> > I'll admit to not having a deep knowledge of debconf, so I'm not sure > > why the original code is wrong. There is a db_get on > > xserver-xfree86/config/monitor/selection-method before the above > > message, but I never see the question. > > db_get doesn't ask questions. Only db_input does that. Well, technically, > db_input enqueues a question for asking, and db_go runs the queue.
Okay, thanks for this clarification. (I figure maybe if I wait long enough to learn debconf, cdebconf will be ready. ;-]) > > I also can't see what in preinst is causing the autodetect_video_card > > question to be asked twice even though we've been through it already > > in config. > > Very annoying. Can you please send me your full config log file with the > db_subst->db-set change made? Attached. > > So obviously, there's some more work to do.... and I don't know how > > much of my testing problems were the result of my trying to cobble > > together configuration files from subversion. > > Well, here's one way to find out. I've just merged the latest changes onto > the trunk onto the debconf-overhaul branch, and run a diff between the two > trees: By the way, necrotic.deadbeast.net doesn't seem to be answering anonymous svn with the svn:// protocol. % svn ls svn://necrotic.deadbeast.net/xfree86/trunk svn: Can't connect to host 'necrotic.deadbeast.net': Connection refused % telnet necrotic.deadbeast.net svnserve Trying 216.37.46.189... telnet: Unable to connect to remote host: Connection refused hence my use of ViewCVS. > local/dexconf > xserver-xfree86.config.in > xserver-xfree86.templates Looks like all three of these may be relevant, but I only got config.in. I'm packing to leave town for a few days and don't really have time right now to go through my config.log to remove extraneous output from multiple runs. There are logs from at least three configurations, the first one of which definitely didn't work and the last one of which definitely worked with the exception of the multiple questions about autoconfiguration. Since I answered the questions pretty fast you'll be able to tell the differences between the runs trivially by looking at the timestamps, in addition to any other methods that may be more direct. If this doesn't do it for you for some reason, I'd be glad to repeat my trials and save specific config logs from each trial. I'm guessing that probably won't be necessary though. Have fun! -- Jay Berkenbilt <[EMAIL PROTECTED]> http://www.ql.org/q/
2004-09-26 04:36:23 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:36:23 PM-0400 not configuring default X server; manual modifications have been made -- please see /usr/share/doc/xfree86-common/FAQ.gz or /usr/share/doc/xfree86-common/FAQ.xhtml.gz 2004-09-26 04:36:23 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:36:23 PM-0400 configure_video_device(): no video driver modules found in /usr/X11R6/lib/modules/drivers 2004-09-26 04:36:23 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:36:23 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:36:23 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:36:23 PM-0400 auto_answer(): auto-answering with "vesa" 2004-09-26 04:36:23 PM-0400 auto_answer(): asking xserver-xfree86/config/device/driver 2004-09-26 04:36:25 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:36:25 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:36:25 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:36:25 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:36:25 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:36:25 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:36:25 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:36:25 PM-0400 auto_answer(): running "validate_bus_id_db_input high xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:36:25 PM-0400 auto_answer(): auto-answering with "PCI:1:0:0" 2004-09-26 04:36:27 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:36:27 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:36:27 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:36:27 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:36:27 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:36:27 PM-0400 auto_answer(): asking xserver-xfree86/config/device/use_fbdev 2004-09-26 04:36:27 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:36:27 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:36:27 PM-0400 auto_answer(): auto-answering with "xfree86" 2004-09-26 04:36:28 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:36:28 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:36:28 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:36:28 PM-0400 auto_answer(): auto-answering with "pc104" 2004-09-26 04:36:29 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:36:29 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:36:29 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:36:29 PM-0400 auto_answer(): auto-answering with "us" 2004-09-26 04:36:30 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:36:30 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:36:30 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:36:30 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:36:30 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:36:30 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_mouse 2004-09-26 04:36:32 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:36:32 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:36:32 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:36:32 PM-0400 auto_answer(): auto-answering with "/dev/psaux" 2004-09-26 04:36:32 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/mouse/port 2004-09-26 04:36:34 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:36:34 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:36:34 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:36:34 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "" 2004-09-26 04:36:34 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:36:34 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "" 2004-09-26 04:36:34 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:36:34 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "" 2004-09-26 04:36:34 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:36:34 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:36:34 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_monitor 2004-09-26 04:36:36 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:36:36 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:36:36 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:36:36 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:36:36 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:36:36 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:36:36 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:36:36 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:36:36 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:36:36 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:36:36 PM-0400 configure_monitor(): using "" selection method 2004-09-26 04:36:36 PM-0400 configure_monitor(): horizontal sync configured to "" 2004-09-26 04:36:36 PM-0400 configure_monitor(): vertical refresh configured to "" 2004-09-26 04:36:36 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:36:36 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:36 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:36 PM-0400 auto_answer(): auto-answering with "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:36 PM-0400 auto_answer(): asking xserver-xfree86/config/display/modes 2004-09-26 04:36:39 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:39 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:36:39 PM-0400 auto_answer(): auto-answering with "24" 2004-09-26 04:36:39 PM-0400 auto_answer(): asking xserver-xfree86/config/display/default_depth 2004-09-26 04:36:40 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:36:43 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:36:43 PM-0400 not configuring default X server; manual modifications have been made -- please see /usr/share/doc/xfree86-common/FAQ.gz or /usr/share/doc/xfree86-common/FAQ.xhtml.gz 2004-09-26 04:36:43 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:36:43 PM-0400 configure_video_device(): no video driver modules found in /usr/X11R6/lib/modules/drivers 2004-09-26 04:36:43 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:36:43 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:36:43 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "ati" 2004-09-26 04:36:43 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/driver per exit status of db_input 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:36:43 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:36:43 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:36:43 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:36:43 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:36:43 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:36:43 PM-0400 auto_answer(): running "validate_bus_id_db_input high xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "PCI:1:0:0" 2004-09-26 04:36:43 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:36:43 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:36:43 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "false" 2004-09-26 04:36:43 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/use_fbdev per exit status of db_input 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:36:43 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "xfree86" 2004-09-26 04:36:43 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:36:43 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "pc104" 2004-09-26 04:36:43 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:36:43 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "us" 2004-09-26 04:36:43 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:36:43 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:36:43 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:36:43 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_mouse per exit status of db_input 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:36:43 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:36:43 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "/dev/input/mice" 2004-09-26 04:36:43 PM-0400 auto_answer(): not asking xserver-xfree86/config/inputdevice/mouse/port per exit status of db_input 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:36:43 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:36:43 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:36:43 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "Nokia 446XproNOK" 2004-09-26 04:36:43 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:36:43 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "" 2004-09-26 04:36:43 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:36:43 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "" 2004-09-26 04:36:43 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:36:43 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:36:43 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_monitor per exit status of db_input 2004-09-26 04:36:43 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:36:44 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:36:44 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:36:44 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:36:44 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:36:44 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:36:44 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:36:44 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:36:44 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:36:44 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:36:44 PM-0400 configure_monitor(): using "" selection method 2004-09-26 04:36:44 PM-0400 configure_monitor(): horizontal sync configured to "" 2004-09-26 04:36:44 PM-0400 configure_monitor(): vertical refresh configured to "" 2004-09-26 04:36:44 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:36:44 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:44 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:44 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:44 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/modes per exit status of db_input 2004-09-26 04:36:44 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:44 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:36:44 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "24" 2004-09-26 04:36:44 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/default_depth per exit status of db_input 2004-09-26 04:36:44 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:36:47 PM-0400 select_default_x_server(): X server symlink exists and points to executable X server; capping X server question priority at medium 2004-09-26 04:36:47 PM-0400 select_default_x_server(): $owners does not equal $choices: "xserver-xfree86" != "" 2004-09-26 04:36:47 PM-0400 select_default_x_server(): $owners has only one value; shared/default-x-server will not be asked 2004-09-26 04:36:47 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_video_card" with default "true" 2004-09-26 04:36:47 PM-0400 auto_answer(): auto-answering with "true" 2004-09-26 04:36:47 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_video_card 2004-09-26 04:36:48 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_video_card is now "true" 2004-09-26 04:36:48 PM-0400 select_default_x_server(): could not autodetect X server: no video card detected, or no server known for it 2004-09-26 04:36:48 PM-0400 select_default_x_server(): seen flag of shared/default-x-server is false 2004-09-26 04:36:48 PM-0400 auto_answer(): running "db_input medium shared/default-x-server" with default "xserver-xfree86" 2004-09-26 04:36:48 PM-0400 auto_answer(): auto-answering with "xserver-xfree86" 2004-09-26 04:36:48 PM-0400 auto_answer(): not asking shared/default-x-server per exit status of db_input 2004-09-26 04:36:48 PM-0400 auto_answer(): value of shared/default-x-server is now "xserver-xfree86" 2004-09-26 04:36:48 PM-0400 select_default_x_server(): X server symlink exists and points to executable X server; capping X server question priority at medium 2004-09-26 04:36:48 PM-0400 select_default_x_server(): $owners has only one value; shared/default-x-server will not be asked 2004-09-26 04:36:48 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_video_card" with default "true" 2004-09-26 04:36:48 PM-0400 auto_answer(): auto-answering with "true" 2004-09-26 04:36:48 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_video_card 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_video_card is now "true" 2004-09-26 04:36:49 PM-0400 select_default_x_server(): could not autodetect X server: no video card detected, or no server known for it 2004-09-26 04:36:49 PM-0400 select_default_x_server(): seen flag of shared/default-x-server is false 2004-09-26 04:36:49 PM-0400 auto_answer(): running "db_input medium shared/default-x-server" with default "xserver-xfree86" 2004-09-26 04:36:49 PM-0400 auto_answer(): auto-answering with "xserver-xfree86" 2004-09-26 04:36:49 PM-0400 auto_answer(): not asking shared/default-x-server per exit status of db_input 2004-09-26 04:36:49 PM-0400 auto_answer(): value of shared/default-x-server is now "xserver-xfree86" 2004-09-26 04:36:49 PM-0400 configure_xfree86_x_server(): /etc/X11/XF86Config-4 file exists; capping configuration question priority at medium 2004-09-26 04:36:49 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:36:49 PM-0400 configure_video_device(): could not autodetect X server driver: no video card detected, or no driver known for it 2004-09-26 04:36:49 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:36:49 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "ati" 2004-09-26 04:36:49 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/driver per exit status of db_input 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:36:49 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:36:49 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:36:49 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:36:49 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:36:49 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:36:49 PM-0400 auto_answer(): running "validate_bus_id_db_input medium xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:36:49 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "PCI:1:0:0" 2004-09-26 04:36:49 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:36:49 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:36:49 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:36:49 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "false" 2004-09-26 04:36:49 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/use_fbdev per exit status of db_input 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:36:49 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:36:49 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "xfree86" 2004-09-26 04:36:49 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:36:49 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:36:49 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "pc104" 2004-09-26 04:36:49 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:36:49 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:36:49 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "us" 2004-09-26 04:36:49 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:36:49 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:36:49 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:36:49 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:36:50 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:36:50 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_mouse per exit status of db_input 2004-09-26 04:36:50 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:36:50 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:36:50 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:36:50 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "/dev/input/mice" 2004-09-26 04:36:50 PM-0400 auto_answer(): not asking xserver-xfree86/config/inputdevice/mouse/port per exit status of db_input 2004-09-26 04:36:50 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:36:50 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:36:50 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:36:50 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "Nokia 446XproNOK" 2004-09-26 04:36:50 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:36:50 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "" 2004-09-26 04:36:50 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:36:50 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "" 2004-09-26 04:36:50 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:36:50 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:36:50 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_monitor per exit status of db_input 2004-09-26 04:36:50 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:36:50 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:36:50 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:36:50 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:36:50 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:36:50 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:36:50 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:36:50 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:36:50 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:36:50 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:36:50 PM-0400 configure_monitor(): using "" selection method 2004-09-26 04:36:50 PM-0400 configure_monitor(): horizontal sync configured to "" 2004-09-26 04:36:50 PM-0400 configure_monitor(): vertical refresh configured to "" 2004-09-26 04:36:50 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:36:50 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:50 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:50 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:50 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/modes per exit status of db_input 2004-09-26 04:36:50 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:36:50 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:36:50 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "24" 2004-09-26 04:36:50 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/default_depth per exit status of db_input 2004-09-26 04:36:50 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:41:41 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:41:41 PM-0400 not configuring default X server; manual modifications have been made -- please see /usr/share/doc/xfree86-common/FAQ.gz or /usr/share/doc/xfree86-common/FAQ.xhtml.gz 2004-09-26 04:41:41 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:41:41 PM-0400 configure_video_device(): no video driver modules found in /usr/X11R6/lib/modules/drivers 2004-09-26 04:41:41 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:41:41 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:41:41 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:41:41 PM-0400 auto_answer(): auto-answering with "vesa" 2004-09-26 04:41:41 PM-0400 auto_answer(): asking xserver-xfree86/config/device/driver 2004-09-26 04:41:44 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:41:44 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:41:44 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:41:44 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:41:44 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:41:44 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:41:44 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:41:44 PM-0400 auto_answer(): running "validate_bus_id_db_input high xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:41:44 PM-0400 auto_answer(): auto-answering with "PCI:1:0:0" 2004-09-26 04:41:45 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:41:45 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:41:45 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:41:45 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:41:45 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:41:45 PM-0400 auto_answer(): asking xserver-xfree86/config/device/use_fbdev 2004-09-26 04:41:45 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:41:45 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:41:45 PM-0400 auto_answer(): auto-answering with "xfree86" 2004-09-26 04:41:46 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:41:46 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:41:46 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:41:46 PM-0400 auto_answer(): auto-answering with "pc104" 2004-09-26 04:41:47 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:41:47 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:41:47 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:41:47 PM-0400 auto_answer(): auto-answering with "us" 2004-09-26 04:41:48 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:41:48 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:41:48 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:41:48 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:41:48 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:41:48 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_mouse 2004-09-26 04:41:52 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:41:53 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:41:53 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:41:53 PM-0400 auto_answer(): auto-answering with "/dev/psaux" 2004-09-26 04:41:53 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/mouse/port 2004-09-26 04:41:56 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:41:56 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:41:56 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:41:56 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "" 2004-09-26 04:41:56 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:41:56 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "" 2004-09-26 04:41:56 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:41:56 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "" 2004-09-26 04:41:56 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:41:56 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:41:56 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_monitor 2004-09-26 04:41:57 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:41:58 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:41:58 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:41:58 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:41:58 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:41:58 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:41:58 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:41:58 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:41:58 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:41:58 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:41:58 PM-0400 configure_monitor(): using "Advanced" selection method 2004-09-26 04:41:58 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/horiz-sync" with default "30-107" 2004-09-26 04:41:58 PM-0400 auto_answer(): auto-answering with "30-107" 2004-09-26 04:41:58 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/horiz-sync 2004-09-26 04:41:58 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/horiz-sync is now "30-107" 2004-09-26 04:41:58 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/vert-refresh" with default "50-150" 2004-09-26 04:41:58 PM-0400 auto_answer(): auto-answering with "50-150" 2004-09-26 04:41:58 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/vert-refresh 2004-09-26 04:41:58 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/vert-refresh is now "50-150" 2004-09-26 04:41:58 PM-0400 configure_monitor(): horizontal sync configured to "30-107" 2004-09-26 04:41:58 PM-0400 configure_monitor(): vertical refresh configured to "50-150" 2004-09-26 04:41:58 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:41:58 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:41:58 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:41:58 PM-0400 auto_answer(): auto-answering with "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:41:58 PM-0400 auto_answer(): asking xserver-xfree86/config/display/modes 2004-09-26 04:41:59 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:41:59 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:41:59 PM-0400 auto_answer(): auto-answering with "24" 2004-09-26 04:41:59 PM-0400 auto_answer(): asking xserver-xfree86/config/display/default_depth 2004-09-26 04:42:00 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:42:03 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:42:03 PM-0400 not configuring default X server; manual modifications have been made -- please see /usr/share/doc/xfree86-common/FAQ.gz or /usr/share/doc/xfree86-common/FAQ.xhtml.gz 2004-09-26 04:42:03 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:42:03 PM-0400 configure_video_device(): no video driver modules found in /usr/X11R6/lib/modules/drivers 2004-09-26 04:42:03 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:42:03 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:42:03 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:42:03 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "ati" 2004-09-26 04:42:03 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/driver per exit status of db_input 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:42:03 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:42:03 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:42:03 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:42:03 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:42:03 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:42:03 PM-0400 auto_answer(): running "validate_bus_id_db_input high xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:42:03 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "PCI:1:0:0" 2004-09-26 04:42:03 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:42:03 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:42:03 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:42:03 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "false" 2004-09-26 04:42:03 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/use_fbdev per exit status of db_input 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:42:03 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:42:03 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "xfree86" 2004-09-26 04:42:03 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:42:03 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:42:03 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "pc104" 2004-09-26 04:42:03 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:42:03 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:42:03 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "us" 2004-09-26 04:42:03 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:42:03 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:42:03 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:42:03 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:42:03 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_mouse per exit status of db_input 2004-09-26 04:42:03 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:42:04 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:42:04 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:42:04 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "/dev/input/mice" 2004-09-26 04:42:04 PM-0400 auto_answer(): not asking xserver-xfree86/config/inputdevice/mouse/port per exit status of db_input 2004-09-26 04:42:04 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:42:04 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:42:04 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:42:04 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "Nokia 446XproNOK" 2004-09-26 04:42:04 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:42:04 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "30-107" 2004-09-26 04:42:04 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:42:04 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "50-150" 2004-09-26 04:42:04 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:42:04 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:42:04 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_monitor per exit status of db_input 2004-09-26 04:42:04 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:42:04 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:42:04 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:42:04 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:42:04 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:42:04 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:42:04 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:42:04 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:42:04 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:42:04 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:42:04 PM-0400 configure_monitor(): using "Advanced" selection method 2004-09-26 04:42:04 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/horiz-sync" with default "30-107" 2004-09-26 04:42:04 PM-0400 auto_answer(): auto-answering with "30-107" 2004-09-26 04:42:04 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/horiz-sync 2004-09-26 04:42:04 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/horiz-sync is now "30-107" 2004-09-26 04:42:04 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/vert-refresh" with default "50-150" 2004-09-26 04:42:04 PM-0400 auto_answer(): auto-answering with "50-150" 2004-09-26 04:42:04 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/vert-refresh 2004-09-26 04:42:04 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/vert-refresh is now "50-150" 2004-09-26 04:42:04 PM-0400 configure_monitor(): horizontal sync configured to "30-107" 2004-09-26 04:42:04 PM-0400 configure_monitor(): vertical refresh configured to "50-150" 2004-09-26 04:42:04 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:42:04 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:04 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:04 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:04 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/modes per exit status of db_input 2004-09-26 04:42:04 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:04 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:42:04 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "24" 2004-09-26 04:42:04 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/default_depth per exit status of db_input 2004-09-26 04:42:04 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:42:07 PM-0400 select_default_x_server(): X server symlink exists and points to executable X server; capping X server question priority at medium 2004-09-26 04:42:07 PM-0400 select_default_x_server(): $owners does not equal $choices: "xserver-xfree86" != "" 2004-09-26 04:42:07 PM-0400 select_default_x_server(): $owners has only one value; shared/default-x-server will not be asked 2004-09-26 04:42:07 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_video_card" with default "true" 2004-09-26 04:42:07 PM-0400 auto_answer(): auto-answering with "true" 2004-09-26 04:42:07 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_video_card 2004-09-26 04:42:09 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_video_card is now "false" 2004-09-26 04:42:09 PM-0400 select_default_x_server(): user declined video card autodetection 2004-09-26 04:42:09 PM-0400 select_default_x_server(): seen flag of shared/default-x-server is false 2004-09-26 04:42:09 PM-0400 auto_answer(): running "db_input medium shared/default-x-server" with default "xserver-xfree86" 2004-09-26 04:42:09 PM-0400 auto_answer(): auto-answering with "xserver-xfree86" 2004-09-26 04:42:09 PM-0400 auto_answer(): not asking shared/default-x-server per exit status of db_input 2004-09-26 04:42:09 PM-0400 auto_answer(): value of shared/default-x-server is now "xserver-xfree86" 2004-09-26 04:42:09 PM-0400 select_default_x_server(): X server symlink exists and points to executable X server; capping X server question priority at medium 2004-09-26 04:42:09 PM-0400 select_default_x_server(): $owners has only one value; shared/default-x-server will not be asked 2004-09-26 04:42:09 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_video_card" with default "true" 2004-09-26 04:42:09 PM-0400 auto_answer(): auto-answering with "true" 2004-09-26 04:42:09 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_video_card 2004-09-26 04:42:09 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_video_card is now "false" 2004-09-26 04:42:09 PM-0400 select_default_x_server(): user declined video card autodetection 2004-09-26 04:42:09 PM-0400 select_default_x_server(): seen flag of shared/default-x-server is false 2004-09-26 04:42:09 PM-0400 auto_answer(): running "db_input medium shared/default-x-server" with default "xserver-xfree86" 2004-09-26 04:42:09 PM-0400 auto_answer(): auto-answering with "xserver-xfree86" 2004-09-26 04:42:09 PM-0400 auto_answer(): not asking shared/default-x-server per exit status of db_input 2004-09-26 04:42:09 PM-0400 auto_answer(): value of shared/default-x-server is now "xserver-xfree86" 2004-09-26 04:42:09 PM-0400 configure_xfree86_x_server(): /etc/X11/XF86Config-4 file exists; capping configuration question priority at medium 2004-09-26 04:42:09 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:42:10 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:42:10 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "ati" 2004-09-26 04:42:10 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/driver per exit status of db_input 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:42:10 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:42:10 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:42:10 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:42:10 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:42:10 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:42:10 PM-0400 auto_answer(): running "validate_bus_id_db_input medium xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "PCI:1:0:0" 2004-09-26 04:42:10 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:42:10 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:42:10 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "false" 2004-09-26 04:42:10 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/use_fbdev per exit status of db_input 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:42:10 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "xfree86" 2004-09-26 04:42:10 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:42:10 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "pc104" 2004-09-26 04:42:10 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:42:10 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "us" 2004-09-26 04:42:10 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:42:10 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:42:10 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:42:10 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_mouse per exit status of db_input 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:42:10 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:42:10 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "/dev/input/mice" 2004-09-26 04:42:10 PM-0400 auto_answer(): not asking xserver-xfree86/config/inputdevice/mouse/port per exit status of db_input 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:42:10 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:42:10 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:42:10 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "Nokia 446XproNOK" 2004-09-26 04:42:10 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:42:10 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "30-107" 2004-09-26 04:42:10 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:42:10 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "50-150" 2004-09-26 04:42:10 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:42:10 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:42:10 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_monitor per exit status of db_input 2004-09-26 04:42:10 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:42:11 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:42:11 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:42:11 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:42:11 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:42:11 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:42:11 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:42:11 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:42:11 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:42:11 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:42:11 PM-0400 configure_monitor(): using "Advanced" selection method 2004-09-26 04:42:11 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/horiz-sync" with default "30-107" 2004-09-26 04:42:11 PM-0400 auto_answer(): auto-answering with "30-107" 2004-09-26 04:42:11 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/horiz-sync 2004-09-26 04:42:11 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/horiz-sync is now "30-107" 2004-09-26 04:42:11 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/vert-refresh" with default "50-150" 2004-09-26 04:42:11 PM-0400 auto_answer(): auto-answering with "50-150" 2004-09-26 04:42:11 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/vert-refresh 2004-09-26 04:42:11 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/vert-refresh is now "50-150" 2004-09-26 04:42:11 PM-0400 configure_monitor(): horizontal sync configured to "30-107" 2004-09-26 04:42:11 PM-0400 configure_monitor(): vertical refresh configured to "50-150" 2004-09-26 04:42:11 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:42:11 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:11 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:11 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:11 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/modes per exit status of db_input 2004-09-26 04:42:11 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:42:11 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:42:11 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "24" 2004-09-26 04:42:11 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/default_depth per exit status of db_input 2004-09-26 04:42:11 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:54:25 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:54:25 PM-0400 not configuring default X server; manual modifications have been made -- please see /usr/share/doc/xfree86-common/FAQ.gz or /usr/share/doc/xfree86-common/FAQ.xhtml.gz 2004-09-26 04:54:25 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:54:25 PM-0400 configure_video_device(): no video driver modules found in /usr/X11R6/lib/modules/drivers 2004-09-26 04:54:25 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:54:25 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:54:25 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:54:25 PM-0400 auto_answer(): auto-answering with "vesa" 2004-09-26 04:54:25 PM-0400 auto_answer(): asking xserver-xfree86/config/device/driver 2004-09-26 04:54:28 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:54:28 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:54:28 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:54:28 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:54:28 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:54:28 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:54:28 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:54:29 PM-0400 auto_answer(): running "validate_bus_id_db_input high xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:54:29 PM-0400 auto_answer(): auto-answering with "PCI:1:0:0" 2004-09-26 04:54:30 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:54:30 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:54:30 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:54:30 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:54:30 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:54:30 PM-0400 auto_answer(): asking xserver-xfree86/config/device/use_fbdev 2004-09-26 04:54:31 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:54:31 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:54:31 PM-0400 auto_answer(): auto-answering with "xfree86" 2004-09-26 04:54:32 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:54:32 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:54:32 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:54:32 PM-0400 auto_answer(): auto-answering with "pc104" 2004-09-26 04:54:33 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:54:33 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:54:33 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:54:33 PM-0400 auto_answer(): auto-answering with "us" 2004-09-26 04:54:34 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:54:34 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:54:34 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:54:34 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:54:34 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:54:34 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_mouse 2004-09-26 04:54:35 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:54:35 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:54:35 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:54:35 PM-0400 auto_answer(): auto-answering with "/dev/psaux" 2004-09-26 04:54:35 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/mouse/port 2004-09-26 04:54:37 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:54:37 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:54:37 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:54:37 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "" 2004-09-26 04:54:37 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:54:37 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "" 2004-09-26 04:54:37 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:54:37 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "" 2004-09-26 04:54:37 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:54:37 PM-0400 auto_answer(): auto-answering with "false" 2004-09-26 04:54:37 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_monitor 2004-09-26 04:54:40 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:54:40 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:54:40 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:54:40 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:54:40 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:54:40 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:54:40 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:54:40 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:54:40 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:54:40 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:54:40 PM-0400 configure_monitor(): using "Advanced" selection method 2004-09-26 04:54:40 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/horiz-sync" with default "30-107" 2004-09-26 04:54:40 PM-0400 auto_answer(): auto-answering with "30-107" 2004-09-26 04:54:40 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/horiz-sync 2004-09-26 04:54:40 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/horiz-sync is now "30-107" 2004-09-26 04:54:40 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/vert-refresh" with default "50-150" 2004-09-26 04:54:40 PM-0400 auto_answer(): auto-answering with "50-150" 2004-09-26 04:54:40 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/vert-refresh 2004-09-26 04:54:40 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/vert-refresh is now "50-150" 2004-09-26 04:54:40 PM-0400 configure_monitor(): horizontal sync configured to "30-107" 2004-09-26 04:54:40 PM-0400 configure_monitor(): vertical refresh configured to "50-150" 2004-09-26 04:54:40 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:54:40 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:40 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:40 PM-0400 auto_answer(): auto-answering with "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:40 PM-0400 auto_answer(): asking xserver-xfree86/config/display/modes 2004-09-26 04:54:43 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:43 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:54:43 PM-0400 auto_answer(): auto-answering with "24" 2004-09-26 04:54:43 PM-0400 auto_answer(): asking xserver-xfree86/config/display/default_depth 2004-09-26 04:54:44 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:54:47 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:54:47 PM-0400 not configuring default X server; manual modifications have been made -- please see /usr/share/doc/xfree86-common/FAQ.gz or /usr/share/doc/xfree86-common/FAQ.xhtml.gz 2004-09-26 04:54:47 PM-0400 select_default_x_server(): no stored checksum available for /etc/X11/X 2004-09-26 04:54:47 PM-0400 configure_video_device(): no video driver modules found in /usr/X11R6/lib/modules/drivers 2004-09-26 04:54:47 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:54:47 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:54:47 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:54:47 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "ati" 2004-09-26 04:54:47 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/driver per exit status of db_input 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:54:47 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:54:47 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:54:47 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:54:47 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:54:47 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:54:47 PM-0400 auto_answer(): running "validate_bus_id_db_input high xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:54:47 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "PCI:1:0:0" 2004-09-26 04:54:47 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:54:47 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:54:47 PM-0400 auto_answer(): running "db_input high xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:54:47 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "false" 2004-09-26 04:54:47 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/use_fbdev per exit status of db_input 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:54:47 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:54:47 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "xfree86" 2004-09-26 04:54:47 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:54:47 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:54:47 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "pc104" 2004-09-26 04:54:47 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:54:47 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:54:47 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "us" 2004-09-26 04:54:47 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:54:47 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:54:47 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:54:47 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:54:47 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_mouse per exit status of db_input 2004-09-26 04:54:47 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:54:48 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:54:48 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:54:48 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "/dev/input/mice" 2004-09-26 04:54:48 PM-0400 auto_answer(): not asking xserver-xfree86/config/inputdevice/mouse/port per exit status of db_input 2004-09-26 04:54:48 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:54:48 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:54:48 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:54:48 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "Nokia 446XproNOK" 2004-09-26 04:54:48 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:54:48 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "30-107" 2004-09-26 04:54:48 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:54:48 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "50-150" 2004-09-26 04:54:48 PM-0400 auto_answer(): running "db_input high xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:54:48 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:54:48 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_monitor per exit status of db_input 2004-09-26 04:54:48 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:54:48 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:54:48 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:54:48 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:54:48 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:54:48 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:54:48 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:54:48 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:54:48 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:54:48 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:54:48 PM-0400 configure_monitor(): using "Advanced" selection method 2004-09-26 04:54:48 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/horiz-sync" with default "30-107" 2004-09-26 04:54:48 PM-0400 auto_answer(): auto-answering with "30-107" 2004-09-26 04:54:48 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/horiz-sync 2004-09-26 04:54:48 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/horiz-sync is now "30-107" 2004-09-26 04:54:48 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/vert-refresh" with default "50-150" 2004-09-26 04:54:48 PM-0400 auto_answer(): auto-answering with "50-150" 2004-09-26 04:54:48 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/vert-refresh 2004-09-26 04:54:48 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/vert-refresh is now "50-150" 2004-09-26 04:54:48 PM-0400 configure_monitor(): horizontal sync configured to "30-107" 2004-09-26 04:54:48 PM-0400 configure_monitor(): vertical refresh configured to "50-150" 2004-09-26 04:54:48 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:54:48 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:48 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:48 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:48 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/modes per exit status of db_input 2004-09-26 04:54:48 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:54:48 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:54:48 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "24" 2004-09-26 04:54:48 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/default_depth per exit status of db_input 2004-09-26 04:54:48 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24" 2004-09-26 04:54:51 PM-0400 select_default_x_server(): X server symlink exists and points to executable X server; capping X server question priority at medium 2004-09-26 04:54:51 PM-0400 select_default_x_server(): $owners does not equal $choices: "xserver-xfree86" != "" 2004-09-26 04:54:51 PM-0400 select_default_x_server(): $owners has only one value; shared/default-x-server will not be asked 2004-09-26 04:54:51 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_video_card" with default "true" 2004-09-26 04:54:51 PM-0400 auto_answer(): auto-answering with "true" 2004-09-26 04:54:51 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_video_card 2004-09-26 04:55:12 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_video_card is now "false" 2004-09-26 04:55:12 PM-0400 select_default_x_server(): user declined video card autodetection 2004-09-26 04:55:12 PM-0400 select_default_x_server(): seen flag of shared/default-x-server is false 2004-09-26 04:55:12 PM-0400 auto_answer(): running "db_input medium shared/default-x-server" with default "xserver-xfree86" 2004-09-26 04:55:12 PM-0400 auto_answer(): auto-answering with "xserver-xfree86" 2004-09-26 04:55:12 PM-0400 auto_answer(): not asking shared/default-x-server per exit status of db_input 2004-09-26 04:55:12 PM-0400 auto_answer(): value of shared/default-x-server is now "xserver-xfree86" 2004-09-26 04:55:12 PM-0400 select_default_x_server(): X server symlink exists and points to executable X server; capping X server question priority at medium 2004-09-26 04:55:12 PM-0400 select_default_x_server(): $owners has only one value; shared/default-x-server will not be asked 2004-09-26 04:55:12 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_video_card" with default "true" 2004-09-26 04:55:12 PM-0400 auto_answer(): auto-answering with "true" 2004-09-26 04:55:12 PM-0400 auto_answer(): asking xserver-xfree86/autodetect_video_card 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_video_card is now "false" 2004-09-26 04:55:13 PM-0400 select_default_x_server(): user declined video card autodetection 2004-09-26 04:55:13 PM-0400 select_default_x_server(): seen flag of shared/default-x-server is false 2004-09-26 04:55:13 PM-0400 auto_answer(): running "db_input medium shared/default-x-server" with default "xserver-xfree86" 2004-09-26 04:55:13 PM-0400 auto_answer(): auto-answering with "xserver-xfree86" 2004-09-26 04:55:13 PM-0400 auto_answer(): not asking shared/default-x-server per exit status of db_input 2004-09-26 04:55:13 PM-0400 auto_answer(): value of shared/default-x-server is now "xserver-xfree86" 2004-09-26 04:55:13 PM-0400 configure_xfree86_x_server(): /etc/X11/XF86Config-4 file exists; capping configuration question priority at medium 2004-09-26 04:55:13 PM-0400 configure_video_device(): available video driver list set to "apm, ark, ati, chips, cirrus, cyrix, fbdev, glide, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, rendition, s3, s3virge, savage, siliconmotion, sis, tdfx, tga, trident, tseng, vesa, vga, via, vmware" 2004-09-26 04:55:13 PM-0400 configure_video_device(): user declined video card autodetection 2004-09-26 04:55:13 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/device/driver" with default "vesa" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "ati" 2004-09-26 04:55:13 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/driver per exit status of db_input 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/device/driver is now "ati" 2004-09-26 04:55:13 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/device/identifier" with default "Generic Video Card" 2004-09-26 04:55:13 PM-0400 auto_answer(): auto-answering with "Generic Video Card" 2004-09-26 04:55:13 PM-0400 auto_answer(): asking xserver-xfree86/config/device/identifier 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/device/identifier is now "Generic Video Card" 2004-09-26 04:55:13 PM-0400 configure_video_device(): multihead system detected; setting BusID question priority to high 2004-09-26 04:55:13 PM-0400 PCI:1:0:0 0300: 1002:4152 2004-09-26 04:55:13 PM-0400 auto_answer(): running "validate_bus_id_db_input medium xserver-xfree86/config/device/bus_id" with default "PCI:1:0:0" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "PCI:1:0:0" 2004-09-26 04:55:13 PM-0400 auto_answer(): asking xserver-xfree86/config/device/bus_id 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/device/bus_id is now "PCI:1:0:0" 2004-09-26 04:55:13 PM-0400 configure_video_device(): /proc/fb reports framebuffer type "" 2004-09-26 04:55:13 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/device/use_fbdev" with default "false" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "false" 2004-09-26 04:55:13 PM-0400 auto_answer(): not asking xserver-xfree86/config/device/use_fbdev per exit status of db_input 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/device/use_fbdev is now "false" 2004-09-26 04:55:13 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/rules" with default "xfree86" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "xfree86" 2004-09-26 04:55:13 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/rules 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/rules is now "xfree86" 2004-09-26 04:55:13 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/model" with default "pc104" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "pc104" 2004-09-26 04:55:13 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/model 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/model is now "pc104" 2004-09-26 04:55:13 PM-0400 auto_answer(): running "validate_string_db_input medium xserver-xfree86/config/inputdevice/keyboard/layout" with default "us" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "us" 2004-09-26 04:55:13 PM-0400 auto_answer(): asking xserver-xfree86/config/inputdevice/keyboard/layout 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/keyboard/layout is now "us" 2004-09-26 04:55:13 PM-0400 configure_mouse(): devfs does not appear to be in use 2004-09-26 04:55:13 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_mouse" with default "false" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:55:13 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_mouse per exit status of db_input 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_mouse is now "true" 2004-09-26 04:55:13 PM-0400 configure_mouse(): mdetect returned port "/dev/psaux"; protocol "ImPS/2" 2004-09-26 04:55:13 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/inputdevice/mouse/port" with default "/dev/psaux" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "/dev/input/mice" 2004-09-26 04:55:13 PM-0400 auto_answer(): not asking xserver-xfree86/config/inputdevice/mouse/port per exit status of db_input 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/config/inputdevice/mouse/port is now "/dev/input/mice" 2004-09-26 04:55:13 PM-0400 configure_mouse(): $mouse_protocol_choices has only one value; setting xserver-xfree86/config/inputdevice/mouse/protocol to "ImPS/2" 2004-09-26 04:55:13 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier has not been seen 2004-09-26 04:55:13 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/identifier is already set to "Nokia 446XproNOK" 2004-09-26 04:55:13 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync has not been seen 2004-09-26 04:55:13 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/horiz-sync is already set to "30-107" 2004-09-26 04:55:13 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh has not been seen 2004-09-26 04:55:13 PM-0400 configure_monitor(): xserver-xfree86/config/monitor/vert-refresh is already set to "50-150" 2004-09-26 04:55:13 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/autodetect_monitor" with default "false" 2004-09-26 04:55:13 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "true" 2004-09-26 04:55:13 PM-0400 auto_answer(): not asking xserver-xfree86/autodetect_monitor per exit status of db_input 2004-09-26 04:55:13 PM-0400 auto_answer(): value of xserver-xfree86/autodetect_monitor is now "true" 2004-09-26 04:55:14 PM-0400 configure_monitor(): get-edid reports monitor identifier of "Nokia 446XproNOK" 2004-09-26 04:55:14 PM-0400 configure_monitor(): get-edid reports horizonal sync of "30-107" 2004-09-26 04:55:14 PM-0400 configure_monitor(): get-edid reports vertical refresh of "50-150" 2004-09-26 04:55:14 PM-0400 auto_answer(): running "validate_string_db_input low xserver-xfree86/config/monitor/identifier" with default "Nokia 446XproNOK" 2004-09-26 04:55:14 PM-0400 auto_answer(): auto-answering with "Nokia 446XproNOK" 2004-09-26 04:55:14 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/identifier 2004-09-26 04:55:14 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/identifier is now "Nokia 446XproNOK" 2004-09-26 04:55:14 PM-0400 configure_monitor(): $edid_horiz_sync: "30-107"; $edid_vert_refresh: "50-150"; setting question priority to low 2004-09-26 04:55:14 PM-0400 configure_monitor(): question priority for monitor selection method and related questions is low 2004-09-26 04:55:14 PM-0400 configure_monitor(): using "Advanced" selection method 2004-09-26 04:55:14 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/horiz-sync" with default "30-107" 2004-09-26 04:55:14 PM-0400 auto_answer(): auto-answering with "30-107" 2004-09-26 04:55:14 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/horiz-sync 2004-09-26 04:55:14 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/horiz-sync is now "30-107" 2004-09-26 04:55:14 PM-0400 auto_answer(): running "validate_monitor_frequency_db_input low xserver-xfree86/config/monitor/vert-refresh" with default "50-150" 2004-09-26 04:55:14 PM-0400 auto_answer(): auto-answering with "50-150" 2004-09-26 04:55:14 PM-0400 auto_answer(): asking xserver-xfree86/config/monitor/vert-refresh 2004-09-26 04:55:14 PM-0400 auto_answer(): value of xserver-xfree86/config/monitor/vert-refresh is now "50-150" 2004-09-26 04:55:14 PM-0400 configure_monitor(): horizontal sync configured to "30-107" 2004-09-26 04:55:14 PM-0400 configure_monitor(): vertical refresh configured to "50-150" 2004-09-26 04:55:14 PM-0400 configure_display_modes_and_depth(): "xserver-xfree86/config/device/driver" is "ati" 2004-09-26 04:55:14 PM-0400 configure_display_modes_and_depth(): default color depth is 24 and default video modes are "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:55:14 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/modes" with default "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:55:14 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:55:14 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/modes per exit status of db_input 2004-09-26 04:55:14 PM-0400 auto_answer(): value of xserver-xfree86/config/display/modes is now "1152x864, 1024x768, 800x600, 640x480" 2004-09-26 04:55:14 PM-0400 auto_answer(): running "db_input medium xserver-xfree86/config/display/default_depth" with default "24" 2004-09-26 04:55:14 PM-0400 auto_answer(): (not reconfiguring) preserving existing answer "24" 2004-09-26 04:55:14 PM-0400 auto_answer(): not asking xserver-xfree86/config/display/default_depth per exit status of db_input 2004-09-26 04:55:14 PM-0400 auto_answer(): value of xserver-xfree86/config/display/default_depth is now "24"
