.gitignore | 76 ++
COPYING | 72 --
ChangeLog | 1259 ++++++++++++++++++++++++++++++++++++++++++++-
Makefile.am | 12
configure.ac | 59 +-
debian/README.source | 24
debian/changelog | 71 ++
debian/compat | 2
debian/control | 43 -
debian/rules | 119 ----
debian/xsfbs/repack.sh | 32 -
debian/xsfbs/xsfbs.mk | 285 ----------
debian/xsfbs/xsfbs.sh | 622 ----------------------
include/Makefile.am | 1
include/evdev-properties.h | 2
man/Makefile.am | 68 --
man/evdev.man | 40 -
src/Makefile.am | 6
src/draglock.c | 4
src/emuMB.c | 37 -
src/emuWheel.c | 26
src/evdev.c | 1148 ++++++++++++++++++++++-------------------
src/evdev.h | 30 -
23 files changed, 2196 insertions(+), 1842 deletions(-)
New commits:
commit 8bc8c9cdd3c7d3f478067c2e773a403c661fd7ff
Author: Cyril Brulebois <k...@debian.org>
Date: Sat Feb 5 14:38:02 2011 +0100
Upload to unstable
diff --git a/debian/changelog b/debian/changelog
index fa36265..a56f98c 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
+xserver-xorg-input-evdev (1:2.6.0-2) unstable; urgency=low
* Get rid of “[linux-any]” for the dependency on udev-udeb, evdev is
Linux-only.
@@ -21,7 +21,7 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
* Bump Standards-Version to 3.9.1 (no changes needed).
* Wrap Depends/Provides.
- -- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
+ -- Cyril Brulebois <k...@debian.org> Sat, 05 Feb 2011 14:38:02 +0100
xserver-xorg-input-evdev (1:2.6.0-1) experimental; urgency=low
commit e2071f1c2f2650d6a68019a8266c223e94a071ca
Author: Cyril Brulebois <k...@debian.org>
Date: Fri Feb 4 11:39:27 2011 +0100
Fix sequence ordering.
Since both the autoreconf and quilt sequences insert a command before
dh_auto_configure, it is important that we use the quilt one in the first
place, so that autoreconf is run on a patched tree. Ditto for dh_clean.
diff --git a/debian/rules b/debian/rules
index 63d3106..3d192dc 100755
--- a/debian/rules
+++ b/debian/rules
@@ -14,4 +14,4 @@ override_dh_shlibdeps:
dh_shlibdeps -- --warnings=6
%:
- dh $@ --with autoreconf,quilt,xsf --builddirectory=build/
+ dh $@ --with quilt,autoreconf,xsf --builddirectory=build/
commit f45135c71209127b0f66901b56be26ad23c1e952
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 06:55:07 2011 +0100
Ensure installation under debian/tmp.
This is not strictly needed since there are several binaries built from this
source package, so debhelper uses debian/tmp rather than debian/$package.
But let's make all drivers use a similar debian/rules file. Also, a binary
package might be dropped at some point.
diff --git a/debian/rules b/debian/rules
index d2aad39..63d3106 100755
--- a/debian/rules
+++ b/debian/rules
@@ -1,5 +1,9 @@
#!/usr/bin/make -f
+# Install in debian/tmp to retain control through dh_install:
+override_dh_auto_install:
+ dh_auto_install --destdir=debian/tmp
+
# Kill *.la files, and forget no-one:
override_dh_install:
find debian/tmp -name '*.la' -delete
commit 001a682996e9c0ab181a7ae90a9ae577ed21826f
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 02:11:29 2011 +0100
Wrap Depends/Provides.
diff --git a/debian/changelog b/debian/changelog
index e2036a0..fa36265 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -19,6 +19,7 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
- dpkg-dev is recent enough on stable and higher.
- automake and libtool are pulled through dh-autoreconf.
* Bump Standards-Version to 3.9.1 (no changes needed).
+ * Wrap Depends/Provides.
-- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
diff --git a/debian/control b/debian/control
index 3d01cdc..f45858a 100644
--- a/debian/control
+++ b/debian/control
@@ -21,8 +21,12 @@ Vcs-Browser:
http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-input-evdev.g
Package: xserver-xorg-input-evdev
Architecture: linux-any
-Depends: ${shlibs:Depends}, ${misc:Depends}, ${xinpdriver:Depends},
-Provides: ${xinpdriver:Provides}
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+ ${xinpdriver:Depends},
+Provides:
+ ${xinpdriver:Provides}
Description: X.Org X server -- evdev input driver
This package provides the driver for input devices using evdev, the Linux
kernel's event delivery mechanism. This driver allows for multiple keyboards
@@ -37,16 +41,22 @@ Package: xserver-xorg-input-evdev-udeb
XC-Package-Type: udeb
Section: debian-installer
Architecture: linux-any
-Depends: ${shlibs:Depends}, ${misc:Depends}, ${xinpdriver:Depends},
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+ ${xinpdriver:Depends},
udev-udeb,
-Provides: ${xinpdriver:Provides}
+Provides:
+ ${xinpdriver:Provides}
Description: X.Org X server -- evdev input driver
This is a udeb, or a microdeb, for the debian-installer.
Package: xserver-xorg-input-evdev-dev
Section: libdevel
Architecture: all
-Depends: ${shlibs:Depends}, ${misc:Depends}
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends}
Description: X.Org X server -- evdev input driver (development headers)
This package provides the development headers for the evdev input driver
found in xserver-xorg-input-evdev. Non-developers likely have little use
commit aad3fe619626237be8f7126312707112b3d60851
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 02:09:52 2011 +0100
Remove “[linux-any]” for udev-udeb.
Really do what I said in a57cd487ef5bc3b944adbf6bb6d8a47c10d5701d
diff --git a/debian/control b/debian/control
index edb53f6..3d01cdc 100644
--- a/debian/control
+++ b/debian/control
@@ -38,7 +38,7 @@ XC-Package-Type: udeb
Section: debian-installer
Architecture: linux-any
Depends: ${shlibs:Depends}, ${misc:Depends}, ${xinpdriver:Depends},
- udev-udeb [linux-any],
+ udev-udeb,
Provides: ${xinpdriver:Provides}
Description: X.Org X server -- evdev input driver
This is a udeb, or a microdeb, for the debian-installer.
commit 290236913513c5bc8b9eeb3b0e22a910f7449a13
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 02:07:39 2011 +0100
Bump Standards-Version to 3.9.1 (no changes needed).
diff --git a/debian/changelog b/debian/changelog
index a859aac..e2036a0 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -18,6 +18,7 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
* Remove build-deps:
- dpkg-dev is recent enough on stable and higher.
- automake and libtool are pulled through dh-autoreconf.
+ * Bump Standards-Version to 3.9.1 (no changes needed).
-- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
diff --git a/debian/control b/debian/control
index 4dc7077..edb53f6 100644
--- a/debian/control
+++ b/debian/control
@@ -15,7 +15,7 @@ Build-Depends:
x11proto-kb-dev,
libxkbfile-dev,
xutils-dev (>= 1:7.5+4),
-Standards-Version: 3.8.4
+Standards-Version: 3.9.1
Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-input-evdev
Vcs-Browser:
http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-input-evdev.git
commit 62bd5e409bc701d1785302460d71a21ed87da850
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 02:07:03 2011 +0100
Remove unneeded build-deps.
diff --git a/debian/changelog b/debian/changelog
index 85eb743..a859aac 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -15,6 +15,9 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
* Replace ${xserver:Depends} with ${xinpdriver:Depends} in the udeb.
* Remove long obsolete Replaces.
* Update Uploaders list. Thanks, David & Brice!
+ * Remove build-deps:
+ - dpkg-dev is recent enough on stable and higher.
+ - automake and libtool are pulled through dh-autoreconf.
-- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
diff --git a/debian/control b/debian/control
index df2b622..4dc7077 100644
--- a/debian/control
+++ b/debian/control
@@ -14,10 +14,7 @@ Build-Depends:
x11proto-input-dev,
x11proto-kb-dev,
libxkbfile-dev,
- dpkg-dev (>= 1.14.17),
- automake,
- libtool,
- xutils-dev (>= 1:7.5+4)
+ xutils-dev (>= 1:7.5+4),
Standards-Version: 3.8.4
Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-input-evdev
Vcs-Browser:
http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-input-evdev.git
commit 7e79c0c0faafd2cc73b5efb6b1ad0cb699637e40
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 02:04:10 2011 +0100
Update Uploaders list. Thanks, David & Brice!
diff --git a/debian/changelog b/debian/changelog
index a2259e8..85eb743 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -14,6 +14,7 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
* Remove xsfbs accordingly.
* Replace ${xserver:Depends} with ${xinpdriver:Depends} in the udeb.
* Remove long obsolete Replaces.
+ * Update Uploaders list. Thanks, David & Brice!
-- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
diff --git a/debian/control b/debian/control
index c8363c6..df2b622 100644
--- a/debian/control
+++ b/debian/control
@@ -2,7 +2,7 @@ Source: xserver-xorg-input-evdev
Section: x11
Priority: optional
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
-Uploaders: David Nusinow <dnusi...@debian.org>, Drew Parsons
<dpars...@debian.org>, Brice Goglin <bgog...@debian.org>, Cyril Brulebois
<k...@debian.org>
+Uploaders: Drew Parsons <dpars...@debian.org>, Cyril Brulebois
<k...@debian.org>
Build-Depends:
debhelper (>= 8),
dh-autoreconf,
commit c6425cf6f3d4f568a474e6f45f4c65d978651049
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 02:01:47 2011 +0100
Remove long obsolete Replaces.
diff --git a/debian/changelog b/debian/changelog
index d59d262..a2259e8 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -13,6 +13,7 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
* Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf sequence.
* Remove xsfbs accordingly.
* Replace ${xserver:Depends} with ${xinpdriver:Depends} in the udeb.
+ * Remove long obsolete Replaces.
-- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
diff --git a/debian/control b/debian/control
index 405bd78..c8363c6 100644
--- a/debian/control
+++ b/debian/control
@@ -26,7 +26,6 @@ Package: xserver-xorg-input-evdev
Architecture: linux-any
Depends: ${shlibs:Depends}, ${misc:Depends}, ${xinpdriver:Depends},
Provides: ${xinpdriver:Provides}
-Replaces: xserver-xorg (<< 6.8.2-35)
Description: X.Org X server -- evdev input driver
This package provides the driver for input devices using evdev, the Linux
kernel's event delivery mechanism. This driver allows for multiple keyboards
commit 37db72b87d10fc4433c9503c66e6279579fd92d3
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 01:54:13 2011 +0100
Replace ${xserver:Depends} with ${xinpdriver:Depends} in the udeb.
diff --git a/debian/changelog b/debian/changelog
index 8149cc9..d59d262 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -12,6 +12,7 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
- Stop passing --disable-static to configure, that's the default.
* Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf sequence.
* Remove xsfbs accordingly.
+ * Replace ${xserver:Depends} with ${xinpdriver:Depends} in the udeb.
-- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
diff --git a/debian/control b/debian/control
index 4b05cf7..405bd78 100644
--- a/debian/control
+++ b/debian/control
@@ -41,7 +41,7 @@ Package: xserver-xorg-input-evdev-udeb
XC-Package-Type: udeb
Section: debian-installer
Architecture: linux-any
-Depends: ${shlibs:Depends}, ${misc:Depends}, ${xserver:Depends},
+Depends: ${shlibs:Depends}, ${misc:Depends}, ${xinpdriver:Depends},
udev-udeb [linux-any],
Provides: ${xinpdriver:Provides}
Description: X.Org X server -- evdev input driver
commit 20e69f1101af91fbab07600c155122df7fd5997b
Author: Cyril Brulebois <k...@debian.org>
Date: Thu Feb 3 01:52:19 2011 +0100
Remove xsfbs accordingly.
diff --git a/debian/README.source b/debian/README.source
index b09a1ab..4ecd5e6 100644
--- a/debian/README.source
+++ b/debian/README.source
@@ -47,27 +47,3 @@ are involved:
case, it appears directly in the .diff.gz.
* Otherwise, the patch is added to debian/patches/ which is managed
with quilt as documented in /usr/share/doc/quilt/README.source.
-
-quilt is actually invoked by the Debian X packaging through a larger
-set of scripts called XSFBS. XSFBS brings some other X specific
-features such as managing dependencies and conflicts due to the video
-and input driver ABIs.
-XSFBS itself is maintained in a separate repository at
- git://git.debian.org/pkg-xorg/xsfbs.git
-and it is pulled inside the other Debian X repositories when needed.
-
-The XSFBS patching system requires a build dependency on quilt. Also
-a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
-so that the XSFBS patching occurs before the actual build. So the
-very first target of the build (likely the one running autoreconf)
-should depend on $(STAMP_DIR)/patch. It should also not depend on
-anything so that parallel builds are correctly supported (nothing
-should probably run while patching is being done). And finally, the
-clean target should depend on the xsfclean target so that patches
-are unapplied on clean.
-
-When the upstream sources contain some DFSG-nonfree files, they are
-listed in text files in debian/prune/ in the "debian-*" branch of
-the Debian repository. XSFBS' scripts then take care of removing
-these listed files during the build so as to generate a modified
-DFSG-free .orig.tar.gz tarball.
diff --git a/debian/changelog b/debian/changelog
index 21413ae..8149cc9 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -11,6 +11,7 @@ xserver-xorg-input-evdev (1:2.6.0-2) UNRELEASED; urgency=low
- Pass --fail-missing to dh_install.
- Stop passing --disable-static to configure, that's the default.
* Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf sequence.
+ * Remove xsfbs accordingly.
-- Cyril Brulebois <k...@debian.org> Wed, 02 Feb 2011 05:44:06 +0100
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
deleted file mode 100755
index 5935cc9..0000000
--- a/debian/xsfbs/repack.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
- exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
- exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
- exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
deleted file mode 100755
index 3c59c20..0000000
--- a/debian/xsfbs/xsfbs.mk
+++ /dev/null
@@ -1,285 +0,0 @@
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1...@debian.org>
-# Modified by Mark W. Eichin <eic...@kitten.gen.ma.us>
-# Modified by Adam Heath <doo...@debian.org>
-# Modified by Branden Robinson <bran...@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbi...@fabbione.net>
-# Modified by David Nusinow <dnusi...@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat
/etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the codename of a release in the Debian part of the
-# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo
$${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*"
>/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation
policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
- ARCH:=$(ARCH)
- else
- ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-# 1) A target name that is invoked by a package-building tool or the user.
-# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-# 2) A line delcaring 1) as a phony target (".PHONY:").
-# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-# depend on other targets.
-# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-# "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir". Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again. Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
- mkdir $(STAMP_DIR)
- >$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/logdir $(STAMP_DIR)/genscripts
- >$@
-
-.PHONY: logdir
-stampdir_targets+=logdir
-logdir: $(STAMP_DIR)/logdir
-$(STAMP_DIR)/logdir: $(STAMP_DIR)/stampdir
- mkdir -p $(STAMP_DIR)/log
- >$@
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
- if ! [ `which quilt` ]; then \
- echo "Couldn't find quilt. Please install it or add it to the
build-depends for this package."; \
- exit 1; \
- fi; \
- if $(QUILT) next >/dev/null 2>&1; then \
- echo -n "Applying patches..."; \
- if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
- cat $(STAMP_DIR)/log/patch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/patch; \
- echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "No patches to apply"; \
- fi; \
- >$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/logdir
- rm -f $(STAMP_DIR)/patch
- @echo -n "Unapplying patches..."; \
- if $(QUILT) applied >/dev/null 2>/dev/null; then \
- if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "nothing to do."; \
- fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
- rm -f $(STAMP_DIR)/genscripts
- rm -f debian/*.config \
- debian/*.postinst \
- debian/*.postrm \
- debian/*.preinst \
- debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
- dh_testdir
- rm -rf .pc
- rm -rf $(STAMP_DIR)
- dh_clean
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems. It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
- # Ensure we're in the correct directory.
- dh_testdir
- grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
- @echo -n "Auditing patches..."; \
- >$(STAMP_DIR)/log/patch; \
- FUZZY=; \
- while [ -n "$$($(QUILT) next)" ]; do \
- RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep
^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
- case "$$RESULT" in \
- succeeded) \
- echo "fuzzy patch: $$($(QUILT) top)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
- FUZZY=yes; \
- ;; \
- FAILED) \
- echo "broken patch: $$($(QUILT) next)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
- exit 1; \
- ;; \
- esac; \
- done; \
- if [ -n "$$FUZZY" ]; then \
- echo "there were fuzzy patches; please fix."; \
- exit 1; \
- else \
- echo "done."; \
- fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
- for FILE in debian/*.config.in \
- debian/*.postinst.in \
- debian/*.postrm.in \
- debian/*.preinst.in \
- debian/*.prerm.in; do \
- if [ -e "$$FILE" ]; then \
- MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
- sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
- cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
- sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
- sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
- -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
- <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
- rm $$MAINTSCRIPT.tmp; \
- fi; \
- done
- # Validate syntax of generated shell scripts.
- #sh debian/scripts/validate-posix-sh debian/*.config \
- # debian/*.postinst \
- # debian/*.postrm \
- # debian/*.preinst \
- # debian/*.prerm
- >$@
-
-# Compute dependencies for drivers
-#
-VIDEODEP = $(shell cat /usr/share/xserver-xorg/videodrvdep 2>/dev/null)
-INPUTDEP = $(shell cat /usr/share/xserver-xorg/xinputdep 2>/dev/null)
-
-# these two can be removed post-squeeze
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI), xorg-driver-video
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI), xorg-driver-input
-
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(VIDEODEP),)
- @echo 'error: xserver-xorg-dev >= 1.7.6.901 needs to be installed'
- @exit 1
-else
- echo "xviddriver:Depends=$(VIDEODEP)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Depends=$(INPUTDEP)" >> debian/$(PACKAGE).substvars
- # the following is there for compatibility...
- echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >>
debian/$(PACKAGE).substvars
- echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >>
debian/$(PACKAGE).substvars
- echo "xserver:Depends=$(VIDEODEP), $(INPUTDEP)" >>
debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
deleted file mode 100644
index 813fd8d..0000000
--- a/debian/xsfbs/xsfbs.sh
+++ /dev/null
@@ -1,622 +0,0 @@
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts. It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper
operation
-# of those functions. By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
- DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
- DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
- RECONFIGURE="true"
-else
- RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
- FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
- UPGRADE="yes"
-fi
-
-trap "message;\
- message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT
script.\";\
- message;\
- exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
- # syntax: reject_nondigits [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted)
for
- # characters other than decimal digits and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain anything but digits?
- if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- # can't use die(), because it wraps message() which wraps this function
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-reject_unlikely_path_chars () {
- # syntax: reject_unlikely_path_chars [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted)
for
- # characters unlikely to be seen in a path and which the shell might
- # interpret and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain any funny characters?
- if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
- "encountered possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user. This is used only as a fallback in the
-# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- DEFCOLUMNS=80
-fi
-
-message () {
- # pretty-print messages of arbitrary length
- reject_nondigits "$COLUMNS"
- echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
- # syntax: observe message ...
- #
- # issue observational message suitable for logging someday when support for
- # it exists in dpkg
- if [ -n "$DEBUG_XORG_PACKAGE" ]; then
- message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
- fi
-}
-
-warn () {
- # syntax: warn message ...
- #
- # issue warning message suitable for logging someday when support for
- # it exists in dpkg; also send to standard error
- message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
- # syntax: die message ...
- #
- # exit script with error message
- message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
- exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
- # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
- message "internal error: $*"
- if [ -n "$OFFICIAL_BUILD" ]; then
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug"
\
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for"
\
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of"
\
- "the same name to file a report."
- fi
- exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
- message "usage error: $*"
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- exit $SHELL_LIB_USAGE_ERROR
-}
-
-font_update () {
- # run $UPDATECMDS in $FONTDIRS
-
- local dir cmd shortcmd x_font_dir_prefix
-
- x_font_dir_prefix="/usr/share/fonts/X11"
-
- if [ -z "$UPDATECMDS" ]; then
- usage_error "font_update() called but \$UPDATECMDS not set"
- fi
- if [ -z "$FONTDIRS" ]; then
- usage_error "font_update() called but \$FONTDIRS not set"
- fi
-
- reject_unlikely_path_chars "$UPDATECMDS"
- reject_unlikely_path_chars "$FONTDIRS"
-
- for dir in $FONTDIRS; do
- if [ -d "$x_font_dir_prefix/$dir" ]; then
- for cmd in $UPDATECMDS; do
- if which "$cmd" > /dev/null 2>&1; then
- shortcmd=${cmd##*/}
- observe "running $shortcmd in $dir font directory"
- cmd_opts=
- if [ "$shortcmd" = "update-fonts-alias" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-dir" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-scale" ]; then
- cmd_opts=--x11r7-layout
- fi
- $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
- "failed; font directory data may not" \
- "be up to date"
- else
- warn "$cmd not found; not updating corresponding $dir font" \
- "directory data"
- fi
- done
- else
- warn "$dir is not a directory; not updating font directory data"
- fi
- done
-}
-
-remove_conffile_prepare () {
- # syntax: remove_conffile_prepare filename official_md5sum ...
- #
- # Check a conffile "filename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 2 ]; then
- usage_error "remove_conffile_prepare() called with wrong number of" \
- "arguments; expected at least 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
- shift
-
- # does the conffile even exist?
- if [ -e "$conffile" ]; then
- # calculate its checksum
- current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
- # compare it to each supplied checksum
- while [ -n "$1" ]; do
- if [ "$current_checksum" = "$1" ]; then
- # we found a match; move the confffile and stop looking
- observe "preparing obsolete conffile $conffile for removal"
- mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/e1plikg-0006is...@alioth.debian.org
