Josh, I have two main thoughts. First, try to do something like compile your kernel (when running in a text console :) to make sure your memory isn't running beyond its limits. If you can compile kernels fine, then you probably have fine memory. :)
I was getting signal 11s when I had my sync rates set too high. See if you can set your sync rates lower. (When I had mine set high, sig11. Changing them lower removed my sig11s. High again, sig11 again. However, it was quite specifically right at start.) HTH, good luck. * Josh Carroll <[EMAIL PROTECTED]> [000909 20:58]: > I just recently updated to the phase2 debs (version4), and all I get > is sig11 constantly, at random times. Sometimes as soon as I start X, > sometimes not for almost an hour. It varies, but it NEVER stays > resident more than an hour or two. This is really annoying, and I'm > not sure what the problem is. I'm using the GeForce2 with the latest > Nvidia drivers (0.9.5). I've attached the log from XFree. -- Seth Arnold | http://www.willamette.edu/~sarnold/
