Package: xbase-clients
Version: 4.3.0.1
I have both 2.4 and 2.6*, and I typically update only once a week*, BUT
it was only after this last update that X wouldn't run. (output found
at end)
I'm guessing previous versions checked which kernel was in use (thus
saving me from the /dev/*-related problems)? Could that be done, (or
has it already)?
I've not upped the severity because this would only affect people with
both kernels on a single system (silly us).
If you felt I've skimped on any information, I'll send everything but
my mother's maiden name and my credit card number.
*2.4 and 2.6: there have been other problems I've had to work around.
*once a week: That is to say, all packages are uptodate as of the 12th.
-Eric
(II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70
kHz, PixClock max 110 MHz
(--) I810(0): Chipset: "i810e"
(--) I810(0): Linear framebuffer at 0xF8000000
(--) I810(0): IO registers at addr 0xFFA80000
(EE) GARTInit: Unable to open /dev/agpgart (No such device)
(EE) I810(0): AGP GART support is not available. Make sure your kernel
has
agpgart support or that the agpgart kernel module is loaded.
(II) UnloadModule: "i810"
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R6/lib/modules/libvbe.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
