Package: x11-xserver-utils
Version: 7.7+10+b1
Severity: normal
X-Debbugs-Cc: jean-m...@spaggiari.org
When connecting my laptop to an external hub with 2 screens, I'm getting
the following xrandr output:
DP-3-2 disconnected 3414x1920+0+240 (normal left inverted right x axis y
axis) 0mm x 0mm
3840x2160 (0xec) 519.940MHz +HSync -VSync
h: width 3840 start 3864 end 3880 total 3900 skew 0 clock
133.32KHz
v: height 2160 start 2163 end 2168 total 2222 clock
60.00Hz
DP-3-2 is the right ID but it shows as disconnected. It is also showing
only a single screen.
After a computer restart, everything is showing correctly. Also, when
running xrandr on the command line, the entire screen is freezing for a few
seconds. This is causing issues to xfc4-display-setting to work correctly.
Here are the outputs.
With 3 screens, 2 on the hub + laptop, before restart:
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384
eDP-1 connected primary 2880x1800+0+0 (normal left inverted right x axis y
axis) 302mm x 189mm
2880x1800 90.00*+ 60.00
2880x1620 59.96 59.97
2560x1600 59.99 59.97
2560x1440 59.99 59.99 59.96 59.95
...
320x200 85.27
320x180 59.84 59.32
320x175 85.27
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-3-1 disconnected (normal left inverted right x axis y axis)
DP-3-1-1 disconnected 3840x2160+0+0 (normal left inverted right x axis y
axis) 0mm x 0mm
DP-3-2 disconnected 3414x1920+0+240 (normal left inverted right x axis y
axis) 0mm x 0mm
3840x2160 (0xec) 519.940MHz +HSync -VSync
h: width 3840 start 3864 end 3880 total 3900 skew 0 clock
133.32KHz
v: height 2160 start 2163 end 2168 total 2222 clock
60.00Hz
With 3 screens again, but after restart:
$ xrandr -q
Screen 0: minimum 320 x 200, current 7253 x 3960, maximum 16384 x 16384
eDP-1 connected primary 2880x1800+533+2160 (normal left inverted right x
axis y axis) 302mm x 189mm
2880x1800 90.00*+ 60.00
2880x1620 59.96 59.97
2560x1600 59.99 59.97
2560x1440 59.99 59.99 59.96 59.95
2048x1536 85.00 75.00 60.00
...
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-3-1 disconnected (normal left inverted right x axis y axis)
DP-3-1-1 connected 3840x2160+3413+0 (normal left inverted right x axis y
axis) 697mm x 392mm
3840x2160 60.00*+ 30.00 29.97
2560x1440 59.95
1920x1080 60.00 59.94
...
800x600 72.19 75.00 60.32 56.25
640x480 75.00 72.81 66.67 60.00 59.94
720x400 70.08
DP-3-2 connected 3414x1920+0+240 (normal left inverted right x axis y axis)
597mm x 336mm
2560x1440 59.95*+
1920x1080 60.00 50.00 59.94 24.00 23.98
1680x1050 59.88
1600x900 60.00
...
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
-- System Information:
Debian Release: trixie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 6.12.6-amd64 (SMP w/12 CPU threads; PREEMPT)
Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8),
LANGUAGE=fr_CA:fr
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages x11-xserver-utils depends on:
ii cpp 4:14.2.0-1
ii libc6 2.40-4
ii libice6 2:1.1.1-1
ii libx11-6 2:1.8.10-2
ii libxaw7 2:1.0.16-1
ii libxcursor1 1:1.2.2-1+b1
ii libxext6 2:1.3.4-1+b3
ii libxi6 2:1.8.2-1
ii libxmu6 2:1.1.3-3+b4
ii libxmuu1 2:1.1.3-3+b4
ii libxrandr2 2:1.5.4-1+b2
ii libxt6t64 1:1.2.1-1.2+b2
ii libxxf86vm1 1:1.1.4-1+b4
x11-xserver-utils recommends no packages.
Versions of packages x11-xserver-utils suggests:
pn cairo-5c <none>
pn nickle <none>
ii xorg-docs-core 1:1.7.1-1.2
-- no debconf information
