Here it is.  I see the correct ranges in the output below.  When
Debian Installer beta 4 is released, I'll probably do a reinstall from
scratch and see what happens.

For kicks, I just moved my /etc/X11/XF86Config-4 out of the way, ran
dpkg-reconfigure xserver-xfree86 in high priority mode accepting
defaults (where the system did actually believe that 1280x1024 at 85
Hz was my best mode) and then reran dexconfig.  I got the same default
values as reported in my original bug report, not the values detected
below.  I don't know whether that information is useful to you.

My system is very current -- my last apt-get dist-upgrade was on April
18.

-- 
Jay Berkenbilt <[EMAIL PROTECTED]>
http://www.ql.org/q/

--------------------------------------

get-edid: get-edid version 1.4.1

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
        Function supported
        Call successful

        VBE version 200
        VBE string at 0x11110 "ATI MACH64"

VBE/DDC service about to be called
        Report DDC capabilities

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
        Function supported
        Call successful

        Monitor and video card combination does not support DDC1 transfers
        Monitor and video card combination supports DDC2 transfers
        0 seconds per 128 byte EDID block transfer
        Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
        Read EDID

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
parse-edid: parse-edid version 1.4.1
        Function supported
        Call successful

parse-edid: EDID checksum passed.

        # EDID version 1 revision 2
Section "Monitor"
        # Block type: 2:0 3:fd
        # Block type: 2:0 3:ff
        # Block type: 2:0 3:fc
        Identifier "Nokia 446XproNOK"
        VendorName "NOK"
        ModelName "Nokia 446XproNOK"
        # Block type: 2:0 3:fd
        HorizSync 30-107
        VertRefresh 50-150
        # Max dot clock not given
        # Block type: 2:0 3:ff
        # Block type: 2:0 3:fc
        # DPMS capabilities: Active off:yes  Suspend:yes  Standby:yes

        Mode    "1600x1200"     # vfreq 85.000Hz, hfreq 106.250kHz
                DotClock        229.500000
                HTimings        1600 1664 1856 2160
                VTimings        1200 1201 1204 1250
                Flags   "+HSync" "+VSync"
        EndMode
        # Block type: 2:0 3:fd
        # Block type: 2:0 3:ff
        # Block type: 2:0 3:fc
EndSection

--------------------------------------

Reply via email to