--- Begin Message ---
Package: xserver-xorg-video-intel
Version: 2:2.13.0-6
Severity: important
Hi there!
Well, the subject says all.
I tried to play a DivX video in Totem (simply double-clicking on it from
Nautilus), then I left before the video started and when I came back the
screen was flickering between two previous console states [1].
[1] I am experiencing some libata errors linked to a tape drive, so
there are plenty of error messages on the console
<https://ata.wiki.kernel.org/index.php/Libata_error_messages>
Restarting GDM3 caused me to discover the error in the X.Org log [2][3],
and I am sorry I did not check it before, so I do not really what was
the cause of Totem crashing.
[3] why do I have 4 different of them?
[4] why is GDM3 never picking up VT 7?
=====
luca.capello@tinello:~$ grep VT /var/log/Xorg.*
/var/log/Xorg.0.log:(++) using VT number 8
/var/log/Xorg.0.log.old:(++) using VT number 9
/var/log/Xorg.1.log:(++) using VT number 8
/var/log/Xorg.1.log:(II) AIGLX: Suspending AIGLX clients for VT switch
/var/log/Xorg.1.log.old:(++) using VT number 8
/var/log/Xorg.1.log.old:(II) AIGLX: Suspending AIGLX clients for VT switch
/var/log/Xorg.2.log:(++) using VT number 9
/var/log/Xorg.2.log:(II) AIGLX: Suspending AIGLX clients for VT switch
/var/log/Xorg.2.log.old:(++) using VT number 9
/var/log/Xorg.2.log.old:(II) AIGLX: Suspending AIGLX clients for VT switch
/var/log/Xorg.3.log:(++) using VT number 9
/var/log/Xorg.3.log:(II) AIGLX: Suspending AIGLX clients for VT switch
luca.capello@tinello:~$
=====
Please note that this is the first time my parents' computer has had
such an error: today I installed the 2.6.38 kernel from wheezy (no other
backport available) and the network card (8086:1503, Intel 82579V rev
04) needed at least 2.6.37. This action was done to check if the libata
error above was still there (which is, FWIW).
Given that the machine in question is doing some wiping as another user
(luckily on a GNU screen session), I will not stop it for the next 12
hours, in case there is need for some tests.
FYI, while now all the 8GB of RAM are full, I also tried when only 5GB
of them were occupied, but with no luck.
Thx, bye,
Gismo / Luca
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Feb 26 22:08 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1889472 Feb 18 21:42 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge
Integrated Graphics Controller [8086:0102] (rev 09)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 26841 Mar 7 22:25 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 26846 Apr 16 11:30 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 26846 Apr 24 20:16 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 15148 Apr 26 00:42 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian
Current Operating System: Linux tinello 2.6.38-2-amd64 #1 SMP Thu Apr 7
04:28:07 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64
root=/dev/mapper/tinello-root ro quiet
Build Date: 18 February 2011 08:27:24PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <k...@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 26 00:42:39 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x7c8aa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8
(--) PCI:*(0:0:2:0) 8086:0102:8086:2002 Intel Corporation Sandy Bridge
Integrated Graphics Controller rev 9, Mem @ 0xfe000000/4194304,
0xe0000000/268435456, I/O @ 0x0000f000/64
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
(--) intel(0): Chipset: "Sandybridge"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait disabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: ACR Model: ad73 Serial#: 1880097031
(II) intel(0): Year: 2007 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) intel(0): Gamma: 2.07
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.634 redY: 0.354 greenX: 0.286 greenY: 0.620
(II) intel(0): blueX: 0.138 blueY: 0.076 whiteX: 0.312 whiteY: 0.328
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
(II) intel(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) intel(0): #5: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) intel(0): #6: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) intel(0): #7: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) intel(0): L7308169420D
(II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz,
PixClock max 145 MHz
(II) intel(0): Monitor name: Acer AL1917
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff00047273ad07011070
(II) intel(0): 0111010368261e6b2a6760a25a499e23
(II) intel(0): 135054bfef00818f8180714f7140614f
(II) intel(0): 6140454f4540302a009851002a403070
(II) intel(0): 1300782d1100001e000000fe004c3733
(II) intel(0): 3038313639343230440a000000fd0037
(II) intel(0): 4b1e530e000a202020202020000000fc
(II) intel(0): 004163657220414c313931370a2000b7
(II) intel(0): EDID vendor "ACR", prod id 44403
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525
-hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865
868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865
868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491
520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486
525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output HDMI2
(II) intel(0): EDID for output DP2
(II) intel(0): Output VGA1 connected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA1 using initial mode 1280x1024
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (380, 300) mm
(**) intel(0): DPI set to (85, 86)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(EE) intel(0): Failed to allocate framebuffer.
(EE) intel(0): Couldn't allocate initial framebuffer.
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: DEVLINKS=/dev/char/13:68
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: DEVLINKS=/dev/char/13:67
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-id/usb-BTC_USB_Multimedia_Keyboard-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.5:1.0-event-kbd
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=BTC
E: ID_VENDOR_ENC=BTC
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Multimedia_Keyboard
E: ID_MODEL_ENC=USB\x20Multimedia\x20Keyboard
E: ID_MODEL_ID=c313
E: ID_REVISION=0100
E: ID_SERIAL=BTC_USB_Multimedia_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.5:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: DEVLINKS=/dev/char/13:64
/dev/input/by-id/usb-BTC_USB_Multimedia_Keyboard-event-kbd
/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.5:1.0-event-kbd
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-id/usb-BTC_USB_Multimedia_Keyboard-event-if01
S: input/by-path/pci-0000:00:1a.0-usb-0:1.5:1.1-event
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=BTC
E: ID_VENDOR_ENC=BTC
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Multimedia_Keyboard
E: ID_MODEL_ENC=USB\x20Multimedia\x20Keyboard
E: ID_MODEL_ID=c313
E: ID_REVISION=0100
E: ID_SERIAL=BTC_USB_Multimedia_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.5:1.1
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: DEVLINKS=/dev/char/13:65
/dev/input/by-id/usb-BTC_USB_Multimedia_Keyboard-event-if01
/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.5:1.1-event
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2/event2
N: input/event2
S: char/13:66
S: input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.6:1.0-event-mouse
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB-PS_2_Optical_Mouse
E: ID_MODEL_ENC=USB-PS\x2f2\x20Optical\x20Mouse
E: ID_MODEL_ID=c00e
E: ID_REVISION=1110
E: ID_SERIAL=Logitech_USB-PS_2_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.6:1.0
E: DEVLINKS=/dev/char/13:66
/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.6:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2/mouse0
N: input/mouse0
S: char/13:32
S: input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.6:1.0-mouse
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB-PS_2_Optical_Mouse
E: ID_MODEL_ENC=USB-PS\x2f2\x20Optical\x20Mouse
E: ID_MODEL_ID=c00e
E: ID_REVISION=1110
E: ID_SERIAL=Logitech_USB-PS_2_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.6:1.0
E: DEVLINKS=/dev/char/13:32
/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-mouse
/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.6:1.0-mouse
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
N: input/event6
S: char/13:70
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DEVLINKS=/dev/char/13:70
E: TAGS=:udev-acl:
P: /devices/platform/pcspkr/input/input5/event5
N: input/event5
S: char/13:69
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DEVLINKS=/dev/char/13:69 /dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 6.0.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii libdrm-intel1 2.4.21-1~squeeze3 Userspace interface to intel-speci
ii libdrm2 2.4.21-1~squeeze3 Userspace interface to kernel DRM
ii libpciaccess0 0.12.0-1 Generic PCI access library for X
ii libx11-6 2:1.3.3-4 X11 client-side library
ii libx11-xcb1 2:1.3.3-4 Xlib/XCB interface library
ii libxcb-aux0 0.3.6-1 utility libraries for X C Binding
ii libxcb-dri2-0 1.6-1 X C Binding, dri2 extension
ii libxcb1 1.6-1 X C Binding
ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.5-1 X11 miscellaneous 'fixes' extensio
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii xserver-xorg-core [xor 2:1.7.7-13 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
pgpWD1brBkoEQ.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
Version: 2:2.15.0-3~bpo60+2
Hi there!
On Sun, 25 Sep 2011 16:39:20 +0200, Julien Cristau wrote:
> On Tue, Apr 26, 2011 at 08:21:01 +0200, Cyril Brulebois wrote:
>> Luca Capello <l...@pca.it> (26/04/2011):
>> Anyway, you might want to try a x-x-v-intel backport for SandyBridge
>> when they come up, proposed backports policy there:
>> http://pkg-xorg.alioth.debian.org/reference/squeeze-backports.html
>>
> No reply, closing.
The computer was at my parents', which means that I could not do any
test remotely. Christmas holidays helped, so here I am.
The crash was still present and, as I discovered, caused not only by
totem, but also by cheese and a Logitech Webcam C160, here the
relevant log:
=====
(II) config/udev: Adding input device UVC Camera (046d:0824) (/dev/input/event6)
(**) UVC Camera (046d:0824): Applying InputClass "evdev keyboard catchall"
(**) UVC Camera (046d:0824): always reports core events
(**) UVC Camera (046d:0824): Device: "/dev/input/event6"
(II) UVC Camera (046d:0824): Found keys
(II) UVC Camera (046d:0824): Configuring as keyboard
(II) XINPUT: Adding extended input device "UVC Camera (046d:0824)" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
[...]
(II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865
868 895 -hsync +vsync (53.7 kHz)
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[previous line repeated 63 times]
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
(WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(EE) intel(0): failed to set mode: Operation not permitted
Fatal server error:
EnterVT failed for screen 0
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
(II) UVC Camera (046d:0824): Close
(II) UnloadModule: "evdev"
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) BTC USB Multimedia Keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
=====
As suggested by Cyril, upgrading to the squeeze-backports version solved
the issue:
=====
root@tinello:~/# apt-get -t squeeze-backports --purge install
xserver-xorg-video-intel
[...]
I seguenti pacchetti saranno inoltre installati:
libdrm-intel1 libdrm-nouveau1a libgl1-mesa-dri libxfont1
xserver-common xserver-xorg-core xserver-xorg-input-evdev
xserver-xorg-input-synaptics
xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-apm
xserver-xorg-video-ark xserver-xorg-video-ati xserver-xorg-video-chips
xserver-xorg-video-cirrus xserver-xorg-video-fbdev
xserver-xorg-video-i128 xserver-xorg-video-mach64
xserver-xorg-video-mga xserver-xorg-video-neomagic
xserver-xorg-video-nouveau xserver-xorg-video-openchrome
xserver-xorg-video-r128 xserver-xorg-video-radeon
xserver-xorg-video-rendition
xserver-xorg-video-s3 xserver-xorg-video-s3virge
xserver-xorg-video-savage xserver-xorg-video-siliconmotion
xserver-xorg-video-sis
xserver-xorg-video-sisusb xserver-xorg-video-tdfx
xserver-xorg-video-trident xserver-xorg-video-tseng
xserver-xorg-video-vesa xserver-xorg-video-vmware
xserver-xorg-video-voodoo
I seguenti pacchetti saranno RIMOSSI:
libdrm-nouveau1* xserver-xorg-video-nv*
I seguenti pacchetti NUOVI saranno installati:
libdrm-nouveau1a
I seguenti pacchetti saranno aggiornati:
libdrm-intel1 libgl1-mesa-dri libxfont1 xserver-common
xserver-xorg-core xserver-xorg-input-evdev
xserver-xorg-input-synaptics xserver-xorg-input-wacom
xserver-xorg-video-all xserver-xorg-video-apm xserver-xorg-video-ark
xserver-xorg-video-ati xserver-xorg-video-chips
xserver-xorg-video-cirrus
xserver-xorg-video-fbdev xserver-xorg-video-i128
xserver-xorg-video-intel xserver-xorg-video-mach64
xserver-xorg-video-mga xserver-xorg-video-neomagic
xserver-xorg-video-nouveau xserver-xorg-video-openchrome
xserver-xorg-video-r128 xserver-xorg-video-radeon
xserver-xorg-video-rendition
xserver-xorg-video-s3 xserver-xorg-video-s3virge
xserver-xorg-video-savage xserver-xorg-video-siliconmotion
xserver-xorg-video-sis
xserver-xorg-video-sisusb xserver-xorg-video-tdfx
xserver-xorg-video-trident xserver-xorg-video-tseng
xserver-xorg-video-vesa xserver-xorg-video-vmware
xserver-xorg-video-voodoo
[...]
Preparativi per sostituire xserver-xorg-video-intel v.2:2.13.0-6 \
(utilizzando .../xserver-xorg-video-intel_2%3a2.15.0-3~bpo60+2_amd64.deb)...
=====
Thx, bye,
Gismo / Luca
pgpXzifAHWrYN.pgp
Description: PGP signature
--- End Message ---
