Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20160127-1+b1
Severity: important
I was using Debian jessie which was working fine. Then I upgraded to
stretch and my X sessions started crashing. Without debugging too
much, I then upgraded to sid in the hope that the X libraries/drivers
would magically fix the problem. Still broken. So then I did some
investigation.
The behavior I observed on stretch and sid is that once I open a
GUI-intensive Java application (in my case Burp Proxy) a little bit of
clicking around and using scroll bars causes X to crash. I am unable
to restart xdm after this, so I believe the video card gets stuck in a
broken state.
Upon reading a bit on the intel(4) man page, I saw the AccelMethod
options, so I added this to my xorg.conf:
Option "AccelMethod" "UXA"
The Xorg.0.log file indicates that UXA is indeed being used now, and
so far I haven't had another crash. So it appears SNA is the culprit.
The Xorg.0.log file you see below is from *after* I made this change.
I will also attach the Xorg.0.log.old file, which shows what happens
when SNA is enabled (note the crash at the end of the file).
cheers,
tim
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Mar 31 2014 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Feb 9 03:12 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 0b)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 4955 Feb 17 10:12 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputClass"
Identifier "evdevClass" # required
MatchIsTouchpad "yes" # required
Driver "evdev" # required
EndSection
Section "InputClass"
Identifier "touchpadClass" # required
MatchIsTouchpad "yes" # required
Driver "synaptics" # required
Option "MinSpeed" "0.5"
Option "MaxSpeed" "1.0"
Option "AccelFactor" "0.075"
Option "TapButton1" "1"
Option "TapButton2" "2" # multitouch
Option "TapButton3" "3" # multitouch
Option "VertTwoFingerScroll" "1" # multitouch
Option "HorizTwoFingerScroll" "1" # multitouch
Option "VertEdgeScroll" "1"
Option "CoastingSpeed" "8"
Option "CornerCoasting" "1"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "7"
Option "EdgeMotionUseAlways" "1"
Option "LBCornerButton" "8" # browser "back" btn
Option "RBCornerButton" "9" # browser "forward" btn
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputClass"
Identifier "Kingsis Peripherals Evoluent VerticalMouse 2"
#0x2222 Product 0x3061
Driver "evdev" # required
MatchUSBID "2222:3061"
Option "Protocol" "auto"
Option "Buttons" "9"
Option "ButtonMapping" "1 9 2 4 5 3 3 3 3"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "True"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "evdev"
Option "Protocol" "auto"
#Option "Device" "/dev/input/mice"
Option "Device"
"/dev/input/by-path/platform-i8042-serio-1-event-mouse"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
Option "AccelMethod" "UXA"
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.3.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 5.3.1
20160121 (Debian 5.3.1-7) ) #1 SMP Debian 4.3.5-1 (2016-02-06)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 36814 Feb 17 10:13 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 18.715]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 18.715] X Protocol Version 11, Revision 0
[ 18.715] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 18.715] Current Operating System: Linux pauling 4.3.0-1-amd64 #1 SMP
Debian 4.3.5-1 (2016-02-06) x86_64
[ 18.715] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64
root=UUID=cf03ef23-6da4-4135-81bf-e68c6be5ab98 ro quiet
[ 18.715] Build Date: 09 February 2016 11:06:03AM
[ 18.715] xorg-server 2:1.18.1-1 (http://www.debian.org/support)
[ 18.715] Current version of pixman: 0.33.6
[ 18.715] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.715] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.715] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 17 10:13:11
2016
[ 18.717] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.718] (==) ServerLayout "X.org Configured"
[ 18.718] (**) |-->Screen "Screen0" (0)
[ 18.718] (**) | |-->Monitor "Monitor0"
[ 18.718] (**) | |-->Device "Card0"
[ 18.718] (**) |-->Input Device "Mouse0"
[ 18.718] (**) |-->Input Device "Keyboard0"
[ 18.718] (==) Automatically adding devices
[ 18.718] (==) Automatically enabling devices
[ 18.718] (==) Automatically adding GPU devices
[ 18.718] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 18.720] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.720] Entry deleted from font path.
[ 18.720] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 18.720] Entry deleted from font path.
[ 18.720] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 18.720] Entry deleted from font path.
[ 18.721] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 18.721] Entry deleted from font path.
[ 18.721] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 18.721] Entry deleted from font path.
[ 18.721] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.721] Entry deleted from font path.
[ 18.721] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 18.721] Entry deleted from font path.
[ 18.721] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 18.721] Entry deleted from font path.
[ 18.721] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 18.721] Entry deleted from font path.
[ 18.721] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 18.721] Entry deleted from font path.
[ 18.721] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 18.721] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 18.721] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.
[ 18.721] (WW) Disabling Keyboard0
[ 18.721] (II) Loader magic: 0x55ffd38f8dc0
[ 18.721] (II) Module ABI versions:
[ 18.721] X.Org ANSI C Emulation: 0.4
[ 18.721] X.Org Video Driver: 20.0
[ 18.721] X.Org XInput driver : 22.1
[ 18.721] X.Org Server Extension : 9.0
[ 18.722] (++) using VT number 7
[ 18.722] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[ 18.722] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.724] (--) PCI:*(0:0:2:0) 8086:0a16:1179:0005 rev 11, Mem @
0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 18.724] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 18.724] (II) LoadModule: "glx"
[ 18.725] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.736] (II) Module glx: vendor="X.Org Foundation"
[ 18.736] compiled for 1.18.1, module version = 1.0.0
[ 18.736] ABI class: X.Org Server Extension, version 9.0
[ 18.736] (==) AIGLX enabled
[ 18.736] (II) LoadModule: "intel"
[ 18.736] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.739] (II) Module intel: vendor="X.Org Foundation"
[ 18.739] compiled for 1.18.0, module version = 2.99.917
[ 18.739] Module class: X.Org Video Driver
[ 18.739] ABI class: X.Org Video Driver, version 20.0
[ 18.739] (II) LoadModule: "evdev"
[ 18.739] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.740] (II) Module evdev: vendor="X.Org Foundation"
[ 18.741] compiled for 1.18.0, module version = 2.10.1
[ 18.741] Module class: X.Org XInput Driver
[ 18.741] ABI class: X.Org XInput driver, version 22.1
[ 18.741] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 18.741] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 18.741] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 18.741] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[ 18.741] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 18.741] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 18.744] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.744] (==) intel(0): RGB weight 888
[ 18.744] (==) intel(0): Default visual is TrueColor
[ 18.744] (**) intel(0): Option "AccelMethod" "UXA"
[ 18.744] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
4400
[ 18.744] (**) intel(0): Relaxed fencing enabled
[ 18.744] (**) intel(0): Wait on SwapBuffers? enabled
[ 18.744] (**) intel(0): Triple buffering? enabled
[ 18.744] (**) intel(0): Framebuffer tiled
[ 18.744] (**) intel(0): Pixmaps tiled
[ 18.744] (**) intel(0): 3D buffers tiled
[ 18.744] (**) intel(0): SwapBuffers wait enabled
[ 18.744] (==) intel(0): video overlay key set to 0x101fe
[ 18.745] (II) intel(0): Output eDP1 using monitor section Monitor0
[ 18.745] (--) intel(0): found backlight control interface intel_backlight
[ 18.745] (II) intel(0): Output DP1 has no monitor section
[ 18.746] (II) intel(0): Output HDMI1 has no monitor section
[ 18.746] (II) intel(0): Output DP2 has no monitor section
[ 18.746] (II) intel(0): Output HDMI2 has no monitor section
[ 18.747] (II) intel(0): EDID for output eDP1
[ 18.747] (II) intel(0): Manufacturer: CMN Model: 1355 Serial#: 0
[ 18.747] (II) intel(0): Year: 2013 Week: 11
[ 18.747] (II) intel(0): EDID Version: 1.4
[ 18.747] (II) intel(0): Digital Display Input
[ 18.747] (II) intel(0): 6 bits per channel
[ 18.747] (II) intel(0): Digital interface is DisplayPort
[ 18.747] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 18.747] (II) intel(0): Gamma: 2.20
[ 18.747] (II) intel(0): No DPMS capabilities specified
[ 18.747] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 18.747] (II) intel(0): First detailed timing is preferred mode
[ 18.747] (II) intel(0): Preferred mode is native pixel format and refresh
rate
[ 18.747] (II) intel(0): redX: 0.595 redY: 0.345 greenX: 0.320 greenY:
0.565
[ 18.747] (II) intel(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY:
0.329
[ 18.747] (II) intel(0): Manufacturer's mask: 0
[ 18.747] (II) intel(0): Supported detailed timing:
[ 18.747] (II) intel(0): clock: 76.4 MHz Image Size: 293 x 165 mm
[ 18.747] (II) intel(0): h_active: 1366 h_sync: 1434 h_sync_end 1479
h_blank_end 1592 h_border: 0
[ 18.747] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779
v_blanking: 800 v_border: 0
[ 18.747] (II) intel(0): N133BGE-EAA
[ 18.747] (II) intel(0): CMN
[ 18.747] (II) intel(0): N133BGE-EAA
[ 18.748] (II) intel(0): EDID (in hex):
[ 18.748] (II) intel(0): 00ffffffffffff000dae551300000000
[ 18.748] (II) intel(0): 0b170104951d11780253d59858529027
[ 18.748] (II) intel(0): 21505400000001010101010101010101
[ 18.748] (II) intel(0): 010101010101da1d56e250002030442d
[ 18.748] (II) intel(0): 470025a510000018000000fe004e3133
[ 18.748] (II) intel(0): 334247452d4541410a20000000fe0043
[ 18.748] (II) intel(0): 4d4e0a202020202020202020000000fe
[ 18.748] (II) intel(0): 004e3133334247452d4541410a20006c
[ 18.748] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "576x432" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "720x450" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "800x512" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "960x540" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "960x600" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 18.748] (II) intel(0): Printing probed modes for output eDP1
[ 18.748] (II) intel(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 18.748] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568
1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 18.748] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440
1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 18.748] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 18.748] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 18.748] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 18.748] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 18.748] (II) intel(0): EDID for output DP1
[ 18.748] (II) intel(0): EDID for output HDMI1
[ 18.748] (II) intel(0): EDID for output DP2
[ 18.748] (II) intel(0): EDID for output HDMI2
[ 18.748] (II) intel(0): Output eDP1 connected
[ 18.748] (II) intel(0): Output DP1 disconnected
[ 18.748] (II) intel(0): Output HDMI1 disconnected
[ 18.748] (II) intel(0): Output DP2 disconnected
[ 18.748] (II) intel(0): Output HDMI2 disconnected
[ 18.748] (II) intel(0): Using exact sizes for initial modes
[ 18.748] (II) intel(0): Output eDP1 using initial mode 1366x768 +0+0
[ 18.749] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 18.749] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.749] (==) intel(0): DPI set to (96, 96)
[ 18.749] (II) Loading sub module "fb"
[ 18.749] (II) LoadModule: "fb"
[ 18.749] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.749] (II) Module fb: vendor="X.Org Foundation"
[ 18.749] compiled for 1.18.1, module version = 1.0.0
[ 18.749] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.749] (II) Loading sub module "dri2"
[ 18.749] (II) LoadModule: "dri2"
[ 18.749] (II) Module "dri2" already built-in
[ 18.749] (==) Depth 24 pixmap format is 32 bpp
[ 18.749] (II) intel(0): Allocated new frame buffer 1366x768 stride 5632,
tiled
[ 18.751] (II) UXA(0): Driver registered support for the following
operations:
[ 18.751] (II) solid
[ 18.751] (II) copy
[ 18.751] (II) composite (RENDER acceleration)
[ 18.751] (II) put_image
[ 18.751] (II) get_image
[ 18.751] (II) intel(0): [DRI2] Setup complete
[ 18.751] (II) intel(0): [DRI2] DRI driver: i965
[ 18.751] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 18.751] (==) intel(0): Backing store enabled
[ 18.751] (==) intel(0): Silken mouse enabled
[ 18.751] (II) intel(0): Initializing HW Cursor
[ 18.751] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 18.752] (==) intel(0): DPMS enabled
[ 18.752] (==) intel(0): Intel XvMC decoder enabled
[ 18.752] (II) intel(0): Set up textured video
[ 18.752] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 18.752] (II) intel(0): DRI2: Enabled
[ 18.752] (II) intel(0): DRI3: Disabled
[ 18.752] (==) intel(0): hotplug detection: "enabled"
[ 18.764] (--) RandR disabled
[ 18.770] (II) SELinux: Disabled on system
[ 18.791] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.791] (II) AIGLX: enabled GLX_ARB_create_context
[ 18.791] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 18.791] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 18.792] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.792] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.792] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 18.792] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 18.792] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.792] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 18.792] (II) AIGLX: Loaded and initialized i965
[ 18.792] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.792] (II) intel(0): Setting screen physical size to 361 x 203
[ 18.841] (II) Using input driver 'evdev' for 'Mouse0'
[ 18.841] (**) Option "CorePointer"
[ 18.841] (**) Mouse0: always reports core events
[ 18.841] (**) evdev: Mouse0: Device:
"/dev/input/by-path/platform-i8042-serio-1-event-mouse"
[ 18.841] (--) evdev: Mouse0: Vendor 0x2 Product 0x8
[ 18.841] (--) evdev: Mouse0: Found 3 mouse buttons
[ 18.841] (--) evdev: Mouse0: Found relative axes
[ 18.841] (--) evdev: Mouse0: Found x and y relative axes
[ 18.841] (II) evdev: Mouse0: Configuring as mouse
[ 18.841] (**) Option "Emulate3Buttons" "true"
[ 18.841] (**) evdev: Mouse0: YAxisMapping: buttons 4 and 5
[ 18.841] (**) evdev: Mouse0: EmulateWheelButton: 4, EmulateWheelInertia:
10, EmulateWheelTimeout: 200
[ 18.841] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE,
id 6)
[ 18.841] (II) evdev: Mouse0: initialized for relative axes.
[ 18.841] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 18.841] (**) Mouse0: (accel) acceleration profile 0
[ 18.841] (**) Mouse0: (accel) acceleration factor: 2.000
[ 18.841] (**) Mouse0: (accel) acceleration threshold: 4
[ 18.847] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[ 18.847] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.847] (II) Using input driver 'evdev' for 'Power Button'
[ 18.847] (**) Power Button: always reports core events
[ 18.847] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 18.847] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.847] (--) evdev: Power Button: Found keys
[ 18.847] (II) evdev: Power Button: Configuring as keyboard
[ 18.847] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4"
[ 18.847] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 7)
[ 18.847] (**) Option "xkb_rules" "evdev"
[ 18.847] (**) Option "xkb_model" "pc105"
[ 18.847] (**) Option "xkb_layout" "us"
[ 18.847] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 18.847] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.847] (II) Using input driver 'evdev' for 'Video Bus'
[ 18.847] (**) Video Bus: always reports core events
[ 18.847] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 18.847] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 18.847] (--) evdev: Video Bus: Found keys
[ 18.847] (II) evdev: Video Bus: Configuring as keyboard
[ 18.847] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event6"
[ 18.847] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 8)
[ 18.847] (**) Option "xkb_rules" "evdev"
[ 18.847] (**) Option "xkb_model" "pc105"
[ 18.847] (**) Option "xkb_layout" "us"
[ 18.848] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 18.848] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.848] (II) Using input driver 'evdev' for 'Power Button'
[ 18.848] (**) Power Button: always reports core events
[ 18.848] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 18.848] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.848] (--) evdev: Power Button: Found keys
[ 18.848] (II) evdev: Power Button: Configuring as keyboard
[ 18.848] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2"
[ 18.848] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 9)
[ 18.848] (**) Option "xkb_rules" "evdev"
[ 18.848] (**) Option "xkb_model" "pc105"
[ 18.848] (**) Option "xkb_layout" "us"
[ 18.848] (II) config/udev: Adding input device Lid Switch
(/dev/input/event3)
[ 18.848] (II) No input driver specified, ignoring this device.
[ 18.848] (II) This device may have been added with another device file.
[ 18.849] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3
(/dev/input/event10)
[ 18.849] (II) No input driver specified, ignoring this device.
[ 18.849] (II) This device may have been added with another device file.
[ 18.849] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7
(/dev/input/event11)
[ 18.849] (II) No input driver specified, ignoring this device.
[ 18.849] (II) This device may have been added with another device file.
[ 18.849] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8
(/dev/input/event12)
[ 18.849] (II) No input driver specified, ignoring this device.
[ 18.849] (II) This device may have been added with another device file.
[ 18.850] (II) config/udev: Adding input device Kingsis Peripherals Evoluent
VerticalMouse 4 (/dev/input/event1)
[ 18.850] (**) Kingsis Peripherals Evoluent VerticalMouse 4: Applying
InputClass "evdev pointer catchall"
[ 18.850] (II) Using input driver 'evdev' for 'Kingsis Peripherals Evoluent
VerticalMouse 4'
[ 18.850] (**) Kingsis Peripherals Evoluent VerticalMouse 4: always reports
core events
[ 18.850] (**) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Device:
"/dev/input/event1"
[ 18.904] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Vendor
0x1a7c Product 0x191
[ 18.904] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found 10
mouse buttons
[ 18.904] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found
scroll wheel(s)
[ 18.904] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found
relative axes
[ 18.904] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found x
and y relative axes
[ 18.904] (II) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
Configuring as mouse
[ 18.904] (II) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Adding
scrollwheel support
[ 18.904] (**) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
YAxisMapping: buttons 4 and 5
[ 18.904] (**) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.904] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A7C:0191.0001/input/input4/event1"
[ 18.904] (II) XINPUT: Adding extended input device "Kingsis Peripherals
Evoluent VerticalMouse 4" (type: MOUSE, id 10)
[ 18.904] (II) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
initialized for relative axes.
[ 18.904] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel) keeping
acceleration scheme 1
[ 18.904] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel)
acceleration profile 0
[ 18.904] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel)
acceleration factor: 2.000
[ 18.904] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel)
acceleration threshold: 4
[ 18.904] (II) config/udev: Adding input device Kingsis Peripherals Evoluent
VerticalMouse 4 (/dev/input/mouse0)
[ 18.904] (II) No input driver specified, ignoring this device.
[ 18.905] (II) This device may have been added with another device file.
[ 18.905] (II) config/udev: Adding input device Generic USB K/B
(/dev/input/event15)
[ 18.905] (**) Generic USB K/B: Applying InputClass "evdev keyboard catchall"
[ 18.905] (II) Using input driver 'evdev' for 'Generic USB K/B'
[ 18.905] (**) Generic USB K/B: always reports core events
[ 18.905] (**) evdev: Generic USB K/B: Device: "/dev/input/event15"
[ 18.905] (--) evdev: Generic USB K/B: Vendor 0x13ba Product 0x17
[ 18.905] (--) evdev: Generic USB K/B: Found keys
[ 18.905] (II) evdev: Generic USB K/B: Configuring as keyboard
[ 18.905] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:13BA:0017.0002/input/input17/event15"
[ 18.905] (II) XINPUT: Adding extended input device "Generic USB K/B" (type:
KEYBOARD, id 11)
[ 18.905] (**) Option "xkb_rules" "evdev"
[ 18.905] (**) Option "xkb_model" "pc105"
[ 18.905] (**) Option "xkb_layout" "us"
[ 18.906] (II) config/udev: Adding input device Generic USB K/B
(/dev/input/event16)
[ 18.906] (**) Generic USB K/B: Applying InputClass "evdev pointer catchall"
[ 18.906] (**) Generic USB K/B: Applying InputClass "evdev keyboard catchall"
[ 18.906] (II) Using input driver 'evdev' for 'Generic USB K/B'
[ 18.906] (**) Generic USB K/B: always reports core events
[ 18.906] (**) evdev: Generic USB K/B: Device: "/dev/input/event16"
[ 18.906] (--) evdev: Generic USB K/B: Vendor 0x13ba Product 0x17
[ 18.906] (--) evdev: Generic USB K/B: Found 3 mouse buttons
[ 18.906] (--) evdev: Generic USB K/B: Found scroll wheel(s)
[ 18.906] (--) evdev: Generic USB K/B: Found relative axes
[ 18.906] (--) evdev: Generic USB K/B: Found x and y relative axes
[ 18.906] (--) evdev: Generic USB K/B: Found keys
[ 18.906] (II) evdev: Generic USB K/B: Configuring as mouse
[ 18.906] (II) evdev: Generic USB K/B: Configuring as keyboard
[ 18.906] (II) evdev: Generic USB K/B: Adding scrollwheel support
[ 18.906] (**) evdev: Generic USB K/B: YAxisMapping: buttons 4 and 5
[ 18.906] (**) evdev: Generic USB K/B: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.906] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:13BA:0017.0003/input/input18/event16"
[ 18.906] (II) XINPUT: Adding extended input device "Generic USB K/B" (type:
KEYBOARD, id 12)
[ 18.906] (**) Option "xkb_rules" "evdev"
[ 18.906] (**) Option "xkb_model" "pc105"
[ 18.906] (**) Option "xkb_layout" "us"
[ 18.906] (II) evdev: Generic USB K/B: initialized for relative axes.
[ 18.906] (**) Generic USB K/B: (accel) keeping acceleration scheme 1
[ 18.906] (**) Generic USB K/B: (accel) acceleration profile 0
[ 18.906] (**) Generic USB K/B: (accel) acceleration factor: 2.000
[ 18.906] (**) Generic USB K/B: (accel) acceleration threshold: 4
[ 18.906] (II) config/udev: Adding input device Generic USB K/B
(/dev/input/mouse3)
[ 18.906] (II) No input driver specified, ignoring this device.
[ 18.906] (II) This device may have been added with another device file.
[ 18.906] (II) config/udev: Adding input device TOSHIBA Web Camera - FHD
(/dev/input/event17)
[ 18.906] (**) TOSHIBA Web Camera - FHD: Applying InputClass "evdev keyboard
catchall"
[ 18.906] (II) Using input driver 'evdev' for 'TOSHIBA Web Camera - FHD'
[ 18.906] (**) TOSHIBA Web Camera - FHD: always reports core events
[ 18.906] (**) evdev: TOSHIBA Web Camera - FHD: Device: "/dev/input/event17"
[ 18.906] (--) evdev: TOSHIBA Web Camera - FHD: Vendor 0x4f2 Product 0xb3b2
[ 18.906] (--) evdev: TOSHIBA Web Camera - FHD: Found keys
[ 18.906] (II) evdev: TOSHIBA Web Camera - FHD: Configuring as keyboard
[ 18.906] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19/event17"
[ 18.907] (II) XINPUT: Adding extended input device "TOSHIBA Web Camera -
FHD" (type: KEYBOARD, id 13)
[ 18.907] (**) Option "xkb_rules" "evdev"
[ 18.907] (**) Option "xkb_model" "pc105"
[ 18.907] (**) Option "xkb_layout" "us"
[ 18.907] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event7)
[ 18.907] (II) No input driver specified, ignoring this device.
[ 18.907] (II) This device may have been added with another device file.
[ 18.907] (II) config/udev: Adding input device HDA Intel PCH Headphone
(/dev/input/event8)
[ 18.907] (II) No input driver specified, ignoring this device.
[ 18.907] (II) This device may have been added with another device file.
[ 18.907] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 18.907] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 18.907] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.907] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.907] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 18.907] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 18.907] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 18.907] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.907] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.907] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 14)
[ 18.907] (**) Option "xkb_rules" "evdev"
[ 18.907] (**) Option "xkb_model" "pc105"
[ 18.907] (**) Option "xkb_layout" "us"
[ 18.908] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
Stick (/dev/input/event13)
[ 18.908] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev
pointer catchall"
[ 18.908] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 18.908] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 18.908] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device:
"/dev/input/event13"
[ 18.908] (WW) evdev: AlpsPS/2 ALPS DualPoint Stick: device file is
duplicate. Ignoring.
[ 18.924] (EE) PreInit returned 8 for "AlpsPS/2 ALPS DualPoint Stick"
[ 18.924] (II) UnloadModule: "evdev"
[ 18.924] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
Stick (/dev/input/mouse1)
[ 18.924] (II) No input driver specified, ignoring this device.
[ 18.924] (II) This device may have been added with another device file.
[ 18.924] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
TouchPad (/dev/input/event14)
[ 18.924] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 18.924] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev
touchscreen catchall"
[ 18.924] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"touchpad catchall"
[ 18.924] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"Default clickpad buttons"
[ 18.924] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"evdevClass"
[ 18.924] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"touchpadClass"
[ 18.924] (II) LoadModule: "synaptics"
[ 18.925] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 18.925] (II) Module synaptics: vendor="X.Org Foundation"
[ 18.925] compiled for 1.18.0, module version = 1.8.3
[ 18.925] Module class: X.Org XInput Driver
[ 18.925] ABI class: X.Org XInput driver, version 22.1
[ 18.925] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint
TouchPad'
[ 18.925] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 18.925] (**) Option "Device" "/dev/input/event14"
[ 18.984] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad
property
[ 18.984] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 -
4095 (res 42)
[ 18.984] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 -
2047 (res 38)
[ 18.984] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not
report pressure, will use touch data.
[ 18.984] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not
report finger width.
[ 18.984] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left
double triple
[ 18.984] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2
Product 0x8
[ 18.984] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure
range. defaulting to 0 - 255
[ 18.984] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger
width range. defaulting to 0 - 15
[ 18.984] (**) Option "VertEdgeScroll" "1"
[ 18.984] (**) Option "CornerCoasting" "1"
[ 18.984] (**) Option "VertTwoFingerScroll" "1"
[ 18.984] (**) Option "HorizTwoFingerScroll" "1"
[ 18.984] (**) Option "RBCornerButton" "9"
[ 18.984] (**) Option "LBCornerButton" "8"
[ 18.984] (**) Option "TapButton1" "1"
[ 18.984] (**) Option "TapButton2" "2"
[ 18.984] (**) Option "TapButton3" "3"
[ 18.984] (**) Option "CircularScrolling" "1"
[ 18.984] (**) Option "CircScrollTrigger" "7"
[ 18.984] (**) Option "MinSpeed" "0.5"
[ 18.984] (**) Option "MaxSpeed" "1.0"
[ 18.984] (**) Option "AccelFactor" "0.075"
[ 18.984] (**) Option "CoastingSpeed" "8"
[ 18.984] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 18.984] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 18.984] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 19.020] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input3/event14"
[ 19.020] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint
TouchPad" (type: TOUCHPAD, id 15)
[ 19.020] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed
is now constant deceleration 2.0
[ 19.020] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed
is now 2.00
[ 19.020] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel)
AccelFactor is now 0.075
[ 19.020] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping
acceleration scheme 1
[ 19.020] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration
profile 1
[ 19.020] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration
factor: 2.000
[ 19.020] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration
threshold: 4
[ 19.020] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 19.020] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
TouchPad (/dev/input/mouse2)
[ 19.020] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from
InputClass "touchpad ignore duplicates"
[ 19.021] (II) config/udev: Adding input device PC Speaker
(/dev/input/event9)
[ 19.021] (II) No input driver specified, ignoring this device.
[ 19.021] (II) This device may have been added with another device file.
[ 19.021] (II) config/udev: Adding input device Toshiba input device
(/dev/input/event5)
[ 19.021] (**) Toshiba input device: Applying InputClass "evdev keyboard
catchall"
[ 19.021] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 19.021] (**) Toshiba input device: always reports core events
[ 19.021] (**) evdev: Toshiba input device: Device: "/dev/input/event5"
[ 19.021] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 19.021] (--) evdev: Toshiba input device: Found keys
[ 19.021] (II) evdev: Toshiba input device: Configuring as keyboard
[ 19.021] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input8/event5"
[ 19.021] (II) XINPUT: Adding extended input device "Toshiba input device"
(type: KEYBOARD, id 16)
[ 19.021] (**) Option "xkb_rules" "evdev"
[ 19.021] (**) Option "xkb_model" "pc105"
[ 19.021] (**) Option "xkb_layout" "us"
[ 22.858] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 22.858] (II) intel(0): Printing DDC gathered Modelines:
[ 22.858] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 22.860] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 22.860] (II) intel(0): Printing DDC gathered Modelines:
[ 22.860] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 40.023] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 40.023] (II) intel(0): Printing DDC gathered Modelines:
[ 40.023] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 40.078] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 40.078] (II) intel(0): Printing DDC gathered Modelines:
[ 40.078] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 40.134] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 40.134] (II) intel(0): Printing DDC gathered Modelines:
[ 40.134] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 43.044] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 43.044] (II) intel(0): Printing DDC gathered Modelines:
[ 43.044] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 43.107] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 43.108] (II) intel(0): Printing DDC gathered Modelines:
[ 43.108] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 43.163] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680,
tiled
[ 43.254] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 43.254] (II) intel(0): Printing DDC gathered Modelines:
[ 43.254] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 43.308] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 43.308] (II) intel(0): Printing DDC gathered Modelines:
[ 43.308] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 43.364] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 43.364] (II) intel(0): Printing DDC gathered Modelines:
[ 43.364] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 43.422] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 43.422] (II) intel(0): Printing DDC gathered Modelines:
[ 43.422] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 43.499] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 43.500] (II) intel(0): Printing DDC gathered Modelines:
[ 43.500] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1964897
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2004578
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_01
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1993340
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2024551
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1951922
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2004538
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=1958813
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event3
N: input/event3
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event3
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=1997424
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=2001695
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input13/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input13/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2040760
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=2001815
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input14/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input14/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2041043
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=2005020
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2036527
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A7C:0191.0001/input/input4
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A7C:0191.0001/input/input4
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Evoluent_VerticalMouse_4
E: ID_MODEL_ENC=Evoluent\x20VerticalMouse\x204
E: ID_MODEL_ID=0191
E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Kingsis_Peripherals_Evoluent_VerticalMouse_4
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Kingsis_Peripherals
E: ID_VENDOR_ENC=Kingsis\x20Peripherals
E: ID_VENDOR_ID=1a7c
E: KEY=3f0000 0 0 0 0
E:
MODALIAS=input:b0003v1A7Cp0191e0111-e0,1,2,4,k110,111,112,113,114,115,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Kingsis Peripherals Evoluent VerticalMouse 4"
E: PHYS="usb-0000:00:14.0-1.2/input0"
E: PRODUCT=3/1a7c/191/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=1620281
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A7C:0191.0001/input/input4/event1
N: input/event1
S: input/by-id/usb-Kingsis_Peripherals_Evoluent_VerticalMouse_4-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-event-mouse
/dev/input/by-id/usb-Kingsis_Peripherals_Evoluent_VerticalMouse_4-event-mouse
E: DEVNAME=/dev/input/event1
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A7C:0191.0001/input/input4/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Evoluent_VerticalMouse_4
E: ID_MODEL_ENC=Evoluent\x20VerticalMouse\x204
E: ID_MODEL_ID=0191
E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Kingsis_Peripherals_Evoluent_VerticalMouse_4
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Kingsis_Peripherals
E: ID_VENDOR_ENC=Kingsis\x20Peripherals
E: ID_VENDOR_ID=1a7c
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1722021
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A7C:0191.0001/input/input4/mouse0
N: input/mouse0
S: input/by-id/usb-Kingsis_Peripherals_Evoluent_VerticalMouse_4-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-mouse
/dev/input/by-id/usb-Kingsis_Peripherals_Evoluent_VerticalMouse_4-mouse
E: DEVNAME=/dev/input/mouse0
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1A7C:0191.0001/input/input4/mouse0
E: DISPLAY=:0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Evoluent_VerticalMouse_4
E: ID_MODEL_ENC=Evoluent\x20VerticalMouse\x204
E: ID_MODEL_ID=0191
E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Kingsis_Peripherals_Evoluent_VerticalMouse_4
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Kingsis_Peripherals
E: ID_VENDOR_ENC=Kingsis\x20Peripherals
E: ID_VENDOR_ID=1a7c
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1621337
E: XAUTHORITY=/home/tim/.Xauthority
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:13BA:0017.0002/input/input17
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:13BA:0017.0002/input/input17
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Generic_USB_K_B
E: ID_MODEL_ENC=Generic\x20USB\x20K\x2fB
E: ID_MODEL_ID=0017
E: ID_PATH=pci-0000:00:14.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_3_1_0
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Generic_USB_K_B
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
E: LED=1f
E:
MODALIAS=input:b0003v13BAp0017e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Generic USB K/B"
E: PHYS="usb-0000:00:14.0-1.3/input0"
E: PRODUCT=3/13ba/17/110
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2547969
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:13BA:0017.0002/input/input17/event15
N: input/event15
S: input/by-id/usb-13ba_Generic_USB_K_B-event-kbd
S: input/by-path/pci-0000:00:14.0-usb-0:1.3:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:1.3:1.0-event-kbd
/dev/input/by-id/usb-13ba_Generic_USB_K_B-event-kbd
E: DEVNAME=/dev/input/event15
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:13BA:0017.0002/input/input17/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Generic_USB_K_B
E: ID_MODEL_ENC=Generic\x20USB\x20K\x2fB
E: ID_MODEL_ID=0017
E: ID_PATH=pci-0000:00:14.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_3_1_0
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Generic_USB_K_B
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2581039
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:13BA:0017.0003/input/input18
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:13BA:0017.0003/input/input18
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_3_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Generic_USB_K_B
E: ID_MODEL_ENC=Generic\x20USB\x20K\x2fB
E: ID_MODEL_ID=0017
E: ID_PATH=pci-0000:00:14.0-usb-0:1.3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_3_1_1
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Generic_USB_K_B
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: KEY=40000000000000 0 70000 0 40000010cc00 10000000000000 0
E:
MODALIAS=input:b0003v13BAp0017e0110-e0,1,2,4,k74,8A,8B,8E,8F,94,AE,110,111,112,1B6,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Generic USB K/B"
E: PHYS="usb-0000:00:14.0-1.3/input1"
E: PRODUCT=3/13ba/17/110
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2548394
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:13BA:0017.0003/input/input18/event16
N: input/event16
S: input/by-id/usb-13ba_Generic_USB_K_B-if01-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:1.3:1.1-event-mouse
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:1.3:1.1-event-mouse
/dev/input/by-id/usb-13ba_Generic_USB_K_B-if01-event-mouse
E: DEVNAME=/dev/input/event16
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:13BA:0017.0003/input/input18/event16
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Generic_USB_K_B
E: ID_MODEL_ENC=Generic\x20USB\x20K\x2fB
E: ID_MODEL_ID=0017
E: ID_PATH=pci-0000:00:14.0-usb-0:1.3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_3_1_1
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Generic_USB_K_B
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2589118
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P:
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:13BA:0017.0003/input/input18/mouse3
N: input/mouse3
S: input/by-id/usb-13ba_Generic_USB_K_B-if01-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:1.3:1.1-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:1.3:1.1-mouse
/dev/input/by-id/usb-13ba_Generic_USB_K_B-if01-mouse
E: DEVNAME=/dev/input/mouse3
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:13BA:0017.0003/input/input18/mouse3
E: DISPLAY=:0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Generic_USB_K_B
E: ID_MODEL_ENC=Generic\x20USB\x20K\x2fB
E: ID_MODEL_ID=0017
E: ID_PATH=pci-0000:00:14.0-usb-0:1.3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_3_1_1
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Generic_USB_K_B
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: MAJOR=13
E: MINOR=35
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2551593
E: XAUTHORITY=/home/tim/.Xauthority
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_7_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=TOSHIBA_Web_Camera_-_FHD
E: ID_MODEL_ENC=TOSHIBA\x20Web\x20Camera\x20-\x20FHD
E: ID_MODEL_ID=b3b2
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=8373
E: ID_SERIAL=Chicony_Electronics_Co._Ltd._TOSHIBA_Web_Camera_-_FHD_0x0001
E: ID_SERIAL_SHORT=0x0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co._Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd.
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB3B2e8373-e0,1,kD4,ramlsfw
E: NAME="TOSHIBA Web Camera - FHD"
E: PHYS="usb-0000:00:14.0-7/button"
E: PRODUCT=3/4f2/b3b2/8373
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2556913
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19/event17
N: input/event17
S:
input/by-id/usb-Chicony_Electronics_Co._Ltd._TOSHIBA_Web_Camera_-_FHD_0x0001-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: BACKSPACE=guess
E:
DEVLINKS=/dev/input/by-id/usb-Chicony_Electronics_Co._Ltd._TOSHIBA_Web_Camera_-_FHD_0x0001-event-if00
/dev/input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: DEVNAME=/dev/input/event17
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19/event17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=TOSHIBA_Web_Camera_-_FHD
E: ID_MODEL_ENC=TOSHIBA\x20Web\x20Camera\x20-\x20FHD
E: ID_MODEL_ID=b3b2
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=8373
E: ID_SERIAL=Chicony_Electronics_Co._Ltd._TOSHIBA_Web_Camera_-_FHD_0x0001
E: ID_SERIAL_SHORT=0x0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co._Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd.
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2600927
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=1999242
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2040762
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=1998360
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2024966
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E:
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=673031
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1589542
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input16
E: DEVPATH=/devices/platform/i8042/serio1/input/input16
E: EV=7
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0011v0002p0008e0700-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="AlpsPS/2 ALPS DualPoint Stick"
E: PHYS="isa0060/serio1/input1"
E: PRODUCT=11/2/8/700
E: PROP=21
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2014235
P: /devices/platform/i8042/serio1/input/input16/event13
N: input/event13
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/platform/i8042/serio1/input/input16/event13
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2044685
P: /devices/platform/i8042/serio1/input/input16/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/input/input16/mouse1
E: DISPLAY=:0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2015776
E: XAUTHORITY=/home/tim/.Xauthority
P: /devices/platform/i8042/serio1/input/input3
E: ABS=260800000000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input3
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e520 10000 0 0 0 0
E:
MODALIAS=input:b0011v0002p0008e0700-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,2F,35,36,39,mlsfw
E: NAME="AlpsPS/2 ALPS DualPoint TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/8/700
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2016065
P: /devices/platform/i8042/serio1/input/input3/event14
N: input/event14
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/platform/i8042/serio1/input/input3/event14
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=53
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=97
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2044542
P: /devices/platform/i8042/serio1/input/input3/mouse2
N: input/mouse2
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/platform/i8042/serio1/input/input3/mouse2
E: DISPLAY=:0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2017832
E: XAUTHORITY=/home/tim/.Xauthority
P: /devices/platform/pcspkr/input/input12
E: DEVPATH=/devices/platform/pcspkr/input/input12
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1996142
P: /devices/platform/pcspkr/input/input12/event9
N: input/event9
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/platform/pcspkr/input/input12/event9
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2040601
P: /devices/virtual/input/input8
E: DEVPATH=/devices/virtual/input/input8
E: EV=13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=40000 10000 1c00000000 0 0 81501f00002000 3809604001 2000000000000 8000
E:
MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k71,80,8E,95,96,98,9B,A3,A4,A5,CD,E0,E1,E2,E3,E4,EC,EE,F0,F7,1A2,1A3,1A4,1D0,212,ram4,lsfw
E: MSC=10
E: NAME="Toshiba input device"
E: PHYS="toshiba_acpi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1984976
P: /devices/virtual/input/input8/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/virtual/input/input8/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2024450
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 0.596809] Linux agpgart interface v0.103
[ 1.661850] [drm] Initialized drm 1.1.0 20060810
[ 1.682603] [drm] Memory usable by graphics device = 2048M
[ 1.682607] [drm] Replacing VGA console driver
[ 1.693991] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.693993] [drm] Driver supports precise vblank timestamp query.
[ 1.729093] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
[ 1.729528] fbcon: inteldrmfb (fb0) is primary device
[ 2.743090] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.21-8
ii libdrm-intel1 2.4.67-1
ii libdrm2 2.4.67-1
ii libpciaccess0 0.13.4-1
ii libpixman-1-0 0.33.6-1
ii libudev1 229-1
ii libx11-6 2:1.6.3-1
ii libx11-xcb1 2:1.6.3-1
ii libxcb-dri2-0 1.11.1-1
ii libxcb-dri3-0 1.11.1-1
ii libxcb-sync1 1.11.1-1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.11.1-1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b2
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.5.0-1
ii libxrender1 1:0.9.9-2
ii libxshmfence1 1.2-1
ii libxss1 1:1.2.2-1
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.9-1
ii xserver-xorg-core [xorg-video-abi-20] 2:1.18.1-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
[ 19.768]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 19.768] X Protocol Version 11, Revision 0
[ 19.768] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 19.768] Current Operating System: Linux pauling 4.3.0-1-amd64 #1 SMP
Debian 4.3.5-1 (2016-02-06) x86_64
[ 19.768] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64
root=UUID=cf03ef23-6da4-4135-81bf-e68c6be5ab98 ro quiet
[ 19.768] Build Date: 09 February 2016 11:06:03AM
[ 19.768] xorg-server 2:1.18.1-1 (http://www.debian.org/support)
[ 19.768] Current version of pixman: 0.33.6
[ 19.768] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.768] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.768] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 17 10:07:13
2016
[ 19.770] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.770] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.771] (==) ServerLayout "X.org Configured"
[ 19.771] (**) |-->Screen "Screen0" (0)
[ 19.771] (**) | |-->Monitor "Monitor0"
[ 19.772] (**) | |-->Device "Card0"
[ 19.772] (**) |-->Input Device "Mouse0"
[ 19.772] (**) |-->Input Device "Keyboard0"
[ 19.772] (==) Automatically adding devices
[ 19.772] (==) Automatically enabling devices
[ 19.772] (==) Automatically adding GPU devices
[ 19.772] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 19.773] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.773] Entry deleted from font path.
[ 19.773] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 19.773] Entry deleted from font path.
[ 19.773] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19.773] Entry deleted from font path.
[ 19.774] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 19.774] Entry deleted from font path.
[ 19.774] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19.774] Entry deleted from font path.
[ 19.774] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.774] Entry deleted from font path.
[ 19.774] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 19.774] Entry deleted from font path.
[ 19.774] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19.774] Entry deleted from font path.
[ 19.774] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 19.774] Entry deleted from font path.
[ 19.775] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19.775] Entry deleted from font path.
[ 19.775] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 19.775] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 19.775] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.
[ 19.775] (WW) Disabling Keyboard0
[ 19.775] (II) Loader magic: 0x5630725ebdc0
[ 19.775] (II) Module ABI versions:
[ 19.775] X.Org ANSI C Emulation: 0.4
[ 19.775] X.Org Video Driver: 20.0
[ 19.775] X.Org XInput driver : 22.1
[ 19.775] X.Org Server Extension : 9.0
[ 19.775] (++) using VT number 7
[ 19.775] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[ 19.776] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.777] (--) PCI:*(0:0:2:0) 8086:0a16:1179:0005 rev 11, Mem @
0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 19.777] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 19.777] (II) LoadModule: "glx"
[ 19.779] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19.787] (II) Module glx: vendor="X.Org Foundation"
[ 19.787] compiled for 1.18.1, module version = 1.0.0
[ 19.787] ABI class: X.Org Server Extension, version 9.0
[ 19.787] (==) AIGLX enabled
[ 19.787] (II) LoadModule: "intel"
[ 19.787] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.789] (II) Module intel: vendor="X.Org Foundation"
[ 19.789] compiled for 1.18.0, module version = 2.99.917
[ 19.789] Module class: X.Org Video Driver
[ 19.789] ABI class: X.Org Video Driver, version 20.0
[ 19.789] (II) LoadModule: "evdev"
[ 19.790] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.791] (II) Module evdev: vendor="X.Org Foundation"
[ 19.791] compiled for 1.18.0, module version = 2.10.1
[ 19.791] Module class: X.Org XInput Driver
[ 19.791] ABI class: X.Org XInput driver, version 22.1
[ 19.792] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 19.792] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 19.792] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 19.792] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[ 19.792] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 19.792] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 19.798] (II) intel(0): Using Kernel Mode Setting driver: i915, version
1.6.0 20150731
[ 19.798] (II) intel(0): SNA compiled: xserver-xorg-video-intel
2:2.99.917+git20160127-1+b1 (amd64 Build Daemon (binet)
<buildd-bi...@buildd.debian.org>)
[ 19.798] (II) intel(0): SNA compiled for use with valgrind
[ 19.799] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
4400
[ 19.799] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2,
avx, avx2; using a maximum of 2 threads
[ 19.799] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 19.799] (==) intel(0): RGB weight 888
[ 19.799] (==) intel(0): Default visual is TrueColor
[ 19.799] (II) intel(0): Output eDP1 using monitor section Monitor0
[ 19.820] (--) intel(0): Found backlight control interface intel_backlight
(type 'raw') for output eDP1
[ 19.820] (II) intel(0): Enabled output eDP1
[ 19.820] (II) intel(0): Output DP1 has no monitor section
[ 19.820] (II) intel(0): Enabled output DP1
[ 19.820] (II) intel(0): Output HDMI1 has no monitor section
[ 19.820] (II) intel(0): Enabled output HDMI1
[ 19.820] (II) intel(0): Output DP2 has no monitor section
[ 19.820] (II) intel(0): Enabled output DP2
[ 19.820] (II) intel(0): Output HDMI2 has no monitor section
[ 19.820] (II) intel(0): Enabled output HDMI2
[ 19.820] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 19.820] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 19.820] (II) intel(0): Enabled output VIRTUAL1
[ 19.820] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 19.820] (==) intel(0): TearFree disabled
[ 19.820] (==) intel(0): DPI set to (96, 96)
[ 19.820] (II) Loading sub module "dri2"
[ 19.820] (II) LoadModule: "dri2"
[ 19.820] (II) Module "dri2" already built-in
[ 19.820] (II) Loading sub module "present"
[ 19.820] (II) LoadModule: "present"
[ 19.820] (II) Module "present" already built-in
[ 19.820] (==) Depth 24 pixmap format is 32 bpp
[ 19.823] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 19.823] (==) intel(0): Backing store enabled
[ 19.823] (==) intel(0): Silken mouse enabled
[ 19.823] (II) intel(0): HW Cursor enabled
[ 19.823] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 19.824] (==) intel(0): DPMS enabled
[ 19.824] (==) intel(0): Display hotplug detection enabled
[ 19.824] (II) intel(0): [DRI2] Setup complete
[ 19.824] (II) intel(0): [DRI2] DRI driver: i965
[ 19.824] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 19.824] (II) intel(0): direct rendering: DRI2 enabled
[ 19.824] (II) intel(0): hardware support for Present enabled
[ 19.824] (--) RandR disabled
[ 19.828] (II) SELinux: Disabled on system
[ 19.845] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.845] (II) AIGLX: enabled GLX_ARB_create_context
[ 19.845] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 19.845] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 19.845] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.845] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.845] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 19.845] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 19.845] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.845] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 19.845] (II) AIGLX: Loaded and initialized i965
[ 19.845] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.847] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 19.847] (II) intel(0): Setting screen physical size to 361 x 203
[ 19.890] (II) Using input driver 'evdev' for 'Mouse0'
[ 19.890] (**) Option "CorePointer"
[ 19.890] (**) Mouse0: always reports core events
[ 19.890] (**) evdev: Mouse0: Device:
"/dev/input/by-path/platform-i8042-serio-1-event-mouse"
[ 19.890] (--) evdev: Mouse0: Vendor 0x2 Product 0x8
[ 19.890] (--) evdev: Mouse0: Found 1 mouse buttons
[ 19.890] (--) evdev: Mouse0: Found absolute axes
[ 19.890] (--) evdev: Mouse0: Found absolute multitouch axes
[ 19.890] (--) evdev: Mouse0: Found x and y absolute axes
[ 19.890] (--) evdev: Mouse0: Found absolute touchpad.
[ 19.890] (II) evdev: Mouse0: Configuring as touchpad
[ 19.890] (**) Option "Emulate3Buttons" "true"
[ 19.890] (**) evdev: Mouse0: YAxisMapping: buttons 4 and 5
[ 19.890] (**) evdev: Mouse0: EmulateWheelButton: 4, EmulateWheelInertia:
10, EmulateWheelTimeout: 200
[ 19.890] (II) XINPUT: Adding extended input device "Mouse0" (type:
TOUCHPAD, id 6)
[ 19.890] (II) evdev: Mouse0: initialized for absolute axes.
[ 19.891] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 19.891] (**) Mouse0: (accel) acceleration profile 0
[ 19.891] (**) Mouse0: (accel) acceleration factor: 2.000
[ 19.891] (**) Mouse0: (accel) acceleration threshold: 4
[ 19.896] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[ 19.896] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.896] (II) Using input driver 'evdev' for 'Power Button'
[ 19.896] (**) Power Button: always reports core events
[ 19.896] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 19.896] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.896] (--) evdev: Power Button: Found keys
[ 19.896] (II) evdev: Power Button: Configuring as keyboard
[ 19.896] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4"
[ 19.896] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 7)
[ 19.896] (**) Option "xkb_rules" "evdev"
[ 19.896] (**) Option "xkb_model" "pc105"
[ 19.896] (**) Option "xkb_layout" "us"
[ 19.896] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 19.896] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.896] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.896] (**) Video Bus: always reports core events
[ 19.896] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 19.896] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.896] (--) evdev: Video Bus: Found keys
[ 19.896] (II) evdev: Video Bus: Configuring as keyboard
[ 19.896] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event6"
[ 19.896] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 8)
[ 19.896] (**) Option "xkb_rules" "evdev"
[ 19.896] (**) Option "xkb_model" "pc105"
[ 19.896] (**) Option "xkb_layout" "us"
[ 19.897] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 19.897] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.897] (II) Using input driver 'evdev' for 'Power Button'
[ 19.897] (**) Power Button: always reports core events
[ 19.897] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 19.897] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.897] (--) evdev: Power Button: Found keys
[ 19.897] (II) evdev: Power Button: Configuring as keyboard
[ 19.897] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2"
[ 19.897] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 9)
[ 19.897] (**) Option "xkb_rules" "evdev"
[ 19.897] (**) Option "xkb_model" "pc105"
[ 19.897] (**) Option "xkb_layout" "us"
[ 19.897] (II) config/udev: Adding input device Lid Switch
(/dev/input/event3)
[ 19.897] (II) No input driver specified, ignoring this device.
[ 19.897] (II) This device may have been added with another device file.
[ 19.897] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3
(/dev/input/event9)
[ 19.897] (II) No input driver specified, ignoring this device.
[ 19.897] (II) This device may have been added with another device file.
[ 19.898] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7
(/dev/input/event10)
[ 19.898] (II) No input driver specified, ignoring this device.
[ 19.898] (II) This device may have been added with another device file.
[ 19.898] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8
(/dev/input/event11)
[ 19.898] (II) No input driver specified, ignoring this device.
[ 19.898] (II) This device may have been added with another device file.
[ 19.898] (II) config/udev: Adding input device Kingsis Peripherals Evoluent
VerticalMouse 4 (/dev/input/event1)
[ 19.898] (**) Kingsis Peripherals Evoluent VerticalMouse 4: Applying
InputClass "evdev pointer catchall"
[ 19.898] (II) Using input driver 'evdev' for 'Kingsis Peripherals Evoluent
VerticalMouse 4'
[ 19.898] (**) Kingsis Peripherals Evoluent VerticalMouse 4: always reports
core events
[ 19.898] (**) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Device:
"/dev/input/event1"
[ 19.952] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Vendor
0x1a7c Product 0x191
[ 19.952] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found 10
mouse buttons
[ 19.952] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found
scroll wheel(s)
[ 19.952] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found
relative axes
[ 19.952] (--) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Found x
and y relative axes
[ 19.952] (II) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
Configuring as mouse
[ 19.952] (II) evdev: Kingsis Peripherals Evoluent VerticalMouse 4: Adding
scrollwheel support
[ 19.952] (**) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
YAxisMapping: buttons 4 and 5
[ 19.952] (**) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.952] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:1A7C:0191.0001/input/input4/event1"
[ 19.952] (II) XINPUT: Adding extended input device "Kingsis Peripherals
Evoluent VerticalMouse 4" (type: MOUSE, id 10)
[ 19.952] (II) evdev: Kingsis Peripherals Evoluent VerticalMouse 4:
initialized for relative axes.
[ 19.952] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel) keeping
acceleration scheme 1
[ 19.952] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel)
acceleration profile 0
[ 19.952] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel)
acceleration factor: 2.000
[ 19.952] (**) Kingsis Peripherals Evoluent VerticalMouse 4: (accel)
acceleration threshold: 4
[ 19.952] (II) config/udev: Adding input device Kingsis Peripherals Evoluent
VerticalMouse 4 (/dev/input/mouse0)
[ 19.953] (II) No input driver specified, ignoring this device.
[ 19.953] (II) This device may have been added with another device file.
[ 19.953] (II) config/udev: Adding input device Generic USB K/B
(/dev/input/event15)
[ 19.953] (**) Generic USB K/B: Applying InputClass "evdev keyboard catchall"
[ 19.953] (II) Using input driver 'evdev' for 'Generic USB K/B'
[ 19.953] (**) Generic USB K/B: always reports core events
[ 19.953] (**) evdev: Generic USB K/B: Device: "/dev/input/event15"
[ 19.953] (--) evdev: Generic USB K/B: Vendor 0x13ba Product 0x17
[ 19.953] (--) evdev: Generic USB K/B: Found keys
[ 19.953] (II) evdev: Generic USB K/B: Configuring as keyboard
[ 19.953] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:13BA:0017.0002/input/input17/event15"
[ 19.953] (II) XINPUT: Adding extended input device "Generic USB K/B" (type:
KEYBOARD, id 11)
[ 19.953] (**) Option "xkb_rules" "evdev"
[ 19.953] (**) Option "xkb_model" "pc105"
[ 19.953] (**) Option "xkb_layout" "us"
[ 19.954] (II) config/udev: Adding input device Generic USB K/B
(/dev/input/event16)
[ 19.954] (**) Generic USB K/B: Applying InputClass "evdev pointer catchall"
[ 19.954] (**) Generic USB K/B: Applying InputClass "evdev keyboard catchall"
[ 19.954] (II) Using input driver 'evdev' for 'Generic USB K/B'
[ 19.954] (**) Generic USB K/B: always reports core events
[ 19.954] (**) evdev: Generic USB K/B: Device: "/dev/input/event16"
[ 19.954] (--) evdev: Generic USB K/B: Vendor 0x13ba Product 0x17
[ 19.954] (--) evdev: Generic USB K/B: Found 3 mouse buttons
[ 19.954] (--) evdev: Generic USB K/B: Found scroll wheel(s)
[ 19.954] (--) evdev: Generic USB K/B: Found relative axes
[ 19.954] (--) evdev: Generic USB K/B: Found x and y relative axes
[ 19.954] (--) evdev: Generic USB K/B: Found keys
[ 19.954] (II) evdev: Generic USB K/B: Configuring as mouse
[ 19.954] (II) evdev: Generic USB K/B: Configuring as keyboard
[ 19.954] (II) evdev: Generic USB K/B: Adding scrollwheel support
[ 19.954] (**) evdev: Generic USB K/B: YAxisMapping: buttons 4 and 5
[ 19.954] (**) evdev: Generic USB K/B: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.954] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:13BA:0017.0003/input/input18/event16"
[ 19.954] (II) XINPUT: Adding extended input device "Generic USB K/B" (type:
KEYBOARD, id 12)
[ 19.954] (**) Option "xkb_rules" "evdev"
[ 19.954] (**) Option "xkb_model" "pc105"
[ 19.954] (**) Option "xkb_layout" "us"
[ 19.954] (II) evdev: Generic USB K/B: initialized for relative axes.
[ 19.954] (**) Generic USB K/B: (accel) keeping acceleration scheme 1
[ 19.954] (**) Generic USB K/B: (accel) acceleration profile 0
[ 19.954] (**) Generic USB K/B: (accel) acceleration factor: 2.000
[ 19.954] (**) Generic USB K/B: (accel) acceleration threshold: 4
[ 19.954] (II) config/udev: Adding input device Generic USB K/B
(/dev/input/mouse3)
[ 19.954] (II) No input driver specified, ignoring this device.
[ 19.954] (II) This device may have been added with another device file.
[ 19.955] (II) config/udev: Adding input device TOSHIBA Web Camera - FHD
(/dev/input/event17)
[ 19.955] (**) TOSHIBA Web Camera - FHD: Applying InputClass "evdev keyboard
catchall"
[ 19.955] (II) Using input driver 'evdev' for 'TOSHIBA Web Camera - FHD'
[ 19.955] (**) TOSHIBA Web Camera - FHD: always reports core events
[ 19.955] (**) evdev: TOSHIBA Web Camera - FHD: Device: "/dev/input/event17"
[ 19.955] (--) evdev: TOSHIBA Web Camera - FHD: Vendor 0x4f2 Product 0xb3b2
[ 19.955] (--) evdev: TOSHIBA Web Camera - FHD: Found keys
[ 19.955] (II) evdev: TOSHIBA Web Camera - FHD: Configuring as keyboard
[ 19.955] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input19/event17"
[ 19.955] (II) XINPUT: Adding extended input device "TOSHIBA Web Camera -
FHD" (type: KEYBOARD, id 13)
[ 19.955] (**) Option "xkb_rules" "evdev"
[ 19.955] (**) Option "xkb_model" "pc105"
[ 19.955] (**) Option "xkb_layout" "us"
[ 19.955] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event7)
[ 19.955] (II) No input driver specified, ignoring this device.
[ 19.955] (II) This device may have been added with another device file.
[ 19.955] (II) config/udev: Adding input device HDA Intel PCH Headphone
(/dev/input/event8)
[ 19.955] (II) No input driver specified, ignoring this device.
[ 19.955] (II) This device may have been added with another device file.
[ 19.956] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 19.956] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 19.956] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 19.956] (**) AT Translated Set 2 keyboard: always reports core events
[ 19.956] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 19.956] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 19.956] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 19.956] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 19.956] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 19.956] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 14)
[ 19.956] (**) Option "xkb_rules" "evdev"
[ 19.956] (**) Option "xkb_model" "pc105"
[ 19.956] (**) Option "xkb_layout" "us"
[ 19.956] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
Stick (/dev/input/event13)
[ 19.956] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev
pointer catchall"
[ 19.956] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 19.956] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 19.956] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device:
"/dev/input/event13"
[ 19.956] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[ 19.956] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[ 19.956] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[ 19.956] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative
axes
[ 19.956] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[ 19.956] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4
and 5
[ 19.956] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.956] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input16/event13"
[ 19.956] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint
Stick" (type: MOUSE, id 15)
[ 19.956] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for
relative axes.
[ 19.956] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) keeping acceleration
scheme 1
[ 19.956] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration profile 0
[ 19.956] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor:
2.000
[ 19.956] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration
threshold: 4
[ 19.956] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
Stick (/dev/input/mouse1)
[ 19.956] (II) No input driver specified, ignoring this device.
[ 19.956] (II) This device may have been added with another device file.
[ 19.957] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
TouchPad (/dev/input/event14)
[ 19.957] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 19.957] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev
touchscreen catchall"
[ 19.957] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"touchpad catchall"
[ 19.957] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"Default clickpad buttons"
[ 19.957] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"evdevClass"
[ 19.957] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"touchpadClass"
[ 19.957] (II) LoadModule: "synaptics"
[ 19.957] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19.957] (II) Module synaptics: vendor="X.Org Foundation"
[ 19.957] compiled for 1.18.0, module version = 1.8.3
[ 19.957] Module class: X.Org XInput Driver
[ 19.957] ABI class: X.Org XInput driver, version 22.1
[ 19.957] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint
TouchPad'
[ 19.957] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 19.957] (**) Option "Device" "/dev/input/event14"
[ 19.996] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad
property
[ 19.996] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 -
4095 (res 42)
[ 19.996] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 -
2047 (res 38)
[ 19.996] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not
report pressure, will use touch data.
[ 19.996] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not
report finger width.
[ 19.996] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left
double triple
[ 19.996] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2
Product 0x8
[ 19.996] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure
range. defaulting to 0 - 255
[ 19.996] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger
width range. defaulting to 0 - 15
[ 19.996] (**) Option "VertEdgeScroll" "1"
[ 19.996] (**) Option "CornerCoasting" "1"
[ 19.996] (**) Option "VertTwoFingerScroll" "1"
[ 19.996] (**) Option "HorizTwoFingerScroll" "1"
[ 19.996] (**) Option "RBCornerButton" "9"
[ 19.996] (**) Option "LBCornerButton" "8"
[ 19.996] (**) Option "TapButton1" "1"
[ 19.996] (**) Option "TapButton2" "2"
[ 19.996] (**) Option "TapButton3" "3"
[ 19.996] (**) Option "CircularScrolling" "1"
[ 19.996] (**) Option "CircScrollTrigger" "7"
[ 19.996] (**) Option "MinSpeed" "0.5"
[ 19.996] (**) Option "MaxSpeed" "1.0"
[ 19.996] (**) Option "AccelFactor" "0.075"
[ 19.996] (**) Option "CoastingSpeed" "8"
[ 19.996] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 19.996] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 19.996] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 20.008] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input3/event14"
[ 20.008] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint
TouchPad" (type: TOUCHPAD, id 16)
[ 20.008] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed
is now constant deceleration 2.0
[ 20.008] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed
is now 2.00
[ 20.008] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel)
AccelFactor is now 0.075
[ 20.008] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping
acceleration scheme 1
[ 20.008] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration
profile 1
[ 20.008] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration
factor: 2.000
[ 20.008] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration
threshold: 4
[ 20.008] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 20.008] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint
TouchPad (/dev/input/mouse2)
[ 20.008] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from
InputClass "touchpad ignore duplicates"
[ 20.009] (II) config/udev: Adding input device PC Speaker
(/dev/input/event12)
[ 20.009] (II) No input driver specified, ignoring this device.
[ 20.009] (II) This device may have been added with another device file.
[ 20.009] (II) config/udev: Adding input device Toshiba input device
(/dev/input/event5)
[ 20.009] (**) Toshiba input device: Applying InputClass "evdev keyboard
catchall"
[ 20.009] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 20.009] (**) Toshiba input device: always reports core events
[ 20.009] (**) evdev: Toshiba input device: Device: "/dev/input/event5"
[ 20.009] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 20.009] (--) evdev: Toshiba input device: Found keys
[ 20.009] (II) evdev: Toshiba input device: Configuring as keyboard
[ 20.009] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input8/event5"
[ 20.009] (II) XINPUT: Adding extended input device "Toshiba input device"
(type: KEYBOARD, id 17)
[ 20.009] (**) Option "xkb_rules" "evdev"
[ 20.009] (**) Option "xkb_model" "pc105"
[ 20.009] (**) Option "xkb_layout" "us"
[ 21.822] (II) intel(0): EDID vendor "CMN", prod id 4949
[ 21.822] (II) intel(0): Printing DDC gathered Modelines:
[ 21.822] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479
1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 58.282] (II) intel(0): resizing framebuffer to 1920x1080
[ 58.298] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0,
position (554, 312), rotation normal, reflection none
[ 58.299] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe
1, position (0, 0), rotation normal, reflection none
[ 108.257] (EE)
[ 108.257] (EE) Backtrace:
[ 108.257] (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e) [0x563072362b2e]
[ 108.257] (EE) 1: /usr/lib/xorg/Xorg (0x5630721ad000+0x1b9eb9)
[0x563072366eb9]
[ 108.257] (EE) 2: /lib/x86_64-linux-gnu/libc.so.6 (0x7f0b67e7f000+0x33590)
[0x7f0b67eb2590]
[ 108.257] (EE) 3: /lib/x86_64-linux-gnu/libc.so.6 (0x7f0b67e7f000+0x78698)
[0x7f0b67ef7698]
[ 108.257] (EE) 4: /lib/x86_64-linux-gnu/libc.so.6 (__libc_calloc+0xd5)
[0x7f0b67efa445]
[ 108.257] (EE) 5: /usr/lib/xorg/Xorg (0x5630721ad000+0x50952)
[0x5630721fd952]
[ 108.257] (EE) 6: /usr/lib/xorg/Xorg (0x5630721ad000+0x53adf)
[0x563072200adf]
[ 108.257] (EE) 7: /usr/lib/xorg/Xorg (0x5630721ad000+0x57af3)
[0x563072204af3]
[ 108.257] (EE) 8: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf0)
[0x7f0b67e9f870]
[ 108.257] (EE) 9: /usr/lib/xorg/Xorg (_start+0x29) [0x5630721eee89]
[ 108.257] (EE)
[ 108.257] (EE) Bus error at address 0x0
[ 108.257] (EE)
Fatal server error:
[ 108.257] (EE) Caught signal 7 (Bus error). Server aborting
[ 108.258] (EE)
[ 108.258] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 108.258] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[ 108.258] (EE)
[ 108.258] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 108.527] (EE) Server terminated with error (1). Closing log file.
