Dear Pedro, dear Thomas,
Am Dienstag, den 24.07.2012, 11:31 +0200 schrieb Paul Menzel:
> thank you very much for your answer. Unfortunately Thomas probably did
> not get your reply since you did not put him into CC. You can avoid that
> problem by downloading all messages belonging to that report
>
> $ sudo aptitude install devscripts
> $ bts show --mbox 663653
>
> and import the mbox file under `~/.devscripts-cache/bts/663653.mbox`
> into Icedove. Then just do a reply to all to the appropriate message.
> That would be awesome.
>
>
> Am Donnerstag, den 22.03.2012, 02:51 +0000 schrieb Pedro Ângelo:
>
> > I have a similar problem on a laptop with hybrid ati/intel dual graphics.
>
> What laptop do you have? Maybe also attach or paste the output of
> `lspci`.
>
> > I've managed to get it working by blacklisting the i915 module and got
> > to where you were at with a blank screen but an ok xorg.log
>
> Could you attach `/var/log/Xorg.0.log` please?
>
> > I tried fiddling with the brightness controls on the laptop and it
> > worked, so you might try that.
>
> Oh, so the brightness was just turned down. Nice one! Great you found
> it.
>
> > I hope this SNA support eventually lands on testing to see if I can use
> > the laptop without all these fiddly configs.
>
> `xserver-xorg-video-intel` 2:2.19.0-4 in Debian Wheezy/testing is
> compiled with SNA support. You have to enable it though. For example
> create `/etc/X11/xorg.conf.d/99-local.conf` with the following content.
>
> Section "Device";
> Identifier "Device0";
> Driver "intel";
> Option "AccelMethod" "sna"
> EndSection
I think you need to remove all ; at the end of the lines.
Section "Device"
Identifier "Device0"
Driver "intel"
Option "AccelMethod" "sna"
EndSection
Thanks,
Paul
> PS: I still do not know what the error is. Could someone give a short
> explanation, please?
signature.asc
Description: This is a digitally signed message part
