Hi,
I have a computer that has integrated video using the i815 chipset (or
at least, that what the kernel/X says). This works fine with xfree86
at 1024x768 resolution, but 1280x1024 resolution yields a glitchy
display -- basically everything looks right, but there are about 10
thin shimmery vertical lines spaced evenly across the screen.
Looking at the X output log, the only thing that seem fishy (to me) is
this (see later for a fuller log):
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(WW) I810(0): xf86BindGARTMemory: binding of gart memory with key 1
at offset 0x4000000 failed (Invalid argument)
(II) I810(0): Allocation of 4096 bytes for HW cursor failed
Googling reveals plenty of people with a similar problem, but none of
the solutions offered seem to work for me; in particular:
(1) My kernel has the agpgart driver, and the device has reasonable
permissions:
$ uname -rs
Linux 2.4.21
$ dmesg | grep -i 'agp\|drm'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 0
$ ls -l /dev/agpgart
crw-rw-rw- 1 root 10, 175 2002-01-22 19:10 /dev/agpgart
(2) My BIOS seems reasonably set up -- at least the only video setup
stuff it has says `AGP' and `64MB aperture'.
(3) I followed the recommendation somewhere to put `VideoRAm 65536'
in XF86Config-4, but that makes no difference.
I'm using xserver-xfree86 4.2.1-11 from debian unstable; the computer
is an NEC Mate MA10T.
Does anybody have any suggestions for debugging this?
Thanks,
XFree86.0.log:
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.2.1.1 (Debian 4.2.1-11 20030829103906 [EMAIL PROTECTED]) / X
Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.21-rc1-ac1-cryptoloop i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 4 11:46:41 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "LCD Screen" (0)
(**) | |-->Monitor "LCD Monitor"
(**) | |-->Device "i815"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Serial Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/lib/X11/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/lib/X11/fonts/100dpi").
(**) FontPath set to
"unix/:7100,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000f940, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,1132 card 1033,8122 rev 04 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 11 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1033,8160 rev 11 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 1033,8160 rev 11 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1033,8160 rev 11 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 1033,8160 rev 11 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 1033,8116 rev 11 class 04,01,00 hdr 00
(II) PCI: 02:0f:0: chip 8086,1229 card 8086,000d rev 08 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x04 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf4100000 - 0xf42fffff (0x200000) MX[B]
(II) Bus 2 prefetchable memory range:
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:2:0) Intel i815 rev 4, Mem @ 0xf8000000/26, 0xf4000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
[1] -1 0 0xf4200000 - 0xf4200fff (0x1000) MX[B]
[2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0 0x00002000 - 0x0000203f (0x40) IX[B]
[5] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]
[6] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[7] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[8] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]
[9] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[10] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
[1] -1 0 0xf4200000 - 0xf4200fff (0x1000) MX[B]
[2] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0 0x00002000 - 0x0000203f (0x40) IX[B]
[5] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]
[6] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[7] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[8] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]
[9] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[10] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
[6] -1 0 0xf4200000 - 0xf4200fff (0x1000) MX[B]
[7] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B]
[12] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]
[13] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[14] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[15] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]
[16] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[17] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:debug_xform.o": No
symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols
found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815,
i830M
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset i815 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
[6] -1 0 0xf4200000 - 0xf4200fff (0x1000) MX[B]
[7] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00002000 - 0x0000203f (0x40) IX[B]
[12] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]
[13] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[14] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[15] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]
[16] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[17] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
[6] -1 0 0xf4200000 - 0xf4200fff (0x1000) MX[B]
[7] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00002000 - 0x0000203f (0x40) IX[B]
[15] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[17] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[18] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]
[19] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[20] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 815 Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 34.86
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 815 Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level none
(II) I810(0): VESA VBE DDC transfer in appr. 0 sec.
(II) I810(0): VESA VBE DDC read failed
(--) I810(0): Chipset: "i815"
(--) I810(0): Linear framebuffer at 0xF8000000
(--) I810(0): IO registers at addr 0xF4000000
(II) I810(0): I810CheckAvailableMemory: 206844k available
(**) I810(0): Will alloc AGP framebuffer: 65536 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): LCD Monitor: Using hsync value of 64.00 kHz
(II) I810(0): LCD Monitor: Using vrefresh value of 60.00 Hz
(II) I810(0): Clock range: 12.00 to 136.00 MHz
(II) I810(0): Not using default mode "640x350" (hsync out of range)
(II) I810(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x400" (hsync out of range)
(II) I810(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "720x400" (hsync out of range)
(II) I810(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (hsync out of range)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (hsync out of range)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (hsync out of range)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (hsync out of range)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (hsync out of range)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (hsync out of range)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (hsync out of range)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (hsync out of range)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (hsync out of range)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "832x624" (hsync out of range)
(II) I810(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x768" (hsync out of range)
(II) I810(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028
1066 +hsync +vsync
(**) I810(0): Display dimensions: (337, 270) mm
(**) I810(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf4000000 - 0xf407ffff (0x80000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
[8] -1 0 0xf4200000 - 0xf4200fff (0x1000) MX[B]
[9] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[10] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x00002000 - 0x0000203f (0x40) IX[B]
[17] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]
[18] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[19] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[20] -1 0 0x00001850 - 0x0000185f (0x10) IX[B]
[21] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[22] -1 0 0x00001840 - 0x0000184f (0x10) IX[B]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) I810(0): Write-combining range (0xf8000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) I810(0): chose watermark 0x22418000: (tab.freq 108.0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(WW) I810(0): xf86BindGARTMemory: binding of gart memory with key 1
at offset 0x4000000 failed (Invalid argument)
(II) I810(0): Allocation of 4096 bytes for HW cursor failed
(II) I810(0): Adding 256 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(EE) I810(0): Hardware cursor initialization failed
(**) Option "dpms"
(**) I810(0): DPMS enabled
(==) I810(0): Direct rendering disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Serial Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Serial Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Serial Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Serial Mouse: ZAxisMapping: buttons 4 and 5
(**) Serial Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Serial Mouse" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
XF86Config-4:
# XF86Config-4 (XFree86 X server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "Monitor"
Identifier "Multiscan 17se II"
HorizSync 30-60
VertRefresh 50-75
Option "DPMS"
DisplaySize 315 235
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "i815"
Driver "i810"
VideoRam 65536
EndSection
# Section "Monitor"
# Identifier "Generic Monitor"
# HorizSync 30-60
# VertRefresh 50-75
# Option "DPMS"
# DisplaySize 315 235
# EndSection
# Section "Screen"
# Identifier "Default Screen"
# Device "i815"
# Monitor "Multiscan 17se II"
# DefaultDepth 24
# SubSection "Display"
# Depth 1
# Modes "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 4
# Modes "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 8
# Modes "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 15
# Modes "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 16
# Modes "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 24
# Modes "1024x768"
# EndSubSection
# EndSection
# Section "ServerLayout"
# Identifier "Default Layout"
# Screen "Default Screen"
# InputDevice "Generic Keyboard"
# InputDevice "Serial Mouse"
# EndSection
Section "Monitor"
Identifier "LCD Monitor"
HorizSync 64
VertRefresh 60
Option "DPMS"
DisplaySize 337 270
EndSection
Section "Screen"
Identifier "LCD Screen"
Device "i815"
Monitor "LCD Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "LCD Screen"
InputDevice "Generic Keyboard"
InputDevice "Serial Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
dmesg output:
Linux version 2.4.21 ([EMAIL PROTECTED]) (gcc version 3.3.2 20030831 (Debian
prerelease)) #1 Thu Sep 4 11:30:29 JST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fe70000 (usable)
BIOS-e820: 000000000fe70000 - 000000000fe7fc00 (ACPI data)
BIOS-e820: 000000000fe7fc00 - 000000000fe80000 (ACPI NVS)
BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
254MB LOWMEM available.
On node 0 totalpages: 65136
zone(0): 4096 pages.
zone(1): 61040 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 1002.297 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1998.84 BogoMIPS
Memory: 255016k/260544k available (1502k kernel code, 5140k reserved, 365k
data, 248k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdcbc, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Intel(R) PRO/100 Network Driver - version 2.2.21-k1
Copyright (c) 2003 Intel Corporation
PCI: Found IRQ 10 for device 02:0f.0
PCI: Sharing IRQ 10 with 00:02.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
PPP generic driver version 2.4.2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 17
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio
hda: SAMSUNG SV4002H, ATA DISK drive
blk: queue c0338ee0, I/O limit 4095Mb (mask 0xffffffff)
hdc: MATSHITA CR-177, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78242976 sectors (40060 MB) w/1945KiB Cache, CHS=77622/16/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: [PTBL] [4870/255/63] hda1 hda2 hda3
Intel 810 + AC97 Audio, version 0.24, 11:32:16 Sep 4 2003
PCI: Found IRQ 5 for device 00:1f.5
PCI: Sharing IRQ 5 with 00:1f.3
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0x1800 and 0x1400, MEM 0x0000 and 0x0000, IRQ 5
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: YMH0 (Unknown)
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 9 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
host/uhci.c: USB UHCI at I/O 0x1860, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
host/uhci.c: USB UHCI at I/O 0x1880, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 248k freed
Adding Swap: 393584k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e100: eth0 NIC Link is Up 100 Mbps Half duplex
memory : ce867660
memory : 00000000
memory : ce8676e0
--
We live, as we dream -- alone....
