--- Begin Message ---
Package: xserver-xorg-video-intel
Version: 2:2.14.0-4
Severity: important
Hi,
After a dist-upgrade of my Wheezy desktop, xserver-xorg is updating from
1:7.5+8 to 1:7.6+6, xserver-xorg-core from 2:1.7.7-13 to 2:1.9.5-1,
xserver-xorg-video-intel from 2:2.13.0-6 to 2:2.14.0-4 and all the xorg
packages are update, I restarted my Gnome session and I have a white screen
striped with horizontal black lines. Xorg does not work, the graphic is
unusable, only the consoles (ctrl-alt-F2) operate.
Before this update, Intel drivers, Xorg and KMS are working properly with good
resolution.
I'll try to put the previous versions.
Regards.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Mar 26 2007 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1783236 Mar 26 08:55 /usr/bin/Xorg
Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/libGL.so.1 to /usr/lib/fglrx/diversions/libGL.so.1 by
fglrx-glx
diversion of /usr/lib/xorg/modules/extensions/libglx.so to
/usr/lib/fglrx/diversions/libglx.so by fglrx-driver
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/fglrx/diversions/libGL.so.1.2 by
fglrx-glx
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 82946GZ/GL
Integrated Graphics Controller [8086:2972] (rev 02)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 1411 Apr 15 12:54 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
#Section "InputDevice"
# Identifier "Logitech LX3"
# Driver "evdev"
# Option "CorePointer"
# Option "Name" "Logitech USB-PS/2 Optical Mouse"
# #Option "ZAxisMapping" "4 5" # facultatif
# Option "HWHEELRelativeAxisButtons" "7 6"
#EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.38-1-686 (Debian 2.6.38-1) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Wed Mar 16 17:37:47 UTC 2011
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 29062 Apr 3 2009 /var/log/Xorg.22.log
-rw-r--r-- 1 root root 31969 Apr 3 2009 /var/log/Xorg.21.log
-rw-r--r-- 1 root root 50518 Sep 21 2009 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 24082 Apr 15 14:37 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 34.443]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 34.443] X Protocol Version 11, Revision 0
[ 34.443] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 34.443] Current Operating System: Linux cthulhu 2.6.38-1-686 #1 SMP Wed
Mar 16 17:37:47 UTC 2011 i686
[ 34.444] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-1-686
root=UUID=5b77c12a-d076-4d52-9307-57c3fe25832a ro
[ 34.444] Build Date: 26 March 2011 07:50:38AM
[ 34.444] xorg-server 2:1.9.5-1 (Cyril Brulebois <k...@debian.org>)
[ 34.444] Current version of pixman: 0.21.4
[ 34.444] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 34.444] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.444] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 15 14:26:55
2011
[ 34.540] (==) Using config file: "/etc/X11/xorg.conf"
[ 34.540] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.584] (==) No Layout section. Using the first Screen section.
[ 34.584] (**) |-->Screen "Default Screen" (0)
[ 34.584] (**) | |-->Monitor "Configured Monitor"
[ 34.608] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 34.608] (**) | |-->Device "Configured Video Device"
[ 34.609] (==) Automatically adding devices
[ 34.609] (==) Automatically enabling devices
[ 34.837] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 34.837] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 34.837] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 34.837] (II) Loader magic: 0x81f9f60
[ 34.837] (II) Module ABI versions:
[ 34.837] X.Org ANSI C Emulation: 0.4
[ 34.837] X.Org Video Driver: 8.0
[ 34.837] X.Org XInput driver : 11.0
[ 34.837] X.Org Server Extension : 4.0
[ 34.838] (--) PCI:*(0:0:2:0) 8086:2972:1043:823b rev 2, Mem @
0xfe900000/1048576, 0xe0000000/268435456, I/O @ 0x0000dc00/8
[ 34.838] (II) Open ACPI successful (/var/run/acpid.socket)
[ 34.838] (II) LoadModule: "extmod"
[ 34.924] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 34.960] (II) Module extmod: vendor="X.Org Foundation"
[ 34.960] compiled for 1.9.5, module version = 1.0.0
[ 34.960] Module class: X.Org Server Extension
[ 34.960] ABI class: X.Org Server Extension, version 4.0
[ 34.960] (II) Loading extension SELinux
[ 34.960] (II) Loading extension MIT-SCREEN-SAVER
[ 34.960] (II) Loading extension XFree86-VidModeExtension
[ 34.960] (II) Loading extension XFree86-DGA
[ 34.960] (II) Loading extension DPMS
[ 34.960] (II) Loading extension XVideo
[ 34.960] (II) Loading extension XVideo-MotionCompensation
[ 34.960] (II) Loading extension X-Resource
[ 34.960] (II) LoadModule: "dbe"
[ 34.960] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 34.970] (II) Module dbe: vendor="X.Org Foundation"
[ 34.970] compiled for 1.9.5, module version = 1.0.0
[ 34.970] Module class: X.Org Server Extension
[ 34.970] ABI class: X.Org Server Extension, version 4.0
[ 34.970] (II) Loading extension DOUBLE-BUFFER
[ 34.970] (II) LoadModule: "glx"
[ 34.991] (II) Loading /usr/lib/xorg/modules/extensions/fglrx/libglx.so
[ 35.039] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 35.039] compiled for 6.9.0, module version = 1.0.0
[ 35.039] (II) Loading extension GLX
[ 35.039] (II) LoadModule: "record"
[ 35.039] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 35.040] (II) Module record: vendor="X.Org Foundation"
[ 35.040] compiled for 1.9.5, module version = 1.13.0
[ 35.040] Module class: X.Org Server Extension
[ 35.040] ABI class: X.Org Server Extension, version 4.0
[ 35.040] (II) Loading extension RECORD
[ 35.040] (II) LoadModule: "dri"
[ 35.040] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 35.059] (II) Module dri: vendor="X.Org Foundation"
[ 35.059] compiled for 1.9.5, module version = 1.0.0
[ 35.059] ABI class: X.Org Server Extension, version 4.0
[ 35.059] (II) Loading extension XFree86-DRI
[ 35.059] (II) LoadModule: "dri2"
[ 35.059] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 35.060] (II) Module dri2: vendor="X.Org Foundation"
[ 35.060] compiled for 1.9.5, module version = 1.2.0
[ 35.060] ABI class: X.Org Server Extension, version 4.0
[ 35.060] (II) Loading extension DRI2
[ 35.060] (==) Matched intel as autoconfigured driver 0
[ 35.060] (==) Matched vesa as autoconfigured driver 1
[ 35.060] (==) Matched fbdev as autoconfigured driver 2
[ 35.060] (==) Assigned the driver to the xf86ConfigLayout
[ 35.060] (II) LoadModule: "intel"
[ 35.123] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 35.190] (II) Module intel: vendor="X.Org Foundation"
[ 35.190] compiled for 1.9.4, module version = 2.14.0
[ 35.190] Module class: X.Org Video Driver
[ 35.190] ABI class: X.Org Video Driver, version 8.0
[ 35.190] (II) LoadModule: "vesa"
[ 35.192] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.199] (II) Module vesa: vendor="X.Org Foundation"
[ 35.199] compiled for 1.9.4, module version = 2.3.0
[ 35.200] Module class: X.Org Video Driver
[ 35.200] ABI class: X.Org Video Driver, version 8.0
[ 35.200] (II) LoadModule: "fbdev"
[ 35.200] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.213] (II) Module fbdev: vendor="X.Org Foundation"
[ 35.213] compiled for 1.9.4, module version = 0.4.2
[ 35.213] ABI class: X.Org Video Driver, version 8.0
[ 35.213] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 35.214] (II) VESA: driver for VESA chipsets: vesa
[ 35.214] (II) FBDEV: driver for framebuffer: fbdev
[ 35.214] (++) using VT number 7
[ 35.226] (WW) Falling back to old probe method for vesa
[ 35.226] (WW) Falling back to old probe method for fbdev
[ 35.226] (II) Loading sub module "fbdevhw"
[ 35.226] (II) LoadModule: "fbdevhw"
[ 35.236] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.251] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 35.251] compiled for 1.9.5, module version = 0.0.2
[ 35.252] ABI class: X.Org Video Driver, version 8.0
[ 35.252] drmOpenDevice: node name is /dev/dri/card0
[ 35.252] drmOpenDevice: open result is 9, (OK)
[ 35.252] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 35.252] drmOpenDevice: node name is /dev/dri/card0
[ 35.252] drmOpenDevice: open result is 9, (OK)
[ 35.252] drmOpenByBusid: drmOpenMinor returns 9
[ 35.252] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 35.252] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen" for depth/fbbpp 24/32
[ 35.252] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 35.252] (==) intel(0): RGB weight 888
[ 35.252] (==) intel(0): Default visual is TrueColor
[ 35.252] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
[ 35.252] (--) intel(0): Chipset: "946GZ"
[ 35.252] (**) intel(0): Tiling enabled
[ 35.252] (**) intel(0): SwapBuffers wait enabled
[ 35.252] (==) intel(0): video overlay key set to 0x101fe
[ 35.312] (II) intel(0): Output VGA1 using monitor section Configured Monitor
[ 35.384] (II) intel(0): EDID for output VGA1
[ 35.384] (II) intel(0): Manufacturer: VSC Model: 5120 Serial#: 16843009
[ 35.384] (II) intel(0): Year: 2009 Week: 42
[ 35.384] (II) intel(0): EDID Version: 1.3
[ 35.384] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 35.384] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 35.404] (II) intel(0): Max Image Size [cm]: horiz.: 49 vert.: 29
[ 35.404] (II) intel(0): Gamma: 2.20
[ 35.404] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 35.404] (II) intel(0): Default color space is primary color space
[ 35.404] (II) intel(0): First detailed timing is preferred mode
[ 35.404] (II) intel(0): redX: 0.651 redY: 0.330 greenX: 0.267 greenY:
0.630
[ 35.404] (II) intel(0): blueX: 0.145 blueY: 0.080 whiteX: 0.313 whiteY:
0.329
[ 35.404] (II) intel(0): Supported established timings:
[ 35.404] (II) intel(0): 720x400@70Hz
[ 35.404] (II) intel(0): 640x480@60Hz
[ 35.404] (II) intel(0): 640x480@67Hz
[ 35.404] (II) intel(0): 640x480@72Hz
[ 35.404] (II) intel(0): 640x480@75Hz
[ 35.404] (II) intel(0): 800x600@56Hz
[ 35.404] (II) intel(0): 800x600@60Hz
[ 35.404] (II) intel(0): 800x600@72Hz
[ 35.404] (II) intel(0): 800x600@75Hz
[ 35.404] (II) intel(0): 832x624@75Hz
[ 35.404] (II) intel(0): 1024x768@60Hz
[ 35.404] (II) intel(0): 1024x768@70Hz
[ 35.404] (II) intel(0): 1024x768@75Hz
[ 35.404] (II) intel(0): 1280x1024@75Hz
[ 35.404] (II) intel(0): 1152x864@75Hz
[ 35.404] (II) intel(0): Manufacturer's mask: 0
[ 35.404] (II) intel(0): Supported standard timings:
[ 35.404] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 35.404] (II) intel(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 35.404] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 35.404] (II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 35.404] (II) intel(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 35.404] (II) intel(0): Supported detailed timing:
[ 35.404] (II) intel(0): clock: 146.2 MHz Image Size: 495 x 291 mm
[ 35.404] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960
h_blank_end 2240 h_border: 0
[ 35.405] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059
v_blanking: 1089 v_border: 0
[ 35.405] (II) intel(0): Serial No: QQK094280294
[ 35.405] (II) intel(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82
kHz, PixClock max 175 MHz
[ 35.405] (II) intel(0): Monitor name: VA2226w
[ 35.405] (II) intel(0): EDID (in hex):
[ 35.405] (II) intel(0): 00ffffffffffff005a63205101010101
[ 35.405] (II) intel(0): 2a1301030e311d782ee525a65444a125
[ 35.405] (II) intel(0): 145054bfef80b300a94081808140714f
[ 35.405] (II) intel(0): 01010101010121399030621a274068b0
[ 35.405] (II) intel(0): 3600ef231100001c000000ff0051514b
[ 35.405] (II) intel(0): 3039343238303239340a000000fd0032
[ 35.405] (II) intel(0): 4b1e5211000a202020202020000000fc
[ 35.405] (II) intel(0): 00564132323236770a202020202000de
[ 35.405] (II) intel(0): EDID vendor "VSC", prod id 20768
[ 35.405] (II) intel(0): Using EDID range info for horizontal sync
[ 35.405] (II) intel(0): Using EDID range info for vertical refresh
[ 35.405] (II) intel(0): Printing DDC gathered Modelines:
[ 35.405] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 35.405] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 35.405] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 35.405] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 35.405] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz)
[ 35.405] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 35.405] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 35.405] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 35.405] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 35.405] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 35.405] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 35.405] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 35.405] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 35.405] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 35.405] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 35.405] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 35.405] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 35.405] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 35.405] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 35.405] (II) intel(0): Printing probed modes for output VGA1
[ 35.405] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 35.405] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 35.406] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 35.406] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 35.406] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 35.406] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 35.406] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 35.406] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 35.406] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 35.406] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz)
[ 35.406] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 35.406] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 35.406] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 35.406] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 35.406] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 491 520 -hsync -vsync (37.9 kHz)
[ 35.406] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 35.406] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz)
[ 35.406] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 35.406] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz)
[ 35.406] (II) intel(0): Output VGA1 connected
[ 35.406] (II) intel(0): Using exact sizes for initial modes
[ 35.406] (II) intel(0): Output VGA1 using initial mode 1680x1050
[ 35.406] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 35.406] (II) intel(0): Kernel page flipping support detected, enabling
[ 35.406] (**) intel(0): Display dimensions: (490, 290) mm
[ 35.406] (**) intel(0): DPI set to (87, 91)
[ 35.406] (II) Loading sub module "fb"
[ 35.406] (II) LoadModule: "fb"
[ 35.406] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 35.431] (II) Module fb: vendor="X.Org Foundation"
[ 35.431] compiled for 1.9.5, module version = 1.0.0
[ 35.431] ABI class: X.Org ANSI C Emulation, version 0.4
[ 35.431] (II) UnloadModule: "vesa"
[ 35.431] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.431] (II) UnloadModule: "fbdev"
[ 35.431] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.431] (II) UnloadModule: "fbdevhw"
[ 35.431] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.431] (==) Depth 24 pixmap format is 32 bpp
[ 35.431] (==) intel(0): VideoRam: 262144 KB
[ 35.431] (II) intel(0): [DRI2] Setup complete
[ 35.431] (II) intel(0): [DRI2] DRI driver: i915
[ 35.431] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168,
tiled
[ 35.444] (II) UXA(0): Driver registered support for the following
operations:
[ 35.444] (II) solid
[ 35.444] (II) copy
[ 35.444] (II) composite (RENDER acceleration)
[ 35.444] (II) put_image
[ 35.444] (II) get_image
[ 35.456] (==) intel(0): Backing store disabled
[ 35.456] (==) intel(0): Silken mouse enabled
[ 35.462] (II) intel(0): Initializing HW Cursor
[ 35.492] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 35.492] (==) intel(0): DPMS enabled
[ 35.492] (==) intel(0): Intel XvMC decoder disabled
[ 35.492] (II) intel(0): Set up textured video
[ 35.492] (II) intel(0): Set up overlay video
[ 35.492] (II) intel(0): direct rendering: DRI2 Enabled
[ 35.492] (==) intel(0): hotplug detection: "enabled"
[ 35.493] (--) RandR disabled
[ 35.493] (II) Initializing built-in extension Generic Event Extension
[ 35.493] (II) Initializing built-in extension SHAPE
[ 35.493] (II) Initializing built-in extension MIT-SHM
[ 35.493] (II) Initializing built-in extension XInputExtension
[ 35.493] (II) Initializing built-in extension XTEST
[ 35.493] (II) Initializing built-in extension BIG-REQUESTS
[ 35.493] (II) Initializing built-in extension SYNC
[ 35.493] (II) Initializing built-in extension XKEYBOARD
[ 35.493] (II) Initializing built-in extension XC-MISC
[ 35.493] (II) Initializing built-in extension SECURITY
[ 35.493] (II) Initializing built-in extension XINERAMA
[ 35.493] (II) Initializing built-in extension XFIXES
[ 35.493] (II) Initializing built-in extension RENDER
[ 35.493] (II) Initializing built-in extension RANDR
[ 35.493] (II) Initializing built-in extension COMPOSITE
[ 35.493] (II) Initializing built-in extension DAMAGE
[ 35.493] (II) SELinux: Disabled on system
[ 35.500] (EE) GLX error: Can not get required symbols.
[ 35.525] (II) intel(0): Setting screen physical size to 444 x 277
[ 37.385] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 37.385] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 37.385] (II) LoadModule: "evdev"
[ 37.524] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 37.531] (II) Module evdev: vendor="X.Org Foundation"
[ 37.531] compiled for 1.9.4, module version = 2.6.0
[ 37.531] Module class: X.Org XInput Driver
[ 37.531] ABI class: X.Org XInput driver, version 11.0
[ 37.531] (**) Power Button: always reports core events
[ 37.531] (**) Power Button: Device: "/dev/input/event3"
[ 37.552] (--) Power Button: Found keys
[ 37.552] (II) Power Button: Configuring as keyboard
[ 37.552] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 37.552] (**) Option "xkb_rules" "evdev"
[ 37.552] (**) Option "xkb_model" "logitech_base"
[ 37.552] (**) Option "xkb_layout" "fr"
[ 37.552] (**) Option "xkb_options" "lv3:ralt_switch"
[ 37.679] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 37.679] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 37.679] (**) Power Button: always reports core events
[ 37.679] (**) Power Button: Device: "/dev/input/event2"
[ 37.696] (--) Power Button: Found keys
[ 37.696] (II) Power Button: Configuring as keyboard
[ 37.696] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD)
[ 37.696] (**) Option "xkb_rules" "evdev"
[ 37.696] (**) Option "xkb_model" "logitech_base"
[ 37.696] (**) Option "xkb_layout" "fr"
[ 37.696] (**) Option "xkb_options" "lv3:ralt_switch"
[ 37.703] (II) config/udev: Adding input device Logitech USB-PS/2 Optical
Mouse (/dev/input/event1)
[ 37.703] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev
pointer catchall"
[ 37.703] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 37.703] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 37.720] (--) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 37.720] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 37.720] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 37.720] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 37.720] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 37.720] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 37.720] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 37.720] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 37.720] (II) XINPUT: Adding extended input device "Logitech USB-PS/2
Optical Mouse" (type: MOUSE)
[ 37.720] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration
scheme 1
[ 37.720] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 37.720] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor:
2.000
[ 37.720] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration
threshold: 4
[ 37.720] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative
axes.
[ 37.721] (II) config/udev: Adding input device Logitech USB-PS/2 Optical
Mouse (/dev/input/mouse0)
[ 37.721] (II) No input driver/identifier specified (ignoring)
[ 37.728] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 37.728] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 37.728] (**) AT Translated Set 2 keyboard: always reports core events
[ 37.728] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 37.744] (--) AT Translated Set 2 keyboard: Found keys
[ 37.744] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 37.744] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD)
[ 37.744] (**) Option "xkb_rules" "evdev"
[ 37.744] (**) Option "xkb_model" "logitech_base"
[ 37.744] (**) Option "xkb_layout" "fr"
[ 37.744] (**) Option "xkb_options" "lv3:ralt_switch"
[ 37.744] (II) config/udev: Adding input device PC Speaker
(/dev/input/event4)
[ 37.744] (II) No input driver/identifier specified (ignoring)
[ 660.356] (EE) intel(0): Failed to submit batch buffer, expect rendering
corruption or even a frozen display: Device or resource busy.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=logitech_base
E: XKBLAYOUT=fr
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=System manufacturer
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2
N: input/event2
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=logitech_base
E: XKBLAYOUT=fr
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=System manufacturer
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/event1
N: input/event1
S: input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB-PS_2_Optical_Mouse
E: ID_MODEL_ENC=USB-PS\x2f2\x20Optical\x20Mouse
E: ID_MODEL_ID=c044
E: ID_REVISION=2720
E: ID_SERIAL=Logitech_USB-PS_2_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB-PS_2_Optical_Mouse
E: ID_MODEL_ENC=USB-PS\x2f2\x20Optical\x20Mouse
E: ID_MODEL_ID=c044
E: ID_REVISION=2720
E: ID_SERIAL=Logitech_USB-PS_2_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-mouse
/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-mouse
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=logitech_base
E: XKBLAYOUT=fr
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=System manufacturer
P: /devices/platform/pcspkr/input/input4/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=System manufacturer
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
[ 1.009073] Linux agpgart interface v0.103
[ 1.009290] agpgart-intel 0000:00:00.0: Intel 946GZ Chipset
[ 1.009453] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total,
262144K mappable
[ 1.010419] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.010634] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 7.134538] [drm] Initialized drm 1.1.0 20060810
[ 7.906383] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.906445] [drm] Driver supports precise vblank timestamp query.
[ 7.915895] [drm] initialized overlay support
[ 8.022663] fb0: inteldrmfb frame buffer device
[ 8.022696] drm: registered panic notifier
[ 8.022979] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 662.848011] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed...
GPU hung
[ 662.894488] [drm:init_ring_common] *ERROR* render ring initialization failed
ctl 00000000 head 00000000 tail 00000000 start 00000000
-- System Information:
Debian Release: wheezy/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'oldstable'), (500, 'unstable'),
(500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.38-1-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.11.2-11 Embedded GNU C Library: Shared lib
ii libdrm-intel1 2.4.23-3 Userspace interface to intel-speci
ii libdrm2 2.4.23-3 Userspace interface to kernel DRM
ii libpciaccess0 0.12.1-1 Generic PCI access library for X
ii libudev0 167-1 libudev shared library
ii libx11-6 2:1.4.2-1 X11 client-side library
ii libx11-xcb1 2:1.4.2-1 Xlib/XCB interface library
ii libxcb-aux0 0.3.6-1 utility libraries for X C Binding
ii libxcb-dri2-0 1.7-2 X C Binding, dri2 extension
ii libxcb1 1.7-2 X C Binding
ii libxext6 2:1.2.0-2 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.5-1 X11 miscellaneous 'fixes' extensio
ii libxv1 2:1.0.6-1 X11 Video extension library
ii libxvmc1 2:1.0.6-1 X11 Video extension library
ii xserver-xorg-core [xorg-video 2:1.9.5-1 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
On Wed, Oct 5, 2011 at 17:56:12 +0200, Frédéric Massot wrote:
> Le 25/09/2011 12:49, Julien Cristau a écrit :
> >tag 622873 moreinfo kthxbye
> >
> >On Fri, Apr 15, 2011 at 14:56:51 +0200, Frederic MASSOT wrote:
> >
> >>Package: xserver-xorg-video-intel Version: 2:2.14.0-4 Severity:
> >>important
> >>
> >>
> >>Hi,
> >>
> >>After a dist-upgrade of my Wheezy desktop, xserver-xorg is updating
> >>from 1:7.5+8 to 1:7.6+6, xserver-xorg-core from 2:1.7.7-13 to
> >>2:1.9.5-1, xserver-xorg-video-intel from 2:2.13.0-6 to 2:2.14.0-4
> >>and all the xorg packages are update, I restarted my Gnome session
> >>and I have a white screen striped with horizontal black lines. Xorg
> >>does not work, the graphic is unusable, only the consoles
> >>(ctrl-alt-F2) operate.
> >>
> >>Before this update, Intel drivers, Xorg and KMS are working
> >>properly with good resolution.
> >>
> >Is this still an issue with an updated kernel and X stack (linux 3.0
> >or 3.1, X 1.11, intel 2.16, mesa 7.11)?
>
> Hi,
>
> I don't know, May 6 I updated from version 2:2.13.0-6 to version
> 2:2.15.0-1 without problems.
>
> Today I use xserver-xorg-video-intel 2:2.15.0-3, xserver-xorg-core
> 2:1.10.4-1, mesa 7.11-5 and kernel 3.0 without any problems.
>
OK, calling this one fixed then. Thanks.
Cheers,
Julien
--- End Message ---
