Package: xserver-xorg-video-nouveau
Version: 1:1.0.11-1+b1
Severity: normal
Dear Maintainer,
Thanks for maintaining Debian's nouveau driver.
It's great to have an open alternative.
The main reason I'm writing is that a recent
$ aptitude full-upgrade
and reboot, failed to run X.
xorg's log file said something like
(EE) [drm] KMS not enabled
My understanding is that KMS is an acronym for
kernel mode switching, which is now code in the
kernel for quickly switching between console and
graphical video modes.
Evidently X didn't think my kernel supported KMS.
However
I was using 3.0
and
https://wiki.debian.org/KernelModesetting says
it has been supported since kernel image
version 2.6.29.
Upgrading my kernel to 4.0 fixed it.
It seems to me that the xserver-xorg-video-nouveau
package might be improved by making it depend on
version 4.0 or later of a kernel package.
For what it's worth, a kernel maintainer (Ben
Hutchings) wrote on the OFTC network's IRC channel
#debian-kernel that there's no way to write a
dependency on a certain kernel version, it won't
do any good, on most architectures, there are
multiple kernel flavours and even if you listed
all the flavours as alternative dependencies, it
wouldn't be satisfied by *newer* upstream versions
or by custom kernel packages.
Maybe Ben is right, but if he is, I keep finding
myself asking: Can we really only rely on trial
and error to match application and kernel
versions?
I don't see why xserver-xorg-video-nouveau
couldn't at least depend on version 4.0 of the
linux kernel being installed with something like
Depends: linux-image-686-pae (>= 4.0) | linux-image-amd64 (>= 4.0)
Maybe more architectures could be or-ed.
Thanks,
Kingsley
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 13 2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2544344 May 4 15:49 /usr/bin/Xorg
Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2
by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by
glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0
by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by
glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by
glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by
glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so
by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to
/usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7200
GS / 7300 SE] [10de:01d3] (rev a1)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 6917 Dec 13 2013 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 (buildd@biber) Mon Aug 8 18:26:13 UTC 2011
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/psaux"
# Option "Protocol" "ImPS/2"
#EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
# KGMJR Aug 17, 2011 Commented "Trackman Marble"
# and added a config file in the newly created
# /etc/X11/xorg.conf.d/ directory.
# InputDevice "Trackman Marble"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
#Section "InputDevice"
# Does not emulate scroll wheel or a middle
# button. KGMJR Aug 15, 2011
### Option "EmulateWheel" "true"
### Option "Device" "/dev/input/mice"
### Option "Protocol" "ExplorerPS/2"
## Option "Buttons" "5"
## Option "ButtonMapping" "1 8 3 6 7"
# Option "ButtonMapping" "1 8 3 6 7"
## Option "EmulateWheelButton" "6"
## Option "XAxisMapping" "4 5"
# Identifier "Trackman Marble"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/psaux"
# Option "Protocol" "ImPS/2"
### Option "Emulate3Buttons" "true"
# Option "Emulate3Buttons" "true"
# Option "EmulateWheel" "true"
# Option "EmulateWheelButton" "2"
## Option "EmulateWheelButton" "8"
# KGMJR Aug 15, 2011 Try configuration that worked
# before upgrading Xorg.
# Identifier "Trackman Marble"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/psaux"
# Option "Protocol" "ImPS/2"
# Option "EmulateWheel" "true"
# Option "EmulateWheelButton" "2"
#EndSection
# KGMJR Aug 16, 2011 The above did not emulate
# either a middle button to paste, or a scroll
# wheel.
# Here comes gsimmons suggestion...
# Identifier "Trackman Marble"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
# That did not paste text or scroll either.
# The following was culled from various examples
# on the net. X would not run unless I commented
# all three lines beginning with "Match". Pasting
# and scrolling did not work.
# Identifier "Trackman Marble"
## MatchProduct "Logitech USB Trackball"
## MatchIsPointer "on"
## MatchDevicePath "/dev/input/event*"
# Driver "evdev"
# Option "ButtonMapping" "1 8 3 4 5 6 7 2 9"
# Option "EmulateWheel" "true"
# Option "EmulateWheelButton" "8"
# Option "ZAxisMapping" "4 5"
# Option "XAxisMapping" "6 7"
## Option "Emulate3Buttons" "false"
# Option "Emulate3Buttons" "true"
# Aug 17, 2011 KGMJR That did not emulate a middle
# button or scroll wheel either, so I commented it
# out, created a directory named
# /etc/X11/xorg.conf.d and copied
# 50-marblemouse.conf from the web into it. I also
# commented 'Section "InputDevice"' and
# 'EndSection'.
#EndSection
Section "Monitor"
Identifier "Samsung SyncMaster 213T"
HorizSync 30.0 - 75.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
# Aug 13, 2011 KGMJR Replaced obsolete "nv" with "nouveau",
# but it didn't work, so then I tried "vesa"
# and "svga". "svga failed, "vesa" does not support 1600x1200
# resolution.
#
# Aug 14, 2011 KGMJR, back to nvida.
# Driver "nv"
# Driver "nouveau"
# Driver "vesa"
# Driver "svga"
#Option "UseFBDev" "true"
Identifier "VisionTek GEForce3 model G72 [7300 SE/7200 GS]"
# Dec 13, 2013 debug kdenlive crash with
# nouveau
# Driver "nvidia"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "VisionTek GEForce3 model G72 [7300 SE/7200 GS]"
Monitor "Samsung SyncMaster 213T"
DefaultDepth 24
Option "UseFBDev" "false"
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 608 Jan 15 22:29 50-marblemouse.conf
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 4.0.0-1-686-pae (debian-ker...@lists.debian.org) (gcc version
4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root adm 19149 Aug 17 2011 /var/log/Xorg.2.log
-rw-r--r-- 1 root adm 27169 Feb 2 00:51 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 32162 May 26 23:56 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 108.653]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 108.653] X Protocol Version 11, Revision 0
[ 108.653] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 108.653] Current Operating System: Linux debian1 4.0.0-1-686-pae #1 SMP
Debian 4.0.2-1 (2015-05-11) i686
[ 108.653] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-686-pae
root=UUID=a9792df8-2513-4185-bb81-589f5f9d508d ro quiet
[ 108.653] Build Date: 04 May 2015 10:46:42PM
[ 108.653] xorg-server 2:1.17.1-2 (http://www.debian.org/support)
[ 108.653] Current version of pixman: 0.32.6
[ 108.653] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 108.653] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 108.653] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 26 23:56:15
2015
[ 108.683] (==) Using config file: "/etc/X11/xorg.conf"
[ 108.683] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 108.683] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 108.711] (==) ServerLayout "Default Layout"
[ 108.711] (**) |-->Screen "Default Screen" (0)
[ 108.711] (**) | |-->Monitor "Samsung SyncMaster 213T"
[ 108.712] (**) | |-->Device "VisionTek GEForce3 model G72 [7300 SE/7200
GS]"
[ 108.712] (**) |-->Input Device "Generic Keyboard"
[ 108.712] (==) Automatically adding devices
[ 108.712] (==) Automatically enabling devices
[ 108.712] (==) Automatically adding GPU devices
[ 108.827] (WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi/".
[ 108.827] Entry deleted from font path.
[ 108.827] (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
[ 108.865] (WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/75dpi/".
[ 108.865] Entry deleted from font path.
[ 108.865] (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/").
[ 108.873] (WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi".
[ 108.874] Entry deleted from font path.
[ 108.874] (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
[ 108.874] (WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/75dpi".
[ 108.874] Entry deleted from font path.
[ 108.874] (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi").
[ 108.874] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/X11R6/lib/X11/fonts/misc,
/usr/share/fonts/X11/cyrillic,
/usr/X11R6/lib/X11/fonts/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/X11R6/lib/X11/fonts/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 108.874] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 108.874] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 108.874] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.
[ 108.874] (WW) Disabling Generic Keyboard
[ 108.874] (II) Loader magic: 0xb7782700
[ 108.874] (II) Module ABI versions:
[ 108.874] X.Org ANSI C Emulation: 0.4
[ 108.874] X.Org Video Driver: 19.0
[ 108.874] X.Org XInput driver : 21.0
[ 108.874] X.Org Server Extension : 9.0
[ 108.874] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 108.875] (--) PCI:*(0:1:0:0) 10de:01d3:3842:c409 rev 161, Mem @
0xfd000000/16777216, 0xc0000000/536870912, 0xfc000000/16777216, BIOS @
0x????????/131072
[ 108.887] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 108.887] (II) LoadModule: "dbe"
[ 108.887] (II) Module "dbe" already built-in
[ 108.887] (II) LoadModule: "ddc"
[ 108.887] (II) Module "ddc" already built-in
[ 108.887] (II) LoadModule: "extmod"
[ 108.887] (II) Module "extmod" already built-in
[ 108.887] (II) LoadModule: "glx"
[ 108.923] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 110.415] (II) Module glx: vendor="X.Org Foundation"
[ 110.415] compiled for 1.17.1, module version = 1.0.0
[ 110.415] ABI class: X.Org Server Extension, version 9.0
[ 110.415] (==) AIGLX enabled
[ 110.415] (II) LoadModule: "int10"
[ 110.415] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 110.425] (II) Module int10: vendor="X.Org Foundation"
[ 110.425] compiled for 1.17.1, module version = 1.0.0
[ 110.425] ABI class: X.Org Video Driver, version 19.0
[ 110.425] (II) LoadModule: "record"
[ 110.425] (II) Module "record" already built-in
[ 110.425] (II) LoadModule: "vbe"
[ 110.425] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 110.427] (II) Module vbe: vendor="X.Org Foundation"
[ 110.427] compiled for 1.17.1, module version = 1.1.0
[ 110.427] ABI class: X.Org Video Driver, version 19.0
[ 110.427] (II) LoadModule: "nouveau"
[ 110.427] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 110.451] (II) Module nouveau: vendor="X.Org Foundation"
[ 110.451] compiled for 1.17.1, module version = 1.0.11
[ 110.451] Module class: X.Org Video Driver
[ 110.451] ABI class: X.Org Video Driver, version 19.0
[ 110.452] (II) NOUVEAU driver Date: Thu Aug 28 03:57:48 2014 +0200
[ 110.452] (II) NOUVEAU driver for NVIDIA chipset families :
[ 110.452] RIVA TNT (NV04)
[ 110.452] RIVA TNT2 (NV05)
[ 110.452] GeForce 256 (NV10)
[ 110.452] GeForce 2 (NV11, NV15)
[ 110.452] GeForce 4MX (NV17, NV18)
[ 110.452] GeForce 3 (NV20)
[ 110.452] GeForce 4Ti (NV25, NV28)
[ 110.452] GeForce FX (NV3x)
[ 110.452] GeForce 6 (NV4x)
[ 110.452] GeForce 7 (G7x)
[ 110.452] GeForce 8 (G8x)
[ 110.452] GeForce GTX 200 (NVA0)
[ 110.452] GeForce GTX 400 (NVC0)
[ 110.452] (++) using VT number 7
[ 110.453] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 110.453] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 110.459] (II) [drm] nouveau interface version: 1.2.1
[ 110.459] (II) Loading sub module "dri2"
[ 110.459] (II) LoadModule: "dri2"
[ 110.459] (II) Module "dri2" already built-in
[ 110.459] (--) NOUVEAU(0): Chipset: "NVIDIA NV46"
[ 110.459] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 110.459] (==) NOUVEAU(0): RGB weight 888
[ 110.459] (==) NOUVEAU(0): Default visual is TrueColor
[ 110.459] (==) NOUVEAU(0): Using HW cursor
[ 110.459] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 110.459] (==) NOUVEAU(0): Page flipping enabled
[ 110.459] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 110.459] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 110.459] (II) NOUVEAU(0): Initializing outputs ...
[ 110.491] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Samsung
SyncMaster 213T
[ 110.548] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 110.604] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 110.604] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 110.604] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 110.604] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 110.636] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 110.636] (II) NOUVEAU(0): Manufacturer: BNQ Model: 78be Serial#: 21573
[ 110.636] (II) NOUVEAU(0): Year: 2013 Week: 24
[ 110.636] (II) NOUVEAU(0): EDID Version: 1.3
[ 110.636] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 110.636] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 110.636] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 110.636] (II) NOUVEAU(0): Gamma: 2.20
[ 110.636] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 110.636] (II) NOUVEAU(0): Default color space is primary color space
[ 110.636] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 110.636] (II) NOUVEAU(0): redX: 0.642 redY: 0.334 greenX: 0.334 greenY:
0.624
[ 110.636] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.050 whiteX: 0.313 whiteY:
0.329
[ 110.636] (II) NOUVEAU(0): Supported established timings:
[ 110.636] (II) NOUVEAU(0): 720x400@70Hz
[ 110.636] (II) NOUVEAU(0): 640x480@60Hz
[ 110.636] (II) NOUVEAU(0): 640x480@75Hz
[ 110.636] (II) NOUVEAU(0): 800x600@60Hz
[ 110.636] (II) NOUVEAU(0): 800x600@75Hz
[ 110.636] (II) NOUVEAU(0): 832x624@75Hz
[ 110.636] (II) NOUVEAU(0): 1024x768@60Hz
[ 110.636] (II) NOUVEAU(0): 1024x768@75Hz
[ 110.636] (II) NOUVEAU(0): 1280x1024@75Hz
[ 110.636] (II) NOUVEAU(0): 1152x864@75Hz
[ 110.636] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 110.636] (II) NOUVEAU(0): Supported standard timings:
[ 110.636] (II) NOUVEAU(0): #0: hsize: 1024 vsize 576 refresh: 60 vid:
49249
[ 110.637] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 110.637] (II) NOUVEAU(0): #2: hsize: 1280 vsize 720 refresh: 60 vid:
49281
[ 110.637] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid:
16513
[ 110.637] (II) NOUVEAU(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 110.637] (II) NOUVEAU(0): #5: hsize: 1600 vsize 900 refresh: 60 vid:
49321
[ 110.637] (II) NOUVEAU(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 110.637] (II) NOUVEAU(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid:
49361
[ 110.637] (II) NOUVEAU(0): Supported detailed timing:
[ 110.637] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 531 x 298 mm
[ 110.637] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052
h_blank_end 2200 h_border: 0
[ 110.637] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089
v_blanking: 1125 v_border: 0
[ 110.637] (II) NOUVEAU(0): Serial No: H6D02195SL0
[ 110.637] (II) NOUVEAU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max:
83 kHz, PixClock max 215 MHz
[ 110.637] (II) NOUVEAU(0): Monitor name: BenQ GW2450
[ 110.637] (II) NOUVEAU(0): EDID (in hex):
[ 110.637] (II) NOUVEAU(0): 00ffffffffffff0009d1be7845540000
[ 110.637] (II) NOUVEAU(0): 181701030e351e782e6b35a455559f27
[ 110.637] (II) NOUVEAU(0): 0c5054a56b8061c0810081c081408180
[ 110.637] (II) NOUVEAU(0): a9c0b300d1c0023a801871382d40582c
[ 110.637] (II) NOUVEAU(0): 4500132a2100001e000000ff00483644
[ 110.637] (II) NOUVEAU(0): 3032313935534c300a20000000fd0032
[ 110.637] (II) NOUVEAU(0): 4c1e5315000a202020202020000000fc
[ 110.637] (II) NOUVEAU(0): 0042656e51204757323435300a200013
[ 110.637] (II) NOUVEAU(0): Not using mode "1280x1024" (hsync out of range)
[ 110.637] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 110.637] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052
2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 110.637] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864
2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 110.637] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480
1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472
1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 110.637] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168
1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 110.637] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 110.637] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 110.692] (II) NOUVEAU(0): EDID for output VGA-1
[ 110.748] (II) NOUVEAU(0): EDID for output TV-1
[ 110.748] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 110.748] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 110.748] (II) NOUVEAU(0): Output TV-1 disconnected
[ 110.748] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 110.748] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 110.748] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 110.748] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 110.748] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from
0.0 MHz), 67.5 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052
2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 110.748] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from
0.0 MHz), 65.3 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 110.748] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0
MHz), 55.9 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864
2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 110.748] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from
0.0 MHz), 64.0 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from
0.0 MHz), 60.0 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from
0.0 MHz), 49.7 kHz, 59.8 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480
1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from
0.0 MHz), 67.5 kHz, 75.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 110.748] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz),
44.7 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472
1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 110.748] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from
0.0 MHz), 60.1 kHz, 75.1 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from
0.0 MHz), 48.4 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 110.748] (**) NOUVEAU(0): Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz),
35.8 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168
1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 110.748] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0
MHz), 49.7 kHz, 74.6 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0
MHz), 46.9 kHz, 75.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0
MHz), 37.9 kHz, 60.3 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0
MHz), 37.5 kHz, 75.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0
MHz), 31.5 kHz, 60.0 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 110.748] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0
MHz), 31.5 kHz, 70.1 Hz
[ 110.748] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 110.748] (==) NOUVEAU(0): DPI set to (96, 96)
[ 110.748] (II) Loading sub module "fb"
[ 110.748] (II) LoadModule: "fb"
[ 110.748] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 110.768] (II) Module fb: vendor="X.Org Foundation"
[ 110.768] compiled for 1.17.1, module version = 1.0.0
[ 110.768] ABI class: X.Org ANSI C Emulation, version 0.4
[ 110.768] (II) Loading sub module "shadowfb"
[ 110.768] (II) LoadModule: "shadowfb"
[ 110.768] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 110.769] (II) Module shadowfb: vendor="X.Org Foundation"
[ 110.769] compiled for 1.17.1, module version = 1.0.0
[ 110.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 110.769] (--) Depth 24 pixmap format is 32 bpp
[ 110.773] (II) NOUVEAU(0): Channel setup complete.
[ 110.781] (II) NOUVEAU(0): [DRI2] Setup complete
[ 110.781] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 110.781] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 110.792] (II) Loading sub module "exa"
[ 110.792] (II) LoadModule: "exa"
[ 110.792] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 110.794] (II) Module exa: vendor="X.Org Foundation"
[ 110.794] compiled for 1.17.1, module version = 2.6.0
[ 110.794] ABI class: X.Org Video Driver, version 19.0
[ 110.794] (II) EXA(0): Driver allocated offscreen pixmaps
[ 110.794] (II) EXA(0): Driver registered support for the following
operations:
[ 110.794] (II) Solid
[ 110.794] (II) Copy
[ 110.794] (II) Composite (RENDER acceleration)
[ 110.794] (II) UploadToScreen
[ 110.794] (II) DownloadFromScreen
[ 110.794] (==) NOUVEAU(0): Backing store enabled
[ 110.794] (==) NOUVEAU(0): Silken mouse enabled
[ 110.795] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 110.795] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 110.795] (**) NOUVEAU(0): DPMS enabled
[ 110.795] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 110.796] (WW) NOUVEAU(0): Option "UseFBDev" is not used
[ 110.796] (--) RandR disabled
[ 110.804] (II) SELinux: Disabled on system
[ 111.849] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 111.849] (II) AIGLX: enabled GLX_ARB_create_context
[ 111.849] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 111.849] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 111.849] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 111.849] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 111.849] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 111.849] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 111.849] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 111.850] (II) AIGLX: Loaded and initialized nouveau
[ 111.850] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 111.867] (II) NOUVEAU(0): NVEnterVT is called.
[ 111.867] (II) NOUVEAU(0): Setting screen physical size to 507 x 285
[ 111.867] resize called 1920 1080
[ 113.066] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 113.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 113.066] (II) LoadModule: "evdev"
[ 113.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 113.126] (II) Module evdev: vendor="X.Org Foundation"
[ 113.126] compiled for 1.16.4, module version = 2.9.2
[ 113.126] Module class: X.Org XInput Driver
[ 113.126] ABI class: X.Org XInput driver, version 21.0
[ 113.126] (II) Using input driver 'evdev' for 'Power Button'
[ 113.126] (**) Power Button: always reports core events
[ 113.126] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 113.126] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 113.126] (--) evdev: Power Button: Found keys
[ 113.126] (II) evdev: Power Button: Configuring as keyboard
[ 113.126] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 113.126] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 113.126] (**) Option "xkb_rules" "evdev"
[ 113.126] (**) Option "xkb_model" "pc104"
[ 113.126] (**) Option "xkb_layout" "us"
[ 113.126] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 113.183] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 113.183] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 113.183] (II) Using input driver 'evdev' for 'Power Button'
[ 113.183] (**) Power Button: always reports core events
[ 113.183] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 113.183] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 113.183] (--) evdev: Power Button: Found keys
[ 113.183] (II) evdev: Power Button: Configuring as keyboard
[ 113.183] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 113.183] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 7)
[ 113.183] (**) Option "xkb_rules" "evdev"
[ 113.183] (**) Option "xkb_model" "pc104"
[ 113.183] (**) Option "xkb_layout" "us"
[ 113.183] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 113.184] (II) config/udev: Adding input device Logitech USB Trackball
(/dev/input/event1)
[ 113.184] (**) Logitech USB Trackball: Applying InputClass "evdev pointer
catchall"
[ 113.184] (**) Logitech USB Trackball: Applying InputClass "Marble Mouse"
[ 113.184] (II) Using input driver 'evdev' for 'Logitech USB Trackball'
[ 113.184] (**) Option "SendCoreEvents" "true"
[ 113.184] (**) Logitech USB Trackball: always reports core events
[ 113.184] (**) evdev: Logitech USB Trackball: Device: "/dev/input/event1"
[ 113.240] (**) evdev: Logitech USB Trackball: ButtonMapping '1 8 3 4 5 6 7 2
9'
[ 113.240] (--) evdev: Logitech USB Trackball: Vendor 0x46d Product 0xc408
[ 113.240] (--) evdev: Logitech USB Trackball: Found 9 mouse buttons
[ 113.240] (--) evdev: Logitech USB Trackball: Found relative axes
[ 113.240] (--) evdev: Logitech USB Trackball: Found x and y relative axes
[ 113.240] (II) evdev: Logitech USB Trackball: Configuring as mouse
[ 113.240] (**) Option "EmulateWheel" "true"
[ 113.240] (**) Option "EmulateWheelButton" "8"
[ 113.240] (**) Option "YAxisMapping" "4 5"
[ 113.240] (**) evdev: Logitech USB Trackball: YAxisMapping: buttons 4 and 5
[ 113.240] (**) Option "XAxisMapping" "6 7"
[ 113.240] (**) evdev: Logitech USB Trackball: XAxisMapping: buttons 6 and 7
[ 113.240] (**) evdev: Logitech USB Trackball: EmulateWheelButton: 8,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 113.240] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1/event1"
[ 113.240] (II) XINPUT: Adding extended input device "Logitech USB Trackball"
(type: MOUSE, id 8)
[ 113.240] (II) evdev: Logitech USB Trackball: initialized for relative axes.
[ 113.240] (**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
[ 113.240] (**) Logitech USB Trackball: (accel) acceleration profile 0
[ 113.240] (**) Logitech USB Trackball: (accel) acceleration factor: 2.000
[ 113.240] (**) Logitech USB Trackball: (accel) acceleration threshold: 4
[ 113.240] (II) config/udev: Adding input device Logitech USB Trackball
(/dev/input/mouse0)
[ 113.240] (**) Logitech USB Trackball: Applying InputClass "Marble Mouse"
[ 113.240] (II) Using input driver 'evdev' for 'Logitech USB Trackball'
[ 113.240] (**) Option "SendCoreEvents" "true"
[ 113.240] (**) Logitech USB Trackball: always reports core events
[ 113.240] (**) evdev: Logitech USB Trackball: Device: "/dev/input/mouse0"
[ 113.241] (EE) evdev: Logitech USB Trackball: Unable to query fd:
Inappropriate ioctl for device
[ 113.288] (EE) PreInit returned 2 for "Logitech USB Trackball"
[ 113.288] (II) UnloadModule: "evdev"
[ 113.288] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 113.288] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 113.288] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 113.288] (**) AT Translated Set 2 keyboard: always reports core events
[ 113.288] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 113.288] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 113.288] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 113.288] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 113.288] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 113.288] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 9)
[ 113.288] (**) Option "xkb_rules" "evdev"
[ 113.288] (**) Option "xkb_model" "pc104"
[ 113.288] (**) Option "xkb_layout" "us"
[ 113.288] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 113.289] (II) config/udev: Adding input device PC Speaker
(/dev/input/event4)
[ 113.289] (II) No input driver specified, ignoring this device.
[ 113.289] (II) This device may have been added with another device file.
[ 135.133] (II) NOUVEAU(0): EDID vendor "BNQ", prod id 30910
[ 135.133] (II) NOUVEAU(0): Using hsync ranges from config file
[ 135.133] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 135.133] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 135.133] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052
2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 135.133] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.99 1024 1064 1168
1312 576 577 580 597 -hsync +vsync (35.8 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472
1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864
2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 135.133] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 135.302] (II) NOUVEAU(0): EDID vendor "BNQ", prod id 30910
[ 135.302] (II) NOUVEAU(0): Using hsync ranges from config file
[ 135.302] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 135.303] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 135.303] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052
2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 135.303] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.99 1024 1064 1168
1312 576 577 580 597 -hsync +vsync (35.8 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472
1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864
2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 135.303] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=955852
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=795618
E: XKBLAYOUT=us
E: XKBMODEL=pc104
E: XKBOPTIONS=terminate:ctrl_alt_bksp
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=954235
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=795521
E: XKBLAYOUT=us
E: XKBMODEL=pc104
E: XKBOPTIONS=terminate:ctrl_alt_bksp
P:
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1
E:
DEVPATH=/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_13_1-usb-0_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Trackball
E: ID_MODEL_ENC=USB\x20Trackball
E: ID_MODEL_ID=c408
E: ID_PATH=pci-0000:00:13.1-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_13_1-usb-0_2_1_0
E: ID_REVISION=1400
E: ID_SERIAL=Logitech_USB_Trackball
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=1f0000 0 0 0 0 0 0 0 0
E:
MODALIAS=input:b0003v046DpC408e0110-e0,1,2,4,k110,111,112,113,114,r0,1,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Trackball"
E: PHYS="usb-0000:00:13.1-2/input0"
E: PRODUCT=3/46d/c408/110
E: PROP=0
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=67801
P:
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Trackball-event-mouse
S: input/by-path/pci-0000:00:13.1-usb-0:2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Trackball-event-mouse
/dev/input/by-path/pci-0000:00:13.1-usb-0:2:1.0-event-mouse
E: DEVNAME=/dev/input/event1
E:
DEVPATH=/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Trackball
E: ID_MODEL_ENC=USB\x20Trackball
E: ID_MODEL_ID=c408
E: ID_PATH=pci-0000:00:13.1-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_13_1-usb-0_2_1_0
E: ID_REVISION=1400
E: ID_SERIAL=Logitech_USB_Trackball
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=795421
P:
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Trackball-mouse
S: input/by-path/pci-0000:00:13.1-usb-0:2:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Trackball-mouse
/dev/input/by-path/pci-0000:00:13.1-usb-0:2:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E:
DEVPATH=/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Trackball
E: ID_MODEL_ENC=USB\x20Trackball
E: ID_MODEL_ID=c408
E: ID_PATH=pci-0000:00:13.1-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_13_1-usb-0_2_1_0
E: ID_REVISION=1400
E: ID_SERIAL=Logitech_USB_Trackball
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=67858
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
E: LED=7
E:
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1400936
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=795314
E: XKBLAYOUT=us
E: XKBMODEL=pc104
E: XKBOPTIONS=terminate:ctrl_alt_bksp
P: /devices/platform/pcspkr/input/input4
E: DEVPATH=/devices/platform/pcspkr/input/input4
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=686452
P: /devices/platform/pcspkr/input/input4/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/pcspkr/input/input4/event4
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=796057
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (990, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 4.0.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.19-18
ii libdrm-nouveau2 2.4.60-3
ii libdrm2 2.4.60-3
ii libudev1 215-18
ii xserver-xorg-core [xorg-video-abi-19] 2:1.17.1-2
Versions of packages xserver-xorg-video-nouveau recommends:
ii libgl1-mesa-dri 10.5.5-1
xserver-xorg-video-nouveau suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/20150530065620.26744.17814.report...@debian1.loaner.com
