Jeremy Nickurak <[EMAIL PROTECTED]> writes:
> Can we see you xorg.conf?
Sure. It is attached below.
> Does the system respond to ssh or other remote connections?
It responds to 'ping' :-)
I also tried ssh from putty on a Windows-box, but it kept giving an
error and shutting down putty after accepting username and
password. Apparently putty writes an error log with the exact error
message, but it was nowhere to be found. I gave up searching after 30
mins, and hard-booted the Debian-box instead.
> Are you using evdev for any input devices?
I use a USB-mouse and keyboard. Here is lsmod's output:
$ lsmod
Module Size Used by Not tainted
mga 97820 1
irda 153664 0 (autoclean)
parport_pc 23880 1 (autoclean)
lp 6724 0
apm 9964 2 (autoclean)
af_packet 13000 0 (autoclean)
emu10k1-gp 1288 0 (unused)
gameport 1676 0 [emu10k1-gp]
snd-bt87x 6504 0
sd_mod 11756 0 (autoclean) (unused)
dm-mod 46808 0 (unused)
usb-storage 65088 0 (unused)
keybdev 2084 0 (unused)
mousedev 4148 2
usb-uhci 23312 0 (unused)
hid 21220 0 (unused)
input 3648 0 [keybdev mousedev hid]
usbcore 62892 1 [usb-storage usb-uhci hid]
sg 31900 0 (unused)
ide-scsi 10032 0
scsi_mod 95140 3 [sd_mod usb-storage sg ide-scsi]
agpgart 46244 3
saa5249 7260 0 (unused)
tulip 40832 1
crc32 2912 0 [tulip]
paride 3968 0 (unused)
parport 26504 1 [parport_pc lp paride]
tuner 10344 1 (autoclean)
tvaudio 13576 1 (autoclean)
msp3400 17536 1 (autoclean)
bttv 95840 0 (unused)
i2c-algo-bit 7688 1 [bttv]
i2c-core 13508 0 [saa5249 tuner tvaudio msp3400 bttv
i2c-algo-bit]
videodev 6464 3 [saa5249 bttv]
snd-emu10k1-synth 4700 0 (unused)
snd-emux-synth 27836 0 [snd-emu10k1-synth]
snd-seq-oss 26752 0 (unused)
snd-seq-midi 3712 0 (unused)
snd-seq-midi-emul 4752 0 [snd-emux-synth]
snd-seq-virmidi 2968 0 [snd-emux-synth]
snd-seq-midi-event 3072 0 [snd-seq-oss snd-seq-midi snd-seq-virmidi]
snd-seq 37680 2 [snd-emux-synth snd-seq-oss
snd-seq-midi snd-seq-midi-emul snd-seq-virmidi snd-seq-midi-event]
snd-emu10k1 95556 0 [snd-emu10k1-synth]
snd-pcm-oss 38368 0 (unused)
snd-mixer-oss 13560 0 [snd-pcm-oss]
snd-hwdep 4608 0 [snd-emux-synth snd-emu10k1]
snd-util-mem 1264 0 [snd-emux-synth snd-emu10k1]
snd-ac97-codec 75072 0 [snd-emu10k1]
snd-pcm 58792 0 [snd-bt87x snd-emu10k1 snd-pcm-oss
snd-ac97-codec]
snd-timer 14468 0 [snd-seq snd-emu10k1 snd-pcm]
snd-rawmidi 13024 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1]
snd-seq-device 4164 0 [snd-emu10k1-synth snd-emux-synth snd-seq-oss
snd-seq-midi snd-seq snd-emu10k1 snd-rawmidi]
snd 35588 0 [snd-bt87x snd-emux-synth snd-seq-oss
snd-seq-midi snd-seq-virmidi snd-seq-midi-event snd-seq snd-emu10k1
snd-pcm-oss snd-mixer-oss snd-hwdep snd-util-mem snd-ac97-codec snd-pcm
snd-timer snd-rawmidi snd-seq-device]
soundcore 3940 14 [bttv snd]
snd-page-alloc 5508 0 [snd-bt87x snd-seq-oss snd-seq-midi snd-seq
snd-emu10k1 snd-mixer-oss snd-hwdep snd-pcm snd-timer snd-rawmidi
snd-seq-device snd]
binfmt_misc 5860 1
binfmt_aout 4420 0
autofs 9972 0 (unused)
vfat 10540 0 (unused)
fat 31960 0 [vfat]
rtc 6440 0 (autoclean)
ext2 49548 5 (autoclean)
ext3 81068 0 (autoclean)
jbd 42468 0 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
via82cxxx 10824 1 (autoclean)
ide-disk 16864 6 (autoclean)
unix 14960 38 (autoclean)
ide-core 108664 6 (autoclean) [usb-storage ide-scsi ide-detect
via82cxxx ide-disk]
> Sounds like the same symptoms as the evdev-with-bad-config crasher,
> #347681
Ok, thanks! I will try to read up on evdev and its conf.
//Jan
----------------------------------------------------------------------
# xorg.conf (Xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum
# dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font
server
# if the local font server has problems, we can fall back on
these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Matrox g400"
Driver "mga"
EndSection
Section "Monitor"
Identifier "Sony CPD-200GST"
Option "DPMS"
HorizSync 30-107
VertRefresh 48-120
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Matrox g400"
Monitor "Sony CPD-200GST"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
