Package: xserver-xorg-video-intel Version: 2:2.99.917+git20161105-1~bpo8+1 Severity: normal
Dear Maintainer, After upgrading to 2:2.99.917+git20161105-1~bpo8+1 from jessie-backports, I have seen some windows fail to draw updates correctly. The window shows old state, even though the software is otherwise actually in the expected state. This is on a mid-2016 Dell XPS 13 Developer Edition. The issue I can reproduce most reliably is in the Thunderbird compose window. If I jump to the beginning or end of the message body with Ctrl+Home or Ctrl+End, only a very small part of the compose window appears to update. Otherwise, it continues to show its original location. I have to hide and re-render the window (I usually use Ctrl+` in GNOME) to fix it. Sometimes in Emacs (running under X) while I'm typing, a character will fail to render. Usually moving the cursor on the same line (e.g., Ctrl+A, Alt+B) will cause it to draw. Ctrl+L always will too. Sometimes in GNOME Terminal running screen, when I switch screens, the new screen does not render. Again, a couple of Ctrl+L usually fixes it. The issue is disruptive enough that I have downgraded back to the previous backport. -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Aug 22 22:05 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2401376 Feb 10 2015 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:1926] (rev 0a) /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: --------------------------------- total 0 /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 4.9.0 (root@shelley) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Sat Dec 17 11:19:20 EST 2016 Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 12.992] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 12.992] X Protocol Version 11, Revision 0 [ 12.992] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 12.992] Current Operating System: Linux shelley 4.9.0 #1 SMP Sat Dec 17 11:19:20 EST 2016 x86_64 [ 12.992] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0 root=/dev/mapper/shelley-root ro quiet [ 12.992] Build Date: 11 February 2015 12:32:02AM [ 12.992] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 12.992] Current version of pixman: 0.32.6 [ 12.992] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.992] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.992] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 17 12:59:01 2016 [ 12.999] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.999] (==) No Layout section. Using the first Screen section. [ 12.999] (==) No screen section available. Using defaults. [ 12.999] (**) |-->Screen "Default Screen Section" (0) [ 12.999] (**) | |-->Monitor "<default monitor>" [ 13.000] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 13.000] (==) Automatically adding devices [ 13.000] (==) Automatically enabling devices [ 13.000] (==) Automatically adding GPU devices [ 13.012] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 13.012] Entry deleted from font path. [ 13.020] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 13.020] (==) ModulePath set to "/usr/lib/xorg/modules" [ 13.020] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 13.021] (II) Loader magic: 0x5571581a7d80 [ 13.021] (II) Module ABI versions: [ 13.021] X.Org ANSI C Emulation: 0.4 [ 13.021] X.Org Video Driver: 18.0 [ 13.021] X.Org XInput driver : 21.0 [ 13.021] X.Org Server Extension : 8.0 [ 13.022] (II) xfree86: Adding drm device (/dev/dri/card0) [ 13.073] (--) PCI:*(0:0:2:0) 8086:1926:1028:0704 rev 10, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ 13.075] (II) LoadModule: "glx" [ 13.077] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 13.084] (II) Module glx: vendor="X.Org Foundation" [ 13.084] compiled for 1.16.4, module version = 1.0.0 [ 13.084] ABI class: X.Org Server Extension, version 8.0 [ 13.084] (==) AIGLX enabled [ 13.084] (==) Matched intel as autoconfigured driver 0 [ 13.084] (==) Matched intel as autoconfigured driver 1 [ 13.084] (==) Matched modesetting as autoconfigured driver 2 [ 13.084] (==) Matched fbdev as autoconfigured driver 3 [ 13.084] (==) Matched vesa as autoconfigured driver 4 [ 13.084] (==) Assigned the driver to the xf86ConfigLayout [ 13.084] (II) LoadModule: "intel" [ 13.084] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 13.089] (II) Module intel: vendor="X.Org Foundation" [ 13.089] compiled for 1.16.4, module version = 2.99.917 [ 13.089] Module class: X.Org Video Driver [ 13.089] ABI class: X.Org Video Driver, version 18.0 [ 13.089] (II) LoadModule: "modesetting" [ 13.089] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 13.089] (II) Module modesetting: vendor="X.Org Foundation" [ 13.090] compiled for 1.16.4, module version = 0.9.0 [ 13.090] Module class: X.Org Video Driver [ 13.090] ABI class: X.Org Video Driver, version 18.0 [ 13.090] (II) LoadModule: "fbdev" [ 13.090] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 13.090] (II) Module fbdev: vendor="X.Org Foundation" [ 13.090] compiled for 1.15.99.904, module version = 0.4.4 [ 13.090] Module class: X.Org Video Driver [ 13.090] ABI class: X.Org Video Driver, version 18.0 [ 13.090] (II) LoadModule: "vesa" [ 13.090] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 13.091] (II) Module vesa: vendor="X.Org Foundation" [ 13.091] compiled for 1.15.99.904, module version = 2.3.3 [ 13.091] Module class: X.Org Video Driver [ 13.091] ABI class: X.Org Video Driver, version 18.0 [ 13.091] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 13.091] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 13.091] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 13.091] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 13.091] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 13.091] (II) FBDEV: driver for framebuffer: fbdev [ 13.091] (II) VESA: driver for VESA chipsets: vesa [ 13.091] (++) using VT number 7 [ 13.113] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919 [ 13.113] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161105-1~bpo8+1 (Vincent Cheng <vch...@debian.org>) [ 13.113] (II) intel(0): SNA compiled for use with valgrind [ 13.114] (WW) Falling back to old probe method for modesetting [ 13.114] (WW) Falling back to old probe method for fbdev [ 13.114] (II) Loading sub module "fbdevhw" [ 13.114] (II) LoadModule: "fbdevhw" [ 13.114] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 13.116] (II) Module fbdevhw: vendor="X.Org Foundation" [ 13.116] compiled for 1.16.4, module version = 0.0.2 [ 13.116] ABI class: X.Org Video Driver, version 18.0 [ 13.116] (WW) Falling back to old probe method for vesa [ 13.118] (--) intel(0): gen9 engineering sample [ 13.118] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads [ 13.118] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 13.118] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 13.118] (==) intel(0): RGB weight 888 [ 13.118] (==) intel(0): Default visual is TrueColor [ 13.119] (II) intel(0): Output eDP1 has no monitor section [ 13.145] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1 [ 13.145] (II) intel(0): Enabled output eDP1 [ 13.145] (II) intel(0): Output DP1 has no monitor section [ 13.145] (II) intel(0): Enabled output DP1 [ 13.145] (II) intel(0): Output HDMI1 has no monitor section [ 13.145] (II) intel(0): Enabled output HDMI1 [ 13.145] (II) intel(0): Output DP2 has no monitor section [ 13.145] (II) intel(0): Enabled output DP2 [ 13.145] (II) intel(0): Output HDMI2 has no monitor section [ 13.146] (II) intel(0): Enabled output HDMI2 [ 13.146] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 13.146] (II) intel(0): Output VIRTUAL1 has no monitor section [ 13.146] (II) intel(0): Enabled output VIRTUAL1 [ 13.146] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0 [ 13.146] (==) intel(0): TearFree disabled [ 13.146] (==) intel(0): DPI set to (96, 96) [ 13.146] (II) Loading sub module "dri3" [ 13.146] (II) LoadModule: "dri3" [ 13.146] (II) Module "dri3" already built-in [ 13.146] (II) Loading sub module "dri2" [ 13.146] (II) LoadModule: "dri2" [ 13.146] (II) Module "dri2" already built-in [ 13.146] (II) Loading sub module "present" [ 13.146] (II) LoadModule: "present" [ 13.146] (II) Module "present" already built-in [ 13.151] (II) UnloadModule: "modesetting" [ 13.151] (II) Unloading modesetting [ 13.151] (II) UnloadModule: "fbdev" [ 13.151] (II) Unloading fbdev [ 13.151] (II) UnloadSubModule: "fbdevhw" [ 13.151] (II) Unloading fbdevhw [ 13.151] (II) UnloadModule: "vesa" [ 13.151] (II) Unloading vesa [ 13.151] (==) Depth 24 pixmap format is 32 bpp [ 13.156] (II) intel(0): SNA initialized with Skylake (gen9) backend [ 13.156] (==) intel(0): Backing store enabled [ 13.156] (==) intel(0): Silken mouse enabled [ 13.157] (II) intel(0): HW Cursor enabled [ 13.157] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 13.157] (==) intel(0): DPMS enabled [ 13.157] (==) intel(0): Display hotplug detection enabled [ 13.158] (II) intel(0): [DRI2] Setup complete [ 13.158] (II) intel(0): [DRI2] DRI driver: i965 [ 13.158] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 13.158] (II) intel(0): direct rendering: DRI2 enabled [ 13.158] (II) intel(0): hardware support for Present enabled [ 13.158] (--) RandR disabled [ 13.167] (II) SELinux: Disabled on system [ 13.193] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 13.193] (II) AIGLX: enabled GLX_ARB_create_context [ 13.193] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 13.193] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 13.193] (II) AIGLX: enabled GLX_INTEL_swap_event [ 13.193] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 13.193] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 13.193] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 13.193] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 13.193] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 13.193] (II) AIGLX: Loaded and initialized i965 [ 13.193] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 13.204] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 13.217] (II) intel(0): Setting screen physical size to 846 x 476 [ 13.279] (II) config/udev: Adding input device Power Button (/dev/input/event8) [ 13.279] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 13.279] (II) LoadModule: "evdev" [ 13.279] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 13.284] (II) Module evdev: vendor="X.Org Foundation" [ 13.284] compiled for 1.16.0, module version = 2.9.0 [ 13.284] Module class: X.Org XInput Driver [ 13.284] ABI class: X.Org XInput driver, version 21.0 [ 13.284] (II) Using input driver 'evdev' for 'Power Button' [ 13.284] (**) Power Button: always reports core events [ 13.284] (**) evdev: Power Button: Device: "/dev/input/event8" [ 13.284] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 13.284] (--) evdev: Power Button: Found keys [ 13.284] (II) evdev: Power Button: Configuring as keyboard [ 13.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8" [ 13.284] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 13.284] (**) Option "xkb_rules" "evdev" [ 13.285] (**) Option "xkb_model" "pc105" [ 13.285] (**) Option "xkb_layout" "us" [ 13.285] (II) config/udev: Adding input device Video Bus (/dev/input/event10) [ 13.285] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 13.285] (II) Using input driver 'evdev' for 'Video Bus' [ 13.285] (**) Video Bus: always reports core events [ 13.285] (**) evdev: Video Bus: Device: "/dev/input/event10" [ 13.285] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 13.285] (--) evdev: Video Bus: Found keys [ 13.285] (II) evdev: Video Bus: Configuring as keyboard [ 13.285] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10" [ 13.285] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 13.285] (**) Option "xkb_rules" "evdev" [ 13.285] (**) Option "xkb_model" "pc105" [ 13.285] (**) Option "xkb_layout" "us" [ 13.285] (II) config/udev: Adding input device Power Button (/dev/input/event6) [ 13.285] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 13.285] (II) Using input driver 'evdev' for 'Power Button' [ 13.285] (**) Power Button: always reports core events [ 13.285] (**) evdev: Power Button: Device: "/dev/input/event6" [ 13.285] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 13.285] (--) evdev: Power Button: Found keys [ 13.285] (II) evdev: Power Button: Configuring as keyboard [ 13.285] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6" [ 13.285] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 13.285] (**) Option "xkb_rules" "evdev" [ 13.286] (**) Option "xkb_model" "pc105" [ 13.286] (**) Option "xkb_layout" "us" [ 13.286] (II) config/udev: Adding input device Lid Switch (/dev/input/event5) [ 13.286] (II) No input driver specified, ignoring this device. [ 13.286] (II) This device may have been added with another device file. [ 13.286] (II) config/udev: Adding input device Sleep Button (/dev/input/event7) [ 13.286] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 13.286] (II) Using input driver 'evdev' for 'Sleep Button' [ 13.286] (**) Sleep Button: always reports core events [ 13.286] (**) evdev: Sleep Button: Device: "/dev/input/event7" [ 13.286] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 13.286] (--) evdev: Sleep Button: Found keys [ 13.286] (II) evdev: Sleep Button: Configuring as keyboard [ 13.286] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event7" [ 13.286] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 13.286] (**) Option "xkb_rules" "evdev" [ 13.286] (**) Option "xkb_model" "pc105" [ 13.286] (**) Option "xkb_layout" "us" [ 13.287] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/event2) [ 13.287] (**) Logitech Performance MX: Applying InputClass "evdev pointer catchall" [ 13.287] (II) Using input driver 'evdev' for 'Logitech Performance MX' [ 13.287] (**) Logitech Performance MX: always reports core events [ 13.287] (**) evdev: Logitech Performance MX: Device: "/dev/input/event2" [ 13.287] (--) evdev: Logitech Performance MX: Vendor 0x46d Product 0x101a [ 13.287] (--) evdev: Logitech Performance MX: Found 20 mouse buttons [ 13.287] (--) evdev: Logitech Performance MX: Found scroll wheel(s) [ 13.287] (--) evdev: Logitech Performance MX: Found relative axes [ 13.287] (--) evdev: Logitech Performance MX: Found x and y relative axes [ 13.287] (II) evdev: Logitech Performance MX: Configuring as mouse [ 13.287] (II) evdev: Logitech Performance MX: Adding scrollwheel support [ 13.287] (**) evdev: Logitech Performance MX: YAxisMapping: buttons 4 and 5 [ 13.287] (**) evdev: Logitech Performance MX: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 13.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:101A.0004/input/input3/event2" [ 13.287] (II) XINPUT: Adding extended input device "Logitech Performance MX" (type: MOUSE, id 10) [ 13.287] (II) evdev: Logitech Performance MX: initialized for relative axes. [ 13.287] (**) Logitech Performance MX: (accel) keeping acceleration scheme 1 [ 13.287] (**) Logitech Performance MX: (accel) acceleration profile 0 [ 13.287] (**) Logitech Performance MX: (accel) acceleration factor: 2.000 [ 13.287] (**) Logitech Performance MX: (accel) acceleration threshold: 4 [ 13.288] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/mouse1) [ 13.288] (II) No input driver specified, ignoring this device. [ 13.288] (II) This device may have been added with another device file. [ 13.292] (II) config/udev: Adding input device USB Keyboard (/dev/input/event3) [ 13.292] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 13.292] (II) Using input driver 'evdev' for 'USB Keyboard' [ 13.292] (**) USB Keyboard: always reports core events [ 13.292] (**) evdev: USB Keyboard: Device: "/dev/input/event3" [ 13.292] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169 [ 13.292] (--) evdev: USB Keyboard: Found keys [ 13.292] (II) evdev: USB Keyboard: Configuring as keyboard [ 13.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.0005/input/input4/event3" [ 13.292] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 11) [ 13.292] (**) Option "xkb_rules" "evdev" [ 13.292] (**) Option "xkb_model" "pc105" [ 13.292] (**) Option "xkb_layout" "us" [ 13.292] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4) [ 13.292] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 13.292] (II) Using input driver 'evdev' for 'USB Keyboard' [ 13.292] (**) USB Keyboard: always reports core events [ 13.292] (**) evdev: USB Keyboard: Device: "/dev/input/event4" [ 13.292] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169 [ 13.292] (--) evdev: USB Keyboard: Found keys [ 13.292] (II) evdev: USB Keyboard: Configuring as keyboard [ 13.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0006/input/input5/event4" [ 13.292] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 12) [ 13.292] (**) Option "xkb_rules" "evdev" [ 13.292] (**) Option "xkb_model" "pc105" [ 13.292] (**) Option "xkb_layout" "us" [ 13.293] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event9) [ 13.293] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall" [ 13.293] (II) Using input driver 'evdev' for 'ELAN Touchscreen' [ 13.293] (**) ELAN Touchscreen: always reports core events [ 13.293] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event9" [ 13.293] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x2234 [ 13.293] (--) evdev: ELAN Touchscreen: Found absolute axes [ 13.293] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes [ 13.293] (II) evdev: ELAN Touchscreen: No buttons found, faking one. [ 13.293] (--) evdev: ELAN Touchscreen: Found x and y absolute axes [ 13.293] (--) evdev: ELAN Touchscreen: Found absolute touchscreen [ 13.293] (II) evdev: ELAN Touchscreen: Configuring as touchscreen [ 13.293] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5 [ 13.293] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 13.293] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/event9" [ 13.293] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 13) [ 13.293] (II) evdev: ELAN Touchscreen: initialized for absolute axes. [ 13.293] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1 [ 13.293] (**) ELAN Touchscreen: (accel) acceleration profile 0 [ 13.293] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000 [ 13.293] (**) ELAN Touchscreen: (accel) acceleration threshold: 4 [ 13.293] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse2) [ 13.293] (II) No input driver specified, ignoring this device. [ 13.293] (II) This device may have been added with another device file. [ 13.294] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event11) [ 13.294] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall" [ 13.294] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD' [ 13.294] (**) Integrated_Webcam_HD: always reports core events [ 13.294] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event11" [ 13.294] (--) evdev: Integrated_Webcam_HD: Vendor 0xc45 Product 0x670c [ 13.294] (--) evdev: Integrated_Webcam_HD: Found keys [ 13.294] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard [ 13.294] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event11" [ 13.294] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 14) [ 13.294] (**) Option "xkb_rules" "evdev" [ 13.294] (**) Option "xkb_model" "pc105" [ 13.294] (**) Option "xkb_layout" "us" [ 13.294] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/event13) [ 13.294] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall" [ 13.294] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "touchpad catchall" [ 13.294] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "Default clickpad buttons" [ 13.294] (II) LoadModule: "synaptics" [ 13.294] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 13.295] (II) Module synaptics: vendor="X.Org Foundation" [ 13.295] compiled for 1.16.0.901, module version = 1.8.99 [ 13.295] Module class: X.Org XInput Driver [ 13.295] ABI class: X.Org XInput driver, version 21.0 [ 13.295] (II) Using input driver 'synaptics' for 'DLL0704:01 06CB:76AE Touchpad' [ 13.295] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events [ 13.295] (**) Option "Device" "/dev/input/event13" [ 13.332] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: found clickpad property [ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: x-axis range 0 - 1216 (res 12) [ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: y-axis range 0 - 680 (res 12) [ 13.332] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report pressure, will use touch data. [ 13.332] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report finger width. [ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: buttons: left double triple [ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: Vendor 0x6cb Product 0x76ae [ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid pressure range. defaulting to 0 - 255 [ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid finger width range. defaulting to 0 - 15 [ 13.332] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found [ 13.332] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events [ 13.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/event13" [ 13.372] (II) XINPUT: Adding extended input device "DLL0704:01 06CB:76AE Touchpad" (type: TOUCHPAD, id 15) [ 13.372] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 13.372] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MaxSpeed is now 1.75 [ 13.372] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) AccelFactor is now 0.144 [ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) keeping acceleration scheme 1 [ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration profile 1 [ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration factor: 2.000 [ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration threshold: 4 [ 13.372] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found [ 13.372] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/mouse3) [ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: Ignoring device from InputClass "touchpad ignore duplicates" [ 13.372] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14) [ 13.373] (II) No input driver specified, ignoring this device. [ 13.373] (II) This device may have been added with another device file. [ 13.373] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event15) [ 13.373] (II) No input driver specified, ignoring this device. [ 13.373] (II) This device may have been added with another device file. [ 13.373] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16) [ 13.373] (II) No input driver specified, ignoring this device. [ 13.373] (II) This device may have been added with another device file. [ 13.373] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17) [ 13.373] (II) No input driver specified, ignoring this device. [ 13.373] (II) This device may have been added with another device file. [ 13.373] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18) [ 13.373] (II) No input driver specified, ignoring this device. [ 13.373] (II) This device may have been added with another device file. [ 13.373] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 13.373] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 13.373] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 13.373] (**) AT Translated Set 2 keyboard: always reports core events [ 13.373] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 13.373] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 13.373] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 13.373] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 13.373] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 13.373] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16) [ 13.373] (**) Option "xkb_rules" "evdev" [ 13.373] (**) Option "xkb_model" "pc105" [ 13.373] (**) Option "xkb_layout" "us" [ 13.374] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 13.374] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 13.374] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 13.374] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 13.374] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 13.374] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 13.374] (**) Option "Device" "/dev/input/event1" [ 13.420] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property [ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 0) [ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1118 - 4734 (res 0) [ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple [ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 13.420] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 13.420] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 13.456] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [ 13.456] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17) [ 13.456] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 13.456] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 13.456] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035 [ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 13.456] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 13.456] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 13.456] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 13.456] (II) config/udev: Adding input device PC Speaker (/dev/input/event12) [ 13.456] (II) No input driver specified, ignoring this device. [ 13.456] (II) This device may have been added with another device file. [ 13.467] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18) [ 13.467] (II) No input driver specified, ignoring this device. [ 13.467] (II) This device may have been added with another device file. [ 13.467] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event15) [ 13.467] (II) No input driver specified, ignoring this device. [ 13.467] (II) This device may have been added with another device file. [ 13.467] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16) [ 13.467] (II) No input driver specified, ignoring this device. [ 13.467] (II) This device may have been added with another device file. [ 13.468] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17) [ 13.468] (II) No input driver specified, ignoring this device. [ 13.468] (II) This device may have been added with another device file. [ 13.900] (II) intel(0): EDID vendor "SHP", prod id 5194 [ 13.900] (II) intel(0): Printing DDC gathered Modelines: [ 13.900] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP) [ 13.900] (II) intel(0): Modeline "3200x1800"x0.0 298.60 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (88.9 kHz e) [ 1173.928] (II) config/udev: removing device Logitech Performance MX [ 1173.944] (II) evdev: Logitech Performance MX: Close [ 1173.944] (II) UnloadModule: "evdev" [ 1174.026] (II) config/udev: removing device USB Keyboard [ 1174.040] (II) evdev: USB Keyboard: Close [ 1174.040] (II) UnloadModule: "evdev" [ 1174.078] (II) config/udev: removing device USB Keyboard [ 1174.104] (II) evdev: USB Keyboard: Close [ 1174.104] (II) UnloadModule: "evdev" (EE) SynPS/2 Synaptics TouchPad: Read error 19 [ 1206.149] (II) config/udev: removing device SynPS/2 Synaptics TouchPad [ 1206.168] (II) UnloadModule: "synaptics" [ 7783.224] (II) config/udev: Adding input device USB Keyboard (/dev/input/event3) [ 7783.224] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 7783.224] (II) Using input driver 'evdev' for 'USB Keyboard' [ 7783.224] (**) USB Keyboard: always reports core events [ 7783.224] (**) evdev: USB Keyboard: Device: "/dev/input/event3" [ 7783.224] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169 [ 7783.224] (--) evdev: USB Keyboard: Found keys [ 7783.224] (II) evdev: USB Keyboard: Configuring as keyboard [ 7783.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.000E/input/input28/event3" [ 7783.224] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10) [ 7783.224] (**) Option "xkb_rules" "evdev" [ 7783.224] (**) Option "xkb_model" "pc105" [ 7783.224] (**) Option "xkb_layout" "us" [ 7783.226] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2) [ 7783.226] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 7783.226] (II) Using input driver 'evdev' for 'USB Keyboard' [ 7783.226] (**) USB Keyboard: always reports core events [ 7783.226] (**) evdev: USB Keyboard: Device: "/dev/input/event2" [ 7783.226] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169 [ 7783.226] (--) evdev: USB Keyboard: Found keys [ 7783.226] (II) evdev: USB Keyboard: Configuring as keyboard [ 7783.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000D/input/input27/event2" [ 7783.227] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 11) [ 7783.227] (**) Option "xkb_rules" "evdev" [ 7783.227] (**) Option "xkb_model" "pc105" [ 7783.227] (**) Option "xkb_layout" "us" [ 7783.234] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/event1) [ 7783.234] (**) Logitech Performance MX: Applying InputClass "evdev pointer catchall" [ 7783.234] (II) Using input driver 'evdev' for 'Logitech Performance MX' [ 7783.234] (**) Logitech Performance MX: always reports core events [ 7783.234] (**) evdev: Logitech Performance MX: Device: "/dev/input/event1" [ 7783.234] (--) evdev: Logitech Performance MX: Vendor 0x46d Product 0x101a [ 7783.234] (--) evdev: Logitech Performance MX: Found 20 mouse buttons [ 7783.234] (--) evdev: Logitech Performance MX: Found scroll wheel(s) [ 7783.234] (--) evdev: Logitech Performance MX: Found relative axes [ 7783.234] (--) evdev: Logitech Performance MX: Found x and y relative axes [ 7783.234] (II) evdev: Logitech Performance MX: Configuring as mouse [ 7783.234] (II) evdev: Logitech Performance MX: Adding scrollwheel support [ 7783.234] (**) evdev: Logitech Performance MX: YAxisMapping: buttons 4 and 5 [ 7783.234] (**) evdev: Logitech Performance MX: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 7783.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.000B/0003:046D:101A.000C/input/input26/event1" [ 7783.234] (II) XINPUT: Adding extended input device "Logitech Performance MX" (type: MOUSE, id 12) [ 7783.234] (II) evdev: Logitech Performance MX: initialized for relative axes. [ 7783.235] (**) Logitech Performance MX: (accel) keeping acceleration scheme 1 [ 7783.235] (**) Logitech Performance MX: (accel) acceleration profile 0 [ 7783.235] (**) Logitech Performance MX: (accel) acceleration factor: 2.000 [ 7783.235] (**) Logitech Performance MX: (accel) acceleration threshold: 4 [ 7783.236] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/mouse0) [ 7783.236] (II) No input driver specified, ignoring this device. [ 7783.236] (II) This device may have been added with another device file. [ 7789.728] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 7789.739] (II) intel(0): resizing framebuffer to 3840x2160 [ 7789.780] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 7790.974] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 8140.857] (II) intel(0): resizing framebuffer to 3200x1800 [ 8140.861] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 8141.512] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 8141.603] (II) intel(0): resizing framebuffer to 3840x2160 [ 8141.635] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 8142.828] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 10937.551] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 10941.589] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 11594.002] (II) intel(0): resizing framebuffer to 3200x1800 [ 11594.012] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 11594.619] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 11594.646] (II) intel(0): resizing framebuffer to 3840x2160 [ 11594.674] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 11595.885] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 11883.507] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 12040.397] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 12041.344] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 12357.403] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 12928.434] (II) intel(0): resizing framebuffer to 3200x1800 [ 12928.442] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 12929.100] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 12929.103] (II) intel(0): resizing framebuffer to 3840x2160 [ 12929.120] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 12930.438] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 18579.019] (II) intel(0): resizing framebuffer to 3200x1800 [ 18579.022] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 18585.458] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 18585.480] (II) intel(0): resizing framebuffer to 3840x2160 [ 18585.493] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 18586.681] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 29252.535] (II) intel(0): resizing framebuffer to 3200x1800 [ 29252.543] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 29256.189] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 29256.201] (II) intel(0): resizing framebuffer to 3840x2160 [ 29256.225] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 29257.453] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 32297.457] (II) intel(0): resizing framebuffer to 3200x1800 [ 32297.463] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 32298.111] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 32298.115] (II) intel(0): resizing framebuffer to 3840x2160 [ 32298.126] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 32299.337] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 36806.508] (II) intel(0): resizing framebuffer to 3200x1800 [ 36806.516] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 36808.813] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 36808.825] (II) intel(0): resizing framebuffer to 3840x2160 [ 36808.846] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 36810.089] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 36944.287] (II) intel(0): resizing framebuffer to 3200x1800 [ 36944.293] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 36971.208] (II) config/udev: removing device AT Translated Set 2 keyboard [ 36971.229] (II) evdev: AT Translated Set 2 keyboard: Close [ 36971.230] (II) UnloadModule: "evdev" [ 36971.231] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 36971.232] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 36971.232] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 36971.232] (**) AT Translated Set 2 keyboard: always reports core events [ 36971.232] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 36971.232] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 36971.232] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 36971.232] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 36971.232] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input35/event0" [ 36971.232] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16) [ 36971.232] (**) Option "xkb_rules" "evdev" [ 36971.232] (**) Option "xkb_model" "pc105" [ 36971.232] (**) Option "xkb_layout" "us" [ 36989.426] (II) config/udev: removing device USB Keyboard [ 36989.440] (II) evdev: USB Keyboard: Close [ 36989.440] (II) UnloadModule: "evdev" [ 36990.197] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 36990.198] (II) config/udev: removing device USB Keyboard [ 36990.224] (II) evdev: USB Keyboard: Close [ 36990.225] (II) UnloadModule: "evdev" [ 36990.489] (II) intel(0): resizing framebuffer to 3840x2160 [ 36990.528] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 36991.776] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 37030.997] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2) [ 37030.998] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 37030.998] (II) Using input driver 'evdev' for 'USB Keyboard' [ 37030.999] (**) USB Keyboard: always reports core events [ 37030.999] (**) evdev: USB Keyboard: Device: "/dev/input/event2" [ 37030.999] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169 [ 37031.000] (--) evdev: USB Keyboard: Found keys [ 37031.000] (II) evdev: USB Keyboard: Configuring as keyboard [ 37031.000] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40/event2" [ 37031.001] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10) [ 37031.001] (**) Option "xkb_rules" "evdev" [ 37031.001] (**) Option "xkb_model" "pc105" [ 37031.001] (**) Option "xkb_layout" "us" [ 37031.003] (II) config/udev: Adding input device USB Keyboard (/dev/input/event3) [ 37031.003] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 37031.003] (II) Using input driver 'evdev' for 'USB Keyboard' [ 37031.003] (**) USB Keyboard: always reports core events [ 37031.003] (**) evdev: USB Keyboard: Device: "/dev/input/event3" [ 37031.003] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169 [ 37031.003] (--) evdev: USB Keyboard: Found keys [ 37031.003] (II) evdev: USB Keyboard: Configuring as keyboard [ 37031.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41/event3" [ 37031.003] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 11) [ 37031.003] (**) Option "xkb_rules" "evdev" [ 37031.003] (**) Option "xkb_model" "pc105" [ 37031.003] (**) Option "xkb_layout" "us" [ 37066.925] (II) intel(0): resizing framebuffer to 3200x1800 [ 37066.932] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 37072.488] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 37072.506] (II) intel(0): resizing framebuffer to 3840x2160 [ 37072.527] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 37073.871] (--) intel(0): HDMI max TMDS frequency 600000KHz [ 37087.204] (II) config/udev: removing device Logitech Performance MX [ 37087.224] (II) evdev: Logitech Performance MX: Close [ 37087.224] (II) UnloadModule: "evdev" [ 37096.406] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/event1) [ 37096.406] (**) Logitech Performance MX: Applying InputClass "evdev pointer catchall" [ 37096.406] (II) Using input driver 'evdev' for 'Logitech Performance MX' [ 37096.406] (**) Logitech Performance MX: always reports core events [ 37096.406] (**) evdev: Logitech Performance MX: Device: "/dev/input/event1" [ 37096.444] (--) evdev: Logitech Performance MX: Vendor 0x46d Product 0x101a [ 37096.444] (--) evdev: Logitech Performance MX: Found 20 mouse buttons [ 37096.444] (--) evdev: Logitech Performance MX: Found scroll wheel(s) [ 37096.444] (--) evdev: Logitech Performance MX: Found relative axes [ 37096.444] (--) evdev: Logitech Performance MX: Found x and y relative axes [ 37096.444] (II) evdev: Logitech Performance MX: Configuring as mouse [ 37096.444] (II) evdev: Logitech Performance MX: Adding scrollwheel support [ 37096.444] (**) evdev: Logitech Performance MX: YAxisMapping: buttons 4 and 5 [ 37096.444] (**) evdev: Logitech Performance MX: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 37096.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/event1" [ 37096.444] (II) XINPUT: Adding extended input device "Logitech Performance MX" (type: MOUSE, id 12) [ 37096.445] (II) evdev: Logitech Performance MX: initialized for relative axes. [ 37096.445] (**) Logitech Performance MX: (accel) keeping acceleration scheme 1 [ 37096.445] (**) Logitech Performance MX: (accel) acceleration profile 0 [ 37096.445] (**) Logitech Performance MX: (accel) acceleration factor: 2.000 [ 37096.446] (**) Logitech Performance MX: (accel) acceleration threshold: 4 [ 37096.447] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/mouse0) [ 37096.447] (II) No input driver specified, ignoring this device. [ 37096.447] (II) This device may have been added with another device file. udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=706497 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8 N: input/event8 E: BACKSPACE=guess E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=716368 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b00000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=726147 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10 N: input/event10 E: BACKSPACE=guess E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=726237 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=705548 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6 N: input/event6 E: BACKSPACE=guess E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=716179 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6 E: EV=21 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: TAGS=:seat: E: USEC_INITIALIZED=704257 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event5 N: input/event5 E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event5 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=715973 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0E_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=705871 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event7 N: input/event7 E: BACKSPACE=guess E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event7 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=716278 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42 E: EV=17 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_1_1_2 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_Receiver E: ID_MODEL_ENC=USB\x20Receiver E: ID_MODEL_ID=c52b E: ID_PATH=pci-0000:00:14.0-usb-0:1.1:1.2 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1_2 E: ID_REVISION=1201 E: ID_SERIAL=Logitech_USB_Receiver E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=02 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: KEY=ffff0000 0 0 0 0 E: MODALIAS=input:b0003v046Dp101Ae0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw E: MSC=10 E: NAME="Logitech Performance MX" E: PHYS="usb-0000:00:14.0-1.1:1" E: PRODUCT=3/46d/101a/111 E: PROP=0 E: REL=143 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=96372227 P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/event1 N: input/event1 S: input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse S: input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-event-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-event-mouse E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/event1 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_Receiver E: ID_MODEL_ENC=USB\x20Receiver E: ID_MODEL_ID=c52b E: ID_PATH=pci-0000:00:14.0-usb-0:1.1:1.2 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1_2 E: ID_REVISION=1201 E: ID_SERIAL=Logitech_USB_Receiver E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=02 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: USEC_INITIALIZED=96372619 P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/mouse0 N: input/mouse0 S: input/by-id/usb-Logitech_USB_Receiver-if02-mouse S: input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/mouse0 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_Receiver E: ID_MODEL_ENC=USB\x20Receiver E: ID_MODEL_ID=c52b E: ID_PATH=pci-0000:00:14.0-usb-0:1.1:1.2 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1_2 E: ID_REVISION=1201 E: ID_SERIAL=Logitech_USB_Receiver E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030102:030000: E: ID_USB_INTERFACE_NUM=02 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=96372491 P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40 E: EV=120013 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_2_1_0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_MODEL=USB_Keyboard E: ID_MODEL_ENC=USB\x20Keyboard E: ID_MODEL_ID=0169 E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_0 E: ID_REVISION=0209 E: ID_SERIAL=04d9_USB_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=04d9 E: ID_VENDOR_ENC=04d9 E: ID_VENDOR_ID=04d9 E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0003v04D9p0169e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw E: MSC=10 E: NAME="USB Keyboard" E: PHYS="usb-0000:00:14.0-1.2/input0" E: PRODUCT=3/4d9/169/110 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=30810642 P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40/event2 N: input/event2 S: input/by-id/usb-04d9_USB_Keyboard-event-kbd S: input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-id/usb-04d9_USB_Keyboard-event-kbd /dev/input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-event-kbd E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40/event2 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_MODEL=USB_Keyboard E: ID_MODEL_ENC=USB\x20Keyboard E: ID_MODEL_ID=0169 E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_0 E: ID_REVISION=0209 E: ID_SERIAL=04d9_USB_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=04d9 E: ID_VENDOR_ENC=04d9 E: ID_VENDOR_ID=04d9 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: USEC_INITIALIZED=37030869184 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41 E: EV=13 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_2_1_1 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=USB_Keyboard E: ID_MODEL_ENC=USB\x20Keyboard E: ID_MODEL_ID=0169 E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.1 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_1 E: ID_REVISION=0209 E: ID_SERIAL=04d9_USB_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030102: E: ID_USB_INTERFACE_NUM=01 E: ID_VENDOR=04d9 E: ID_VENDOR_ENC=04d9 E: ID_VENDOR_ID=04d9 E: KEY=300a010802000 0 0 1078002044000 603878d801d6e9 1e000000000000 0 E: MODALIAS=input:b0003v04D9p0169e0110-e0,1,4,k71,72,73,74,80,83,85,86,87,89,8A,8C,8E,8F,90,9B,9C,9E,9F,A3,A4,A5,A6,AB,AC,AD,B5,B6,CE,D2,D9,E7,E8,E9,EA,F0,18D,197,19C,1A5,1A7,1B0,1B1,ram4,lsfw E: MSC=10 E: NAME="USB Keyboard" E: PHYS="usb-0000:00:14.0-1.2/input1" E: PRODUCT=3/4d9/169/110 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=30893175 P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41/event3 N: input/event3 S: input/by-id/usb-04d9_USB_Keyboard-event-if01 S: input/by-path/pci-0000:00:14.0-usb-0:1.2:1.1-event E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-id/usb-04d9_USB_Keyboard-event-if01 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.2:1.1-event E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41/event3 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=USB_Keyboard E: ID_MODEL_ENC=USB\x20Keyboard E: ID_MODEL_ID=0169 E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.1 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_1 E: ID_REVISION=0209 E: ID_SERIAL=04d9_USB_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030102: E: ID_USB_INTERFACE_NUM=01 E: ID_VENDOR=04d9 E: ID_VENDOR_ENC=04d9 E: ID_VENDOR_ID=04d9 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: USEC_INITIALIZED=30952886 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10 E: ABS=3273800000000003 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10 E: EV=b E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_4_1_0 E: ID_INPUT=1 E: ID_INPUT_TOUCHSCREEN=1 E: ID_MODEL=Touchscreen E: ID_MODEL_ENC=Touchscreen E: ID_MODEL_ID=2234 E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=1111 E: ID_SERIAL=ELAN_Touchscreen E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=ELAN E: ID_VENDOR_ENC=ELAN E: ID_VENDOR_ID=04f3 E: KEY=400 0 0 0 0 0 E: MODALIAS=input:b0003v04F3p2234e0110-e0,1,3,k14A,ra0,1,2F,30,31,34,35,36,39,3C,3D,mlsfw E: NAME="ELAN Touchscreen" E: PHYS="usb-0000:00:14.0-4/input0" E: PRODUCT=3/4f3/2234/110 E: PROP=2 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=717389 P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/event9 N: input/event9 S: input/by-id/usb-ELAN_Touchscreen-event-if00 S: input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event E: DEVLINKS=/dev/input/by-id/usb-ELAN_Touchscreen-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/event9 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_TOUCHSCREEN=1 E: ID_MODEL=Touchscreen E: ID_MODEL_ENC=Touchscreen E: ID_MODEL_ID=2234 E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=1111 E: ID_SERIAL=ELAN_Touchscreen E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=ELAN E: ID_VENDOR_ENC=ELAN E: ID_VENDOR_ID=04f3 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=717714 P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/mouse2 N: input/mouse2 E: DEVNAME=/dev/input/mouse2 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/mouse2 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_TOUCHSCREEN=1 E: ID_MODEL=Touchscreen E: ID_MODEL_ENC=Touchscreen E: ID_MODEL_ID=2234 E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=1111 E: ID_SERIAL=ELAN_Touchscreen E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=ELAN E: ID_VENDOR_ENC=ELAN E: ID_VENDOR_ID=04f3 E: MAJOR=13 E: MINOR=34 E: SUBSYSTEM=input E: USEC_INITIALIZED=717551 P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13 E: EV=3 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_5_1_0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Integrated_Webcam_HD E: ID_MODEL_ENC=Integrated_Webcam_HD E: ID_MODEL_ID=670c E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0 E: ID_REVISION=5626 E: ID_SERIAL=CN09GTFM72487678B2X7A01_Integrated_Webcam_HD E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=CN09GTFM72487678B2X7A01 E: ID_VENDOR_ENC=CN09GTFM72487678B2X7A01 E: ID_VENDOR_ID=0c45 E: KEY=100000 0 0 0 E: MODALIAS=input:b0003v0C45p670Ce5626-e0,1,kD4,ramlsfw E: NAME="Integrated_Webcam_HD" E: PHYS="usb-0000:00:14.0-5/button" E: PRODUCT=3/c45/670c/5626 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=728492 P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event11 N: input/event11 S: input/by-id/usb-CN09GTFM72487678B2X7A01_Integrated_Webcam_HD-event-if00 S: input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-id/usb-CN09GTFM72487678B2X7A01_Integrated_Webcam_HD-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event11 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Integrated_Webcam_HD E: ID_MODEL_ENC=Integrated_Webcam_HD E: ID_MODEL_ID=670c E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0 E: ID_REVISION=5626 E: ID_SERIAL=CN09GTFM72487678B2X7A01_Integrated_Webcam_HD E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=CN09GTFM72487678B2X7A01 E: ID_VENDOR_ENC=CN09GTFM72487678B2X7A01 E: ID_VENDOR_ID=0c45 E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: USEC_INITIALIZED=728559 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15 E: ABS=260800000000003 E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15 E: EV=b E: ID_FOR_SEAT=input-pci-0000_00_15_1-platform-i2c_designware_1 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1 E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1 E: ID_SERIAL=noserial E: KEY=e520 10000 0 0 0 0 E: MODALIAS=input:b0018v06CBp76AEe0100-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,2F,35,36,39,mlsfw E: NAME="DLL0704:01 06CB:76AE Touchpad" E: PHYS="i2c-DLL0704:01" E: PRODUCT=18/6cb/76ae/100 E: PROP=5 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=55541 P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/event13 N: input/event13 S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse E: DEVNAME=/dev/input/event13 E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/event13 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1 E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=77 E: SUBSYSTEM=input E: USEC_INITIALIZED=55770 P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/mouse3 N: input/mouse3 S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse E: DEVNAME=/dev/input/mouse3 E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/mouse3 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1 E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=35 E: SUBSYSTEM=input E: USEC_INITIALIZED=55645 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input17 E: EV=40001 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0001v10ECp0256e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PRODUCT=1/10ec/256/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=644504 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input17/event14 N: input/event14 E: DEVNAME=/dev/input/event14 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input17/event14 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=78 E: SUBSYSTEM=input E: USEC_INITIALIZED=645066 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input18 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel PCH Headphone Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=646208 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input18/event15 N: input/event15 E: DEVNAME=/dev/input/event15 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input18/event15 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=79 E: SUBSYSTEM=input E: USEC_INITIALIZED=646220 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input19 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=3" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=646237 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input19/event16 N: input/event16 E: DEVNAME=/dev/input/event16 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input19/event16 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=80 E: SUBSYSTEM=input E: USEC_INITIALIZED=646248 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input20 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=7" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=646263 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input20/event17 N: input/event17 E: DEVNAME=/dev/input/event17 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input20/event17 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=81 E: SUBSYSTEM=input E: USEC_INITIALIZED=646274 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input21 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=8" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=646289 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input21/event18 N: input/event18 E: DEVNAME=/dev/input/event18 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input21/event18 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=82 E: SUBSYSTEM=input E: USEC_INITIALIZED=646299 P: /devices/platform/i8042/serio0/input/input35 E: DEVPATH=/devices/platform/i8042/serio0/input/input35 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=971103944 P: /devices/platform/i8042/serio0/input/input35/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input35/event0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEYBOARD_KEY_81=playpause E: KEYBOARD_KEY_82=stopcd E: KEYBOARD_KEY_83=previoussong E: KEYBOARD_KEY_84=nextsong E: KEYBOARD_KEY_85=brightnessdown E: KEYBOARD_KEY_86=brightnessup E: KEYBOARD_KEY_87=battery E: KEYBOARD_KEY_88=unknown E: KEYBOARD_KEY_89=ejectclosecd E: KEYBOARD_KEY_8F=switchvideomode E: KEYBOARD_KEY_8a=suspend E: KEYBOARD_KEY_8b=switchvideomode E: KEYBOARD_KEY_8c=!unknown E: KEYBOARD_KEY_90=previoussong E: KEYBOARD_KEY_91=prog1 E: KEYBOARD_KEY_92=media E: KEYBOARD_KEY_93=unknown E: KEYBOARD_KEY_95=camera E: KEYBOARD_KEY_97=email E: KEYBOARD_KEY_98=f21 E: KEYBOARD_KEY_99=nextsong E: KEYBOARD_KEY_9a=setup E: KEYBOARD_KEY_9b=switchvideomode E: KEYBOARD_KEY_9e=f21 E: KEYBOARD_KEY_a2=playpause E: KEYBOARD_KEY_a4=stopcd E: KEYBOARD_KEY_d8=screenlock E: KEYBOARD_KEY_d9=f21 E: KEYBOARD_KEY_ed=media E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=971104736 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/platform/pcspkr/input/input14 E: DEVPATH=/devices/platform/pcspkr/input/input14 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=732663 P: /devices/platform/pcspkr/input/input14/event12 N: input/event12 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/platform/pcspkr/input/input14/event12 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: USEC_INITIALIZED=732759 DRM Information from dmesg: --------------------------- [ 1.201931] Linux agpgart interface v0.103 [ 10.573361] [drm] Initialized [ 10.588086] [drm] Found 64MB of eDRAM [ 10.588347] [drm] Memory usable by graphics device = 4096M [ 10.588349] fb: switching to inteldrmfb from simple [ 10.588464] [drm] Replacing VGA console driver [ 10.594784] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.594785] [drm] Driver supports precise vblank timestamp query. [ 10.606831] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26) [ 10.611750] [drm] GuC firmware load skipped [ 10.619408] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 10.625912] fbcon: inteldrmfb (fb0) is primary device [ 11.815413] [drm] RC6 on [ 11.956642] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1196.700718] [drm] GuC firmware load skipped [ 1197.852759] [drm] RC6 on [ 7778.046373] [drm] GuC firmware load skipped [ 7779.155156] [drm] RC6 on [18578.565981] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [18578.606049] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [29252.077017] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [29252.117065] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [36806.030870] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [36806.069382] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [36943.827132] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [36943.865437] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status [37045.601398] [drm] GuC firmware load skipped [37045.940610] [drm] RC6 on [37061.381763] [drm] GuC firmware load skipped [37062.858398] [drm] RC6 on -- System Information: Debian Release: 8.6 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0 (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to en_US.utf8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.19-18+deb8u6 ii libdrm-intel1 2.4.73-1~bpo8+1 ii libdrm2 2.4.73-1~bpo8+1 ii libpciaccess0 0.13.2-3+b1 ii libpixman-1-0 0.32.6-3 ii libudev1 215-17+deb8u5 ii libx11-6 2:1.6.2-3 ii libx11-xcb1 2:1.6.2-3 ii libxcb-dri2-0 1.10-3+b1 ii libxcb-dri3-0 1.10-3+b1 ii libxcb-sync1 1.10-3+b1 ii libxcb-util0 0.3.8-3 ii libxcb1 1.10-3+b1 ii libxcursor1 1:1.1.14-1+b1 ii libxdamage1 1:1.1.4-2+b1 ii libxext6 2:1.3.3-1 ii libxfixes3 1:5.0.1-2+b2 ii libxinerama1 2:1.1.3-1+b1 ii libxrandr2 2:1.4.2-1+b1 ii libxrender1 1:0.9.8-1+b1 ii libxshmfence1 1.1-4 ii libxss1 1:1.2.2-1 ii libxtst6 2:1.2.2-1+b1 ii libxv1 2:1.0.10-1+b1 ii libxvmc1 2:1.0.8-2+b1 ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1 xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information
