-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
On 02/26/11 12:42 PM, Cyril Brulebois wrote:
> Hi,
>
> Morten Gulbrandsen <lordby...@aim.com> (25/02/2010):
>> but the second attempt to install from this CD failed, IIRC. I think
>> because the network binaries have changed since then. Again I wiped
>> all partitions out and performed a clean fresh install.
>>
>> I'd first like to rule out any possible hardware malfunction.
>
> could you please tell us how it goes, now that squeeze is released?
>
> We have documentation there:
> http://pkg-xorg.alioth.debian.org/
>
> KiBi.
Yes,
For my amd server I have downloaded the netinstall iso, but not yet
installed, will do this asap,
debian-6.0.0-i386-netinst.iso
debian-6.0.0-amd64-netinst.iso
For my iMac ppc I have tried with latest ubuntu, no worry I will not
switch to ubuntu, after some initial warnings, ubuntu started the xserver
===
live video=ofonly
__!__
Ubuntu is running in low graphics mode
The following error was encountered. You may need
to update your configuration to solve this.
(EE) unable to find a valid framebuffer device
(EE) R128(0): failed to open framebuffer device,
consult warnings and/or errors above for possible reasons
(EE) Screen(s) found, but none have a usable configuration
__OK__
===
but there was some issues after this one, I selected the low graphics
mode and ubuntu 10.04 LTS (long term Support) now runs.
ToDo for morten:
I will go for this one
http://www.debian.org/distrib/netinst#smallcd
http://cdimage.debian.org/debian-cd/6.0.0/powerpc/iso-cd/debian-6.0.0-powerpc-netinst.iso
ls -l debian-6.0.0-powerpc-netinst.iso
- -rw-r--r-- 1 morten staff 246382592 2011-02-05 15:42
debian-6.0.0-powerpc-netinst.iso
ls -lh debian-6.0.0-powerpc-netinst.iso
- -rw-r--r-- 1 morten staff 235M 2011-02-05 15:42
debian-6.0.0-powerpc-netinst.iso
cksum debian-6.0.0-powerpc-netinst.iso
4033546711 246382592 debian-6.0.0-powerpc-netinst.iso
md5sum debian-6.0.0-powerpc-netinst.iso
cd6b280a2f3290479b2bcf761f264f15 debian-6.0.0-powerpc-netinst.iso
sha1sum debian-6.0.0-powerpc-netinst.iso
afffbd680a83a32e106e20cad514b2f88cb86cae debian-6.0.0-powerpc-netinst.iso
for troubleshooting I will be able to try with ubuntu,
My targeted systems are debian and NetBSD for macppc.
on Ubuntu now, I can see as attached. Gnome works, gui runs, firefox
runs, ftp server runs, exept the framebuffer annoyances, it seems to be
a stable and in good health piece of macppc hardware.
I have not sendt any of these to the ubuntu team, I hope we could reach
this far with debian.
The following files are hereby attached;
ls -l ubuntu.*
- -rw-r--r-- 1 morten staff 21080 2011-02-28 18:25 ubuntu.dmesg.ubuntu.txt
- -rw-r--r-- 1 morten staff 923 2011-02-28 18:26 ubuntu.ifconfig-a.txt
- -rw-r--r-- 1 morten staff 3656 2011-02-28 18:26 ubuntu.lspci-vvv.txt
- -rw-r--r-- 1 morten staff 532 2011-02-28 18:26 ubuntu.lspci.txt
- -rw-r--r-- 1 morten staff 93 2011-02-28 18:26
ubuntu.uname-a.notes.ubuntu.macppc.txt
- -rw-r--r-- 1 morten staff 8421 2011-02-28 18:26 ubuntu.Xorg.5.log
Sincerely yours,
藻留天 具留部覧度船
Morten Gulbrandsen
_____________________________________________________________________
Java programmer, C++ programmer
CAcert Assurer, GSWoT introducer,
Gossamer Spider Web of Trust http://www.gswot.org
Please consider the environment before printing this e-mail!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (SunOS)
Comment: For keyID and its URL see the OpenPGP message header
iEYEAREKAAYFAk1r5BQACgkQ9ymv2YGAKVS3RACghpIirSWzz0Fc4++YLF19pNyD
6ucAoLO7vI63c/P6YS4kJIvt2esasOxj
=xwbg
-----END PGP SIGNATURE-----
eth0 Link encap:Ethernet HWaddr 00:0a:27:b2:5f:7c
inet addr:192.168.0.148 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20a:27ff:feb2:5f7c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:121 errors:0 dropped:0 overruns:0 frame:0
TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24892 (24.8 KB) TX bytes:4816 (4.8 KB)
Interrupt:41 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:720 (720.0 B) TX bytes:720 (720.0 B)
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-24-powerpc64-smp ppc Ubuntu
Current Operating System: Linux morten-desktop 2.6.32-28-powerpc #55-Ubuntu Mon
Jan 10 21:20:02 UTC 2011 ppc
Kernel command line: root=/dev/hda3 ro quiet splash video=ofonly
Build Date: 10 December 2010 06:31:47PM
xorg-server 2:1.7.6-2ubuntu7.5 (For technical support please see
http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.5.log", Time: Mon Feb 28 17:39:30 2011
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x101ebbe4
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:0:16:0) 1002:524c:1002:524c ATI Technologies Inc Rage 128 RL/VR
AGP rev 0, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256,
BIOS @ 0x????????/131072
(II) Open APM successful
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched fbdev as autoconfigured driver 1
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 6.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 6.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:10:0
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(II) R128(0): PCI bus 0 card 16 func 0
(II) R128(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(**) R128(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Reloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(WW) open /dev/fb1: No such file or directory
(WW) open /dev/fb2: No such file or directory
(WW) open /dev/fb3: No such file or directory
(WW) open /dev/fb4: No such file or directory
(WW) open /dev/fb5: No such file or directory
(WW) open /dev/fb6: No such file or directory
(WW) open /dev/fb7: No such file or directory
(EE) Unable to find a valid framebuffer device
(EE) R128(0): Failed to open framebuffer device, consult warnings and/or errors
above for possible reasons
(you may have to look at the server log to see warnings)
(II) UnloadModule: "r128"
(II) UnloadModule: "fbdevhw"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.5.log" for additional
information.
ddxSigGiveUp: Closing log
Linux morten-desktop 2.6.32-28-powerpc #55-Ubuntu Mon Jan 10 21:20:02 UTC 2011
ppc GNU/Linux
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
Kernel modules: uninorth-agp
0000:00:10.0 Display controller: ATI Technologies Inc Rage 128 RL/VR AGP
Subsystem: ATI Technologies Inc Rage 128 RL/VR AGP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 0400 [disabled] [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 90020000 [disabled] [size=128K]
Capabilities: <access denied>
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Kernel modules: uninorth-agp
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Kernel modules: uninorth-agp
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5000000 [disabled] [size=1M]
Kernel driver in use: gem
Kernel modules: sungem
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
0000:00:10.0 Display controller: ATI Technologies Inc Rage 128 RL/VR AGP
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 02)
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM)
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 512MB; using 1024kB for hash table (at cff00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.32-28-powerpc (buildd@ross) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu Mon Jan 10 21:20:02 UTC 2011 (Ubuntu
2.6.32-28.55-powerpc 2.6.32.27+drm33.12)
[ 0.000000] Found initrd at 0xc1d00000:0xc258e000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000
revision: 0x03
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Keylargo mac-io controller, rev: 2, mapped at 0xff740000
[ 0.000000] PowerMac motherboard: iMac FireWire
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware
bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff ->
0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff ->
0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware
bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff ->
0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff ->
0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware
bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff ->
0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=660, gen1=659
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x210
[ 0.000000] nvram: XP partition at 0x1220
[ 0.000000] nvram: NR partition at 0x1320
[ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00020000
[ 0.000000] Normal 0x00020000 -> 0x00020000
[ 0.000000] HighMem 0x00020000 -> 0x00020000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00020000
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0751bdc, node_mem_map
c07e9000
[ 0.000000] DMA zone: 1024 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 130048 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 130048
[ 0.000000] Kernel command line: root=/dev/hda3 ro quiet splash video=ofonly
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] High memory: 0k
[ 0.000000] Memory: 501248k/524288k available (7284k kernel code, 22496k
reserved, 276k data, 486k bss, 340k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffef000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdf32000..0xff800000 : early ioremap
[ 0.000000] * 0xe1000000..0xfdf32000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max
4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 120 minutes, DST: on
[ 0.000000] time_init: decrementer frequency = 24.967326 MHz
[ 0.000000] time_init: processor frequency = 350.000000 MHz
[ 0.000000] clocksource: timebase mult[a0359a6] shift[22] registered
[ 0.000000] clockevent: decrementer mult[6644238] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000349] Security Framework initialized
[ 0.000500] AppArmor: AppArmor initialized
[ 0.000539] Mount-cache hash table entries: 512
[ 0.001353] device-tree: Duplicate name in /cpus/PowerPC,750@0, renamed to
"l2-cache#1"
[ 0.005377] Initializing cgroup subsys ns
[ 0.005404] Initializing cgroup subsys devices
[ 0.005420] Initializing cgroup subsys freezer
[ 0.005435] Initializing cgroup subsys net_cls
[ 0.005509] ftrace: allocating 17670 entries in 52 pages
[ 0.024915] devtmpfs: initialized
[ 0.026828] regulator: core version 0.5
[ 0.027165] NET: Registered protocol family 16
[ 0.028157] irq: irq 42 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.028264] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.028287] channel 0 bus <multibus>
[ 0.028299] channel 1 bus <multibus>
[ 0.028356] irq: irq 26 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.028409] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.028427] channel 0 bus <multibus>
[ 0.028473] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000
[ 0.028487] channel 1 bus <multibus>
[ 0.028499] channel 2 bus <multibus>
[ 0.028591] irq: irq 25 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.028660] irq: irq 47 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.028946] PCI: Probing PCI hardware
[ 0.029330] pci 0000:00:10.0: reg 10 32bit mmio pref: [0x94000000-0x97ffffff]
[ 0.029357] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
[ 0.029379] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x90003fff]
[ 0.029415] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90020000-0x9003ffff]
[ 0.029465] pci 0000:00:10.0: supports D1
[ 0.029590] irq: irq 48 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.030154] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.030243] pci 0001:10:18.0: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.030330] pci 0001:10:19.0: reg 10 32bit mmio: [0x80080000-0x80080fff]
[ 0.030470] irq: irq 27 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.030533] irq: irq 28 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.031410] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.031454] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5000000-0xf50fffff]
[ 0.031573] irq: irq 41 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.031992] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
[ 0.032033] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.032051] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.032069] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
[ 0.032087] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.032105] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.032123] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.032141] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.032160] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.036469] bio: create slab <bio-0> at 0
[ 0.037360] vgaarb: loaded
[ 0.038099] SCSI subsystem initialized
[ 0.038460] libata version 3.00 loaded.
[ 0.039041] usbcore: registered new interface driver usbfs
[ 0.039141] usbcore: registered new interface driver hub
[ 0.039376] usbcore: registered new device driver usb
[ 0.040286] NetLabel: Initializing
[ 0.040305] NetLabel: domain hash size = 128
[ 0.040316] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.040405] NetLabel: unlabeled traffic allowed by default
[ 0.040428] Switching to clocksource timebase
[ 0.050395] AppArmor: AppArmor Filesystem Enabled
[ 0.051720] NET: Registered protocol family 2
[ 0.052180] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.053627] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.054582] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.055068] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.055086] TCP reno registered
[ 0.055452] NET: Registered protocol family 1
[ 0.055991] Thermal assist unit using timers, shrink_timer: 500 jiffies
[ 0.057227] audit: initializing netlink socket (disabled)
[ 0.057315] type=2000 audit(1298903941.040:1): initialized
[ 0.093338] Trying to unpack rootfs image as initramfs...
[ 0.152640] VFS: Disk quotas dquot_6.5.2
[ 0.153174] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.155415] fuse init (API version 7.13)
[ 0.156098] msgmni has been set to 980
[ 0.169185] alg: No test for stdrng (krng)
[ 0.169593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.169617] io scheduler noop registered
[ 0.169629] io scheduler anticipatory registered
[ 0.169642] io scheduler deadline registered
[ 0.169962] io scheduler cfq registered (default)
[ 0.186754] Generic non-volatile memory driver v1.1
[ 0.187187] Using unsupported 1024x768 ATY,Rage128k at 94008000, depth=8,
pitch=1024
[ 0.204409] Console: switching to colour frame buffer device 128x48
[ 0.220663] fb0: Open Firmware frame buffer device on
/pci@f0000000/ATY,Rage128k@10
[ 0.269191] brd: module loaded
[ 0.269403] MacIO PCI driver attached to Keylargo chipset
[ 0.270154] irq: irq 24 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 0.270205] irq: irq 9 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 0.270246] irq: irq 10 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 0.270500] irq: irq 32 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 0.271029] irq: irq 19 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 0.271074] irq: irq 11 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 0.271285] irq: irq 20 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 0.271329] irq: irq 12 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 0.271541] irq: irq 21 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.271585] irq: irq 13 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.271796] irq: irq 22 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 0.271841] irq: irq 5 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 0.271881] irq: irq 6 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31
[ 0.272146] irq: irq 50 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 50
[ 0.272191] irq: irq 7 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 33
[ 0.272232] irq: irq 8 on host
/pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 34
[ 0.277799] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.278817] Uniform Multi-Platform E-IDE driver
[ 0.281022] adb: starting probe task...
[ 0.281061] adb: finished probe task...
[ 1.296956] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID
2, irq 19
[ 1.297074] Probing IDE interface ide0...
[ 1.318293] Freeing initrd memory: 8760k freed
[ 1.584855] hda: Maxtor 6E040L0, ATA DISK drive
[ 2.088486] hdb: MATSHITA CR-1750, ATAPI CD/DVD-ROM drive
[ 2.088813] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.089005] hda: host side 80-wire cable detection failed, limiting max
speed to UDMA33
[ 2.089025] hda: UDMA/33 mode selected
[ 2.089176] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.089293] hdb: MWDMA2 mode selected
[ 2.089508] ide0 at 0xe1026000-0xe1026070,0xe1026160 on irq 19
[ 3.108508] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID
0, irq 20
[ 3.108582] Probing IDE interface ide1...
[ 3.676710] ide1 at 0xe1030000-0xe1030070,0xe1030160 on irq 20
[ 4.696502] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID
1, irq 22
[ 4.696560] Probing IDE interface ide2...
[ 5.264702] ide2 at 0xe1038000-0xe1038070,0xe1038160 on irq 22
[ 5.264818] ide-gd driver 1.18
[ 5.264943] hda: max request size: 128KiB
[ 5.292731] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63
[ 5.292980] hda: cache flushes supported
[ 5.293371] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6
[ 5.305540] ide-cd driver 5.00
[ 5.306550] ide-cd: hdb: ATAPI 24X CD-ROM drive, 128kB Cache
[ 5.306583] Uniform CD-ROM driver Revision: 3.20
[ 5.317791] Fixed MDIO Bus: probed
[ 5.317838] tun: Universal TUN/TAP device driver, 1.6
[ 5.317851] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 5.318374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.318522] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.318681] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
[ 5.318755] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 5.319006] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus
number 1
[ 5.319141] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[ 5.392397] usb usb1: configuration #1 chosen from 1 choice
[ 5.392661] hub 1-0:1.0: USB hub found
[ 5.392745] hub 1-0:1.0: 2 ports detected
[ 5.393039] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
[ 5.393094] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 5.393405] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus
number 2
[ 5.393504] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[ 5.468269] usb usb2: configuration #1 chosen from 1 choice
[ 5.468507] hub 2-0:1.0: USB hub found
[ 5.468584] hub 2-0:1.0: 2 ports detected
[ 5.468856] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.469958] mice: PS/2 mouse device common for all mice
[ 5.470284] PowerMac i2c bus pmu 2 registered
[ 5.470413] PowerMac i2c bus pmu 1 registered
[ 5.470536] PowerMac i2c bus mac-io 0 registered
[ 5.470660] PowerMac i2c bus uni-n 1 registered
[ 5.470834] PowerMac i2c bus uni-n 0 registered
[ 5.471408] device-mapper: uevent: version 1.0.3
[ 5.472236] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 5.474567] TCP cubic registered
[ 5.474591] NET: Registered protocol family 17
[ 5.475315] registered taskstats version 1
[ 5.476070] input: PMU as /devices/virtual/input/input1
[ 5.476131] /build/buildd/linux-2.6.32/drivers/rtc/hctosys.c: unable to open
rtc device (rtc0)
[ 5.476221] Freeing unused kernel memory: 340k init
[ 5.624385] udev: starting version 151
[ 5.768712] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 5.979212] usb 1-1: configuration #1 chosen from 1 choice
[ 5.980261] hub 1-1:1.0: USB hub found
[ 5.983013] hub 1-1:1.0: 3 ports detected
[ 6.168858] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 6.370229] usb 2-1: configuration #1 chosen from 1 choice
[ 6.372219] hub 2-1:1.0: USB hub found
[ 6.373619] hub 2-1:1.0: 4 ports detected
[ 6.466802] usb 1-1.1: new low speed USB device using ohci_hcd and address 3
[ 6.583263] usb 1-1.1: configuration #1 chosen from 1 choice
[ 6.660230] sungem.c:v0.98 8/24/03 David S. Miller (da...@redhat.com)
[ 6.680629] usb 1-1.2: new low speed USB device using ohci_hcd and address 4
[ 6.796459] usb 1-1.2: configuration #1 chosen from 1 choice
[ 6.849963] PHY ID: 406212, addr: 0
[ 6.852240] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:27:b2:5f:7c
[ 6.852262] eth0: Found BCM5201 PHY
[ 6.973642] usb 2-1.4: new full speed USB device using ohci_hcd and address 3
[ 6.984106] usbcore: registered new interface driver hiddev
[ 6.997118] input: Alps Electric Apple USB Keyboard as
/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 6.998025] generic-usb 0003:05AC:0202.0001: input,hidraw0: USB HID v1.00
Keyboard [Alps Electric Apple USB Keyboard] on usb-0001:10:18.0-1.1/input0
[ 7.007124] input: Mitsumi Apple USB Mouse as
/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
[ 7.008277] generic-usb 0003:05AC:0301.0002: input,hidraw1: USB HID v1.00
Mouse [Mitsumi Apple USB Mouse] on usb-0001:10:18.0-1.2/input0
[ 7.008643] usbcore: registered new interface driver usbhid
[ 7.012614] usbhid: v2.6:USB HID core driver
[ 7.089150] usb 2-1.4: configuration #1 chosen from 1 choice
[ 7.105575] input: Sun USB Keyboard as
/devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
[ 7.106424] generic-usb 0003:0430:00A2.0003: input,hidraw2: USB HID v1.10
Keyboard [Sun USB Keyboard] on usb-0001:10:19.0-1.4/input0
[ 7.298032] EXT4-fs (hda3): mounted filesystem with ordered data mode
[ 9.248731] eth0: Link is up at 100 Mbps, full-duplex.
[ 15.684547] Adding 1492984k swap on /dev/hda4. Priority:-1 extents:1
across:1492984k
[ 16.130104] udev: starting version 151
[ 17.790142] Linux agpgart interface v0.103
[ 18.173031] agpgart-uninorth 0000:00:0b.0: Apple UniNorth chipset
[ 18.175677] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 18.216684] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 18.445049] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<b...@kernel.crashing.org>)
[ 18.445231] pmac_zilog: i2c-modem detected, id: 1
[ 18.445399] ttyPZ0 at MMIO 0x80013020 (irq = 29) is a Z85c30 ESCC - Internal
modem
[ 18.460645] ttyPZ1 at MMIO 0x80013000 (irq = 50) is a Z85c30 ESCC - Serial
port
[ 18.495359] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 18.923660] type=1505 audit(1298903959.903:2): operation="profile_load"
pid=379 name="/sbin/dhclient3"
[ 18.972653] type=1505 audit(1298903959.955:3): operation="profile_load"
pid=379 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 18.993909] type=1505 audit(1298903959.975:4): operation="profile_load"
pid=379 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.839402] type=1505 audit(1298903962.819:5): operation="profile_load"
pid=533 name="/usr/share/gdm/guest-session/Xsession"
[ 21.954973] type=1505 audit(1298903962.935:6): operation="profile_replace"
pid=536 name="/sbin/dhclient3"
[ 21.992330] type=1505 audit(1298903962.971:7): operation="profile_replace"
pid=536 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 22.001896] type=1505 audit(1298903962.983:8): operation="profile_replace"
pid=536 name="/usr/lib/connman/scripts/dhclient-script"
[ 22.579693] eth0: Link is up at 100 Mbps, full-duplex.
[ 22.579722] eth0: Pause is disabled
[ 22.584654] type=1505 audit(1298903963.567:9): operation="profile_load"
pid=541 name="/usr/bin/evince"
[ 22.756075] type=1505 audit(1298903963.735:10): operation="profile_load"
pid=541 name="/usr/bin/evince-previewer"
[ 22.909311] type=1505 audit(1298903963.891:11): operation="profile_load"
pid=541 name="/usr/bin/evince-thumbnailer"
[ 24.404549] input: PowerMac Beep as
/devices/pci0001:10/0001:10:17.0/input/input5
[ 24.774482] apm_emu: PMU APM Emulation initialized.
[ 25.425379] vgaarb: this pci device is not a vga device
[ 25.882167] NET: Registered protocol family 10
[ 25.884371] lo: Disabled Privacy Extensions
[ 26.648562] hda: host max PIO4 wanted PIO0 selected PIO0
[ 27.091244] vgaarb: this pci device is not a vga device
[ 27.804222] vgaarb: this pci device is not a vga device
[ 28.521652] vgaarb: this pci device is not a vga device
[ 29.422926] lp: driver loaded but no devices found
[ 29.582462] ppdev: user-space parallel port driver
[ 30.602935] vgaarb: this pci device is not a vga device
[ 31.643194] vgaarb: this pci device is not a vga device
[ 32.500983] vgaarb: this pci device is not a vga device
[ 32.509106] vgaarb: this pci device is not a vga device
[ 36.564497] eth0: no IPv6 routers present
[ 137.420578] vgaarb: this pci device is not a vga device
[ 137.429123] vgaarb: this pci device is not a vga device
