Package: xorg Followup-For: Bug #674929 Dear Maintainer,
I have artifacts in font. In any programm. Using latest GNOME and latest XORG (from packages). It was on openbox (latest) -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Apr 27 23:23 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2564976 Feb 11 03:23 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) /etc/X11/xorg.conf does not exist. /etc/X11/xorg.conf.d does not exist. /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 3.16.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 26239 Apr 30 22:22 /var/log/Xorg.1.log -rw-r--r-- 1 root root 35071 May 1 23:22 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 1958.236] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 1958.238] X Protocol Version 11, Revision 0 [ 1958.238] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian [ 1958.238] Current Operating System: Linux notebook 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) i686 [ 1958.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=d3592994-31bf-4363-a750-888e4815037b ro quiet splash [ 1958.239] Build Date: 11 February 2015 01:14:26AM [ 1958.239] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 1958.239] Current version of pixman: 0.32.6 [ 1958.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1958.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1958.239] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 1 22:31:14 2015 [ 1958.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 1958.445] (==) No Layout section. Using the first Screen section. [ 1958.445] (==) No screen section available. Using defaults. [ 1958.448] (**) |-->Screen "Default Screen Section" (0) [ 1958.448] (**) | |-->Monitor "<default monitor>" [ 1958.448] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 1958.448] (==) Automatically adding devices [ 1958.448] (==) Automatically enabling devices [ 1958.448] (==) Automatically adding GPU devices [ 1958.518] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 1958.518] Entry deleted from font path. [ 1958.675] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 1958.717] (==) ModulePath set to "/usr/lib/xorg/modules" [ 1958.717] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 1958.717] (II) Loader magic: 0xb779f700 [ 1958.717] (II) Module ABI versions: [ 1958.717] X.Org ANSI C Emulation: 0.4 [ 1958.717] X.Org Video Driver: 18.0 [ 1958.718] X.Org XInput driver : 21.0 [ 1958.718] X.Org Server Extension : 8.0 [ 1958.727] (II) xfree86: Adding drm device (/dev/dri/card0) [ 1958.730] (--) PCI:*(0:0:2:0) 8086:27a2:1854:0105 rev 3, Mem @ 0xf8100000/524288, 0xd0000000/268435456, 0xf8200000/262144, I/O @ 0x00001800/8 [ 1958.730] (--) PCI: (0:0:2:1) 8086:27a6:1854:0105 rev 3, Mem @ 0xf8180000/524288 [ 1958.730] (II) LoadModule: "glx" [ 1958.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 1958.937] (II) Module glx: vendor="X.Org Foundation" [ 1958.937] compiled for 1.16.4, module version = 1.0.0 [ 1958.937] ABI class: X.Org Server Extension, version 8.0 [ 1958.937] (==) AIGLX enabled [ 1958.937] (==) Matched intel as autoconfigured driver 0 [ 1958.937] (==) Matched intel as autoconfigured driver 1 [ 1958.937] (==) Matched modesetting as autoconfigured driver 2 [ 1958.937] (==) Matched fbdev as autoconfigured driver 3 [ 1958.937] (==) Matched vesa as autoconfigured driver 4 [ 1958.937] (==) Assigned the driver to the xf86ConfigLayout [ 1958.937] (II) LoadModule: "intel" [ 1958.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 1958.999] (II) Module intel: vendor="X.Org Foundation" [ 1958.999] compiled for 1.15.99.904, module version = 2.21.15 [ 1958.999] Module class: X.Org Video Driver [ 1958.999] ABI class: X.Org Video Driver, version 18.0 [ 1958.999] (II) LoadModule: "modesetting" [ 1958.999] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 1959.018] (II) Module modesetting: vendor="X.Org Foundation" [ 1959.018] compiled for 1.15.99.904, module version = 0.9.0 [ 1959.018] Module class: X.Org Video Driver [ 1959.018] ABI class: X.Org Video Driver, version 18.0 [ 1959.018] (II) LoadModule: "fbdev" [ 1959.019] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 1959.028] (II) Module fbdev: vendor="X.Org Foundation" [ 1959.028] compiled for 1.15.99.904, module version = 0.4.4 [ 1959.028] Module class: X.Org Video Driver [ 1959.028] ABI class: X.Org Video Driver, version 18.0 [ 1959.028] (II) LoadModule: "vesa" [ 1959.028] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 1959.058] (II) Module vesa: vendor="X.Org Foundation" [ 1959.058] compiled for 1.15.99.904, module version = 2.3.3 [ 1959.058] Module class: X.Org Video Driver [ 1959.058] ABI class: X.Org Video Driver, version 18.0 [ 1959.058] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 1959.059] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 1959.060] (II) FBDEV: driver for framebuffer: fbdev [ 1959.060] (II) VESA: driver for VESA chipsets: vesa [ 1959.060] (++) using VT number 7 [ 1959.060] (WW) Falling back to old probe method for modesetting [ 1959.060] (WW) Falling back to old probe method for fbdev [ 1959.060] (II) Loading sub module "fbdevhw" [ 1959.060] (II) LoadModule: "fbdevhw" [ 1959.060] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 1959.075] (II) Module fbdevhw: vendor="X.Org Foundation" [ 1959.075] compiled for 1.16.4, module version = 0.0.2 [ 1959.075] ABI class: X.Org Video Driver, version 18.0 [ 1959.075] (WW) Falling back to old probe method for vesa [ 1959.075] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 1959.075] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1959.075] (==) intel(0): RGB weight 888 [ 1959.075] (==) intel(0): Default visual is TrueColor [ 1959.075] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM [ 1959.076] (**) intel(0): Relaxed fencing disabled [ 1959.076] (**) intel(0): Wait on SwapBuffers? enabled [ 1959.076] (**) intel(0): Triple buffering? enabled [ 1959.076] (**) intel(0): Framebuffer tiled [ 1959.076] (**) intel(0): Pixmaps tiled [ 1959.076] (**) intel(0): 3D buffers tiled [ 1959.076] (**) intel(0): SwapBuffers wait enabled [ 1959.076] (==) intel(0): video overlay key set to 0x101fe [ 1959.076] (II) intel(0): Output LVDS1 has no monitor section [ 1959.077] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 1959.116] (II) intel(0): Output VGA1 has no monitor section [ 1959.349] (II) intel(0): Output TV1 has no monitor section [ 1959.349] (II) intel(0): EDID for output LVDS1 [ 1959.349] (II) intel(0): Manufacturer: LPL Model: e800 Serial#: 0 [ 1959.349] (II) intel(0): Year: 2007 Week: 0 [ 1959.349] (II) intel(0): EDID Version: 1.1 [ 1959.349] (II) intel(0): Digital Display Input [ 1959.349] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19 [ 1959.349] (II) intel(0): Gamma: 2.20 [ 1959.350] (II) intel(0): No DPMS capabilities specified [ 1959.350] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 1959.350] (II) intel(0): First detailed timing is preferred mode [ 1959.350] (II) intel(0): redX: 0.584 redY: 0.347 greenX: 0.323 greenY: 0.542 [ 1959.350] (II) intel(0): blueX: 0.157 blueY: 0.145 whiteX: 0.312 whiteY: 0.328 [ 1959.350] (II) intel(0): Manufacturer's mask: 0 [ 1959.350] (II) intel(0): Supported detailed timing: [ 1959.350] (II) intel(0): clock: 71.0 MHz Image Size: 304 x 190 mm [ 1959.350] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 [ 1959.350] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 [ 1959.350] (II) intel(0): LGPhilipsLCD [ 1959.350] (II) intel(0): LP141WX3-TLB1 [ 1959.350] (II) intel(0): EDID (in hex): [ 1959.350] (II) intel(0): 00ffffffffffff00320c00e800000000 [ 1959.350] (II) intel(0): 00110101801e13780abf409558528a28 [ 1959.350] (II) intel(0): 25505400000001010101010101010101 [ 1959.350] (II) intel(0): 010101010101bc1b00a0502017303020 [ 1959.350] (II) intel(0): 360030be100000180000000000000000 [ 1959.350] (II) intel(0): 00000000000000000000000000fe004c [ 1959.350] (II) intel(0): 475068696c6970734c43440a000000fe [ 1959.350] (II) intel(0): 004c503134315758332d544c4231006e [ 1959.350] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 1959.350] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 1959.350] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 1959.350] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 1959.350] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 1959.351] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 1959.351] (II) intel(0): Printing probed modes for output LVDS1 [ 1959.351] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 1959.351] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 1959.351] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 1959.351] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 1959.351] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 1959.393] (II) intel(0): EDID for output VGA1 [ 1959.627] (II) intel(0): EDID for output TV1 [ 1959.627] (II) intel(0): Output LVDS1 connected [ 1959.628] (II) intel(0): Output VGA1 disconnected [ 1959.629] (II) intel(0): Output TV1 disconnected [ 1959.629] (II) intel(0): Using exact sizes for initial modes [ 1959.629] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 1959.629] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1959.629] (II) intel(0): Kernel page flipping support detected, enabling [ 1959.629] (==) intel(0): DPI set to (96, 96) [ 1959.629] (II) Loading sub module "fb" [ 1959.629] (II) LoadModule: "fb" [ 1959.630] (II) Loading /usr/lib/xorg/modules/libfb.so [ 1959.659] (II) Module fb: vendor="X.Org Foundation" [ 1959.659] compiled for 1.16.4, module version = 1.0.0 [ 1959.659] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1959.659] (II) Loading sub module "dri2" [ 1959.659] (II) LoadModule: "dri2" [ 1959.659] (II) Module "dri2" already built-in [ 1959.659] (II) UnloadModule: "modesetting" [ 1959.659] (II) Unloading modesetting [ 1959.659] (II) UnloadModule: "fbdev" [ 1959.659] (II) Unloading fbdev [ 1959.659] (II) UnloadSubModule: "fbdevhw" [ 1959.659] (II) Unloading fbdevhw [ 1959.659] (II) UnloadModule: "vesa" [ 1959.659] (II) Unloading vesa [ 1959.661] (==) Depth 24 pixmap format is 32 bpp [ 1959.661] (II) intel(0): [DRI2] Setup complete [ 1959.661] (II) intel(0): [DRI2] DRI driver: i915 [ 1959.661] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [ 1959.661] (II) UXA(0): Driver registered support for the following operations: [ 1959.661] (II) solid [ 1959.661] (II) copy [ 1959.661] (II) composite (RENDER acceleration) [ 1959.661] (II) put_image [ 1959.661] (II) get_image [ 1959.661] (==) intel(0): Backing store enabled [ 1959.661] (==) intel(0): Silken mouse enabled [ 1959.662] (II) intel(0): Initializing HW Cursor [ 1959.662] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 1959.672] (==) intel(0): DPMS enabled [ 1959.673] (==) intel(0): Intel XvMC decoder disabled [ 1959.673] (II) intel(0): Set up textured video [ 1959.673] (II) intel(0): Set up overlay video [ 1959.673] (II) intel(0): direct rendering: DRI2 Enabled [ 1959.673] (==) intel(0): hotplug detection: "enabled" [ 1959.708] (--) RandR disabled [ 1959.772] (II) SELinux: Disabled on system [ 1959.781] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 1959.782] (II) AIGLX: enabled GLX_ARB_create_context [ 1959.782] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 1959.783] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 1959.783] (II) AIGLX: enabled GLX_INTEL_swap_event [ 1959.783] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 1959.783] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 1959.783] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 1959.783] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 1959.783] (II) AIGLX: Loaded and initialized i915 [ 1959.783] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 1959.785] (II) intel(0): Setting screen physical size to 338 x 211 [ 1960.055] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 1960.056] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1960.056] (II) LoadModule: "evdev" [ 1960.056] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 1960.057] (II) Module evdev: vendor="X.Org Foundation" [ 1960.057] compiled for 1.16.0, module version = 2.9.0 [ 1960.057] Module class: X.Org XInput Driver [ 1960.057] ABI class: X.Org XInput driver, version 21.0 [ 1960.057] (II) Using input driver 'evdev' for 'Power Button' [ 1960.057] (**) Power Button: always reports core events [ 1960.057] (**) evdev: Power Button: Device: "/dev/input/event4" [ 1960.057] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1960.058] (--) evdev: Power Button: Found keys [ 1960.058] (II) evdev: Power Button: Configuring as keyboard [ 1960.058] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4" [ 1960.058] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 1960.058] (**) Option "xkb_rules" "evdev" [ 1960.058] (**) Option "xkb_model" "pc105" [ 1960.058] (**) Option "xkb_layout" "us,ru" [ 1960.058] (**) Option "xkb_variant" "," [ 1960.058] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll" [ 1960.132] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 1960.132] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 1960.133] (II) Using input driver 'evdev' for 'Video Bus' [ 1960.133] (**) Video Bus: always reports core events [ 1960.133] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 1960.133] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 1960.133] (--) evdev: Video Bus: Found keys [ 1960.134] (II) evdev: Video Bus: Configuring as keyboard [ 1960.134] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event5" [ 1960.134] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 1960.134] (**) Option "xkb_rules" "evdev" [ 1960.134] (**) Option "xkb_model" "pc105" [ 1960.134] (**) Option "xkb_layout" "us,ru" [ 1960.134] (**) Option "xkb_variant" "," [ 1960.134] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll" [ 1960.139] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 1960.139] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1960.139] (II) Using input driver 'evdev' for 'Power Button' [ 1960.139] (**) Power Button: always reports core events [ 1960.139] (**) evdev: Power Button: Device: "/dev/input/event2" [ 1960.139] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1960.139] (--) evdev: Power Button: Found keys [ 1960.139] (II) evdev: Power Button: Configuring as keyboard [ 1960.139] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2" [ 1960.139] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 1960.139] (**) Option "xkb_rules" "evdev" [ 1960.139] (**) Option "xkb_model" "pc105" [ 1960.139] (**) Option "xkb_layout" "us,ru" [ 1960.139] (**) Option "xkb_variant" "," [ 1960.139] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll" [ 1960.143] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 1960.143] (II) No input driver specified, ignoring this device. [ 1960.143] (II) This device may have been added with another device file. [ 1960.145] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 1960.146] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 1960.146] (II) Using input driver 'evdev' for 'Sleep Button' [ 1960.146] (**) Sleep Button: always reports core events [ 1960.146] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 1960.146] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 1960.146] (--) evdev: Sleep Button: Found keys [ 1960.146] (II) evdev: Sleep Button: Configuring as keyboard [ 1960.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3" [ 1960.146] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 1960.146] (**) Option "xkb_rules" "evdev" [ 1960.146] (**) Option "xkb_model" "pc105" [ 1960.146] (**) Option "xkb_layout" "us,ru" [ 1960.146] (**) Option "xkb_variant" "," [ 1960.146] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll" [ 1960.188] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8) [ 1960.188] (II) No input driver specified, ignoring this device. [ 1960.188] (II) This device may have been added with another device file. [ 1960.190] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9) [ 1960.190] (II) No input driver specified, ignoring this device. [ 1960.190] (II) This device may have been added with another device file. [ 1960.191] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 1960.191] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 1960.191] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 1960.191] (**) AT Translated Set 2 keyboard: always reports core events [ 1960.191] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 1960.191] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 1960.192] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 1960.192] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 1960.192] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 1960.192] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 1960.192] (**) Option "xkb_rules" "evdev" [ 1960.192] (**) Option "xkb_model" "pc105" [ 1960.192] (**) Option "xkb_layout" "us,ru" [ 1960.192] (**) Option "xkb_variant" "," [ 1960.192] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll" [ 1960.194] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 1960.194] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 1960.194] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad" [ 1960.194] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 1960.194] (II) LoadModule: "synaptics" [ 1960.194] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 1960.194] (II) Module synaptics: vendor="X.Org Foundation" [ 1960.194] compiled for 1.16.0.901, module version = 1.8.99 [ 1960.194] Module class: X.Org XInput Driver [ 1960.194] ABI class: X.Org XInput driver, version 21.0 [ 1960.194] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 1960.195] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 1960.195] (**) Option "Device" "/dev/input/event6" [ 1960.195] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 69) [ 1960.195] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 117) [ 1960.195] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 1960.195] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 1960.195] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 1960.195] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 1960.195] (**) Option "VertEdgeScroll" "1" [ 1960.195] (**) Option "CornerCoasting" "1" [ 1960.195] (**) Option "VertTwoFingerScroll" "1" [ 1960.195] (**) Option "HorizTwoFingerScroll" "1" [ 1960.195] (**) Option "RBCornerButton" "9" [ 1960.195] (**) Option "LBCornerButton" "8" [ 1960.195] (**) Option "TapButton1" "1" [ 1960.195] (**) Option "TapButton2" "2" [ 1960.195] (**) Option "TapButton3" "3" [ 1960.198] (**) Option "CircularScrolling" "1" [ 1960.198] (**) Option "CircScrollTrigger" "7" [ 1960.198] (**) Option "MinSpeed" "0.5" [ 1960.198] (**) Option "MaxSpeed" "1.0" [ 1960.198] (**) Option "AccelFactor" "0.075" [ 1960.198] (**) Option "CoastingSpeed" "8" [ 1960.199] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 1960.199] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 1960.199] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input11/event6" [ 1960.199] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 1960.199] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0 [ 1960.199] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00 [ 1960.199] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075 [ 1960.199] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 1960.199] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 1960.199] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 1960.199] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 1960.199] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 1960.203] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 1960.203] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 1960.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event7) [ 1960.205] (II) No input driver specified, ignoring this device. [ 1960.205] (II) This device may have been added with another device file. [ 1962.755] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 1962.755] (II) intel(0): Printing DDC gathered Modelines: [ 1962.755] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 1965.785] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 1965.786] (II) intel(0): Printing DDC gathered Modelines: [ 1965.786] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 1992.083] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 1992.083] (II) intel(0): Printing DDC gathered Modelines: [ 1992.083] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 1997.789] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 1997.789] (II) intel(0): Printing DDC gathered Modelines: [ 1997.789] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 2169.921] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 2169.921] (II) intel(0): Printing DDC gathered Modelines: [ 2169.921] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4026.534] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event10) [ 4026.703] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 4026.721] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 4026.842] (**) USB Optical Mouse: always reports core events [ 4026.867] (**) evdev: USB Optical Mouse: Device: "/dev/input/event10" [ 4027.399] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7 [ 4027.399] (--) evdev: USB Optical Mouse: Found 3 mouse buttons [ 4027.399] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 4027.399] (--) evdev: USB Optical Mouse: Found relative axes [ 4027.399] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 4027.399] (--) evdev: USB Optical Mouse: Found absolute axes [ 4027.399] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist. [ 4027.400] (II) evdev: USB Optical Mouse: Configuring as mouse [ 4027.400] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 4027.400] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 4027.400] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4027.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:1BCF:0007.0001/input/input23/event10" [ 4027.433] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 12) [ 4027.433] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 4027.433] (WW) evdev: USB Optical Mouse: ignoring absolute axes. [ 4027.434] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 4027.434] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 4027.434] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 4027.434] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 4027.435] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 4027.435] (II) No input driver specified, ignoring this device. [ 4027.435] (II) This device may have been added with another device file. [ 4037.128] (II) config/udev: removing device USB Optical Mouse [ 4037.129] (II) evdev: USB Optical Mouse: Close [ 4037.129] (II) UnloadModule: "evdev" [ 4037.629] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event10) [ 4037.629] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 4037.629] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 4037.629] (**) USB Optical Mouse: always reports core events [ 4037.629] (**) evdev: USB Optical Mouse: Device: "/dev/input/event10" [ 4037.629] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7 [ 4037.629] (--) evdev: USB Optical Mouse: Found 3 mouse buttons [ 4037.629] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 4037.629] (--) evdev: USB Optical Mouse: Found relative axes [ 4037.629] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 4037.629] (--) evdev: USB Optical Mouse: Found absolute axes [ 4037.629] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist. [ 4037.629] (II) evdev: USB Optical Mouse: Configuring as mouse [ 4037.629] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 4037.629] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 4037.629] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4037.630] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:1BCF:0007.0002/input/input24/event10" [ 4037.630] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 12) [ 4037.632] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 4037.632] (WW) evdev: USB Optical Mouse: ignoring absolute axes. [ 4037.639] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 4037.639] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 4037.639] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 4037.639] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 4037.651] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 4037.651] (II) No input driver specified, ignoring this device. [ 4037.651] (II) This device may have been added with another device file. [ 4051.819] (II) config/udev: removing device USB Optical Mouse [ 4051.820] (II) evdev: USB Optical Mouse: Close [ 4051.820] (II) UnloadModule: "evdev" [ 4052.311] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event10) [ 4052.311] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 4052.311] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 4052.311] (**) USB Optical Mouse: always reports core events [ 4052.311] (**) evdev: USB Optical Mouse: Device: "/dev/input/event10" [ 4052.311] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7 [ 4052.311] (--) evdev: USB Optical Mouse: Found 3 mouse buttons [ 4052.311] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 4052.311] (--) evdev: USB Optical Mouse: Found relative axes [ 4052.311] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 4052.311] (--) evdev: USB Optical Mouse: Found absolute axes [ 4052.311] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist. [ 4052.311] (II) evdev: USB Optical Mouse: Configuring as mouse [ 4052.311] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 4052.311] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 4052.311] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4052.311] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:1BCF:0007.0003/input/input25/event10" [ 4052.311] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 12) [ 4052.312] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 4052.312] (WW) evdev: USB Optical Mouse: ignoring absolute axes. [ 4052.313] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 4052.313] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 4052.313] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 4052.313] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 4052.334] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) [ 4052.336] (II) No input driver specified, ignoring this device. [ 4052.336] (II) This device may have been added with another device file. [ 4065.346] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4065.347] (II) intel(0): Printing DDC gathered Modelines: [ 4065.347] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4107.275] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4107.277] (II) intel(0): Printing DDC gathered Modelines: [ 4107.278] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4107.611] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4107.611] (II) intel(0): Printing DDC gathered Modelines: [ 4107.611] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4107.891] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4107.892] (II) intel(0): Printing DDC gathered Modelines: [ 4107.893] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4108.299] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4108.300] (II) intel(0): Printing DDC gathered Modelines: [ 4108.301] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4108.800] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4108.801] (II) intel(0): Printing DDC gathered Modelines: [ 4108.801] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4109.242] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4109.243] (II) intel(0): Printing DDC gathered Modelines: [ 4109.243] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4109.562] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4109.563] (II) intel(0): Printing DDC gathered Modelines: [ 4109.563] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4110.042] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 4110.043] (II) intel(0): Printing DDC gathered Modelines: [ 4110.043] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) [ 4212.980] (II) config/udev: removing device USB Optical Mouse [ 4212.981] (II) evdev: USB Optical Mouse: Close [ 4212.981] (II) UnloadModule: "evdev" [ 5052.058] (II) intel(0): EDID vendor "LPL", prod id 59392 [ 5052.211] (II) intel(0): Printing DDC gathered Modelines: [ 5052.211] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP) udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=100000 0 0 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=10382 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4 N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=15641 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll E: XKBVARIANT=, P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b 0 0 0 0 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=14622 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event5 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=18207 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll E: XKBVARIANT=, P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=100000 0 0 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=9321 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2 N: input/event2 E: BACKSPACE=guess E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=10004 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll E: XKBVARIANT=, P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 E: EV=21 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: TAGS=:seat: E: USEC_INITIALIZED=8907 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5/event1 N: input/event1 E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5/event1 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=7436 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0E_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=10275 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=13124 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll E: XKBVARIANT=, P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: NAME="HDA Intel Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=10 E: TAGS=:seat: E: USEC_INITIALIZED=600862 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event8 N: input/event8 E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event8 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: USEC_INITIALIZED=601111 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input16 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel Headphone" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=601356 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input16/event9 N: input/event9 E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input16/event9 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=601576 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=28890 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=4605 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:alt_shift_toggle,grp:switch,lv3:switch,terminate:ctrl_alt_bksp,grp_led:scroll E: XKBVARIANT=, P: /devices/platform/i8042/serio2/input/input11 E: ABS=11000003 E: DEVPATH=/devices/platform/i8042/serio2/input/input11 E: EV=b E: ID_FOR_SEAT=input-platform-i8042-serio-2 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-2 E: ID_PATH_TAG=platform-i8042-serio-2 E: ID_SERIAL=noserial E: KEY=6420 0 30000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0011v0002p0007e25B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw E: NAME="SynPS/2 Synaptics TouchPad" E: PHYS="isa0060/serio2/input0" E: PRODUCT=11/2/7/25b1 E: PROP=1 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=355729 P: /devices/platform/i8042/serio2/input/input11/event6 N: input/event6 S: input/by-path/platform-i8042-serio-2-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/platform/i8042/serio2/input/input11/event6 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-2 E: ID_PATH_TAG=platform-i8042-serio-2 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: USEC_INITIALIZED=356221 P: /devices/platform/i8042/serio2/input/input11/mouse0 N: input/mouse0 S: input/by-path/platform-i8042-serio-2-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/platform/i8042/serio2/input/input11/mouse0 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-2 E: ID_PATH_TAG=platform-i8042-serio-2 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=355849 P: /devices/platform/pcspkr/input/input14 E: DEVPATH=/devices/platform/pcspkr/input/input14 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=543869 P: /devices/platform/pcspkr/input/input14/event7 N: input/event7 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/platform/pcspkr/input/input14/event7 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=544341 DRM Information from dmesg: --------------------------- [ 1.154518] Linux agpgart interface v0.103 [ 1.154643] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 1.154664] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 1.154841] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.155000] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.211772] [drm] Initialized drm 1.1.0 20060810 [ 1.274114] [drm] Memory usable by graphics device = 256M [ 1.274121] [drm] Replacing VGA console driver [ 1.281464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.281469] [drm] Driver supports precise vblank timestamp query. [ 1.367403] [drm] initialized overlay support [ 1.495576] fbcon: inteldrmfb (fb0) is primary device [ 2.177722] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.177737] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 482.535391] agpgart-intel 0000:00:00.0: no hotplug settings from platform [ 482.535394] agpgart-intel 0000:00:00.0: using default PCI settings [ 482.535715] agpgart-intel 0000:00:00.0: no hotplug settings from platform [ 482.535718] agpgart-intel 0000:00:00.0: using default PCI settings [ 482.536053] agpgart-intel 0000:00:00.0: no hotplug settings from platform [ 482.536057] agpgart-intel 0000:00:00.0: using default PCI settings [ 482.536364] agpgart-intel 0000:00:00.0: no hotplug settings from platform [ 482.536367] agpgart-intel 0000:00:00.0: using default PCI settings [ 482.536672] agpgart-intel 0000:00:00.0: no hotplug settings from platform [ 482.536674] agpgart-intel 0000:00:00.0: using default PCI settings -- System Information: Debian Release: 8.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.16.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages xorg depends on: ii gnome-terminal [x-terminal-emulator] 3.14.1-1 ii libgl1-mesa-dri 10.3.2-1 ii libgl1-mesa-glx [libgl1] 10.3.2-1 ii libglu1-mesa 9.0.0-2 ii lxterminal [x-terminal-emulator] 0.2.0-1 ii x11-apps 7.7+4 ii x11-session-utils 7.7+1 ii x11-utils 7.7+2 ii x11-xkb-utils 7.7+1 ii x11-xserver-utils 7.7+3+b1 ii xauth 1:1.0.9-1 ii xfonts-100dpi 1:1.0.3 ii xfonts-75dpi 1:1.0.3 ii xfonts-base 1:1.0.3 ii xfonts-scalable 1:1.0.3-1 ii xfonts-utils 1:7.7+2 ii xinit 1.3.4-1 ii xkb-data 2.12-1 ii xorg-docs-core 1:1.7-1 ii xserver-xorg 1:7.7+7 ii xterm [x-terminal-emulator] 312-2 xorg recommends no packages. Versions of packages xorg suggests: pn x11-xfs-utils <none> pn xorg-docs <none> Versions of packages xserver-xorg depends on: ii libc6 2.19-18 ii x11-xkb-utils 7.7+1 ii xkb-data 2.12-1 ii xserver-xorg-core 2:1.16.4-1 ii xserver-xorg-input-all 1:7.7+7 ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.9.0-2 ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.1-1 ii xserver-xorg-input-synaptics [xorg-driver-input] 1.8.1-1 ii xserver-xorg-input-vmmouse [xorg-driver-input] 1:13.0.0-1+b3 ii xserver-xorg-input-wacom [xorg-driver-input] 0.26.0+20140918-1 ii xserver-xorg-video-all 1:7.7+7 ii xserver-xorg-video-ati [xorg-driver-video] 1:7.5.0-1 ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.2-2+b1 ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b2 ii xserver-xorg-video-geode [xorg-driver-video] 2.11.16-7 ii xserver-xorg-video-intel [xorg-driver-video] 2:2.21.15-2+b2 ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.4-2 ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.3-2+b1 ii xserver-xorg-video-modesetting [xorg-driver-video] 0.9.0-1+b1 ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.8-1+b2 ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.11-1 ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.3.3-1+b2 ii xserver-xorg-video-qxl [xorg-driver-video] 0.1.1-2+b1 ii xserver-xorg-video-r128 [xorg-driver-video] 6.9.2-1+b2 ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.5.0-1 ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.7-2+b2 ii xserver-xorg-video-siliconmotion [xorg-driver-video] 1:1.7.7-2+b2 ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.6-2+b2 ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.5-1+b2 ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.6-2+b2 ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.3-1+b3 ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.0.2-3.1 Versions of packages xserver-xorg recommends: ii libgl1-mesa-dri 10.3.2-1 -- no debconf information -- To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150501204340.11769.55402.reportbug@notebook
