Package: xserver-xfree86 Version: 4.3.0.dfsg.1-6 Severity: wishlist Hello
On my Radeon 9200 board, I've noticed that the VGA signal quality is better on the VGA output than on the DVI output (probably due to a bad quality DVI to VGA converter): I have a lot of analog ringing which are too visible on my computer screen (1280x1200). I also have connected a video projector on the DVI head. At 800x600, the ringing is less visible. When I set up a dual head configuration, display :0.0 is set to DVI head (e.g. videp projector) and the display :0.1 is set to the computer screen (which is correct behavior according to the radeon man page). Unfortunately, this means that the kdm login prompt appears on the projector screen. This is litterally a pain in the neck since the login prompt is projected behind me ;-) So, my wish, is to be able to swap the primary/secondary head in the XFConfig file. (An option like SwapPrimarySecondary would be fine) Note: MergedFB resolves the kdm login problem, but using xinerama in a configuration where you have a computer screen and a video projector (which is not always turned on) is really painful. For instance, with Windowmaker, all icons on the right are placed on the video projector. And menus can unfold from one screen to the other one projected at my back. Thanks -- Package-specific info: -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.7-1-k7 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] Versions of packages xserver-xfree86 depends on: ii debconf [debconf-2.0] 1.4.30 Debian configuration management sy ii libc6 2.3.2.ds1-14 GNU C Library: Shared libraries an ii xserver-common 4.3.0.dfsg.1-6 files and utilities common to all ii zlib1g 1:1.2.1.1-5 compression library - runtime -- debconf information: xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm) * xserver-xfree86/config/device/use_fbdev: false * xserver-xfree86/config/monitor/selection-method: Advanced xserver-xfree86/config/doublequote_in_string_error: * xserver-xfree86/config/device/bus_id: * xserver-xfree86/config/device/video_ram: * xserver-xfree86/config/monitor/lcd: true xserver-xfree86/config/inputdevice/keyboard/internal: * xserver-xfree86/config/device/driver: ati * xserver-xfree86/config/monitor/vert-refresh: 50-75 * xserver-xfree86/config/display/default_depth: 24 * xserver-xfree86/config/display/modes: 1280x1024, 1024x768, 800x600, 640x480 * xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, record, speedo, type1, vbe xserver-xfree86/config/monitor/range_input_error: * xserver-xfree86/autodetect_video_card: true * xserver-xfree86/config/inputdevice/keyboard/variant: * xserver-xfree86/config/inputdevice/mouse/port: /dev/psaux * xserver-xfree86/config/write_files_section: true xserver-xfree86/autodetect_monitor: true * xserver-xfree86/config/device/identifier: ATI Technologies, Inc. Radeon RV280 [Radeon 9200] shared/default-x-server: xserver-xfree86 * xserver-xfree86/config/inputdevice/mouse/emulate3buttons: false * xserver-xfree86/config/inputdevice/keyboard/layout: us * xserver-xfree86/config/monitor/horiz-sync: 30-80 * xserver-xfree86/config/monitor/identifier: Hercules 920Pro shared/no_known_x-server: xserver-xfree86/autodetect_mouse: true * xserver-xfree86/config/monitor/mode-list: 1152x864 @ 75Hz * xserver-xfree86/config/inputdevice/keyboard/rules: xfree86 xserver-xfree86/multiple_possible_x-drivers: * xserver-xfree86/config/inputdevice/keyboard/model: pc104 * xserver-xfree86/config/write_dri_section: true * xserver-xfree86/config/inputdevice/mouse/zaxismapping: true xserver-xfree86/config/device/bus_id_error: * xserver-xfree86/config/inputdevice/keyboard/options: altwin:meta_win xserver-xfree86/config/nonnumeric_string_error: * xserver-xfree86/config/inputdevice/mouse/protocol: ImPS/2 shared/multiple_possible_x-servers: xserver-xfree86/config/null_string_error:
