Package: xbase-clients
Version: 6.8.2.dfsg.1-10
Severity: critical
Justification: breaks the whole system
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.14
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages xbase-clients depends on:
ii cpp 4:4.0.2-1 The GNU C preprocessor (cpp)
ii libc6 2.3.5-7 GNU C Library: Shared libraries an
ii libdmx1 6.8.2.dfsg.1-10 Distributed Multihead X client lib
ii libdps1 6.8.2.dfsg.1-10 Display PostScript (DPS) client li
ii libexpat1 1.95.8-3 XML parsing C library - runtime li
ii libfontconfig1 2.3.2-1.1 generic font configuration library
ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib
ii libfs6 6.8.2.dfsg.1-10 X Font Server library
ii libglu1-xorg [libglu1] 6.8.2.dfsg.1-10 Mesa OpenGL utility library [X.Org
ii libice6 6.8.2.dfsg.1-10 Inter-Client Exchange library
ii libncurses5 5.5-1 Shared libraries for terminal hand
ii libpng12-0 1.2.8rel-5 PNG library - runtime
ii libsm6 6.8.2.dfsg.1-10 X Window System Session Management
ii libxau6 6.8.2.dfsg.1-10 X Authentication library
ii libxaw8 6.8.2.dfsg.1-10 X Athena widget set library
ii libxcursor1 1.1.3-1 X cursor management library
ii libxext6 6.8.2.dfsg.1-10 X Window System miscellaneous exte
ii libxft2 2.1.7-1 FreeType-based font drawing librar
ii libxi6 6.8.2.dfsg.1-10 X Window System Input extension li
ii libxinerama1 6.8.2.dfsg.1-10 X Window System multi-head display
ii libxkbfile1 6.8.2.dfsg.1-10 X Keyboard Extension file parsing
ii libxkbui1 6.8.2.dfsg.1-10 X Keyboard Extension user interfac
ii libxmu6 6.8.2.dfsg.1-10 X Window System miscellaneous util
ii libxmuu1 6.8.2.dfsg.1-10 lightweight X Window System miscel
ii libxp6 6.8.2.dfsg.1-10 X Window System printing extension
ii libxpm4 6.8.2.dfsg.1-10 X pixmap library
ii libxrandr2 6.8.2.dfsg.1-10 X Window System Resize, Rotate and
ii libxrender1 1:0.9.0-2 X Rendering Extension client libra
ii libxss1 6.8.2.dfsg.1-10 X Screen Saver client-side library
ii libxt6 6.8.2.dfsg.1-10 X Toolkit Intrinsics
ii libxtrap6 6.8.2.dfsg.1-10 X Window System protocol-trapping
ii libxtst6 6.8.2.dfsg.1-10 X Window System event recording an
ii libxv1 6.8.2.dfsg.1-10 X Window System video extension li
ii libxxf86dga1 6.8.2.dfsg.1-10 X Direct Graphics Access extension
ii libxxf86misc1 6.8.2.dfsg.1-10 X miscellaneous extensions library
ii libxxf86vm1 6.8.2.dfsg.1-10 X Video Mode selection library
ii xlibmesa-gl [libgl1] 6.8.2.dfsg.1-10 Mesa 3D graphics library [X.Org]
ii xlibs 6.8.2.dfsg.1-10 X Window System client libraries m
ii xlibs-data 6.8.2.dfsg.1-10 X Window System client data
ii zlib1g 1:1.2.3-6 compression library - runtime
xbase-clients recommends no packages.
-- no debconf information
Hangs occurs with both nv and nvdia (propietary) drivers.
My card as seen by lspci -vvv:
VGA compatible controller: nVidia Corporation GeForce 6200 TurboCache(TM) (rev
a1) (prog-if 00 [VGA])
Subsystem: XFX Pine Group Inc.: Unknown device 2147
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 66
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e1000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at e2000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities
dmesg output:
Bootdata ok (command line is root=/dev/md1 ro bootkdb=es console=tty0 vga=0x317
video=vesafb:ywrap,pmipal)
Linux version 2.6.14 ([EMAIL PROTECTED]) (gcc versión 4.0.2 (Debian 4.0.2-2))
#1 Sat Nov 5 17:52:31 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f6e00
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
0x000000003fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
0x000000003fff3040
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
0x000000003fff7d80
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @
0x000000003fff7d00
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x0000000000000000
On node 0 totalpages: 262031
DMA zone: 3999 pages, LIFO batch:1
Normal zone: 258032 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
Nvidia board detected. Ignoring ACPI timer override.
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 48000000 (gap: 40000000:80000000)
Built 1 zonelists
Kernel command line: root=/dev/md1 ro bootkdb=es console=tty0 vga=0x317
video=vesafb:ywrap,pmipal
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1809.298 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1026956k/1048512k available (2123k kernel code, 20860k reserved, 671k
data, 148k init)
Calibrating delay using timer specific routine.. 3621.55 BogoMIPS (lpj=18107773)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Using local APIC timer interrupts.
Detected 12.564 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at c0000000
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: e3000000-e30fffff
PREFETCH window: e3100000-e31fffff
PCI: Bridge: 0000:00:0b.0
IO window: a000-afff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: 9000-9fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: 8000-8fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: e0000000-e2ffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 3072k,
total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is not VGA compatible
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60
seconds).
Hangcheck: Using monotonic_clock().
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
libata version 1.12 loaded.
sata_nv version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) ->
IRQ 217
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 217
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 217
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) ->
IRQ 225
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xE800 irq 225
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xE808 irq 225
ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c68 86:3e01 87:4063 88:407f
ata3: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata3: dev 0 configured for UDMA/133
scsi2 : sata_nv
ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c68 86:3e01 87:4063 88:407f
ata4: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/133
scsi3 : sata_nv
Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 >
Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_tables: (C) 2000-2002 Netfilter core team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: autorun ...
md: considering sdb15 ...
md: adding sdb15 ...
md: sdb14 has different UUID to sdb15
md: sdb13 has different UUID to sdb15
md: sdb12 has different UUID to sdb15
md: sdb11 has different UUID to sdb15
md: sdb10 has different UUID to sdb15
md: sdb9 has different UUID to sdb15
md: sdb8 has different UUID to sdb15
md: sdb7 has different UUID to sdb15
md: sdb6 has different UUID to sdb15
md: sdb1 has different UUID to sdb15
md: adding sda15 ...
md: sda14 has different UUID to sdb15
md: sda13 has different UUID to sdb15
md: sda12 has different UUID to sdb15
md: sda11 has different UUID to sdb15
md: sda10 has different UUID to sdb15
md: sda9 has different UUID to sdb15
md: sda8 has different UUID to sdb15
md: sda7 has different UUID to sdb15
md: sda6 has different UUID to sdb15
md: sda1 has different UUID to sdb15
md: created md10
md: bind<sda15>
md: bind<sdb15>
md: running: <sdb15><sda15>
raid1: raid set md10 active with 2 out of 2 mirrors
md: considering sdb14 ...
md: adding sdb14 ...
md: sdb13 has different UUID to sdb14
md: sdb12 has different UUID to sdb14
md: sdb11 has different UUID to sdb14
md: sdb10 has different UUID to sdb14
md: sdb9 has different UUID to sdb14
md: sdb8 has different UUID to sdb14
md: sdb7 has different UUID to sdb14
md: sdb6 has different UUID to sdb14
md: sdb1 has different UUID to sdb14
md: adding sda14 ...
md: sda13 has different UUID to sdb14
md: sda12 has different UUID to sdb14
md: sda11 has different UUID to sdb14
md: sda10 has different UUID to sdb14
md: sda9 has different UUID to sdb14
md: sda8 has different UUID to sdb14
md: sda7 has different UUID to sdb14
md: sda6 has different UUID to sdb14
md: sda1 has different UUID to sdb14
md: created md9
md: bind<sda14>
md: bind<sdb14>
md: running: <sdb14><sda14>
md9: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb14
raid0: comparing sdb14(39062400) with sdb14(39062400)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda14
raid0: comparing sda14(39062400) with sdb14(39062400)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 78124800 blocks.
raid0 : conf->hash_spacing is 78124800 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdb13 ...
md: adding sdb13 ...
md: sdb12 has different UUID to sdb13
md: sdb11 has different UUID to sdb13
md: sdb10 has different UUID to sdb13
md: sdb9 has different UUID to sdb13
md: sdb8 has different UUID to sdb13
md: sdb7 has different UUID to sdb13
md: sdb6 has different UUID to sdb13
md: sdb1 has different UUID to sdb13
md: adding sda13 ...
md: sda12 has different UUID to sdb13
md: sda11 has different UUID to sdb13
md: sda10 has different UUID to sdb13
md: sda9 has different UUID to sdb13
md: sda8 has different UUID to sdb13
md: sda7 has different UUID to sdb13
md: sda6 has different UUID to sdb13
md: sda1 has different UUID to sdb13
md: created md8
md: bind<sda13>
md: bind<sdb13>
md: running: <sdb13><sda13>
md8: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb13
raid0: comparing sdb13(39062400) with sdb13(39062400)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda13
raid0: comparing sda13(39062400) with sdb13(39062400)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 78124800 blocks.
raid0 : conf->hash_spacing is 78124800 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdb12 ...
md: adding sdb12 ...
md: sdb11 has different UUID to sdb12
md: sdb10 has different UUID to sdb12
md: sdb9 has different UUID to sdb12
md: sdb8 has different UUID to sdb12
md: sdb7 has different UUID to sdb12
md: sdb6 has different UUID to sdb12
md: sdb1 has different UUID to sdb12
md: adding sda12 ...
md: sda11 has different UUID to sdb12
md: sda10 has different UUID to sdb12
md: sda9 has different UUID to sdb12
md: sda8 has different UUID to sdb12
md: sda7 has different UUID to sdb12
md: sda6 has different UUID to sdb12
md: sda1 has different UUID to sdb12
md: created md7
md: bind<sda12>
md: bind<sdb12>
md: running: <sdb12><sda12>
raid1: raid set md7 active with 2 out of 2 mirrors
md: considering sdb11 ...
md: adding sdb11 ...
md: sdb10 has different UUID to sdb11
md: sdb9 has different UUID to sdb11
md: sdb8 has different UUID to sdb11
md: sdb7 has different UUID to sdb11
md: sdb6 has different UUID to sdb11
md: sdb1 has different UUID to sdb11
md: adding sda11 ...
md: sda10 has different UUID to sdb11
md: sda9 has different UUID to sdb11
md: sda8 has different UUID to sdb11
md: sda7 has different UUID to sdb11
md: sda6 has different UUID to sdb11
md: sda1 has different UUID to sdb11
md: created md6
md: bind<sda11>
md: bind<sdb11>
md: running: <sdb11><sda11>
raid1: raid set md6 active with 2 out of 2 mirrors
md: considering sdb10 ...
md: adding sdb10 ...
md: sdb9 has different UUID to sdb10
md: sdb8 has different UUID to sdb10
md: sdb7 has different UUID to sdb10
md: sdb6 has different UUID to sdb10
md: sdb1 has different UUID to sdb10
md: adding sda10 ...
md: sda9 has different UUID to sdb10
md: sda8 has different UUID to sdb10
md: sda7 has different UUID to sdb10
md: sda6 has different UUID to sdb10
md: sda1 has different UUID to sdb10
md: created md5
md: bind<sda10>
md: bind<sdb10>
md: running: <sdb10><sda10>
raid1: raid set md5 active with 2 out of 2 mirrors
md: considering sdb9 ...
md: adding sdb9 ...
md: sdb8 has different UUID to sdb9
md: sdb7 has different UUID to sdb9
md: sdb6 has different UUID to sdb9
md: sdb1 has different UUID to sdb9
md: adding sda9 ...
md: sda8 has different UUID to sdb9
md: sda7 has different UUID to sdb9
md: sda6 has different UUID to sdb9
md: sda1 has different UUID to sdb9
md: created md4
md: bind<sda9>
md: bind<sdb9>
md: running: <sdb9><sda9>
md4: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb9
raid0: comparing sdb9(249920) with sdb9(249920)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda9
raid0: comparing sda9(249920) with sdb9(249920)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 499840 blocks.
raid0 : conf->hash_spacing is 499840 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdb8 ...
md: adding sdb8 ...
md: sdb7 has different UUID to sdb8
md: sdb6 has different UUID to sdb8
md: sdb1 has different UUID to sdb8
md: adding sda8 ...
md: sda7 has different UUID to sdb8
md: sda6 has different UUID to sdb8
md: sda1 has different UUID to sdb8
md: created md3
md: bind<sda8>
md: bind<sdb8>
md: running: <sdb8><sda8>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdb7 ...
md: adding sdb7 ...
md: sdb6 has different UUID to sdb7
md: sdb1 has different UUID to sdb7
md: adding sda7 ...
md: sda6 has different UUID to sdb7
md: sda1 has different UUID to sdb7
md: created md2
md: bind<sda7>
md: bind<sdb7>
md: running: <sdb7><sda7>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering sdb6 ...
md: adding sdb6 ...
md: sdb1 has different UUID to sdb6
md: adding sda6 ...
md: sda1 has different UUID to sdb6
md: created md1
md: bind<sda6>
md: bind<sdb6>
md: running: <sdb6><sda6>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) ->
IRQ 233
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 233, io mem 0xe3201000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
usb 1-9: new full speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) ->
IRQ 50
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-9: USB disconnect, address 2
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) ->
IRQ 217
PCI: Setting latency timer of device 0000:00:0a.0 to 64
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ohci_hcd 0000:00:02.0: wakeup
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) ->
IRQ 225
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) ->
IRQ 58
bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 58, latency: 32, mmio: 0xe3100000
bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [card=78,insmod
option]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
bttv0: using tuner=5
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 2-0060: All bytes are equal. It is not a TEA5767
tuner 2-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .<6>usb 1-9: new full speed USB device using
ohci_hcd and address 3
. ok
ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]>
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) ->
IRQ 66
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[e3004000-e30047ff]
Max Packet=[4096]
intel8x0_measure_ac97_clock: measured 85154 usecs
intel8x0: clocking to 47345
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea5600d4b5ac]
ip_conntrack version 2.3 (4095 buckets, 32760 max) - 248 bytes per conntrack
Adding 249988k swap on /dev/sda5. Priority:-1 extents:1 across:249988k
Adding 249988k swap on /dev/sdb5. Priority:-2 extents:1 across:249988k
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
it87: Found IT8712F chip at 0x290, revision 5
XFS mounting filesystem md2
Ending clean XFS mount for filesystem: md2
XFS mounting filesystem md3
Starting XFS recovery on filesystem: md3 (dev: md3)
Ending XFS recovery on filesystem: md3 (dev: md3)
XFS mounting filesystem md5
Starting XFS recovery on filesystem: md5 (dev: md5)
Ending XFS recovery on filesystem: md5 (dev: md5)
XFS mounting filesystem md6
Starting XFS recovery on filesystem: md6 (dev: md6)
Ending XFS recovery on filesystem: md6 (dev: md6)
XFS mounting filesystem md7
Starting XFS recovery on filesystem: md7 (dev: md7)
Ending XFS recovery on filesystem: md7 (dev: md7)
XFS mounting filesystem md9
Ending clean XFS mount for filesystem: md9
ACPI: CPU0 (power states: C1[C1])
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) ->
IRQ 66
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7174 Tue Mar 22
06:45:40 PST 2005
