--- Begin Message ---
Package: xserver-xfree86
Version: 4.1.0-2
Running debian/unstable on sun blade 100 Ultrasparc
ii xfree86-common 4.1.0-2 X Window System (XFree86) infrastructure
ii xserver-xfree8 4.1.0-2 the XFree86 X server
Starting mozilla immediately kills X with a message about overly large
beziers not yet being supported. Complete X session log is below.
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.4 sparc [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Aug 6 16:12:55 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:19:0) ATI Mach64 GR rev 39, Mem @ 0x03000000/24, 0x00426000/12,
I/O @ 0x0b00/8, BIOS @ 0x00440000/17
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(--) ATI(0): ATI 3D Rage XL or XC graphics controller detected.
(--) ATI(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision
0x00.
(--) ATI(0): PCI bus interface detected; block I/O base is 0x0B00.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0x037FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0x03800000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0x00426400.
(II) ATI(0): Using Block 1 MMIO aperture at 0x00426000.
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 315/11 (28.636) MHz.
(II) ATI(0): Generic Monitor: Using hsync range of 30.00-92.00 kHz
(II) ATI(0): Generic Monitor: Using vrefresh range of 50.00-85.00 Hz
(II) ATI(0): Maximum clock: 224.00 MHz
(II) ATI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(--) ATI(0): Virtual size is 1280x960 (pitch 1280)
(**) ATI(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) ATI(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) ATI(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) ATI(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) ATI(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(==) ATI(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(--) Depth 24 pixmap format is 32 bpp
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
26 128x128 slots
6 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) ATI(0): DPMS enabled
(WW) ATI(0): Option "UseFBDev" is not used
PEXExtensionInit: Couldn't open default PEX font file Roman_M
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Generic Mouse: always reports core events
(==) Generic Mouse: Buttons: 3
(**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!
Fatal server error:
Beziers this big not yet supported
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
xinit: connection to X server lost.
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
later,
chris
--
Chris Ricker [EMAIL PROTECTED]
--- End Message ---
