Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20171229-1
Severity: important
Dear Maintainer,
* What led up to the situation?
Playing video, either on MPlayer or VLC. You get parts of the video
that are not synced with the rest. Here there is a picture:
https://i.imgur.com/ctsXLLT.jpg
You can see that pattern which happens on different parts of the video,
when there's a lot of movement.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Tried many different things. I was able to verify that this problem is
not present on a live CD of Linux Mint Debian Edition. Then I tried a live CD
version of Debian: debian-live-9.3.0-amd64-xfce. The problem was present on
Debian live CD, but not on LMDE.
These errors listed in Xorg's log is present on my Debian installation. They
were not present in LMDE
cat /var/log/Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 51.808] (EE) intel(0): failed to set mode: Input/output error [5]
[ 54.608] (EE) synaptics: ETPS/2 Elantech Touchpad: Synaptics driver unable
to detect protocol
[ 54.608] (EE) PreInit returned 11 for "ETPS/2 Elantech Touchpad"
[ 54.623] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 8753.929] (EE)
[ 8753.929] (EE) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 8753.929] (EE)
[ 8753.929] (EE)
[ 8753.929] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[ 8753.929] (EE)
[ 8753.929] (EE)
[ 8753.929] (EE) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 8753.929] (EE)
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Mar 19 2011 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Jan 18 09:11 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor
Integrated Graphics Controller [8086:0046] (rev 02)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 805 Mar 23 2011 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "MinSpeed" "0.5"
Option "MaxSpeed" "1.0"
Option "AccelFactor" "0.075"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "LockedDrags" "1"
Option "VertEdgeScroll" "1"
Option "HorizEdgeScroll" "1"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
# Screen "Default Screen"
# InputDevice "Generic Keyboard"
InputDevice "Touchpad"
EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
#options i915 modeset=0
Kernel version (/proc/version):
-------------------------------
Linux version 4.14.0-3-amd64 (debian-ker...@lists.debian.org) (gcc version
7.2.0 (Debian 7.2.0-19)) #1 SMP Debian 4.14.13-1 (2018-01-14)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 30567 Oct 13 2015 /var/log/Xorg.0.log
-rw-r--r-- 1 the98 the98 5845 Jan 14 19:27
/home/the98/.local/share/xorg/Xorg.1.log
-rw-r--r-- 1 the98 the98 46028 Mar 18 17:48
/home/the98/.local/share/xorg/Xorg.0.log
Contents of most recent Xorg X server log file
(/home/the98/.local/share/xorg/Xorg.0.log):
------------------------------------------------------------------------------------------
[ 89.750]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 89.750] X Protocol Version 11, Revision 0
[ 89.750] Build Operating System: Linux 4.9.0-5-amd64 x86_64 Debian
[ 89.750] Current Operating System: Linux g560 4.14.0-3-amd64 #1 SMP Debian
4.14.13-1 (2018-01-14) x86_64
[ 89.750] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-amd64
root=UUID=095e0d3b-db34-4564-bcd1-0768f602acae ro quiet
[ 89.750] Build Date: 26 January 2018 04:30:21PM
[ 89.750] xorg-server 2:1.19.6-1 (https://www.debian.org/support)
[ 89.750] Current version of pixman: 0.34.0
[ 89.750] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 89.750] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 89.751] (==) Log file: "/home/the98/.local/share/xorg/Xorg.0.log", Time:
Sun Mar 18 17:48:28 2018
[ 89.791] (==) Using config file: "/etc/X11/xorg.conf"
[ 89.791] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 89.819] (==) ServerLayout "Default Layout"
[ 89.819] (==) No screen section available. Using defaults.
[ 89.819] (**) |-->Screen "Default Screen Section" (0)
[ 89.819] (**) | |-->Monitor "<default monitor>"
[ 89.825] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 89.825] (**) |-->Input Device "Touchpad"
[ 89.825] (==) Automatically adding devices
[ 89.825] (==) Automatically enabling devices
[ 89.825] (==) Automatically adding GPU devices
[ 89.831] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 89.855] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 89.855] Entry deleted from font path.
[ 89.856] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 89.856] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 89.856] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 89.866] (II) Loader magic: 0x55f33a768de0
[ 89.866] (II) Module ABI versions:
[ 89.866] X.Org ANSI C Emulation: 0.4
[ 89.866] X.Org Video Driver: 23.0
[ 89.866] X.Org XInput driver : 24.1
[ 89.866] X.Org Server Extension : 10.0
[ 89.867] (++) using VT number 1
[ 89.867] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 89.870] (II) systemd-logind: took control of session
/org/freedesktop/login1/session/_31
[ 89.872] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 89.873] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 89.876] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3920 rev 2, Mem @
0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005050/8, BIOS @
0x????????/131072
[ 89.877] (II) LoadModule: "glx"
[ 89.897] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 89.958] (II) Module glx: vendor="X.Org Foundation"
[ 89.958] compiled for 1.19.6, module version = 1.0.0
[ 89.958] ABI class: X.Org Server Extension, version 10.0
[ 89.958] (==) Matched modesetting as autoconfigured driver 0
[ 89.958] (==) Matched fbdev as autoconfigured driver 1
[ 89.958] (==) Matched vesa as autoconfigured driver 2
[ 89.958] (==) Assigned the driver to the xf86ConfigLayout
[ 89.958] (II) LoadModule: "modesetting"
[ 89.978] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 89.990] (II) Module modesetting: vendor="X.Org Foundation"
[ 89.990] compiled for 1.19.6, module version = 1.19.6
[ 89.990] Module class: X.Org Video Driver
[ 89.990] ABI class: X.Org Video Driver, version 23.0
[ 89.990] (II) LoadModule: "fbdev"
[ 89.990] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 90.001] (II) Module fbdev: vendor="X.Org Foundation"
[ 90.001] compiled for 1.19.0, module version = 0.4.4
[ 90.001] Module class: X.Org Video Driver
[ 90.001] ABI class: X.Org Video Driver, version 23.0
[ 90.001] (II) LoadModule: "vesa"
[ 90.003] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 90.011] (II) Module vesa: vendor="X.Org Foundation"
[ 90.011] compiled for 1.19.0, module version = 2.3.4
[ 90.011] Module class: X.Org Video Driver
[ 90.011] ABI class: X.Org Video Driver, version 23.0
[ 90.011] (II) LoadModule: "synaptics"
[ 90.011] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 90.035] (II) Module synaptics: vendor="X.Org Foundation"
[ 90.035] compiled for 1.19.0, module version = 1.9.0
[ 90.035] Module class: X.Org XInput Driver
[ 90.036] ABI class: X.Org XInput driver, version 24.1
[ 90.036] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 90.036] (II) FBDEV: driver for framebuffer: fbdev
[ 90.036] (II) VESA: driver for VESA chipsets: vesa
[ 90.036] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not
permitted)
[ 90.036] (II) modeset(0): using drv /dev/dri/card0
[ 90.036] (WW) Falling back to old probe method for fbdev
[ 90.036] (II) Loading sub module "fbdevhw"
[ 90.036] (II) LoadModule: "fbdevhw"
[ 90.036] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 90.051] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 90.051] compiled for 1.19.6, module version = 0.0.2
[ 90.051] ABI class: X.Org Video Driver, version 23.0
[ 90.052] (WW) Falling back to old probe method for vesa
[ 90.052] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 90.052] (II) modeset(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 90.052] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 90.052] (==) modeset(0): RGB weight 888
[ 90.052] (==) modeset(0): Default visual is TrueColor
[ 90.052] (II) Loading sub module "glamoregl"
[ 90.052] (II) LoadModule: "glamoregl"
[ 90.052] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 90.145] (II) Module glamoregl: vendor="X.Org Foundation"
[ 90.146] compiled for 1.19.6, module version = 1.0.0
[ 90.146] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.146] (II) glamor: OpenGL accelerated X.org driver based.
[ 90.441] (II) glamor: EGL version 1.4 (DRI2):
[ 90.520] (II) modeset(0): glamor initialized
[ 90.521] (II) modeset(0): Output LVDS-1 has no monitor section
[ 90.526] (II) modeset(0): Output VGA-1 has no monitor section
[ 90.534] (II) modeset(0): Output HDMI-1 has no monitor section
[ 90.534] (II) modeset(0): Output DP-1 has no monitor section
[ 90.534] (II) modeset(0): EDID for output LVDS-1
[ 90.534] (II) modeset(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 90.534] (II) modeset(0): Year: 2009 Week: 0
[ 90.534] (II) modeset(0): EDID Version: 1.3
[ 90.534] (II) modeset(0): Digital Display Input
[ 90.534] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 90.534] (II) modeset(0): Gamma: 2.20
[ 90.534] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 90.534] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 90.534] (II) modeset(0): First detailed timing is preferred mode
[ 90.534] (II) modeset(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY:
0.570
[ 90.534] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY:
0.329
[ 90.534] (II) modeset(0): Manufacturer's mask: 0
[ 90.534] (II) modeset(0): Supported detailed timing:
[ 90.534] (II) modeset(0): clock: 75.2 MHz Image Size: 344 x 194 mm
[ 90.534] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446
h_blank_end 1558 h_border: 0
[ 90.535] (II) modeset(0): v_active: 768 v_sync: 770 v_sync_end 775
v_blanking: 804 v_border: 0
[ 90.535] (II) modeset(0): Supported detailed timing:
[ 90.535] (II) modeset(0): clock: 58.3 MHz Image Size: 344 x 194 mm
[ 90.535] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446
h_blank_end 1477 h_border: 0
[ 90.535] (II) modeset(0): v_active: 768 v_sync: 770 v_sync_end 775
v_blanking: 790 v_border: 0
[ 90.535] (II) modeset(0): Unknown vendor-specific block f
[ 90.535] (II) modeset(0): LTN156AT05J08
[ 90.535] (II) modeset(0): EDID (in hex):
[ 90.535] (II) modeset(0): 00ffffffffffff0030aeb04000000000
[ 90.535] (II) modeset(0): 0013010380221378eac8959e57549226
[ 90.535] (II) modeset(0): 0f505400000001010101010101010101
[ 90.535] (II) modeset(0): 0101010101015c1d56c0500024303020
[ 90.535] (II) modeset(0): 250058c210000019ca16566f50001630
[ 90.535] (II) modeset(0): 3020250058c2100000190000000f008c
[ 90.535] (II) modeset(0): 09328c09281609004ca34154000000fe
[ 90.535] (II) modeset(0): 004c544e313536415430354a303800a1
[ 90.535] (II) modeset(0): Printing probed modes for output LVDS-1
[ 90.535] (II) modeset(0): Modeline "1366x768"x60.0 75.16 1366 1414 1446
1558 768 770 775 804 -hsync -vsync (48.2 kHz eP)
[ 90.535] (II) modeset(0): Modeline "1366x768"x50.0 58.34 1366 1414 1446
1477 768 770 775 790 -hsync -vsync (39.5 kHz e)
[ 90.535] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568
1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 90.535] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440
1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 90.535] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212
1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 90.535] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 90.535] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128
1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 90.535] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088
1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 90.535] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060
1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 90.535] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000
1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 90.535] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000
1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 90.535] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928
1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 90.535] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 90.535] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 90.535] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980
1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 90.535] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920
525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 90.535] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832
512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 90.535] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940
525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 90.535] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844
512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 90.535] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952
450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 90.535] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900
480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 90.535] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 90.535] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888
384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 90.535] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760
384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 90.535] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760
432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 90.535] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672
384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 90.535] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528
300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 90.535] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512
300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 90.535] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400
240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 90.540] (II) modeset(0): EDID for output VGA-1
[ 90.549] (II) modeset(0): EDID for output HDMI-1
[ 90.549] (II) modeset(0): EDID for output DP-1
[ 90.549] (II) modeset(0): Output LVDS-1 connected
[ 90.549] (II) modeset(0): Output VGA-1 disconnected
[ 90.549] (II) modeset(0): Output HDMI-1 disconnected
[ 90.549] (II) modeset(0): Output DP-1 disconnected
[ 90.549] (II) modeset(0): Using exact sizes for initial modes
[ 90.549] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 90.549] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 90.549] (==) modeset(0): DPI set to (96, 96)
[ 90.549] (II) Loading sub module "fb"
[ 90.549] (II) LoadModule: "fb"
[ 90.549] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 90.562] (II) Module fb: vendor="X.Org Foundation"
[ 90.562] compiled for 1.19.6, module version = 1.0.0
[ 90.562] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.562] (II) UnloadModule: "fbdev"
[ 90.562] (II) Unloading fbdev
[ 90.562] (II) UnloadSubModule: "fbdevhw"
[ 90.562] (II) Unloading fbdevhw
[ 90.562] (II) UnloadModule: "vesa"
[ 90.562] (II) Unloading vesa
[ 90.562] (==) Depth 24 pixmap format is 32 bpp
[ 90.713] (==) modeset(0): Backing store enabled
[ 90.713] (==) modeset(0): Silken mouse enabled
[ 90.730] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 90.751] (==) modeset(0): DPMS enabled
[ 90.751] (II) modeset(0): [DRI2] Setup complete
[ 90.751] (II) modeset(0): [DRI2] DRI driver: i965
[ 90.751] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 90.751] (--) RandR disabled
[ 90.769] (II) SELinux: Disabled on system
[ 90.778] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 90.778] (II) AIGLX: enabled GLX_ARB_create_context
[ 90.778] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 90.778] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 90.778] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 90.778] (II) AIGLX: enabled GLX_SGI_swap_control
[ 90.778] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 90.778] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 90.778] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 90.778] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 90.779] (II) AIGLX: Loaded and initialized i965
[ 90.779] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 90.797] (II) modeset(0): Damage tracking initialized
[ 90.797] (II) modeset(0): Setting screen physical size to 361 x 203
[ 91.164] (II) Using input driver 'synaptics' for 'Touchpad'
[ 91.164] (**) Touchpad: always reports core events
[ 91.164] (**) Option "Protocol" "auto-dev"
[ 91.164] (EE) synaptics: Touchpad: no synaptics event device found
[ 91.164] (EE) synaptics: Touchpad: Synaptics driver unable to detect
protocol
[ 91.164] (EE) PreInit returned 11 for "Touchpad"
[ 91.164] (II) UnloadModule: "synaptics"
[ 91.177] (II) config/udev: Adding input device Power Button
(/dev/input/event6)
[ 91.178] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 91.178] (II) LoadModule: "evdev"
[ 91.178] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 91.197] (II) Module evdev: vendor="X.Org Foundation"
[ 91.197] compiled for 1.19.1, module version = 2.10.5
[ 91.197] Module class: X.Org XInput Driver
[ 91.197] ABI class: X.Org XInput driver, version 24.1
[ 91.197] (II) Using input driver 'evdev' for 'Power Button'
[ 91.198] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 20
paused 0
[ 91.198] (**) Power Button: always reports core events
[ 91.198] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 91.199] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 91.199] (--) evdev: Power Button: Found keys
[ 91.199] (II) evdev: Power Button: Configuring as keyboard
[ 91.199] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 91.199] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 91.199] (**) Option "xkb_rules" "evdev"
[ 91.199] (**) Option "xkb_model" "pc105"
[ 91.199] (**) Option "xkb_layout" "latam"
[ 91.273] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 91.274] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 91.274] (II) Using input driver 'evdev' for 'Video Bus'
[ 91.275] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 21
paused 0
[ 91.275] (**) Video Bus: always reports core events
[ 91.275] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 91.275] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 91.275] (--) evdev: Video Bus: Found keys
[ 91.275] (II) evdev: Video Bus: Configuring as keyboard
[ 91.275] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[ 91.275] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[ 91.275] (**) Option "xkb_rules" "evdev"
[ 91.275] (**) Option "xkb_model" "pc105"
[ 91.275] (**) Option "xkb_layout" "latam"
[ 91.277] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 91.277] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 91.277] (II) Using input driver 'evdev' for 'Power Button'
[ 91.278] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 22
paused 0
[ 91.278] (**) Power Button: always reports core events
[ 91.278] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 91.279] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 91.279] (--) evdev: Power Button: Found keys
[ 91.279] (II) evdev: Power Button: Configuring as keyboard
[ 91.279] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input4/event3"
[ 91.279] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 8)
[ 91.279] (**) Option "xkb_rules" "evdev"
[ 91.279] (**) Option "xkb_model" "pc105"
[ 91.279] (**) Option "xkb_layout" "latam"
[ 91.279] (II) config/udev: Adding input device Lid Switch
(/dev/input/event5)
[ 91.279] (II) No input driver specified, ignoring this device.
[ 91.279] (II) This device may have been added with another device file.
[ 91.280] (II) config/udev: Adding input device Sleep Button
(/dev/input/event4)
[ 91.280] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 91.280] (II) Using input driver 'evdev' for 'Sleep Button'
[ 91.282] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 23
paused 0
[ 91.282] (**) Sleep Button: always reports core events
[ 91.282] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 91.282] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 91.282] (--) evdev: Sleep Button: Found keys
[ 91.282] (II) evdev: Sleep Button: Configuring as keyboard
[ 91.282] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input5/event4"
[ 91.282] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD, id 9)
[ 91.282] (**) Option "xkb_rules" "evdev"
[ 91.282] (**) Option "xkb_model" "pc105"
[ 91.282] (**) Option "xkb_layout" "latam"
[ 91.284] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event10)
[ 91.284] (II) No input driver specified, ignoring this device.
[ 91.284] (II) This device may have been added with another device file.
[ 91.285] (II) config/udev: Adding input device HDA Intel MID Mic
(/dev/input/event11)
[ 91.285] (II) No input driver specified, ignoring this device.
[ 91.285] (II) This device may have been added with another device file.
[ 91.285] (II) config/udev: Adding input device HDA Intel MID Headphone
(/dev/input/event12)
[ 91.285] (II) No input driver specified, ignoring this device.
[ 91.285] (II) This device may have been added with another device file.
[ 91.286] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3
(/dev/input/event13)
[ 91.286] (II) No input driver specified, ignoring this device.
[ 91.286] (II) This device may have been added with another device file.
[ 91.286] (II) config/udev: Adding input device Genius Optical Mouse
(/dev/input/event1)
[ 91.287] (**) Genius Optical Mouse: Applying InputClass "evdev pointer
catchall"
[ 91.287] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 91.344] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24
paused 0
[ 91.345] (**) Genius Optical Mouse: always reports core events
[ 91.345] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event1"
[ 91.345] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 91.345] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 91.345] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 91.345] (--) evdev: Genius Optical Mouse: Found relative axes
[ 91.345] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 91.345] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 91.345] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 91.345] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 91.345] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 91.345] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0458:003A.0002/input/input16/event1"
[ 91.345] (II) XINPUT: Adding extended input device "Genius Optical Mouse"
(type: MOUSE, id 10)
[ 91.345] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 91.345] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 91.345] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 91.346] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 91.346] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 91.347] (II) config/udev: Adding input device Genius Optical Mouse
(/dev/input/mouse0)
[ 91.347] (II) No input driver specified, ignoring this device.
[ 91.347] (II) This device may have been added with another device file.
[ 91.348] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo
EasyC (/dev/input/event14)
[ 91.349] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "evdev
keyboard catchall"
[ 91.349] (II) Using input driver 'evdev' for 'Lenovo EasyCamera: Lenovo
EasyC'
[ 91.350] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 25
paused 0
[ 91.351] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[ 91.351] (**) evdev: Lenovo EasyCamera: Lenovo EasyC: Device:
"/dev/input/event14"
[ 91.351] (--) evdev: Lenovo EasyCamera: Lenovo EasyC: Vendor 0x4f2 Product
0xb1c1
[ 91.351] (--) evdev: Lenovo EasyCamera: Lenovo EasyC: Found keys
[ 91.351] (II) evdev: Lenovo EasyCamera: Lenovo EasyC: Configuring as
keyboard
[ 91.351] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15/event14"
[ 91.351] (II) XINPUT: Adding extended input device "Lenovo EasyCamera:
Lenovo EasyC" (type: KEYBOARD, id 11)
[ 91.351] (**) Option "xkb_rules" "evdev"
[ 91.351] (**) Option "xkb_model" "pc105"
[ 91.351] (**) Option "xkb_layout" "latam"
[ 91.353] (II) config/udev: Adding input device Ideapad extra buttons
(/dev/input/event7)
[ 91.353] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard
catchall"
[ 91.353] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 91.355] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 26
paused 0
[ 91.355] (**) Ideapad extra buttons: always reports core events
[ 91.355] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event7"
[ 91.355] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 91.355] (--) evdev: Ideapad extra buttons: Found keys
[ 91.355] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 91.355] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8/event7"
[ 91.355] (II) XINPUT: Adding extended input device "Ideapad extra buttons"
(type: KEYBOARD, id 12)
[ 91.355] (**) Option "xkb_rules" "evdev"
[ 91.355] (**) Option "xkb_model" "pc105"
[ 91.355] (**) Option "xkb_layout" "latam"
[ 91.356] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 91.356] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 91.356] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 91.357] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 27
paused 0
[ 91.357] (**) AT Translated Set 2 keyboard: always reports core events
[ 91.357] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 91.357] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 91.358] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 91.358] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 91.358] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 91.358] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 13)
[ 91.358] (**) Option "xkb_rules" "evdev"
[ 91.358] (**) Option "xkb_model" "pc105"
[ 91.358] (**) Option "xkb_layout" "latam"
[ 91.359] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad
(/dev/input/event2)
[ 91.359] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad
catchall"
[ 91.359] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad
catchall"
[ 91.359] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default
clickpad buttons"
[ 91.359] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 91.360] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 28
paused 0
[ 91.360] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 91.360] (**) Option "Device" "/dev/input/event2"
[ 91.360] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events
for semi-multitouch device
[ 91.360] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1408
(res 31)
[ 91.360] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 640
(res 31)
[ 91.360] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 91.360] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 91.360] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right
double triple
[ 91.360] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 91.360] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 91.360] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 91.360] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[ 91.360] (II) XINPUT: Adding extended input device "ETPS/2 Elantech
Touchpad" (type: TOUCHPAD, id 14)
[ 91.360] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now
constant deceleration 2.5
[ 91.360] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now
1.75
[ 91.360] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is
now 0.129
[ 91.361] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme
1
[ 91.361] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 91.361] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 91.361] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 91.361] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 91.361] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad
(/dev/input/mouse1)
[ 91.361] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass
"touchpad ignore duplicates"
[ 91.362] (II) config/udev: Adding input device PC Speaker
(/dev/input/event8)
[ 91.362] (II) No input driver specified, ignoring this device.
[ 91.362] (II) This device may have been added with another device file.
[ 91.362] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[ 91.362] (II) No input driver specified, ignoring this device.
[ 91.362] (II) This device may have been added with another device file.
[ 91.363] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[ 91.363] (II) No input driver specified, ignoring this device.
[ 91.363] (II) This device may have been added with another device file.
[ 91.363] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[ 91.363] (II) No input driver specified, ignoring this device.
[ 91.363] (II) This device may have been added with another device file.
[ 91.363] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[ 91.363] (II) No input driver specified, ignoring this device.
[ 91.363] (II) This device may have been added with another device file.
[ 91.363] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[ 91.363] (II) No input driver specified, ignoring this device.
[ 91.363] (II) This device may have been added with another device file.
[ 91.364] (II) config/udev: Adding input device (unnamed) (/dev/console)
[ 91.364] (II) No input driver specified, ignoring this device.
[ 91.364] (II) This device may have been added with another device file.
[ 91.364] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[ 91.364] (II) No input driver specified, ignoring this device.
[ 91.364] (II) This device may have been added with another device file.
[ 91.364] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[ 91.364] (II) No input driver specified, ignoring this device.
[ 91.364] (II) This device may have been added with another device file.
[ 91.364] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[ 91.364] (II) No input driver specified, ignoring this device.
[ 91.364] (II) This device may have been added with another device file.
[ 91.365] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[ 91.365] (II) No input driver specified, ignoring this device.
[ 91.365] (II) This device may have been added with another device file.
[ 91.365] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[ 91.365] (II) No input driver specified, ignoring this device.
[ 91.365] (II) This device may have been added with another device file.
[ 91.365] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[ 91.365] (II) No input driver specified, ignoring this device.
[ 91.365] (II) This device may have been added with another device file.
[ 91.365] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[ 91.365] (II) No input driver specified, ignoring this device.
[ 91.365] (II) This device may have been added with another device file.
[ 91.365] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[ 91.365] (II) No input driver specified, ignoring this device.
[ 91.365] (II) This device may have been added with another device file.
[ 91.366] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[ 91.366] (II) No input driver specified, ignoring this device.
[ 91.366] (II) This device may have been added with another device file.
[ 91.366] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[ 91.366] (II) No input driver specified, ignoring this device.
[ 91.366] (II) This device may have been added with another device file.
[ 91.366] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[ 91.366] (II) No input driver specified, ignoring this device.
[ 91.366] (II) This device may have been added with another device file.
[ 91.366] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[ 91.366] (II) No input driver specified, ignoring this device.
[ 91.366] (II) This device may have been added with another device file.
[ 91.366] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[ 91.367] (II) No input driver specified, ignoring this device.
[ 91.367] (II) This device may have been added with another device file.
[ 91.367] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[ 91.367] (II) No input driver specified, ignoring this device.
[ 91.367] (II) This device may have been added with another device file.
[ 91.367] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[ 91.367] (II) No input driver specified, ignoring this device.
[ 91.367] (II) This device may have been added with another device file.
[ 91.367] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[ 91.367] (II) No input driver specified, ignoring this device.
[ 91.367] (II) This device may have been added with another device file.
[ 91.367] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[ 91.367] (II) No input driver specified, ignoring this device.
[ 91.367] (II) This device may have been added with another device file.
[ 91.368] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[ 91.368] (II) No input driver specified, ignoring this device.
[ 91.368] (II) This device may have been added with another device file.
[ 91.368] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[ 91.368] (II) No input driver specified, ignoring this device.
[ 91.368] (II) This device may have been added with another device file.
[ 91.368] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[ 91.368] (II) No input driver specified, ignoring this device.
[ 91.368] (II) This device may have been added with another device file.
[ 91.368] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[ 91.368] (II) No input driver specified, ignoring this device.
[ 91.368] (II) This device may have been added with another device file.
[ 91.368] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[ 91.368] (II) No input driver specified, ignoring this device.
[ 91.368] (II) This device may have been added with another device file.
[ 91.368] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[ 91.368] (II) No input driver specified, ignoring this device.
[ 91.368] (II) This device may have been added with another device file.
[ 91.369] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[ 91.369] (II) No input driver specified, ignoring this device.
[ 91.369] (II) This device may have been added with another device file.
[ 91.369] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[ 91.369] (II) No input driver specified, ignoring this device.
[ 91.369] (II) This device may have been added with another device file.
[ 91.369] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[ 91.369] (II) No input driver specified, ignoring this device.
[ 91.369] (II) This device may have been added with another device file.
[ 91.369] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[ 91.369] (II) No input driver specified, ignoring this device.
[ 91.369] (II) This device may have been added with another device file.
[ 91.369] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[ 91.369] (II) No input driver specified, ignoring this device.
[ 91.369] (II) This device may have been added with another device file.
[ 91.369] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[ 91.369] (II) No input driver specified, ignoring this device.
[ 91.369] (II) This device may have been added with another device file.
[ 91.370] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[ 91.370] (II) No input driver specified, ignoring this device.
[ 91.370] (II) This device may have been added with another device file.
[ 91.370] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[ 91.370] (II) No input driver specified, ignoring this device.
[ 91.370] (II) This device may have been added with another device file.
[ 91.370] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[ 91.370] (II) No input driver specified, ignoring this device.
[ 91.370] (II) This device may have been added with another device file.
[ 91.370] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[ 91.370] (II) No input driver specified, ignoring this device.
[ 91.370] (II) This device may have been added with another device file.
[ 91.370] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[ 91.370] (II) No input driver specified, ignoring this device.
[ 91.370] (II) This device may have been added with another device file.
[ 91.370] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[ 91.370] (II) No input driver specified, ignoring this device.
[ 91.371] (II) This device may have been added with another device file.
[ 91.371] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[ 91.371] (II) No input driver specified, ignoring this device.
[ 91.371] (II) This device may have been added with another device file.
[ 91.371] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[ 91.371] (II) No input driver specified, ignoring this device.
[ 91.371] (II) This device may have been added with another device file.
[ 91.371] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[ 91.371] (II) No input driver specified, ignoring this device.
[ 91.371] (II) This device may have been added with another device file.
[ 91.371] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[ 91.371] (II) No input driver specified, ignoring this device.
[ 91.371] (II) This device may have been added with another device file.
[ 91.371] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[ 91.371] (II) No input driver specified, ignoring this device.
[ 91.371] (II) This device may have been added with another device file.
[ 91.371] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[ 91.372] (II) No input driver specified, ignoring this device.
[ 91.372] (II) This device may have been added with another device file.
[ 91.372] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[ 91.372] (II) No input driver specified, ignoring this device.
[ 91.372] (II) This device may have been added with another device file.
[ 91.372] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[ 91.372] (II) No input driver specified, ignoring this device.
[ 91.372] (II) This device may have been added with another device file.
[ 91.372] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[ 91.372] (II) No input driver specified, ignoring this device.
[ 91.372] (II) This device may have been added with another device file.
[ 91.372] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[ 91.372] (II) No input driver specified, ignoring this device.
[ 91.372] (II) This device may have been added with another device file.
[ 91.372] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[ 91.372] (II) No input driver specified, ignoring this device.
[ 91.372] (II) This device may have been added with another device file.
[ 91.373] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[ 91.373] (II) No input driver specified, ignoring this device.
[ 91.373] (II) This device may have been added with another device file.
[ 91.373] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[ 91.373] (II) No input driver specified, ignoring this device.
[ 91.373] (II) This device may have been added with another device file.
[ 91.373] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[ 91.373] (II) No input driver specified, ignoring this device.
[ 91.373] (II) This device may have been added with another device file.
[ 91.373] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[ 91.373] (II) No input driver specified, ignoring this device.
[ 91.373] (II) This device may have been added with another device file.
[ 91.373] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[ 91.373] (II) No input driver specified, ignoring this device.
[ 91.373] (II) This device may have been added with another device file.
[ 91.373] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[ 91.373] (II) No input driver specified, ignoring this device.
[ 91.373] (II) This device may have been added with another device file.
[ 91.374] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[ 91.374] (II) No input driver specified, ignoring this device.
[ 91.374] (II) This device may have been added with another device file.
[ 91.374] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[ 91.374] (II) No input driver specified, ignoring this device.
[ 91.374] (II) This device may have been added with another device file.
[ 91.374] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[ 91.374] (II) No input driver specified, ignoring this device.
[ 91.374] (II) This device may have been added with another device file.
[ 91.374] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[ 91.374] (II) No input driver specified, ignoring this device.
[ 91.374] (II) This device may have been added with another device file.
[ 91.374] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[ 91.374] (II) No input driver specified, ignoring this device.
[ 91.374] (II) This device may have been added with another device file.
[ 91.374] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[ 91.374] (II) No input driver specified, ignoring this device.
[ 91.374] (II) This device may have been added with another device file.
[ 91.375] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[ 91.375] (II) No input driver specified, ignoring this device.
[ 91.375] (II) This device may have been added with another device file.
[ 91.375] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[ 91.375] (II) No input driver specified, ignoring this device.
[ 91.375] (II) This device may have been added with another device file.
[ 91.375] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[ 91.375] (II) No input driver specified, ignoring this device.
[ 91.375] (II) This device may have been added with another device file.
[ 91.375] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[ 91.375] (II) No input driver specified, ignoring this device.
[ 91.375] (II) This device may have been added with another device file.
[ 91.375] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[ 91.375] (II) No input driver specified, ignoring this device.
[ 91.375] (II) This device may have been added with another device file.
[ 91.375] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[ 91.375] (II) No input driver specified, ignoring this device.
[ 91.376] (II) This device may have been added with another device file.
[ 91.376] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[ 91.376] (II) No input driver specified, ignoring this device.
[ 91.376] (II) This device may have been added with another device file.
[ 91.376] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[ 91.376] (II) No input driver specified, ignoring this device.
[ 91.376] (II) This device may have been added with another device file.
[ 95.698] (II) modeset(0): EDID vendor "LEN", prod id 16560
[ 95.698] (II) modeset(0): Printing DDC gathered Modelines:
[ 95.698] (II) modeset(0): Modeline "1366x768"x0.0 75.16 1366 1414 1446
1558 768 770 775 804 -hsync -vsync (48.2 kHz eP)
[ 95.698] (II) modeset(0): Modeline "1366x768"x0.0 58.34 1366 1414 1446
1477 768 770 775 790 -hsync -vsync (39.5 kHz e)
[ 97.364] (II) modeset(0): EDID vendor "LEN", prod id 16560
[ 97.364] (II) modeset(0): Printing DDC gathered Modelines:
[ 97.364] (II) modeset(0): Modeline "1366x768"x0.0 75.16 1366 1414 1446
1558 768 770 775 804 -hsync -vsync (48.2 kHz eP)
[ 97.364] (II) modeset(0): Modeline "1366x768"x0.0 58.34 1366 1414 1446
1477 768 770 775 790 -hsync -vsync (39.5 kHz e)
[ 97.903] (II) modeset(0): EDID vendor "LEN", prod id 16560
[ 97.903] (II) modeset(0): Printing DDC gathered Modelines:
[ 97.903] (II) modeset(0): Modeline "1366x768"x0.0 75.16 1366 1414 1446
1558 768 770 775 804 -hsync -vsync (48.2 kHz eP)
[ 97.903] (II) modeset(0): Modeline "1366x768"x0.0 58.34 1366 1414 1446
1477 768 770 775 790 -hsync -vsync (39.5 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=9859210
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10493595
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=10520460
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10553779
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input4
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=9856565
P:
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0C:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10431683
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0D:00/input/input6
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0D:00/input/input6
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=9859807
P:
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0D:00/input/input6/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0D:00/input/input6/event5
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=reliable
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10461826
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input5
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=9858437
P:
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input5/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/PNP0C0E:00/input/input5/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10469418
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v14F1p5069e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#1/beep0"
E: PRODUCT=1/14f1/5069/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=10549380
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10569636
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel MID Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=10561463
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10581668
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel MID Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=10570696
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10601726
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel MID HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=10582812
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10617506
P:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0458:003A.0002/input/input16
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0458:003A.0002/input/input16
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_1_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Optical_Mouse
E: ID_MODEL_ENC=Optical\x20Mouse
E: ID_MODEL_ID=003a
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Genius_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Genius
E: ID_VENDOR_ENC=Genius
E: ID_VENDOR_ID=0458
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v0458p003Ae0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Genius Optical Mouse"
E: PHYS="usb-0000:00:1d.0-1.1/input0"
E: PRODUCT=3/458/3a/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=86725844
P:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0458:003A.0002/input/input16/event1
N: input/event1
S: input/by-id/usb-Genius_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-event-mouse
/dev/input/by-id/usb-Genius_Optical_Mouse-event-mouse
E: DEVNAME=/dev/input/event1
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0458:003A.0002/input/input16/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Optical_Mouse
E: ID_MODEL_ENC=Optical\x20Mouse
E: ID_MODEL_ID=003a
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Genius_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Genius
E: ID_VENDOR_ENC=Genius
E: ID_VENDOR_ID=0458
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=86809185
P:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0458:003A.0002/input/input16/mouse0
N: input/mouse0
S: input/by-id/usb-Genius_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-mouse
/dev/input/by-id/usb-Genius_Optical_Mouse-mouse
E: DEVNAME=/dev/input/mouse0
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0458:003A.0002/input/input16/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Optical_Mouse
E: ID_MODEL_ENC=Optical\x20Mouse
E: ID_MODEL_ID=003a
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Genius_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Genius
E: ID_VENDOR_ENC=Genius
E: ID_VENDOR_ID=0458
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=86728565
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Lenovo_EasyCamera
E: ID_MODEL_ENC=Lenovo\x20EasyCamera
E: ID_MODEL_ID=b1c1
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_0
E: ID_REVISION=2507
E: ID_SERIAL=Chicony_Corp._Lenovo_EasyCamera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Corp.
E: ID_VENDOR_ENC=Chicony\x20Corp.
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB1C1e2507-e0,1,kD4,ramlsfw
E: NAME="Lenovo EasyCamera: Lenovo EasyC"
E: PHYS="usb-0000:00:1d.0-1.3/button"
E: PRODUCT=3/4f2/b1c1/2507
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=11593333
P:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15/event14
N: input/event14
S: input/by-id/usb-Chicony_Corp._Lenovo_EasyCamera-event-if00
S: input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Chicony_Corp._Lenovo_EasyCamera-event-if00
/dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event
E: DEVNAME=/dev/input/event14
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15/event14
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Lenovo_EasyCamera
E: ID_MODEL_ENC=Lenovo\x20EasyCamera
E: ID_MODEL_ID=b1c1
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_0
E: ID_REVISION=2507
E: ID_SERIAL=Chicony_Corp._Lenovo_EasyCamera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Corp.
E: ID_VENDOR_ENC=Chicony\x20Corp.
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=11626476
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
E: EV=13
E: ID_FOR_SEAT=input-pci-0000_00_1f_0-platform-VPC2004_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1f.0-platform-VPC2004:00
E: ID_PATH_TAG=pci-0000_00_1f_0-platform-VPC2004_00
E: KEY=81000800100c03 4400000000300000 0 2
E:
MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k94,95,BA,BE,C0,C1,CA,CB,D4,E3,F0,F7,ram4,lsfw
E: MSC=10
E: NAME="Ideapad extra buttons"
E: PHYS="ideapad/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=10155497
P: /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8/event7
N: input/event7
S: input/by-path/pci-0000:00:1f.0-platform-VPC2004:00-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1f.0-platform-VPC2004:00-event
E: DEVNAME=/dev/input/event7
E:
DEVPATH=/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1f.0-platform-VPC2004:00
E: ID_PATH_TAG=pci-0000_00_1f_0-platform-VPC2004_00
E: KEYBOARD_KEY_08=f20
E: KEYBOARD_KEY_0d=rfkill
E: KEYBOARD_KEY_42=f23
E: KEYBOARD_KEY_43=f22
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10501800
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E:
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1403569
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: LIBINPUT_ATTR_KEYBOARD_INTEGRATION=internal
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=10431292
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input2
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input2
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e420 30000 0 0 0 0
E:
MODALIAS=input:b0011v0002p000Ee0000-e0,1,3,k110,111,145,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="ETPS/2 Elantech Touchpad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/e/0
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=9777197
P: /devices/platform/i8042/serio1/input/input2/event2
N: input/event2
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event2
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=20
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=45
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: LIBINPUT_ATTR_PRESSURE_RANGE=10:8
E: LIBINPUT_ATTR_RESOLUTION_HINT=31x31
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10715244
P: /devices/platform/i8042/serio1/input/input2/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9836322
P: /devices/platform/pcspkr/input/input9
E: DEVPATH=/devices/platform/pcspkr/input/input9
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=9886359
P: /devices/platform/pcspkr/input/input9/event8
N: input/event8
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/pcspkr/input/input9/event8
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10517579
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.14.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8),
LANGUAGE=es_AR:es (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.27-2
ii libdrm-intel1 2.4.91-2
ii libdrm2 2.4.91-2
ii libpciaccess0 0.13.4-1+b2
ii libpixman-1-0 0.34.0-2
ii libudev1 238-2
ii libx11-6 2:1.6.4-3
ii libx11-xcb1 2:1.6.4-3
ii libxcb-dri2-0 1.13-1
ii libxcb-dri3-0 1.13-1
ii libxcb-sync1 1.13-1
ii libxcb-util0 0.3.8-3+b2
ii libxcb1 1.13-1
ii libxcursor1 1:1.1.15-1
ii libxdamage1 1:1.1.4-3
ii libxext6 2:1.3.3-1+b2
ii libxfixes3 1:5.0.3-1
ii libxinerama1 2:1.1.3-1+b3
ii libxrandr2 2:1.5.1-1
ii libxrender1 1:0.9.10-1
ii libxshmfence1 1.2-1+b2
ii libxss1 1:1.2.2-1+b2
ii libxtst6 2:1.2.3-1
ii libxv1 2:1.0.11-1
ii libxvmc1 2:1.0.10-1
ii xserver-xorg-core [xorg-video-abi-23] 2:1.19.6-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
