The screen is snowing using s3virge dx and XFree86 4.3.0.1, too. --- /var/log/XFree86.0.log ----------------------------------------------------- XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050901212727 [EMAIL PROTECTED]) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.8-16.0508-2 i686 [ELF] Build Date: 02 September 2005
This version of XFree86 has been extensively modified by the Debian Project, and is not supported by the XFree86 Project, Inc., in any way. Bugs should be reported to the Debian Bug Tracking System; see <URL: http://www.debian.org/Bugs/Reporting >. We strongly encourage the use of the "reportbug" package and command to ensure that bug reports contain as much useful information as possible. Before filing a bug report, you may want to consult the Debian X FAQ: XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz Module Loader present OS Kernel: Linux version 2.6.8-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Tue Aug 16 12:46:35 UTC 2005 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat May 20 10:28:07 2006 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "S3 Inc. ViRGE/DX or /GX" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "hu" (**) XKB: layout: "hu" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/CID" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 147b,7402 rev 11 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 11 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24c2 card 147b,7402 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 147b,7402 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 147b,7402 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 147b,7402 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 147b,7402 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 147b,7402 rev 01 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 147b,7402 rev 01 class 04,01,00 hdr 00 (II) PCI: 02:01:0: chip 5333,8a01 card 5333,8a01 rev 01 class 03,00,00 hdr 00 (II) PCI: 02:05:0: chip 10ec,8139 card 147b,7402 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000e (VGA_EN is set) (II) Bus 2 I/O range: [0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B] [2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xe4000000 - 0xebffffff (0x8000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(2:1:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0xe4000000/26 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff (II) Active PCI resource ranges: [0] -1 0 0xe9000000 - 0xe90000ff (0x100) MX[B] [1] -1 0 0xec002000 - 0xec0020ff (0x100) MX[B] [2] -1 0 0xec001000 - 0xec0011ff (0x200) MX[B] [3] -1 0 0x10000000 - 0x100003ff (0x400) MX[B] [4] -1 0 0xec000000 - 0xec0003ff (0x400) MX[B] [5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [6] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [8] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B] [9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [10] -1 0 0x00000500 - 0x0000051f (0x20) IX[B] [11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [13] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [14] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xe9000000 - 0xe90000ff (0x100) MX[B] [1] -1 0 0xec002000 - 0xec0020ff (0x100) MX[B] [2] -1 0 0xec001000 - 0xec0011ff (0x200) MX[B] [3] -1 0 0x10000000 - 0x100003ff (0x400) MX[B] [4] -1 0 0xec000000 - 0xec0003ff (0x400) MX[B] [5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [6] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [7] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [8] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B] [9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [10] -1 0 0x00000500 - 0x0000051f (0x20) IX[B] [11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [13] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [14] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe9000000 - 0xe90000ff (0x100) MX[B] [6] -1 0 0xec002000 - 0xec0020ff (0x100) MX[B] [7] -1 0 0xec001000 - 0xec0011ff (0x200) MX[B] [8] -1 0 0x10000000 - 0x100003ff (0x400) MX[B] [9] -1 0 0xec000000 - 0xec0003ff (0x400) MX[B] [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [11] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [15] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B] [16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [17] -1 0 0x00000500 - 0x0000051f (0x20) IX[B] [18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [20] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) LoadModule: "bitmap" (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Loading font Bitmap (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "s3virge" (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o (II) Module s3virge: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.8.6 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325, virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, trio 3d/2x, 86C362, 86C368 (II) Primary Device is: PCI 02:01:0 (--) Assigning device section with no busID to primary device (--) Chipset virge dx found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe9000000 - 0xe90000ff (0x100) MX[B] [6] -1 0 0xec002000 - 0xec0020ff (0x100) MX[B] [7] -1 0 0xec001000 - 0xec0011ff (0x200) MX[B] [8] -1 0 0x10000000 - 0x100003ff (0x400) MX[B] [9] -1 0 0xec000000 - 0xec0003ff (0x400) MX[B] [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [11] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [15] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B] [16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [17] -1 0 0x00000500 - 0x0000051f (0x20) IX[B] [18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [20] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe9000000 - 0xe90000ff (0x100) MX[B] [6] -1 0 0xec002000 - 0xec0020ff (0x100) MX[B] [7] -1 0 0xec001000 - 0xec0011ff (0x200) MX[B] [8] -1 0 0x10000000 - 0x100003ff (0x400) MX[B] [9] -1 0 0xec000000 - 0xec0003ff (0x400) MX[B] [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [11] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [18] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B] [19] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [20] -1 0 0x00000500 - 0x0000051f (0x20) IX[B] [21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [23] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [24] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24 (==) S3VIRGE(0): RGB weight 888 (==) S3VIRGE(0): Default visual is TrueColor (==) S3VIRGE(0): Using HW Cursor (==) S3VIRGE(0): Using fb. (==) S3VIRGE(0): mx_cr3a_fix. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Reloading /usr/X11R6/lib/modules/libvbe.a (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) S3VIRGE(0): initializing int10 (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000 (II) S3VIRGE(0): VESA BIOS detected (II) S3VIRGE(0): VESA VBE Version 2.0 (II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB (II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. ViRGE /DX /GX (II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1 (II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) S3VIRGE(0): VESA VBE OEM Product: ViRGE /DX /GX (II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B (--) S3VIRGE(0): Chipset: "virge dx" (==) S3VIRGE(0): XVideo supported. (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) S3VIRGE(0): VESA VBE DDC supported (II) S3VIRGE(0): VESA VBE DDC Level 2 (II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec. (II) S3VIRGE(0): VESA VBE DDC read successfully (II) S3VIRGE(0): Manufacturer: ACR Model: ad18 Serial#: 1397753597 (II) S3VIRGE(0): Year: 2005 Week: 35 (II) S3VIRGE(0): EDID Version: 1.3 (II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) S3VIRGE(0): Sync: Separate (II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27 (II) S3VIRGE(0): Gamma: 2.20 (II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) S3VIRGE(0): Default color space is primary color space (II) S3VIRGE(0): First detailed timing is preferred mode (II) S3VIRGE(0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 (II) S3VIRGE(0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 (II) S3VIRGE(0): Supported VESA Video Modes: (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): [EMAIL PROTECTED] (II) S3VIRGE(0): Manufacturer's mask: 0 (II) S3VIRGE(0): Supported Future Video Modes: (II) S3VIRGE(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) S3VIRGE(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) S3VIRGE(0): Supported additional Video Mode: (II) S3VIRGE(0): clock: 108.0 MHz Image Size: 338 x 270 mm (II) S3VIRGE(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) S3VIRGE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) S3VIRGE(0): Serial No: ETL1809137 (II) S3VIRGE(0): Monitor name: Acer AL1714 (II) S3VIRGE(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) (--) S3VIRGE(0): videoram: 4096k (--) S3VIRGE(0): Detected current MCLK value of 45.000 MHz (WW) S3VIRGE(0): Generic Monitor: Using default hsync range of 30.00-82.00kHz (WW) S3VIRGE(0): Generic Monitor: using default vrefresh range of 50.00-75.00Hz (II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz (II) S3VIRGE(0): Not using default mode "640x350" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x175" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "640x400" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x200" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "720x400" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "360x200" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x240" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "800x600" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "400x300" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "512x384" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "512x384" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range) (II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range) (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) (II) S3VIRGE(0): Not using default mode "1280x1024" (width too large for virtual size) (II) S3VIRGE(0): Not using default mode "1280x1024" (width too large for virtual size) (II) S3VIRGE(0): Not using default mode "1280x960" (width too large for virtual size) (II) S3VIRGE(0): Not using default mode "1152x864" (width too large for virtual size) (II) S3VIRGE(0): Not using default mode "1152x768" (width too large for virtual size) (--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024) (**) S3VIRGE(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) S3VIRGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) S3VIRGE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) S3VIRGE(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) S3VIRGE(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D) (II) S3VIRGE(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) S3VIRGE(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) (II) S3VIRGE(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) S3VIRGE(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) (II) S3VIRGE(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (II) S3VIRGE(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) (II) S3VIRGE(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (II) S3VIRGE(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) S3VIRGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (II) S3VIRGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (II) S3VIRGE(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D) (II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) (II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) (II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync (**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (--) S3VIRGE(0): Display dimensions: (340, 270) mm (--) S3VIRGE(0): DPI set to (76, 72) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xe4000000 - 0xe7ffffff (0x4000000) MS[B] [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [2] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xe9000000 - 0xe90000ff (0x100) MX[B] [7] -1 0 0xec002000 - 0xec0020ff (0x100) MX[B] [8] -1 0 0xec001000 - 0xec0011ff (0x200) MX[B] [9] -1 0 0x10000000 - 0x100003ff (0x400) MX[B] [10] -1 0 0xec000000 - 0xec0003ff (0x400) MX[B] [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [12] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [19] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B] [20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [21] -1 0 0x00000500 - 0x0000051f (0x20) IX[B] [22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [25] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) S3VIRGE(0): Write-combining range (0xe4000000,0x400000) (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (**) S3VIRGE(0): Using FB (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles CPU to Screen color expansion Solid Horizontal and Vertical Lines Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 16 128x128 slots 4 256x256 slots (==) S3VIRGE(0): Backing store disabled (==) S3VIRGE(0): Silken mouse enabled (**) Option "dpms" (**) S3VIRGE(0): DPMS enabled (II) S3VIRGE(0): Using overlay video (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Keyboard "Generic Keyboard" handled by legacy driver (**) Option "Protocol" "ImPS/2" (**) Configured Mouse: Protocol: "ImPS/2" (**) Option "CorePointer" (**) Configured Mouse: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "true" (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 5 (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) Configured Mouse: ps2EnableDataReporting: succeeded Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 SetClientVersion: 0 9 --- /etc/X11/XF86Config-4 ----------------------------------------------------- # XF86Config-4 (XFree86 X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # This file is automatically updated on xserver-xfree86 package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xfree86 # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom # md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure xserver-xfree86 Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/CID" FontPath "/usr/lib/X11/fonts/Speedo" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "hu" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "S3 Inc. ViRGE/DX or /GX" Driver "s3virge" EndSection Section "Monitor" Identifier "Generic Monitor" # HorizSync 28-50 # VertRefresh 43-75 Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "S3 Inc. ViRGE/DX or /GX" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "DRI" Mode 0666 EndSection --- from lspci -v -v ----------------------------------------------------- 0000:02:01.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) (prog-if 00 [VGA]) Subsystem: S3 Inc. ViRGE/DX Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 209 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=64M] _______________________________________________________________________________ Ingyen filmnézés akár 72 órán át! http://teka.t-online.hu
