On Wed, Aug 08, 2007 at 01:07:23PM +0200, Brice Goglin wrote:
> Adrian Mariano wrote:
> > When I first installed, the mouse was on the ps/2 port. The
> > configuration that was supplied by the installer was
> >
> > Section "InputDevice"
> > Identifier "Configured Mouse"
> > Driver "mouse"
> > Option "CorePointer"
> > Option "Device" "/dev/input/mice"
> > Option "Protocol" "ImPS/2"
> > Option "Emulate3Buttons" "true"
> > EndSection
> >
>
> That's the default config provided by the installer.
>
> > The mouse did not work. I moved the mouse from the ps/2 port to the
> > USB port and it worked fine.
> >
> > Then I tried changing /dev/input/mice to /dev/psaux. The mouse WORKED
> > FINE with this setup.
>
> So PS/2 on /dev/psaux worked once. Then it would be a kernel problem or so.
>
> But you said earlier that pluging on PS/2 did not generate any character
> in "cat /dev/psaux" or "cat /dev/input/mice". This needs to be
> clarified. Either /dev/psaux works (and generates characters) or it
> doesn't at all.
>
> > Is it possible that some action (e.g. reboot) is necessary to cause
> > the kernel to realize there is a mouse on the ps/2 port?
> >
>
> I don't think so.
>
> Please check your BIOS in case there some config for the PS/2 port. And
> check whether PS/2 works in other Linux/OS if you can.
This is a brand new machine that has only the one OS installed. I
tried booting Knoppix and it wouldn't boot. So I don't think we're
going to see other OS results.
After observing that /dev/input/mice was responding to the mouse I
changed the X config to
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Buttons" "7"
Option "Resolution" "1000"
EndSection
and restarted X and at that point it started working. This is the
first time I've seen the ps/2 mouse work with /dev/input/mice.
This is basically the same X configuration that wasn't working when
the system first installed.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
