--- Begin Message ---
Package: xserver-xorg
Version: 1:7.4+4
Severity: wishlist
I'm calling this wishlist because I've eventually managed to get X
working again; it's essentially a documentation issue.
As NEWS.Debian says, "devices configured in xorg.conf to use the
mouse or kbd driver are ignored by the X server by default." I'm
meant to switch over to HAL and evdev. That's all very well for you
kids with your shiny twentyfirst-century laptops, but unfortunately,
this old machine has no PS/2 ports. It uses an AT-port keyboard
(which evdev is happy to recognise as an input device) and a serial
mouse (which is apparently ignored).
I don't see any mention of this issue in the docs, so I thought I'd
better report it and the workaround I'm using. The xorg.conf below
gets X to work as normal again with a minimum of complaining -
though it also requires HAL to be disabled via an "exit 0" at the
top of the init.d script. In principle there's probably some
alternative involving writing appropriate custom .fdi files, but if
I could work out how to do that sort of thing I'd be busy using my
mutant psychic powers to fight superpowered criminals like the rest
of you X-developers! HAL has no discernible reason for being
present on this box, so I'm just nobbling it.
Note that just disabling HAL and AutoAddDevices wasn't enough - I've
had to put lots more lines back in my xorg.conf that I'd previously
been leaving to the defaults. Many thanks for providing
/usr/share/doc/xserver-xorg/examples/xorg.conf!
If it has been decided that xorg no longer supports serial mice,
that's fine; just make sure the announcement gets into the Squeeze
release notes. Otherwise, please document somewhere the approved
method for keeping them working - the obvious place would be a
NEWS.Debian file for xserver-xorg-input-mouse.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2009-08-10 17:18 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1689976 2009-08-06 17:55 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 05)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1072 2009-09-16 14:55 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
#<jbr> comments like -*- sh -*-
# cf: /usr/share/doc/xserver-xorg/examples/xorg.conf
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "AutoEnableDevices" "False"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/ttyS0"
Option "Protocol" "MouseMan"
EndSection
Section "Device"
Identifier "Video Card"
Option "UseFBDev" "False"
EndSection
Section "Monitor"
Identifier "Monitor"
HorizSync 30-82
VertRefresh 30-100
EndSection
Section "Screen"
Identifier "Screen"
Device "Video Card"
Monitor "Monitor"
SubSection "Display"
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Layout"
Screen "Screen"
InputDevice "Keyboard"
InputDevice "Mouse"
EndSection
#</jbr>
Xorg X server log files on system:
-rw-r----- 1 root adm 30175 2009-09-16 14:54 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian
Current Operating System: Linux xan 2.6.30.custom #1 Sun Aug 16 16:07:03 BST
2009 i586
Build Date: 06 August 2009 04:49:57PM
xorg-server 2:1.6.3-1+b1 (bui...@murphy.debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 16 14:47:02 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout"
(**) |-->Screen "Screen" (0)
(**) | |-->Monitor "Monitor"
(**) | |-->Device "Video Card"
(**) |-->Input Device "Keyboard"
(**) |-->Input Device "Mouse"
(**) Option "AutoAddDevices" "False"
(**) Option "AutoEnableDevices" "False"
(**) Not automatically adding devices
(**) Not automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 6
(--) PCI:*(0:1:0:0) 102b:0525:102b:3693 Matrox Graphics, Inc. MGA G400/G450 rev
5, Mem @ 0xd4000000/33554432, 0xd6000000/16384, 0xd7000000/8388608, BIOS @
0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched mga for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 1.6.2.901, module version = 1.4.11
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 eW Nuvoton, mgag400, mgag550
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(--) MGA(0): Chipset: "mgag400" (G400)
(--) MGA(0): Linear framebuffer at 0xD4000000
(--) MGA(0): MMIO registers at 0xD6000000
(--) MGA(0): Pseudo-DMA transfer window at 0xD7000000
(==) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(**) MGA(0): Option "UseFBDev" "False"
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using HW cursor
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(==) MGA(0): VideoRAM: 16384 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:E-EDID segment register" registered at address
0x60.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(--) MGA(0): No DDC signal
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) MGA(0): initializing int10
(II) MGA(0): Primary V_BIOS segment is: 0xc000
(II) MGA(0): VESA BIOS detected
(II) MGA(0): VESA VBE Version 3.0
(II) MGA(0): VESA VBE Total Mem: 16384 kB
(II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
(II) MGA(0): VESA VBE OEM Software Rev: 2.1
(II) MGA(0): VESA VBE OEM Vendor: Matrox
(II) MGA(0): VESA VBE OEM Product: Matrox G400
(II) MGA(0): VESA VBE OEM Product Rev: 00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) MGA(0): VESA VBE DDC supported
(II) MGA(0): VESA VBE DDC Level none
(II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) MGA(0): VESA VBE DDC read failed
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 300 MHz
(II) MGA(0): Monitor: Using hsync range of 30.00-82.00 kHz
(II) MGA(0): Monitor: Using vrefresh range of 30.00-100.00 Hz
(II) MGA(0): Clock range: 17.75 to 300.00 MHz
(II) MGA(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced
blanking)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (monitor doesn't support
reduced blanking)
(II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1080" (monitor doesn't support
reduced blanking)
(II) MGA(0): Not using default mode "1920x1200" (monitor doesn't support
reduced blanking)
(II) MGA(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1360x768" (width too large for virtual
size)
(--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
(**) MGA(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync (80.0 kHz)
(**) MGA(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772
808 +hsync +vsync (68.7 kHz)
(**) MGA(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(**) MGA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964
1000 +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "1152x864": 121.5 MHz, 77.5 kHz, 85.1 Hz
(II) MGA(0): Modeline "1152x864"x85.1 121.50 1152 1216 1344 1568 864 865 868
911 +hsync -vsync (77.5 kHz)
(**) MGA(0): Default mode "1152x864": 119.7 MHz, 77.1 kHz, 85.0 Hz
(II) MGA(0): Modeline "1152x864"x85.0 119.65 1152 1224 1352 1552 864 865 868
907 -hsync +vsync (77.1 kHz)
(**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868
900 +hsync +vsync (67.5 kHz)
(**) MGA(0): Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868
902 -hsync +vsync (67.6 kHz)
(**) MGA(0): Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
(II) MGA(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868
900 -hsync +vsync (63.0 kHz)
(**) MGA(0): Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868
895 -hsync +vsync (53.7 kHz)
(**) MGA(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777
806 -hsync -vsync (56.5 kHz)
(**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync (48.4 kHz)
(**) MGA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) MGA(0): Modeline "1024x768"x86.9 44.90 1024 1032 1208 1264 768 768 776
817 interlace +hsync +vsync (35.5 kHz)
(**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667
-hsync -vsync (49.7 kHz)
(**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631
+hsync +vsync (53.7 kHz)
(**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync (46.9 kHz)
(**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666
+hsync +vsync (48.1 kHz)
(**) MGA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) MGA(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625
doublescan +hsync +vsync (81.2 kHz)
(**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625
doublescan +hsync +vsync (75.0 kHz)
(**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync (35.2 kHz)
(**) MGA(0): Default mode "840x525": 93.5 MHz, 82.3 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "840x525"x75.0 93.50 840 900 988 1136 525 526 529 549
doublescan -hsync +vsync (82.3 kHz)
(**) MGA(0): Default mode "840x525": 87.0 MHz, 76.6 kHz, 69.9 Hz (D)
(II) MGA(0): Modeline "840x525"x69.9 87.00 840 900 988 1136 525 526 529 548
doublescan -hsync +vsync (76.6 kHz)
(**) MGA(0): Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544
doublescan -hsync +vsync (65.3 kHz)
(**) MGA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) MGA(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545
doublescan +hsync +vsync (81.5 kHz)
(**) MGA(0): Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "700x525"x70.1 72.53 700 748 824 948 525 525 527 546
doublescan -hsync +vsync (76.5 kHz)
(**) MGA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541
doublescan +hsync +vsync (64.9 kHz)
(**) MGA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533
doublescan +hsync +vsync (80.0 kHz)
(**) MGA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533
doublescan +hsync +vsync (64.0 kHz)
(**) MGA(0): Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) MGA(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467
doublescan -hsync +vsync (55.9 kHz)
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(**) MGA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500
doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(**) MGA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446
-hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395
doublescan +hsync -vsync (47.4 kHz)
(**) MGA(0): Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399
doublescan -hsync +vsync (47.7 kHz)
(**) MGA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445
-hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "576x432": 60.8 MHz, 77.5 kHz, 85.2 Hz (D)
(II) MGA(0): Modeline "576x432"x85.2 60.75 576 608 672 784 432 432 434 455
doublescan +hsync -vsync (77.5 kHz)
(**) MGA(0): Default mode "576x432": 59.8 MHz, 77.1 kHz, 85.1 Hz (D)
(II) MGA(0): Modeline "576x432"x85.1 59.83 576 612 676 776 432 432 434 453
doublescan -hsync +vsync (77.1 kHz)
(**) MGA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450
doublescan +hsync +vsync (67.5 kHz)
(**) MGA(0): Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432"x75.0 52.49 576 612 676 776 432 432 434 451
doublescan -hsync +vsync (67.6 kHz)
(**) MGA(0): Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
(II) MGA(0): Modeline "576x432"x70.0 48.38 576 612 672 768 432 432 434 450
doublescan -hsync +vsync (63.0 kHz)
(**) MGA(0): Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447
doublescan -hsync +vsync (53.7 kHz)
(**) MGA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445
+hsync -vsync (37.9 kHz)
(**) MGA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404
doublescan +hsync +vsync (68.7 kHz)
(**) MGA(0): Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400
doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403
doublescan -hsync -vsync (56.5 kHz)
(**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403
doublescan -hsync -vsync (48.4 kHz)
(**) MGA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) MGA(0): Modeline "512x384"x86.6 22.45 512 516 604 632 384 384 388 409
interlace doublescan +hsync +vsync (35.5 kHz)
(**) MGA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MGA(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333
doublescan -hsync -vsync (49.7 kHz)
(**) MGA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315
doublescan +hsync +vsync (53.7 kHz)
(**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312
doublescan +hsync +vsync (46.9 kHz)
(**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333
doublescan +hsync +vsync (48.1 kHz)
(**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314
doublescan +hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312
doublescan +hsync +vsync (35.2 kHz)
(**) MGA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) MGA(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254
doublescan -hsync -vsync (43.3 kHz)
(**) MGA(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200 202 223
doublescan -hsync +vsync (37.9 kHz)
(++) MGA(0): DPI set to (100, 100)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 32 depth: 24
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
(II) MGA(0): [drm] framebuffer handle = 0xd4000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): X context handle = 0x1
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1280,1227)
(II) MGA(0): Largest offscreen area available: 1280 x 203
(II) MGA(0): Reserved back buffer at offset 0x600000
(II) MGA(0): Reserved depth buffer at offset 0xb00000
(II) MGA(0): Reserved 0 kb for textures at offset 0x1000000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
10 128x128 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(II) MGA(0): [drm] dma control initialized, using IRQ 12
(II) MGA(0): Direct rendering enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: Loaded and initialized /usr/lib/dri/mga_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
(**) Option "Protocol" "MouseMan"
(**) Mouse: Device: "/dev/ttyS0"
(**) Mouse: Protocol: "MouseMan"
(**) Mouse: always reports core events
(**) Option "Device" "/dev/ttyS0"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse: ZAxisMapping: buttons 4 and 5
(**) Mouse: Buttons: 9
(**) Mouse: Sensitivity: 1
(**) Mouse: BaudRate: 1200
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
(**) Mouse: (accel) keeping acceleration scheme 1
(**) Mouse: (accel) filter chain progression: 2.00
(**) Mouse: (accel) filter stage 0: 20.00 ms
(**) Mouse: (accel) set acceleration profile 0
(EE) config/hal: couldn't initialise context: unknown error (null)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) UnloadModule: "kbd"
(II) UnloadModule: "mouse"
(II) MGA(0): [drm] removed 1 reserved context for kernel
(II) MGA(0): [drm] unmapping 8192 bytes of SAREA 0xd086f000 at 0xb7a80000
(II) MGA(0): [drm] Closed DRM master.
HAL Information (lshal):
# cut'n'pasted in from a run with HAL temporarily restarted
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys',
'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
(string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
(string)
input.device = '/dev/input/event1' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'gb' (string)
input.xkb.model = 'pc105' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input1/event1' (string)
DRM Information from dmesg:
matroxfb: Matrox G400 (AGP) detected
Linux agpgart interface v0.103
agpgart-ali 0000:00:00.0: ALi M1541 chipset
agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized mga 3.2.1 20051102 for 0000:01:00.0 on minor 0
agpgart-ali 0000:00:00.0: AGP 1.0 bridge
agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode
matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.
agpgart-ali 0000:00:00.0: AGP 1.0 bridge
agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode
matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.
agpgart-ali 0000:00:00.0: AGP 1.0 bridge
agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode
matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.
agpgart-ali 0000:00:00.0: AGP 1.0 bridge
agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode
matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.
agpgart-ali 0000:00:00.0: AGP 1.0 bridge
agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode
matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.
agpgart-ali 0000:00:00.0: AGP 1.0 bridge
agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode
matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (50, 'unstable')
Architecture: i386 (i586)
Kernel: Linux 2.6.30.custom
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii console-setup 1.44 console font and keymap setup prog
ii hal 0.5.13-3 Hardware Abstraction Layer
ii libc6 2.9-25 GNU C Library: Shared libraries
ii x11-xkb-utils 7.4+3 X11 XKB utilities
ii xkb-data 1.6-1 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.6.3-1+b1 Xorg X server - core server
ii xserver-xorg-input-evdev 1:2.2.5-1 X.Org X server -- evdev input driv
ii xserver-xorg-input-kbd [ 1:1.3.2-4 X.Org X server -- keyboard input d
ii xserver-xorg-input-mouse 1:1.4.0-4 X.Org X server -- mouse input driv
ii xserver-xorg-video-mga [ 1:1.4.11.dfsg-1 X.Org X server -- MGA display driv
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.5.1-1 A free implementation of the OpenG
ii udev 0.141-2 /dev/ and hotplug management daemo
xserver-xorg suggests no packages.
-- debconf-show failed
--
JBR For trifling occasions it is better to accomplish things
simply by yelling - _Hagakure_, Yamamoto Tsunetomo (1716)
--- End Message ---
signature.asc
