On Thu, Apr 26, 2007 at 18:07:13 +0200, Julien Cristau wrote: > On Wed, Apr 25, 2007 at 00:17:37 +0200, Tino Keitel wrote: > > > after upgrading to 2:2.0.0-1, the Xserver starts with 1280x1024. > > > > My TFT has 1680x1050, so I set this resolution using the 915resolution > > package. The desired resoltion is also listed in 915resolution -l. > > > 915resolution isn't needed with xf86-video-intel 2.0, because this > version doesn't use the bios for modesetting. However, it seems that
Uh, good to know. > the driver doesn't detect the correct mode in your case. > What kind of machine is that (laptop/desktop/...), and what kind of > monitor (laptop panel/vga/dvi/...)? It is a desktop (Mac mini Core Duo). The TFT is an Eizo S2110W, connected via DVI. > > > I disabled DDC in my config because I'll have an out-of-sync screen > > otherwise. > > > > Here are the config and log from the Xserver: > > Thanks for providing them! > > > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > > E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ, 965GM > > (II) Primary Device is: PCI 00:02:0 > > (--) Assigning device section with no busID to primary device > > (--) Chipset 945GM found > [snip] > > (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 > > (II) intel(0): Suspected Mac Mini, ignoring the LVDS > > (II) intel(0): I2C bus "LVDSDDC_C" removed. > > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. > > (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" > > registered at address 0x70. > > (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. > > (II) intel(0): Output TMDS-1 has no monitor section > > (II) intel(0): SDVO device VID/DID: 04:AA.03, clock range 25.0MHz - > > 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N > > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. > > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" > > registered at address 0x72. > > (II) intel(0): No SDVO device found on SDVOC > > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. > > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. > > (II) intel(0): Output TV has no monitor section > > (II) intel(0): Current clock rate multiplier: 8 > > (II) intel(0): Output VGA disconnected > > (II) intel(0): EDID for output VGA > > (II) intel(0): Output TMDS-1 connected > > (**) intel(0): Option "ddc" "off" > > (II) intel(0): EDID for output TMDS-1 > > (**) intel(0): Option "ddc" "off" > > (II) intel(0): EDID for output VGA > [snip] > > (II) intel(0): Not using default mode "1680x1050" (hsync out of range) > [snip] > > (II) intel(0): Printing probed modes for output TMDS-1 > > (II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 > > 801 804 828 (49.7 kHz) > > (II) intel(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 > > 769 772 795 (47.7 kHz) > > (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 > > 771 777 806 -hsync -vsync (48.4 kHz) > > (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 > > 605 628 +hsync +vsync (37.9 kHz) > > (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 > > 492 525 -hsync -vsync (31.5 kHz) > [snip] > > (II) intel(0): Output TMDS-1 using initial mode 1280x768 > > It might be helpful to report this bug upstream at bugs.freedesktop.org, > Product "xorg", Component "driver/intel" (make sure to attach your > config and log there too). Let us know it you do that. I would have thought that the Debian maintainers take care of it, as they might be aware of known issues and/or have a better contact to the xorg developers. Are you interested in the server log with DDC turned on? Regards, Tino -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
