Package: libgl1-mesa-dri Followup-For: Bug #949980 This bug is still present with the libgl1-mesa-dri in unstable (currently 19.3.3-1), but upgrading the following set of packages to the version in experimental (currently 20.0.0-1) fixes it for me:
libegl-mesa0 libgbm1 libgl1-mesa-dri libglapi-mesa libglx-mesa0 mesa-va-drivers mesa-vdpau-drivers mesa-vulkan-drivers -- Package-specific info: glxinfo: -------- glxinfo is not available (missing mesa-utils package). /etc/X11/X does not exist. /etc/X11/X is not a symlink. /etc/X11/X is not executable. The lspci command was not found; not including PCI data. /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: --------------------------------- total 0 /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 5.5.0-1-pinebookpro-arm64 (abuild@obs-arm-9) (gcc version 9.2.1 20200224 (Debian 9.2.1-30)) #1 SMP PREEMPT Sun Mar 1 05:19:55 UTC 2020 Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 36000 Mar 4 15:44 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 12.158] X.Org X Server 1.20.7 X Protocol Version 11, Revision 0 [ 12.158] Build Operating System: Linux 4.19.0-6-arm64 aarch64 Debian [ 12.158] Current Operating System: Linux torrey 5.5.0-1-pinebookpro-arm64 #1 SMP PREEMPT Sun Mar 1 05:19:55 UTC 2020 aarch64 [ 12.158] Kernel command line: root=PARTLABEL=mmcblk0-RootFS console=ttyS2,1500000n8 console=tty0 ro quiet splash plymouth.ignore-serial-consoles maxcpus=4 coherent_pool=1M earlycon=uart8250,mmio32,0xff1a0000 mem_sleep_default=s2idle [ 12.158] Build Date: 05 February 2020 04:27:36PM [ 12.158] xorg-server 2:1.20.7-3 (https://www.debian.org/support) [ 12.158] Current version of pixman: 0.36.0 [ 12.158] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.158] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.159] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 4 14:02:25 2020 [ 12.171] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.174] (==) No Layout section. Using the first Screen section. [ 12.175] (==) No screen section available. Using defaults. [ 12.175] (**) |-->Screen "Default Screen Section" (0) [ 12.175] (**) | |-->Monitor "<default monitor>" [ 12.176] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 12.176] (==) Automatically adding devices [ 12.177] (==) Automatically enabling devices [ 12.177] (==) Automatically adding GPU devices [ 12.177] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 12.182] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 12.183] Entry deleted from font path. [ 12.189] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 12.189] (==) ModulePath set to "/usr/lib/xorg/modules" [ 12.189] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12.189] (II) Loader magic: 0xaaaabb81ce10 [ 12.189] (II) Module ABI versions: [ 12.189] X.Org ANSI C Emulation: 0.4 [ 12.189] X.Org Video Driver: 24.1 [ 12.189] X.Org XInput driver : 24.1 [ 12.189] X.Org Server Extension : 10.0 [ 12.194] (++) using VT number 7 [ 12.194] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 12.199] (II) xfree86: Adding drm device (/dev/dri/card0) [ 12.207] (II) xfree86: Adding drm device (/dev/dri/card1) [ 12.207] (II) no primary bus or device found [ 12.207] falling back to /sys/devices/platform/display-subsystem/drm/card0 [ 12.207] (II) LoadModule: "glx" [ 12.211] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.257] (II) Module glx: vendor="X.Org Foundation" [ 12.257] compiled for 1.20.7, module version = 1.0.0 [ 12.257] ABI class: X.Org Server Extension, version 10.0 [ 12.258] (==) Matched modesetting as autoconfigured driver 0 [ 12.258] (==) Matched fbdev as autoconfigured driver 1 [ 12.258] (==) Assigned the driver to the xf86ConfigLayout [ 12.258] (II) LoadModule: "modesetting" [ 12.259] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 12.264] (II) Module modesetting: vendor="X.Org Foundation" [ 12.264] compiled for 1.20.7, module version = 1.20.7 [ 12.264] Module class: X.Org Video Driver [ 12.264] ABI class: X.Org Video Driver, version 24.1 [ 12.264] (II) LoadModule: "fbdev" [ 12.265] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 12.267] (II) Module fbdev: vendor="X.Org Foundation" [ 12.267] compiled for 1.20.0, module version = 0.5.0 [ 12.267] Module class: X.Org Video Driver [ 12.267] ABI class: X.Org Video Driver, version 24.0 [ 12.267] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 12.267] (II) FBDEV: driver for framebuffer: fbdev [ 12.323] (II) modeset(0): using drv /dev/dri/card0 [ 12.323] (WW) Falling back to old probe method for fbdev [ 12.323] (II) Loading sub module "fbdevhw" [ 12.323] (II) LoadModule: "fbdevhw" [ 12.324] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 12.327] (II) Module fbdevhw: vendor="X.Org Foundation" [ 12.327] compiled for 1.20.7, module version = 0.0.2 [ 12.327] ABI class: X.Org Video Driver, version 24.1 [ 12.328] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 12.328] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 12.328] (==) modeset(0): RGB weight 888 [ 12.328] (==) modeset(0): Default visual is TrueColor [ 12.328] (II) Loading sub module "glamoregl" [ 12.328] (II) LoadModule: "glamoregl" [ 12.329] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 12.372] (II) Module glamoregl: vendor="X.Org Foundation" [ 12.372] compiled for 1.20.7, module version = 1.0.1 [ 12.372] ABI class: X.Org ANSI C Emulation, version 0.4 [ 14.108] (II) modeset(0): glamor X acceleration enabled on Mali T860 (Panfrost) [ 14.108] (II) modeset(0): glamor initialized [ 14.109] (II) modeset(0): Output eDP-1 has no monitor section [ 14.109] (II) modeset(0): Output DP-1 has no monitor section [ 14.109] (II) modeset(0): EDID for output eDP-1 [ 14.110] (II) modeset(0): Printing probed modes for output eDP-1 [ 14.110] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 1968 2000 2200 1080 1083 1088 1125 (67.5 kHz eP) [ 14.110] (II) modeset(0): EDID for output DP-1 [ 14.110] (II) modeset(0): Output eDP-1 connected [ 14.110] (II) modeset(0): Output DP-1 disconnected [ 14.110] (II) modeset(0): Using exact sizes for initial modes [ 14.110] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0 [ 14.110] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 14.110] (==) modeset(0): DPI set to (96, 96) [ 14.110] (II) Loading sub module "fb" [ 14.110] (II) LoadModule: "fb" [ 14.111] (II) Loading /usr/lib/xorg/modules/libfb.so [ 14.130] (II) Module fb: vendor="X.Org Foundation" [ 14.130] compiled for 1.20.7, module version = 1.0.0 [ 14.130] ABI class: X.Org ANSI C Emulation, version 0.4 [ 14.130] (II) UnloadModule: "fbdev" [ 14.130] (II) Unloading fbdev [ 14.130] (II) UnloadSubModule: "fbdevhw" [ 14.130] (II) Unloading fbdevhw [ 14.383] (==) modeset(0): Backing store enabled [ 14.383] (==) modeset(0): Silken mouse enabled [ 14.390] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 14.391] (==) modeset(0): DPMS enabled [ 14.392] (II) modeset(0): [DRI2] Setup complete [ 14.392] (II) modeset(0): [DRI2] DRI driver: rockchip [ 14.392] (II) modeset(0): [DRI2] VDPAU driver: rockchip [ 14.392] (II) Initializing extension Generic Event Extension [ 14.392] (II) Initializing extension SHAPE [ 14.393] (II) Initializing extension MIT-SHM [ 14.393] (II) Initializing extension XInputExtension [ 14.395] (II) Initializing extension XTEST [ 14.395] (II) Initializing extension BIG-REQUESTS [ 14.395] (II) Initializing extension SYNC [ 14.396] (II) Initializing extension XKEYBOARD [ 14.396] (II) Initializing extension XC-MISC [ 14.396] (II) Initializing extension SECURITY [ 14.397] (II) Initializing extension XFIXES [ 14.397] (II) Initializing extension RENDER [ 14.397] (II) Initializing extension RANDR [ 14.398] (II) Initializing extension COMPOSITE [ 14.398] (II) Initializing extension DAMAGE [ 14.398] (II) Initializing extension MIT-SCREEN-SAVER [ 14.399] (II) Initializing extension DOUBLE-BUFFER [ 14.399] (II) Initializing extension RECORD [ 14.399] (II) Initializing extension DPMS [ 14.399] (II) Initializing extension Present [ 14.400] (II) Initializing extension DRI3 [ 14.400] (II) Initializing extension X-Resource [ 14.400] (II) Initializing extension XVideo [ 14.401] (II) Initializing extension XVideo-MotionCompensation [ 14.401] (II) Initializing extension SELinux [ 14.401] (II) SELinux: Disabled on system [ 14.401] (II) Initializing extension GLX [ 14.644] (II) AIGLX: Loaded and initialized rockchip [ 14.644] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 14.644] (II) Initializing extension XFree86-VidModeExtension [ 14.645] (II) Initializing extension XFree86-DGA [ 14.646] (II) Initializing extension XFree86-DRI [ 14.648] (II) Initializing extension DRI2 [ 14.658] (II) modeset(0): Damage tracking initialized [ 14.658] (II) modeset(0): Setting screen physical size to 508 x 285 [ 14.929] (II) config/udev: Adding input device rockchip,es8316-codec Headphones (/dev/input/event12) [ 14.929] (II) No input driver specified, ignoring this device. [ 14.929] (II) This device may have been added with another device file. [ 14.931] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD (/dev/input/event1) [ 14.931] (**) HAILUCK CO.,LTD USB KEYBOARD: Applying InputClass "libinput keyboard catchall" [ 14.931] (II) LoadModule: "libinput" [ 14.932] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 14.950] (II) Module libinput: vendor="X.Org Foundation" [ 14.950] compiled for 1.20.4, module version = 0.29.0 [ 14.950] Module class: X.Org XInput Driver [ 14.951] ABI class: X.Org XInput driver, version 24.1 [ 14.951] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD' [ 14.951] (**) HAILUCK CO.,LTD USB KEYBOARD: always reports core events [ 14.951] (**) Option "Device" "/dev/input/event1" [ 14.953] (**) Option "_source" "server/udev" [ 14.981] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: is tagged by udev as: Keyboard [ 14.982] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device is a keyboard [ 14.983] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device removed [ 15.020] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1/event1" [ 15.020] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD" (type: KEYBOARD, id 6) [ 15.021] (**) Option "xkb_model" "pc104" [ 15.021] (**) Option "xkb_layout" "us" [ 15.021] (**) Option "xkb_options" "lv3:ralt_switch" [ 15.078] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: is tagged by udev as: Keyboard [ 15.078] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device is a keyboard [ 15.079] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Mouse (/dev/input/event7) [ 15.079] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: Applying InputClass "libinput pointer catchall" [ 15.079] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Mouse' [ 15.079] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: always reports core events [ 15.079] (**) Option "Device" "/dev/input/event7" [ 15.080] (**) Option "_source" "server/udev" [ 15.082] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: is tagged by udev as: Mouse [ 15.082] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device is a pointer [ 15.083] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device removed [ 15.221] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/event7" [ 15.221] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Mouse" (type: MOUSE, id 7) [ 15.223] (**) Option "AccelerationScheme" "none" [ 15.223] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: (accel) selected scheme none/0 [ 15.223] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: (accel) acceleration factor: 2.000 [ 15.223] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: (accel) acceleration threshold: 4 [ 15.234] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: is tagged by udev as: Mouse [ 15.235] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device is a pointer [ 15.239] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Mouse (/dev/input/mouse1) [ 15.240] (II) No input driver specified, ignoring this device. [ 15.240] (II) This device may have been added with another device file. [ 15.243] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Touchpad (/dev/input/event8) [ 15.244] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: Applying InputClass "libinput touchpad catchall" [ 15.244] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Touchpad' [ 15.244] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: always reports core events [ 15.244] (**) Option "Device" "/dev/input/event8" [ 15.244] (**) Option "_source" "server/udev" [ 15.251] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: is tagged by udev as: Touchpad [ 15.254] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device is a touchpad [ 15.254] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device removed [ 15.342] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/event8" [ 15.342] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Touchpad" (type: TOUCHPAD, id 8) [ 15.353] (**) Option "AccelerationScheme" "none" [ 15.353] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: (accel) selected scheme none/0 [ 15.353] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: (accel) acceleration factor: 2.000 [ 15.354] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: (accel) acceleration threshold: 4 [ 15.363] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: is tagged by udev as: Touchpad [ 15.366] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device is a touchpad [ 15.369] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Touchpad (/dev/input/mouse2) [ 15.369] (II) No input driver specified, ignoring this device. [ 15.369] (II) This device may have been added with another device file. [ 15.371] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD System Control (/dev/input/event9) [ 15.371] (**) HAILUCK CO.,LTD USB KEYBOARD System Control: Applying InputClass "libinput keyboard catchall" [ 15.371] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD System Control' [ 15.371] (**) HAILUCK CO.,LTD USB KEYBOARD System Control: always reports core events [ 15.371] (**) Option "Device" "/dev/input/event9" [ 15.371] (**) Option "_source" "server/udev" [ 15.376] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: is tagged by udev as: Keyboard [ 15.376] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device is a keyboard [ 15.377] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device removed [ 15.411] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16/event9" [ 15.411] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD System Control" (type: KEYBOARD, id 9) [ 15.411] (**) Option "xkb_model" "pc104" [ 15.411] (**) Option "xkb_layout" "us" [ 15.412] (**) Option "xkb_options" "lv3:ralt_switch" [ 15.428] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: is tagged by udev as: Keyboard [ 15.429] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device is a keyboard [ 15.433] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Consumer Control (/dev/input/event10) [ 15.433] (**) HAILUCK CO.,LTD USB KEYBOARD Consumer Control: Applying InputClass "libinput keyboard catchall" [ 15.433] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Consumer Control' [ 15.434] (**) HAILUCK CO.,LTD USB KEYBOARD Consumer Control: always reports core events [ 15.434] (**) Option "Device" "/dev/input/event10" [ 15.434] (**) Option "_source" "server/udev" [ 15.438] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: is tagged by udev as: Keyboard [ 15.438] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device is a keyboard [ 15.439] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device removed [ 15.520] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17/event10" [ 15.520] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Consumer Control" (type: KEYBOARD, id 10) [ 15.520] (**) Option "xkb_model" "pc104" [ 15.520] (**) Option "xkb_layout" "us" [ 15.521] (**) Option "xkb_options" "lv3:ralt_switch" [ 15.537] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: is tagged by udev as: Keyboard [ 15.538] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device is a keyboard [ 15.543] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control (/dev/input/event13) [ 15.543] (**) HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: Applying InputClass "libinput keyboard catchall" [ 15.543] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control' [ 15.543] (**) HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: always reports core events [ 15.543] (**) Option "Device" "/dev/input/event13" [ 15.543] (**) Option "_source" "server/udev" [ 15.548] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: is tagged by udev as: Keyboard [ 15.548] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device is a keyboard [ 15.549] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device removed [ 15.640] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18/event13" [ 15.640] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control" (type: KEYBOARD, id 11) [ 15.640] (**) Option "xkb_model" "pc104" [ 15.640] (**) Option "xkb_layout" "us" [ 15.640] (**) Option "xkb_options" "lv3:ralt_switch" [ 15.649] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: is tagged by udev as: Keyboard [ 15.649] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device is a keyboard [ 15.653] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 (/dev/input/event0) [ 15.654] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: Applying InputClass "libinput keyboard catchall" [ 15.654] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0' [ 15.654] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: always reports core events [ 15.654] (**) Option "Device" "/dev/input/event0" [ 15.654] (**) Option "_source" "server/udev" [ 15.660] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: is tagged by udev as: Keyboard [ 15.661] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device is a keyboard [ 15.662] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device removed [ 15.720] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0/event0" [ 15.720] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0" (type: KEYBOARD, id 12) [ 15.720] (**) Option "xkb_model" "pc104" [ 15.720] (**) Option "xkb_layout" "us" [ 15.720] (**) Option "xkb_options" "lv3:ralt_switch" [ 15.731] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: is tagged by udev as: Keyboard [ 15.731] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device is a keyboard [ 15.737] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse (/dev/input/event2) [ 15.737] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: Applying InputClass "libinput pointer catchall" [ 15.737] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse' [ 15.737] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: always reports core events [ 15.737] (**) Option "Device" "/dev/input/event2" [ 15.737] (**) Option "_source" "server/udev" [ 15.814] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: is tagged by udev as: Mouse [ 15.816] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device is a pointer [ 15.817] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device removed [ 15.950] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/event2" [ 15.950] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse" (type: MOUSE, id 13) [ 15.951] (**) Option "AccelerationScheme" "none" [ 15.952] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: (accel) selected scheme none/0 [ 15.952] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: (accel) acceleration factor: 2.000 [ 15.952] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: (accel) acceleration threshold: 4 [ 16.034] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: is tagged by udev as: Mouse [ 16.036] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device is a pointer [ 16.042] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse (/dev/input/mouse0) [ 16.042] (II) No input driver specified, ignoring this device. [ 16.042] (II) This device may have been added with another device file. [ 16.044] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control (/dev/input/event3) [ 16.045] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 16.045] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control' [ 16.045] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events [ 16.045] (**) Option "Device" "/dev/input/event3" [ 16.045] (**) Option "_source" "server/udev" [ 16.050] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard [ 16.050] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard [ 16.051] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed [ 16.160] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: needs a virtual subdevice [ 16.160] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3" [ 16.160] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: MOUSE, id 14) [ 16.161] (**) Option "AccelerationScheme" "none" [ 16.161] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) selected scheme none/0 [ 16.162] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration factor: 2.000 [ 16.162] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration threshold: 4 [ 16.174] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard [ 16.174] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard [ 16.179] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control (/dev/input/event4) [ 16.179] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 16.179] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control' [ 16.179] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events [ 16.179] (**) Option "Device" "/dev/input/event4" [ 16.179] (**) Option "_source" "server/udev" [ 16.186] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard [ 16.186] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard [ 16.187] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed [ 16.220] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: needs a virtual subdevice [ 16.221] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4" [ 16.221] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: MOUSE, id 15) [ 16.222] (**) Option "AccelerationScheme" "none" [ 16.222] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) selected scheme none/0 [ 16.222] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration factor: 2.000 [ 16.222] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration threshold: 4 [ 16.239] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard [ 16.240] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard [ 16.244] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control (/dev/input/event6) [ 16.244] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: Applying InputClass "libinput keyboard catchall" [ 16.244] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control' [ 16.244] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: always reports core events [ 16.244] (**) Option "Device" "/dev/input/event6" [ 16.244] (**) Option "_source" "server/udev" [ 16.250] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: is tagged by udev as: Keyboard [ 16.251] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device is a keyboard [ 16.251] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device removed [ 16.320] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5/event6" [ 16.320] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control" (type: KEYBOARD, id 16) [ 16.320] (**) Option "xkb_model" "pc104" [ 16.320] (**) Option "xkb_layout" "us" [ 16.320] (**) Option "xkb_options" "lv3:ralt_switch" [ 16.331] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: is tagged by udev as: Keyboard [ 16.332] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device is a keyboard [ 16.336] (II) config/udev: Adding input device USB Camera: USB Camera (/dev/input/event11) [ 16.336] (**) USB Camera: USB Camera: Applying InputClass "libinput keyboard catchall" [ 16.336] (II) Using input driver 'libinput' for 'USB Camera: USB Camera' [ 16.336] (**) USB Camera: USB Camera: always reports core events [ 16.336] (**) Option "Device" "/dev/input/event11" [ 16.336] (**) Option "_source" "server/udev" [ 16.350] (II) event11 - USB Camera: USB Camera: is tagged by udev as: Keyboard [ 16.350] (II) event11 - USB Camera: USB Camera: device is a keyboard [ 16.350] (II) event11 - USB Camera: USB Camera: device removed [ 16.480] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event11" [ 16.480] (II) XINPUT: Adding extended input device "USB Camera: USB Camera" (type: KEYBOARD, id 17) [ 16.480] (**) Option "xkb_model" "pc104" [ 16.481] (**) Option "xkb_layout" "us" [ 16.481] (**) Option "xkb_options" "lv3:ralt_switch" [ 16.496] (II) event11 - USB Camera: USB Camera: is tagged by udev as: Keyboard [ 16.496] (II) event11 - USB Camera: USB Camera: device is a keyboard [ 16.502] (II) config/udev: Adding input device gpio-keys (/dev/input/event5) [ 16.502] (**) gpio-keys: Applying InputClass "libinput keyboard catchall" [ 16.502] (II) Using input driver 'libinput' for 'gpio-keys' [ 16.502] (**) gpio-keys: always reports core events [ 16.502] (**) Option "Device" "/dev/input/event5" [ 16.502] (**) Option "_source" "server/udev" [ 16.504] (II) event5 - gpio-keys: is tagged by udev as: Keyboard Switch [ 16.504] (II) event5 - gpio-keys: device is a keyboard [ 16.504] (II) event5 - gpio-keys: device is a switch device [ 16.505] (II) event5 - gpio-keys: device removed [ 16.550] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys/input/input13/event5" [ 16.550] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 18) [ 16.550] (**) Option "xkb_model" "pc104" [ 16.550] (**) Option "xkb_layout" "us" [ 16.551] (**) Option "xkb_options" "lv3:ralt_switch" [ 16.559] (II) event5 - gpio-keys: is tagged by udev as: Keyboard Switch [ 16.560] (II) event5 - gpio-keys: device is a keyboard [ 16.560] (II) event5 - gpio-keys: device is a switch device [ 16.591] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 16.591] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control' [ 16.591] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events [ 16.591] (**) Option "Device" "/dev/input/event3" [ 16.591] (**) Option "_source" "_driver/libinput" [ 16.591] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is a virtual subdevice [ 16.592] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3" [ 16.592] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: KEYBOARD, id 19) [ 16.592] (**) Option "xkb_model" "pc104" [ 16.592] (**) Option "xkb_layout" "us" [ 16.592] (**) Option "xkb_options" "lv3:ralt_switch" [ 16.593] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 16.593] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control' [ 16.593] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events [ 16.593] (**) Option "Device" "/dev/input/event4" [ 16.593] (**) Option "_source" "_driver/libinput" [ 16.593] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is a virtual subdevice [ 16.593] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4" [ 16.593] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: KEYBOARD, id 20) [ 16.593] (**) Option "xkb_model" "pc104" [ 16.593] (**) Option "xkb_layout" "us" [ 16.594] (**) Option "xkb_options" "lv3:ralt_switch" [ 22.367] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device removed [ 22.400] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device removed [ 22.490] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device removed [ 22.570] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device removed [ 22.610] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device removed [ 22.700] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device removed [ 22.780] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device removed [ 22.820] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device removed [ 22.910] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device removed [ 22.950] (II) event11 - USB Camera: USB Camera: device removed [ 23.050] (II) event5 - gpio-keys: device removed [ 23.090] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed [ 23.170] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed [ 23.230] (II) AIGLX: Suspending AIGLX clients for VT switch [ 441.734] (II) AIGLX: Resuming AIGLX clients after VT switch [ 441.801] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: is tagged by udev as: Keyboard [ 441.801] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device is a keyboard [ 441.810] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: is tagged by udev as: Mouse [ 441.811] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device is a pointer [ 441.820] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: is tagged by udev as: Touchpad [ 441.823] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device is a touchpad [ 441.828] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: is tagged by udev as: Keyboard [ 441.829] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device is a keyboard [ 441.834] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: is tagged by udev as: Keyboard [ 441.834] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device is a keyboard [ 441.839] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: is tagged by udev as: Keyboard [ 441.840] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device is a keyboard [ 441.846] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: is tagged by udev as: Keyboard [ 441.846] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device is a keyboard [ 441.925] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: is tagged by udev as: Mouse [ 441.927] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device is a pointer [ 441.938] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard [ 441.939] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard [ 441.944] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard [ 441.945] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard [ 441.950] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: is tagged by udev as: Keyboard [ 441.951] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device is a keyboard [ 441.955] (II) event11 - USB Camera: USB Camera: is tagged by udev as: Keyboard [ 441.956] (II) event11 - USB Camera: USB Camera: device is a keyboard [ 441.958] (II) event5 - gpio-keys: is tagged by udev as: Keyboard Switch [ 441.958] (II) event5 - gpio-keys: device is a keyboard [ 441.958] (II) event5 - gpio-keys: device is a switch device [ 6111.052] (EE) client bug: timer event2 debounce short: scheduled expiry is in the past (-4ms), your system is too slow udev information: ----------------- P: /devices/platform/es8316-sound/sound/card0/input11 L: 0 E: DEVPATH=/devices/platform/es8316-sound/sound/card0/input11 E: SUBSYSTEM=input E: PRODUCT=0/0/0/0 E: NAME="rockchip,es8316-codec Headphones" E: PHYS="ALSA" E: PROP=0 E: EV=21 E: SW=4 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: USEC_INITIALIZED=4545274 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=platform-es8316-sound E: ID_PATH_TAG=platform-es8316-sound E: ID_FOR_SEAT=input-platform-es8316-sound E: TAGS=:seat: P: /devices/platform/es8316-sound/sound/card0/input11/event12 N: input/event12 L: 0 S: input/by-path/platform-es8316-sound-event E: DEVPATH=/devices/platform/es8316-sound/sound/card0/input11/event12 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event12 E: MAJOR=13 E: MINOR=76 E: USEC_INITIALIZED=8872415 E: ID_INPUT=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=platform-es8316-sound E: ID_PATH_TAG=platform-es8316-sound E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA E: DEVLINKS=/dev/input/by-path/platform-es8316-sound-event E: TAGS=:power-switch: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1 L: 0 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1 E: SUBSYSTEM=input E: PRODUCT=3/258a/1e/110 E: NAME="HAILUCK CO.,LTD USB KEYBOARD" E: PHYS="usb-fe3a0000.usb-1/input0" E: UNIQ="" E: PROP=0 E: EV=120013 E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe E: MSC=10 E: LED=7 E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw E: USEC_INITIALIZED=4257926 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.0 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_0 E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_0 E: TAGS=:seat: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1/event1 N: input/event1 L: 0 S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-kbd S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.0-event-kbd E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1/event1 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event1 E: MAJOR=13 E: MINOR=65 E: USEC_INITIALIZED=9125269 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.0 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_0 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-kbd /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.0-event-kbd E: TAGS=:power-switch: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14 L: 0 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14 E: SUBSYSTEM=input E: PRODUCT=3/258a/1e/110 E: NAME="HAILUCK CO.,LTD USB KEYBOARD Mouse" E: PHYS="usb-fe3a0000.usb-1/input1" E: UNIQ="" E: PROP=0 E: EV=17 E: KEY=70000 0 0 0 0 E: REL=3 E: MSC=10 E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,2,4,k110,111,112,r0,1,am4,lsfw E: USEC_INITIALIZED=10228015 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1 E: TAGS=:seat: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/event7 N: input/event7 L: 0 S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/event7 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event7 E: MAJOR=13 E: MINOR=71 E: USEC_INITIALIZED=10418334 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/mouse1 N: input/mouse1 L: 0 S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/mouse1 E: SUBSYSTEM=input E: DEVNAME=/dev/input/mouse1 E: MAJOR=13 E: MINOR=33 E: USEC_INITIALIZED=10235226 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15 L: 0 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15 E: SUBSYSTEM=input E: PRODUCT=3/258a/1e/110 E: NAME="HAILUCK CO.,LTD USB KEYBOARD Touchpad" E: PHYS="usb-fe3a0000.usb-1/input1" E: UNIQ="" E: PROP=5 E: EV=1b E: KEY=e420 10000 0 0 0 0 E: ABS=2e0800000000003 E: MSC=20 E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,3,4,k110,145,14A,14D,14E,14F,ra0,1,2F,35,36,37,39,m5,lsfw E: USEC_INITIALIZED=10226933 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1 E: TAGS=:seat: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/event8 N: input/event8 L: 0 S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/event8 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event8 E: MAJOR=13 E: MINOR=72 E: USEC_INITIALIZED=10563275 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_INPUT_WIDTH_MM=48 E: ID_INPUT_HEIGHT_MM=31 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: ID_INPUT_TOUCHPAD_INTEGRATION=internal E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/mouse2 N: input/mouse2 L: 0 S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/mouse2 E: SUBSYSTEM=input E: DEVNAME=/dev/input/mouse2 E: MAJOR=13 E: MINOR=34 E: USEC_INITIALIZED=10239041 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16 L: 0 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16 E: SUBSYSTEM=input E: PRODUCT=3/258a/1e/110 E: NAME="HAILUCK CO.,LTD USB KEYBOARD System Control" E: PHYS="usb-fe3a0000.usb-1/input1" E: UNIQ="" E: PROP=0 E: EV=13 E: KEY=c000 10000000000000 0 E: MSC=10 E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,k74,8E,8F,ram4,lsfw E: USEC_INITIALIZED=10234981 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1 E: TAGS=:seat: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16/event9 N: input/event9 L: 0 S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16/event9 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event9 E: MAJOR=13 E: MINOR=73 E: USEC_INITIALIZED=10399946 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1 E: DEVLINKS=/dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event /dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01 E: TAGS=:power-switch: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17 L: 0 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17 E: SUBSYSTEM=input E: PRODUCT=3/258a/1e/110 E: NAME="HAILUCK CO.,LTD USB KEYBOARD Consumer Control" E: PHYS="usb-fe3a0000.usb-1/input1" E: UNIQ="" E: PROP=0 E: EV=13 E: KEY=28000000000 0 0 1000302000000 3878d8011001 e000000000000 0 E: MSC=10 E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,k71,72,73,80,8C,90,9B,9C,9E,9F,A3,A4,A5,A6,AB,AC,AD,D9,E0,E1,F0,1A7,1A9,ram4,lsfw E: USEC_INITIALIZED=10234047 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1 E: TAGS=:seat: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17/event10 N: input/event10 L: 0 S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17/event10 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event10 E: MAJOR=13 E: MINOR=74 E: USEC_INITIALIZED=10419663 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1 E: DEVLINKS=/dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event /dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01 E: TAGS=:power-switch: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18 L: 0 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18 E: SUBSYSTEM=input E: PRODUCT=3/258a/1e/110 E: NAME="HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control" E: PHYS="usb-fe3a0000.usb-1/input1" E: UNIQ="" E: PROP=0 E: EV=13 E: KEY=80000000000000 0 0 0 E: MSC=10 E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,kF7,ram4,lsfw E: USEC_INITIALIZED=10225640 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1 E: TAGS=:seat: P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18/event13 N: input/event13 L: 0 S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01 E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18/event13 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event13 E: MAJOR=13 E: MINOR=77 E: USEC_INITIALIZED=10419600 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=HAILUCK_CO._LTD E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD E: ID_VENDOR_ID=258a E: ID_MODEL=USB_KEYBOARD E: ID_MODEL_ENC=USB\x20KEYBOARD E: ID_MODEL_ID=001e E: ID_REVISION=0100 E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1 E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1 E: DEVLINKS=/dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event /dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01 E: TAGS=:power-switch: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0 L: 0 E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0 E: SUBSYSTEM=input E: PRODUCT=3/45e/7a5/111 E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0" E: PHYS="usb-fe3c0000.usb-1.1/input0" E: UNIQ="" E: PROP=0 E: EV=120013 E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe E: MSC=10 E: LED=7 E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw E: USEC_INITIALIZED=4276450 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.0 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_0 E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_0 E: TAGS=:seat: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0/event0 N: input/event0 L: 0 S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.0-event-kbd S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-kbd E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0/event0 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event0 E: MAJOR=13 E: MINOR=64 E: USEC_INITIALIZED=9123505 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.0 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_0 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1 E: DEVLINKS=/dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.0-event-kbd /dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-kbd E: TAGS=:power-switch: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2 L: 0 E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2 E: SUBSYSTEM=input E: PRODUCT=3/45e/7a5/111 E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse" E: PHYS="usb-fe3c0000.usb-1.1/input1" E: UNIQ="" E: PROP=0 E: EV=17 E: KEY=1f0000 0 0 0 0 E: REL=1943 E: MSC=10 E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,2,4,k110,111,112,113,114,r0,1,6,8,B,C,am4,lsfw E: USEC_INITIALIZED=4267926 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1 E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_1 E: TAGS=:seat: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/event2 N: input/event2 L: 0 S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-event-mouse S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event-mouse E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/event2 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event2 E: MAJOR=13 E: MINOR=66 E: USEC_INITIALIZED=9181032 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1 E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-event-mouse /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event-mouse P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/mouse0 N: input/mouse0 L: 0 S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-mouse S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-mouse E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/mouse0 E: SUBSYSTEM=input E: DEVNAME=/dev/input/mouse0 E: MAJOR=13 E: MINOR=32 E: USEC_INITIALIZED=8867755 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1 E: DEVLINKS=/dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-mouse /dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-mouse P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3 L: 0 E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3 E: SUBSYSTEM=input E: PRODUCT=3/45e/7a5/111 E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" E: PHYS="usb-fe3c0000.usb-1.1/input1" E: UNIQ="" E: PROP=0 E: EV=5 E: REL=1040 E: MODALIAS=input:b0003v045Ep07A5e0111-e0,2,kr6,C,amlsfw E: USEC_INITIALIZED=3947543 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1 E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_1 E: TAGS=:seat: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3 N: input/event3 L: 0 S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if01 S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event3 E: MAJOR=13 E: MINOR=67 E: USEC_INITIALIZED=9501867 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if01 /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event E: TAGS=:power-switch: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4 L: 0 E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4 E: SUBSYSTEM=input E: PRODUCT=3/45e/7a5/111 E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" E: PHYS="usb-fe3c0000.usb-1.1/input2" E: UNIQ="" E: PROP=0 E: EV=10001f E: KEY=3f000301ff 0 0 483ffff17aff32d bfd4444600000000 1 130ff38b17c007 ffff7bfad9415fff ffbeffdfffefffff fffffffffffffffe E: REL=1040 E: ABS=100000000 E: MSC=10 E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,2,3,4,14,k71,72,73,74,75,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E5,E6,E7,E8,E9,EA,EB,F0,F1,F4,100,161,162,166,16A,16E,172,174,176,177,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,247,248,250,251,260,261,262,263,264,265,r6,C,a20,m4,lsfw E: USEC_INITIALIZED=3956320 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=02 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2 E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_2 E: TAGS=:seat: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4 N: input/event4 L: 0 S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if02-event-kbd S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event-kbd E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event4 E: MAJOR=13 E: MINOR=68 E: USEC_INITIALIZED=9122014 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=02 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if02-event-kbd /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event-kbd E: TAGS=:power-switch: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5 L: 0 E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5 E: SUBSYSTEM=input E: PRODUCT=3/45e/7a5/111 E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control" E: PHYS="usb-fe3c0000.usb-1.1/input2" E: UNIQ="" E: PROP=0 E: EV=1b E: KEY=40000001000000 1200000000 0 800000000 40000010cc00 10168000000000 0 E: ABS=10000000000 E: MSC=10 E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,3,4,k74,8A,8B,8E,8F,94,AE,E3,161,164,198,1B6,ra28,m4,lsfw E: USEC_INITIALIZED=4038188 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=02 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2 E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_2 E: TAGS=:seat: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5/event6 N: input/event6 L: 0 S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if02 S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5/event6 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event6 E: MAJOR=13 E: MINOR=70 E: USEC_INITIALIZED=9116480 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0 E: ID_MODEL_ID=07a5 E: ID_REVISION=0797 E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0 E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=02 E: ID_USB_DRIVER=usbhid E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if02 /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event E: TAGS=:power-switch: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12 L: 0 E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12 E: SUBSYSTEM=input E: PRODUCT=3/c45/6321/0 E: NAME="USB Camera: USB Camera" E: PHYS="usb-fe3c0000.usb-1.2/button" E: PROP=0 E: EV=3 E: KEY=100000 0 0 0 E: MODALIAS=input:b0003v0C45p6321e0000-e0,1,kD4,ramlsfw E: USEC_INITIALIZED=4516933 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Sonix_Technology_Co.__Ltd. E: ID_VENDOR_ENC=Sonix\x20Technology\x20Co.\x2c\x20Ltd. E: ID_VENDOR_ID=0c45 E: ID_MODEL=USB_Camera E: ID_MODEL_ENC=USB\x20Camera E: ID_MODEL_ID=6321 E: ID_REVISION=0000 E: ID_SERIAL=Sonix_Technology_Co.__Ltd._USB_Camera E: ID_TYPE=video E: ID_BUS=usb E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=uvcvideo E: ID_PATH=platform-fe3c0000.usb-usb-0:1.2:1.0 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_2_1_0 E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_2_1_0 E: TAGS=:seat: P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event11 N: input/event11 L: 0 S: input/by-id/usb-Sonix_Technology_Co.__Ltd._USB_Camera-event-if00 S: input/by-path/platform-fe3c0000.usb-usb-0:1.2:1.0-event E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event11 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event11 E: MAJOR=13 E: MINOR=75 E: USEC_INITIALIZED=9197059 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Sonix_Technology_Co.__Ltd. E: ID_VENDOR_ENC=Sonix\x20Technology\x20Co.\x2c\x20Ltd. E: ID_VENDOR_ID=0c45 E: ID_MODEL=USB_Camera E: ID_MODEL_ENC=USB\x20Camera E: ID_MODEL_ID=6321 E: ID_REVISION=0000 E: ID_SERIAL=Sonix_Technology_Co.__Ltd._USB_Camera E: ID_TYPE=video E: ID_BUS=usb E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=uvcvideo E: ID_PATH=platform-fe3c0000.usb-usb-0:1.2:1.0 E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_2_1_0 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=3/c45/6321:usb-fe3c0000.usb-1 E: DEVLINKS=/dev/input/by-id/usb-Sonix_Technology_Co.__Ltd._USB_Camera-event-if00 /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.2:1.0-event E: TAGS=:power-switch: P: /devices/platform/gpio-keys/input/input13 L: 0 E: DEVPATH=/devices/platform/gpio-keys/input/input13 E: SUBSYSTEM=input E: PRODUCT=19/1/1/100 E: NAME="gpio-keys" E: PHYS="gpio-keys/input0" E: PROP=0 E: EV=23 E: KEY=10000000000000 0 E: SW=1 E: MODALIAS=input:b0019v0001p0001e0100-e0,1,5,k74,ramlsfw0, E: USEC_INITIALIZED=9626232 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=platform-gpio-keys E: ID_PATH_TAG=platform-gpio-keys E: ID_FOR_SEAT=input-platform-gpio-keys E: TAGS=:seat: P: /devices/platform/gpio-keys/input/input13/event5 N: input/event5 L: 0 S: input/by-path/platform-gpio-keys-event E: DEVPATH=/devices/platform/gpio-keys/input/input13/event5 E: SUBSYSTEM=input E: DEVNAME=/dev/input/event5 E: MAJOR=13 E: MINOR=69 E: USEC_INITIALIZED=10389183 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_SWITCH=1 E: ID_PATH=platform-gpio-keys E: ID_PATH_TAG=platform-gpio-keys E: XKBMODEL=pc104 E: XKBLAYOUT=us E: XKBOPTIONS=lv3:ralt_switch E: BACKSPACE=guess E: LIBINPUT_DEVICE_GROUP=19/1/1:gpio-keys E: DEVLINKS=/dev/input/by-path/platform-gpio-keys-event E: TAGS=:power-switch: DRM Information from dmesg: --------------------------- [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 4.284117] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm]) [ 4.285907] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm]) [ 4.287151] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_dp_component_ops [rockchipdrm]) [ 4.287612] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn [ 4.287701] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm]) [ 4.287709] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.287712] [drm] No driver support for vblank timestamp query. [ 4.745484] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device [ 4.781295] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 9.207084] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 1 [ 6045.141622] WARNING: CPU: 0 PID: 697 at drivers/gpu/drm/panfrost/panfrost_mmu.c:458 panfrost_mmu_map_fault_addr+0x368/0x440 [panfrost] [ 6045.141626] Modules linked in: bnep panfrost gpio_keys hci_uart btqca btbcm btintel btsdio bluetooth hid_multitouch dw_wdt rockchip_rga joydev videobuf2_dma_sg cw2015_battery ecdh_generic brcmfmac ecc snd_soc_hdmi_codec dm_crypt gpu_sched nf_defrag_ipv6 pwm_fan cfg80211 rfkill brcmutil nvme nvme_core snd_soc_rockchip_i2s uvcvideo snd_soc_rockchip_pcm snd_soc_simple_amplifier rockchip_thermal snd_soc_es8316 rockchip_saradc rockchipdrm analogix_dp dw_hdmi cec dw_mipi_dsi drm_kms_helper syscopyarea panel_simple sysfillrect sysimgblt fb_sys_fops snd_soc_simple_card snd_soc_simple_card_utils pwm_bl drm drm_panel_orientation_quirks -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: arm64 (aarch64) Kernel: Linux 5.5.0-1-pinebookpro-arm64 (SMP w/6 CPU cores; PREEMPT) Kernel taint flags: TAINT_WARN Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages libgl1-mesa-dri depends on: ii libc6 2.29-10 ii libdrm-amdgpu1 2.4.100-4 ii libdrm-nouveau2 2.4.100-4 ii libdrm-radeon1 2.4.100-4 ii libdrm2 2.4.100-4 ii libelf1 0.176-1.1 ii libexpat1 2.2.9-1 ii libgcc-s1 10-20200222-1 ii libglapi-mesa 20.0.0-1 ii libllvm9 1:9.0.1-8 ii libsensors5 1:3.6.0-2 ii libstdc++6 10-20200222-1 ii libzstd1 1.4.4+dfsg-3 ii zlib1g 1:1.2.11.dfsg-1.2 libgl1-mesa-dri recommends no packages. libgl1-mesa-dri suggests no packages. Versions of packages xserver-xorg depends on: ii x11-xkb-utils 7.7+4 ii xkb-data 2.26-2 ii xserver-xorg-core 2:1.20.7-3 ii xserver-xorg-input-all 1:7.7+20 ii xserver-xorg-input-libinput [xorg-driver-input] 0.29.0-1 ii xserver-xorg-input-wacom [xorg-driver-input] 0.34.99.1-1 ii xserver-xorg-video-all 1:7.7+20 ii xserver-xorg-video-amdgpu [xorg-driver-video] 19.1.0-1 ii xserver-xorg-video-ati [xorg-driver-video] 1:19.1.0-1 ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.5.0-1 ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.16-1 ii xserver-xorg-video-radeon [xorg-driver-video] 1:19.1.0-1 ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.4.0-2 Versions of packages xserver-xorg recommends: ii xserver-xorg-legacy 2:1.20.7-3 Versions of packages xserver-xorg-core depends on: ii keyboard-configuration 1.194 ii libaudit1 1:2.8.5-2+b1 ii libbsd0 0.10.0-1 ii libc6 2.29-10 ii libdbus-1-3 1.12.16-2 ii libdrm2 2.4.100-4 ii libegl1 1.3.1-1 ii libepoxy0 1.5.4-1 ii libgbm1 20.0.0-1 ii libgcrypt20 1.8.5-5 ii libgl1 1.3.1-1 ii libpciaccess0 0.14-1 ii libpixman-1-0 0.36.0-1 ii libselinux1 3.0-1+b1 ii libsystemd0 244.3-1 ii libudev1 244.3-1 ii libunwind8 1.2.1-9 ii libxau6 1:1.0.8-1+b2 ii libxdmcp6 1:1.1.2-3 ii libxfont2 1:2.0.3-1 ii libxshmfence1 1.3-1 ii udev 244.3-1 ii xserver-common 2:1.20.7-3 Versions of packages xserver-xorg-core recommends: ii libpam-systemd 244.3-1 Versions of packages xserver-xorg-core suggests: ii xfonts-100dpi 1:1.0.4+nmu1 ii xfonts-75dpi 1:1.0.4+nmu1 ii xfonts-scalable 1:1.0.3-1.1 -- no debconf information
