([AC_PATH_TOOL_PREFIX],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_MSG_CHECKING([for $1])
@@ -2103,7 +2171,7 @@ fi
# AC_PATH_MAGIC
# -------------
-# find a file program which can recognise a shared library
+# find a file program which can recognize a shared library
AC_DEFUN([AC_PATH_MAGIC],
[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -2250,7 +2318,7 @@ esac
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
