debian/README.source | 73 -----
debian/changelog | 14 -
debian/compat | 2
debian/control | 29 --
debian/libxvmc1.install | 2
debian/rules | 93 -------
debian/xsfbs/repack.sh | 32 --
debian/xsfbs/xsfbs.mk | 276 ---------------------
debian/xsfbs/xsfbs.sh | 622 ------------------------------------------------
9 files changed, 19 insertions(+), 1124 deletions(-)
New commits:
commit 08beb17ab1bac9ebe1c84873fb1fb2bb38ad0a4f
Author: Emilio Pozuelo Monfort <po...@debian.org>
Date: Mon Dec 5 19:52:27 2016 +0100
Release to unstable
diff --git a/debian/changelog b/debian/changelog
index 753aca4..5896526 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-libxvmc (2:1.0.10-1) UNRELEASED; urgency=medium
+libxvmc (2:1.0.10-1) unstable; urgency=medium
[ Andreas Boll ]
* New upstream release.
@@ -17,7 +17,7 @@ libxvmc (2:1.0.10-1) UNRELEASED; urgency=medium
* Move XvMCConfig to its target directory with libxvmc1.install.
* Bump Standards-Version to 3.9.8, no changes.
- -- Andreas Boll <andreas.boll....@gmail.com> Fri, 07 Oct 2016 15:06:25 +0200
+ -- Emilio Pozuelo Monfort <po...@debian.org> Mon, 05 Dec 2016 19:52:24 +0100
libxvmc (2:1.0.9-1) unstable; urgency=medium
commit 6ca1fdd282f45b9790602b3381e0c59a10d70ad7
Author: Emilio Pozuelo Monfort <po...@debian.org>
Date: Mon Dec 5 19:52:16 2016 +0100
Bump Standards-Version
diff --git a/debian/changelog b/debian/changelog
index d833b1f..753aca4 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -15,6 +15,7 @@ libxvmc (2:1.0.10-1) UNRELEASED; urgency=medium
on and calls dh-autoreconf for us.
* Switch to -dbgsym packages.
* Move XvMCConfig to its target directory with libxvmc1.install.
+ * Bump Standards-Version to 3.9.8, no changes.
-- Andreas Boll <andreas.boll....@gmail.com> Fri, 07 Oct 2016 15:06:25 +0200
diff --git a/debian/control b/debian/control
index 9e3242a..737bb71 100644
--- a/debian/control
+++ b/debian/control
@@ -12,7 +12,7 @@ Build-Depends:
xutils-dev (>= 1:7.5+4),
pkg-config,
quilt,
-Standards-Version: 3.9.4
+Standards-Version: 3.9.8
Vcs-Git: https://anonscm.debian.org/git/pkg-xorg/lib/libxvmc.git
Vcs-Browser: https://anonscm.debian.org/cgit/pkg-xorg/lib/libxvmc.git
commit 53c29b943358e74c4c430dede1dc6a1352220c7f
Author: Emilio Pozuelo Monfort <po...@debian.org>
Date: Mon Dec 5 19:50:02 2016 +0100
Move XvMCConfig to its target directory with libxvmc1.install
diff --git a/debian/changelog b/debian/changelog
index dede93b..d833b1f 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -14,6 +14,7 @@ libxvmc (2:1.0.10-1) UNRELEASED; urgency=medium
* Drop unneeded libtool and automake build-deps, debhelper now depends
on and calls dh-autoreconf for us.
* Switch to -dbgsym packages.
+ * Move XvMCConfig to its target directory with libxvmc1.install.
-- Andreas Boll <andreas.boll....@gmail.com> Fri, 07 Oct 2016 15:06:25 +0200
diff --git a/debian/libxvmc1.install b/debian/libxvmc1.install
index 71856ed..7f686c3 100644
--- a/debian/libxvmc1.install
+++ b/debian/libxvmc1.install
@@ -1,3 +1,3 @@
usr/lib/*/libXvMC.so.1*
usr/lib/*/libXvMCW.so.1*
-etc/X11/XvMCConfig
+debian/local/XvMCConfig etc/X11/
diff --git a/debian/rules b/debian/rules
index 6dce26a..7eb728a 100755
--- a/debian/rules
+++ b/debian/rules
@@ -4,6 +4,4 @@
dh $@
override_dh_install:
- mkdir -p $(CURDIR)/debian/tmp/etc/X11
- cp debian/local/XvMCConfig $(CURDIR)/debian/tmp/etc/X11
dh_install --fail-missing --exclude=.la
commit 152541ca5955803443323b10bdf67888e3b201b8
Author: Emilio Pozuelo Monfort <po...@debian.org>
Date: Mon Dec 5 19:40:59 2016 +0100
Switch to -dbgsym packages
diff --git a/debian/changelog b/debian/changelog
index 3a08997..dede93b 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -13,6 +13,7 @@ libxvmc (2:1.0.10-1) UNRELEASED; urgency=medium
* Switch from xsfbs to dh.
* Drop unneeded libtool and automake build-deps, debhelper now depends
on and calls dh-autoreconf for us.
+ * Switch to -dbgsym packages.
-- Andreas Boll <andreas.boll....@gmail.com> Fri, 07 Oct 2016 15:06:25 +0200
diff --git a/debian/control b/debian/control
index f1beb6a..9e3242a 100644
--- a/debian/control
+++ b/debian/control
@@ -37,29 +37,6 @@ Description: X11 Video extension library
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXvMC
-Package: libxvmc1-dbg
-Section: debug
-Architecture: any
-Priority: extra
-Depends: ${shlibs:Depends}, ${misc:Depends}, x11-common, libxvmc1 (=
${binary:Version})
-Description: X11 Video extension library (debug package)
- libXvMC provides an X Window System client interface to the
- XVideo-MotionCompensation extension to the X protocol.
- .
- The XVideo-MotionCompensation extension allows for further accelerated drawing
- of videos. Video data may be sent at earlier stages of the decoding pipeline
- than raw YUV data. At the moment, driver support for XvMC is poor to
- non-existent.
- .
- This package contains the debug versions of the library found in libxvmc1.
- Non-developers likely have little use for this package.
- .
- More information about X.Org can be found at:
- <URL:https://www.X.org>
- .
- This module can be found at
- git://anongit.freedesktop.org/git/xorg/lib/libXvMC
-
Package: libxvmc-dev
Section: libdevel
Architecture: any
diff --git a/debian/rules b/debian/rules
index cfaa785..6dce26a 100755
--- a/debian/rules
+++ b/debian/rules
@@ -3,9 +3,6 @@
%:
dh $@
-override_dh_strip:
- dh_strip --dbg-package=libxvmc1-dbg
-
override_dh_install:
mkdir -p $(CURDIR)/debian/tmp/etc/X11
cp debian/local/XvMCConfig $(CURDIR)/debian/tmp/etc/X11
commit a31424c8bf6d7d5136ff2c09bda93689ef7a8e54
Author: Emilio Pozuelo Monfort <po...@debian.org>
Date: Mon Dec 5 19:39:49 2016 +0100
Drop unneeded libtool and automake build-deps
diff --git a/debian/changelog b/debian/changelog
index 4945e23..3a08997 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -11,6 +11,8 @@ libxvmc (2:1.0.10-1) UNRELEASED; urgency=medium
[ Emilio Pozuelo Monfort ]
* Bump debhelper compat to 10.
* Switch from xsfbs to dh.
+ * Drop unneeded libtool and automake build-deps, debhelper now depends
+ on and calls dh-autoreconf for us.
-- Andreas Boll <andreas.boll....@gmail.com> Fri, 07 Oct 2016 15:06:25 +0200
diff --git a/debian/control b/debian/control
index 7544288..f1beb6a 100644
--- a/debian/control
+++ b/debian/control
@@ -12,8 +12,6 @@ Build-Depends:
xutils-dev (>= 1:7.5+4),
pkg-config,
quilt,
- automake,
- libtool
Standards-Version: 3.9.4
Vcs-Git: https://anonscm.debian.org/git/pkg-xorg/lib/libxvmc.git
Vcs-Browser: https://anonscm.debian.org/cgit/pkg-xorg/lib/libxvmc.git
commit 7a9e8d6e5da915c1a1b4521bb6616b5c8a13222d
Author: Emilio Pozuelo Monfort <po...@debian.org>
Date: Mon Dec 5 19:24:40 2016 +0100
Switch from xsfbs to dh
diff --git a/debian/README.source b/debian/README.source
deleted file mode 100644
index 34ab4bf..0000000
--- a/debian/README.source
+++ /dev/null
@@ -1,73 +0,0 @@
-------------------------------------------------------
-Quick Guide To Patching This Package For The Impatient
-------------------------------------------------------
-
-1. Make sure you have quilt installed
-2. Unpack the package as usual with "dpkg-source -x"
-3. Run the "patch" target in debian/rules
-4. Create a new patch with "quilt new" (see quilt(1))
-5. Edit all the files you want to include in the patch with "quilt edit"
- (see quilt(1)).
-6. Write the patch with "quilt refresh" (see quilt(1))
-7. Run the "clean" target in debian/rules
-
-Alternatively, instead of using quilt directly, you can drop the patch in to
-debian/patches and add the name of the patch to debian/patches/series.
-
-------------------------------------
-Guide To The X Strike Force Packages
-------------------------------------
-
-The X Strike Force team maintains X packages in git repositories on
-git.debian.org in the pkg-xorg subdirectory. Most upstream packages
-are actually maintained in git repositories as well, so they often
-just need to be pulled into git.debian.org in a "upstream-*" branch.
-Otherwise, the upstream sources are manually installed in the Debian
-git repository.
-
-The .orig.tar.gz upstream source file could be generated this
-"upstream-*" branch in the Debian git repository but it is actually
-copied from upstream tarballs directly.
-
-Due to X.org being highly modular, packaging all X.org applications
-as their own independent packages would have created too many Debian
-packages. For this reason, some X.org applications have been grouped
-into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils,
-x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils.
-Most packages, including the X.org server itself and all libraries
-and drivers are, however maintained independently.
-
-The Debian packaging is added by creating the "debian-*" git branch
-which contains the aforementioned "upstream-*" branch plus the debian/
-repository files.
-When a patch has to be applied to the Debian package, two solutions
-are involved:
-* If the patch is available in one of the upstream branches, it
- may be git'cherry-picked into the Debian repository. In this
- case, it appears directly in the .diff.gz.
-* Otherwise, the patch is added to debian/patches/ which is managed
- with quilt as documented in /usr/share/doc/quilt/README.source.
-
-quilt is actually invoked by the Debian X packaging through a larger
-set of scripts called XSFBS. XSFBS brings some other X specific
-features such as managing dependencies and conflicts due to the video
-and input driver ABIs.
-XSFBS itself is maintained in a separate repository at
- git://git.debian.org/pkg-xorg/xsfbs.git
-and it is pulled inside the other Debian X repositories when needed.
-
-The XSFBS patching system requires a build dependency on quilt. Also
-a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
-so that the XSFBS patching occurs before the actual build. So the
-very first target of the build (likely the one running autoreconf)
-should depend on $(STAMP_DIR)/patch. It should also not depend on
-anything so that parallel builds are correctly supported (nothing
-should probably run while patching is being done). And finally, the
-clean target should depend on the xsfclean target so that patches
-are unapplied on clean.
-
-When the upstream sources contain some DFSG-nonfree files, they are
-listed in text files in debian/prune/ in the "debian-*" branch of
-the Debian repository. XSFBS' scripts then take care of removing
-these listed files during the build so as to generate a modified
-DFSG-free .orig.tar.gz tarball.
diff --git a/debian/changelog b/debian/changelog
index da7a99d..4945e23 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -10,6 +10,7 @@ libxvmc (2:1.0.10-1) UNRELEASED; urgency=medium
[ Emilio Pozuelo Monfort ]
* Bump debhelper compat to 10.
+ * Switch from xsfbs to dh.
-- Andreas Boll <andreas.boll....@gmail.com> Fri, 07 Oct 2016 15:06:25 +0200
diff --git a/debian/rules b/debian/rules
index 8c6b373..cfaa785 100755
--- a/debian/rules
+++ b/debian/rules
@@ -1,94 +1,12 @@
#!/usr/bin/make -f
-# debian/rules for the Debian libxv package.
-# Copyright © 2004 Scott James Remnant <sc...@netsplit.com>
-# Copyright © 2005 Daniel Stone <dan...@fooishbar.org>
-# Copyright © 2005 David Nusinow <dnusi...@debian.org>
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
+%:
+ dh $@
-# set this to the name of the main shlib's binary package
-PACKAGE = libxvmc1
+override_dh_strip:
+ dh_strip --dbg-package=libxvmc1-dbg
-DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
-
-include debian/xsfbs/xsfbs.mk
-
-ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
- NUMJOBS = $(patsubst parallel=%,%,$(filter
parallel=%,$(DEB_BUILD_OPTIONS)))
- MAKEFLAGS += -j$(NUMJOBS)
-endif
-
-DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
- confflags += --build=$(DEB_HOST_GNU_TYPE)
-else
- confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
-endif
-
-
-build: patch build-stamp
-build-stamp:
- dh_testdir
- autoreconf -vfi
- mkdir -p build
- cd build && \
- ../configure --prefix=/usr \
- --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \
- --sysconfdir=/etc --mandir=\$${prefix}/share/man \
- --infodir=\$${prefix}/share/info $(confflags) \
- --disable-silent-rules \
- $(shell DEB_CFLAGS_MAINT_APPEND=-Wall dpkg-buildflags
--export=configure)
- cd build && $(MAKE)
- >$@
-
-clean: xsfclean
- dh_testdir
- rm -f build-stamp
- rm -f config.cache config.log config.status
- rm -f */config.cache */config.log */config.status
- rm -f conftest* */conftest*
- rm -rf autom4te.cache */autom4te.cache
- rm -rf build
- rm -f aclocal.m4 config.guess config.h.in config.sub configure
- rm -f compile depcomp install-sh ltmain.sh missing mkinstalldirs
- find -name Makefile.in -delete
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_prep
- dh_installdirs
-
- cd build && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+override_dh_install:
mkdir -p $(CURDIR)/debian/tmp/etc/X11
cp debian/local/XvMCConfig $(CURDIR)/debian/tmp/etc/X11
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
-
- dh_installdocs
dh_install --fail-missing --exclude=.la
- dh_installchangelogs
- dh_link
- dh_strip --dbg-package=$(PACKAGE)-dbg
- dh_compress
- dh_fixperms
- dh_makeshlibs
- dh_shlibdeps
- dh_installdeb
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-
-# Build architecture-independent files here.
-binary-indep: build install
-# Nothing to do
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
deleted file mode 100755
index 5935cc9..0000000
--- a/debian/xsfbs/repack.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
- exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
- exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
- exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
deleted file mode 100755
index 5e16b10..0000000
--- a/debian/xsfbs/xsfbs.mk
+++ /dev/null
@@ -1,276 +0,0 @@
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1...@debian.org>
-# Modified by Mark W. Eichin <eic...@kitten.gen.ma.us>
-# Modified by Adam Heath <doo...@debian.org>
-# Modified by Branden Robinson <bran...@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbi...@fabbione.net>
-# Modified by David Nusinow <dnusi...@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat
/etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the codename of a release in the Debian part of the
-# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo
$${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*"
>/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation
policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
- ARCH:=$(ARCH)
- else
- ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-# 1) A target name that is invoked by a package-building tool or the user.
-# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-# 2) A line delcaring 1) as a phony target (".PHONY:").
-# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-# depend on other targets.
-# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-# "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir". Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again. Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
- mkdir $(STAMP_DIR)
- >$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts
- >$@
-
-.PHONY: log
-stampdir_targets+=log
-log: $(STAMP_DIR)/log
-$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir
- mkdir -p $(STAMP_DIR)/log
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
- if ! [ `which quilt` ]; then \
- echo "Couldn't find quilt. Please install it or add it to the
build-depends for this package."; \
- exit 1; \
- fi; \
- if $(QUILT) next >/dev/null 2>&1; then \
- echo -n "Applying patches..."; \
- if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
- cat $(STAMP_DIR)/log/patch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/patch; \
- echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "No patches to apply"; \
- fi; \
- >$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/log
- rm -f $(STAMP_DIR)/patch
- @echo -n "Unapplying patches..."; \
- if $(QUILT) applied >/dev/null 2>/dev/null; then \
- if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "nothing to do."; \
- fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
- rm -f $(STAMP_DIR)/genscripts
- rm -f debian/*.config \
- debian/*.postinst \
- debian/*.postrm \
- debian/*.preinst \
- debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
- dh_testdir
- rm -rf .pc
- rm -rf $(STAMP_DIR)
- dh_clean
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems. It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
- # Ensure we're in the correct directory.
- dh_testdir
- grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
- @echo -n "Auditing patches..."; \
- >$(STAMP_DIR)/log/patch; \
- FUZZY=; \
- while [ -n "$$($(QUILT) next)" ]; do \
- RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep
^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
- case "$$RESULT" in \
- succeeded) \
- echo "fuzzy patch: $$($(QUILT) top)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
- FUZZY=yes; \
- ;; \
- FAILED) \
- echo "broken patch: $$($(QUILT) next)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
- exit 1; \
- ;; \
- esac; \
- done; \
- if [ -n "$$FUZZY" ]; then \
- echo "there were fuzzy patches; please fix."; \
- exit 1; \
- else \
- echo "done."; \
- fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
- for FILE in debian/*.config.in \
- debian/*.postinst.in \
- debian/*.postrm.in \
- debian/*.preinst.in \
- debian/*.prerm.in; do \
- if [ -e "$$FILE" ]; then \
- MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
- sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
- cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
- sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
- sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
- -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
- <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
- rm $$MAINTSCRIPT.tmp; \
- fi; \
- done
- # Validate syntax of generated shell scripts.
- #sh debian/scripts/validate-posix-sh debian/*.config \
- # debian/*.postinst \
- # debian/*.postrm \
- # debian/*.preinst \
- # debian/*.prerm
- >$@
-
-SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(SERVERMINVERS),)
- @echo error: xserver-xorg-dev needs to be installed
- @exit 1
-else
- echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
- echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >>
debian/$(PACKAGE).substvars
- echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >>
debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
deleted file mode 100644
index 813fd8d..0000000
--- a/debian/xsfbs/xsfbs.sh
+++ /dev/null
@@ -1,622 +0,0 @@
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts. It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper
operation
-# of those functions. By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
- DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
- DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
- RECONFIGURE="true"
-else
- RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
- FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
- UPGRADE="yes"
-fi
-
-trap "message;\
- message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT
script.\";\
- message;\
- exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
- # syntax: reject_nondigits [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted)
for
- # characters other than decimal digits and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain anything but digits?
- if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- # can't use die(), because it wraps message() which wraps this function
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-reject_unlikely_path_chars () {
- # syntax: reject_unlikely_path_chars [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted)
for
- # characters unlikely to be seen in a path and which the shell might
- # interpret and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain any funny characters?
- if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
- "encountered possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user. This is used only as a fallback in the
-# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- DEFCOLUMNS=80
-fi
-
-message () {
- # pretty-print messages of arbitrary length
- reject_nondigits "$COLUMNS"
- echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
- # syntax: observe message ...
- #
- # issue observational message suitable for logging someday when support for
- # it exists in dpkg
- if [ -n "$DEBUG_XORG_PACKAGE" ]; then
- message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
- fi
-}
-
-warn () {
- # syntax: warn message ...
- #
- # issue warning message suitable for logging someday when support for
- # it exists in dpkg; also send to standard error
- message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
- # syntax: die message ...
- #
- # exit script with error message
- message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
- exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
- # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
- message "internal error: $*"
- if [ -n "$OFFICIAL_BUILD" ]; then
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug"
\
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for"
\
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of"
\
- "the same name to file a report."
- fi
- exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
- message "usage error: $*"
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- exit $SHELL_LIB_USAGE_ERROR
-}
-
-font_update () {
- # run $UPDATECMDS in $FONTDIRS
-
- local dir cmd shortcmd x_font_dir_prefix
-
- x_font_dir_prefix="/usr/share/fonts/X11"
-
- if [ -z "$UPDATECMDS" ]; then
- usage_error "font_update() called but \$UPDATECMDS not set"
- fi
- if [ -z "$FONTDIRS" ]; then
- usage_error "font_update() called but \$FONTDIRS not set"
- fi
-
- reject_unlikely_path_chars "$UPDATECMDS"
- reject_unlikely_path_chars "$FONTDIRS"
-
- for dir in $FONTDIRS; do
- if [ -d "$x_font_dir_prefix/$dir" ]; then
- for cmd in $UPDATECMDS; do
- if which "$cmd" > /dev/null 2>&1; then
- shortcmd=${cmd##*/}
- observe "running $shortcmd in $dir font directory"
- cmd_opts=
- if [ "$shortcmd" = "update-fonts-alias" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-dir" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-scale" ]; then
- cmd_opts=--x11r7-layout
- fi
- $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
- "failed; font directory data may not" \
- "be up to date"
- else
- warn "$cmd not found; not updating corresponding $dir font" \
- "directory data"
- fi
- done
- else
- warn "$dir is not a directory; not updating font directory data"
- fi
- done
-}
-
-remove_conffile_prepare () {
- # syntax: remove_conffile_prepare filename official_md5sum ...
- #
- # Check a conffile "filename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 2 ]; then
- usage_error "remove_conffile_prepare() called with wrong number of" \
- "arguments; expected at least 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
- shift
-
- # does the conffile even exist?
- if [ -e "$conffile" ]; then
- # calculate its checksum
- current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
- # compare it to each supplied checksum
- while [ -n "$1" ]; do
- if [ "$current_checksum" = "$1" ]; then
- # we found a match; move the confffile and stop looking
