Package: xserver-xfree86
Version: 4.3.0.dfsg.1-12.0.1
Severity: normal
The vertical refresh range question says:
"Please enter either a comma-separated list of discrete values (for
fixed-frequency displays), or a pair of values separated by a dash
(all modern CRT's). This information should be available in your
monitor's manual. Values lower than 50 or higher than 160 are extremely rare.
Enter your monitor's vertical refresh range."
But if I enter "60, 75" "60 , 75" or "60,75" (valid values for my
monitor) I get the error text that says:
"Please enter a comma-separated list of ranges or values.
The valid syntax is a comma-separated list of discrete values, or a pair
of values separated by a dash."
-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86
/etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum.
X server symlink status:
lrwxrwxrwx 1 root root 20 2005-05-11 15:47 /etc/X11/X -> /usr/bin/X11/XFree86
-rwxr-xr-x 1 root root 1745900 2005-02-23 02:07 /usr/bin/X11/XFree86
Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86
VGA-compatible devices on PCI bus:
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev
85)
/etc/X11/XF86Config-4 unchanged from checksum in
/var/lib/xfree86/XF86Config-4.md5sum.
XFree86 X server configuration file status:
-rw-r--r-- 1 root root 2799 2005-05-12 08:12 /etc/X11/XF86Config-4
Contents of /etc/X11/XF86Config-4:
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Matrox G450"
Driver "mga"
VideoRam 32768
EndSection
Section "Monitor"
Identifier "ViewSonic VG910S"
HorizSync 60-80
VertRefresh 60-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Matrox G450"
Monitor "ViewSonic VG910S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
No XFree86 X server log files found.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.11
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages xserver-xfree86 depends on:
ii debconf [debconf-2.0 1.4.30.13 Debian configuration management sy
ii libc6 2.3.2.ds1-21 GNU C Library: Shared libraries an
ii libgcc1 1:3.4.3-12 GCC support library
ii xserver-common 4.3.0.dfsg.1-12.0.1 files and utilities common to all
ii zlib1g 1:1.2.2-4 compression library - runtime
-- debconf information:
* xserver-xfree86/config/device/identifier: Matrox G450
xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm)
* xserver-xfree86/config/device/use_fbdev: false
* xserver-xfree86/config/monitor/selection-method: Advanced
xserver-xfree86/config/doublequote_in_string_error:
shared/default-x-server: xserver-xfree86
* xserver-xfree86/config/inputdevice/mouse/emulate3buttons: false
* xserver-xfree86/config/device/bus_id:
* xserver-xfree86/config/inputdevice/keyboard/layout: us
* xserver-xfree86/config/monitor/horiz-sync: 60-80
* xserver-xfree86/config/monitor/identifier: ViewSonic VG910S
shared/no_known_x-server:
* xserver-xfree86/autodetect_mouse: false
* xserver-xfree86/config/device/video_ram: 32768
xserver-xfree86/config/monitor/mode-list: 1280x960 @ 60Hz
* xserver-xfree86/config/monitor/lcd: true
xserver-xfree86/config/inputdevice/keyboard/internal:
* xserver-xfree86/config/inputdevice/keyboard/rules: xfree86
* xserver-xfree86/multiple_possible_x-drivers:
* xserver-xfree86/config/inputdevice/keyboard/model: pc104
* xserver-xfree86/config/write_dri_section: true
* xserver-xfree86/config/device/driver: mga
* xserver-xfree86/config/monitor/vert-refresh: 60-75
* xserver-xfree86/config/display/default_depth: 24
* xserver-xfree86/config/inputdevice/mouse/zaxismapping: true
* xserver-xfree86/config/display/modes: 1280x1024
xserver-xfree86/config/device/bus_id_error:
* xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod,
freetype, glx, int10, record, speedo, type1, vbe
* xserver-xfree86/config/inputdevice/keyboard/options:
xserver-xfree86/config/nonnumeric_string_error:
xserver-xfree86/config/inputdevice/mouse/protocol: ImPS/2
* shared/multiple_possible_x-servers:
xserver-xfree86/config/null_string_error:
* xserver-xfree86/config/monitor/range_input_error:
* xserver-xfree86/autodetect_video_card: true
* xserver-xfree86/config/inputdevice/keyboard/variant:
* xserver-xfree86/config/inputdevice/mouse/port: /dev/input/mice
* xserver-xfree86/config/write_files_section: true
* xserver-xfree86/autodetect_monitor: false
--
Tom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
