New branch 'upstream-experimental' available with the following commits:
commit 1a9495a74c41d956751177807602383ce4549c37
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Wed Sep 1 09:04:11 2010 +1000
synaptics 1.3.0
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 33632e447b311950729350e5802b5b1ee9616677
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Mon Aug 23 15:12:05 2010 +1000
man: use seconds² instead of seconds per second
Makes it hopefully slightly less confusing. Should have been amended before
the push but ENOTENOUGHCOFFEE.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 7a741ddedab477baea21f3d8ce6390b7bf72399f
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Mon Aug 23 11:55:45 2010 +1000
synaptics 1.2.99.901
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 59151a548dcbac6f68e4f921b5c47aea4e5bc2a3
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Fri Aug 20 11:09:04 2010 +1000
Enable coasting by default with a value of 20.
The default value for friction coasting makes coasting much more useful now
since it stops coasting after a while. Enable it by default, the man page
already claims a default of 20 anyway.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 56655fd15f676fea143f3963e23b464b275b2e77
Author: Patrick Curran <pjcur...@wisc.edu>
Date: Fri Jul 23 17:28:01 2010 -0500
Added "friction physics" so coasting can stop on its own.
When you are coasting (but not corner coasting) you might want the
scrolling to slow down and stop on its own. This also lets you
start coasting while using a two finger scroll.
Signed-off-by: Patrick Curran <pjcur...@wisc.edu>
Reviewed-by: Peter Hutterer <peter.hutte...@who-t.net>
Tested-by: Peter Hutterer <peter.hutte...@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit a6ca4d2523904b7ce49edc29ba408979bdf0d45e
Author: Chris Bagwell <ch...@cnpbagwell.com>
Date: Wed Aug 18 22:09:45 2010 -0500
Reset X/Y hist on multi finger transition to fix jumps
Most modern touchpads track 1st finger during multi-touch. If first finger
is lifted then a jump will occur as X/Y transition to next finger location.
Resetting X/Y history as each finger is lifted will hide this transition.
Synaptics hw specs claim older hardware report X/Y values that are average
point between multi-fingers which can cause unwanted jump. Reset X/Y
history during transition to new fingers to hide this as well.
Signed-off-by: Chris Bagwell <ch...@cnpbagwell.com>
Tested-by: Peter Hutterer <peter.hutte...@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit b774a1dba2f1f45c94fe898fe8b5ce258cbcddfc
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu Aug 19 14:25:29 2010 +1000
Increase the default acceleration factor.
With 4e0e53fcba6fd99d458df1905d055d63360155c0 the driver got it's own
acceleration mechanism. This slowed down the pointer movement a lot,
especially on ALPS touchpads. Increase the default acceleration factor to
accommodate for this.
The number itself is chosen through guesswork and informal tests.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Tested-by: Magnus Kessler <magnus.kess...@gmx.net>
Reviewed-by: Magnus Kessler <magnus.kess...@gmx.net>
commit 4b0003c3d4cee1f5c6675bde5701e2169959932a
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu Aug 19 14:22:03 2010 +1000
Up the precision of MaxSpeed and AccelFactor log output.
MaxSpeed usually has two decimals that matter, AccelFactor doesn't get
intersting until the second decimal, so print 3.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 7acdbb7cf95299fda29d6bea691af925f5182749
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Aug 17 11:34:32 2010 +1000
synclient: don't print "missing" if a property doesn't exist.
Virtually all touchpads still in use have one or more properties missing
anyway. If it's not in the list, then it's missing.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit abb448a253cb0b3003038fbaa1daa9494c396e8f
Author: Chris Bagwell <ch...@cnpbagwell.com>
Date: Wed Jul 7 21:35:22 2010 -0500
Align EmulateTwoFinger* docs to current behavior.
This corrects man page to mention EmulateTwoFingerMinW
and EmulateTwoFingerMinZ are considered together. Old
man page read like driver would emulate two-finger even
if only pressure OR width (but not both) were supported.
Next, add note to align man page with patch that defaults
to enabling two-finger emulation on hardware that does not
support two-finger detection but does support pressure and
width detection.
Signed-off-by: Chris Bagwell <ch...@cnpbagwell.com>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit ffa6dc2809734a6aaa690e9133d6761480603a68
Author: Chris Bagwell <ch...@cnpbagwell.com>
Date: Thu Jul 1 20:09:43 2010 -0500
Default to 2-finger emulation when HW supports it
Ideally, emulating 2-fingers should just work on hardware
were it can be supported. This patch is to do that.
Currently, emulateTwoFingerMinW defaults to 7. Most kernel
drivers do not support reporting finger width and so can't get above
MinW of 7. Synaptics devices hardcode width value to 5 when
hardware doesn't support width and 7 is a good threshold to detect
2 fingers on hardware that does. bcm7954 are only other devices
that report width and they support reporting DOUBLETAP and wouldn't
need emulation anyways.
emulateTwoFingerMinZ defaulted to a really high value so never
let Synaptics devices to emulate 2-fingers by default.
Changed default to a low value (same as FingerHigh) when hardware
doesn't support DOUBLETAP and supports width so emulations
will now work by default in all the right cases.
I'm working to get kernel to stop reporting ABS_TOOL_WIDTH unless
hardware really supports it. If that would have been behavior
in first place then we could also default to 2-finger scrolling as
well. Since its not reliable, we should continue defaulting to
side scrolling.
Config GUI's will want to now allow switching between 2-finger and edge
scrolling when new property indicates width is supported. GUI's should
also update the above MinZ and MinW's to values similar to our defaults.
Signed-off-by: Chris Bagwell <ch...@cnpbagwell.com>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit e2a247a76e21d9c0be7d537dbfc18df9f3b812fa
Author: Chris Bagwell <ch...@cnpbagwell.com>
Date: Wed Jul 7 21:00:19 2010 -0500
Document Capabilities property additions in man
Documents has_pressure and has_width additions.
Signed-off-by: Chris Bagwell <ch...@cnpbagwell.com>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 75459b1c0bb85ce0bbeb4270114edddb30ff3b1b
Author: Chris Bagwell <ch...@cnpbagwell.com>
Date: Mon Jul 19 19:30:14 2010 -0500
Expose width support in capabilites properity.
Some properties are only valid with hardware supports
width. Namely, *MinW properties. Config GUI's may
wish to disable/grey out options related to width support.
This combined with pressure property is good indication when
2 finger scrolling can be supported using emulation.
Signed-off-by: Chris Bagwell <ch...@cnpbagwell.com>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 51e9bb815812469f39ad47f723d842bf1893a109
Author: Chris Bagwell <ch...@cnpbagwell.com>
Date: Wed Jul 7 20:40:52 2010 -0500
Expose pressure support in capabilities property.
Some properties are only valid when hardware supports
pressure. For example, the *MinZ and *MaxZ options.
Config GUI's may wish to disable/grey out config
options related to pressure since not all hardware supports
it. This will allow for that.
Also, change setting of priv->has_pressure to boolean
value so its value will always fit in 8-bit that
properities report.
Signed-off-by: Chris Bagwell <ch...@cnpbagwell.com>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit cc9d34155297a85fb214d76d4fc45f26cf41f5f3
Author: Chris Bagwell <ch...@cnpbagwell.com>
Date: Thu Jul 15 21:44:03 2010 -0500
Make default checks for x, y, w, and p separate.
Some input devices will not return any ranges and
current code seems geared towards those. It assumed
if invalid X/Y ranges then that was only case for invalid
W and Pressure.
Synaptics kernel drivers have been returning valid
X/Y/Z values but invalid 0/0 values for P.
Split up checks to allow setting defaults for any combination
of unspecified or invalid values.
I also think there was a bug in older code. It seemed odd
it was checking minx > maxx but miny < maxy. I changed both
to ">=" so that it also catches kernel reports of 0/0 and
logically invalid ranges (i.e. 6/6 or 9/1).
Signed-off-by: Chris Bagwell <ch...@cnpbagwell.com>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit df9b639cef416ce694aa0be1592f99a41a0ea554
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Wed Jun 23 09:53:02 2010 +1000
Remove one leftover xcalloc.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 3e9753f09699a40b33dadb1739949d2cd6c48611
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu Jun 17 11:17:41 2010 +1000
Bump to 1.2.99.1.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit b19e3782a77c171ca20fc962f95923495fdb7978
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu Jun 17 11:23:15 2010 +1000
Purge GuestMouse support.
Guest mouse dates back to quite a while ago, hasn't been tested for ages and
the current synaptics interface guide claims the bit that we used to check
if guestmouse is available is "reserved for future use. The host should
ignore the values of reserved bits when reading the capability bits."
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 2c8ba519471cf1a4d0ab0f2cac61359426eaa0c7
Merge: bef44f0 22a2c7f
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu Jun 17 11:15:44 2010 +1000
Merge branch 'master' of
git+ssh://git.freedesktop.org/git/xorg/driver/xf86-input-synaptics
commit bef44f01603e1a337b9dc08b5dd37664f9237bab
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Wed Jun 16 10:35:20 2010 +1000
synclient: allow Min|MaxSpeed values of > 1.0.
With the new accel mechanisms, the old ranges don't apply anymore.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit a3c38206ed242040c4cbb79377490d8dfa48d5ac
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 16:03:41 2010 +1000
Require server 1.6 or later.
Remove ifdef's for server ABIs up to including server 1.5. Driver still
supports 1.6, 1.7, 1.8 and the upcoming 1.9.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit fe15f60ef2742f9fb9dffe2bc1f4bcd2f296b37b
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 15:09:53 2010 +1000
Re-use width/height variables.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 832dfd03bb3eb6b8291aba2b70fd0faf2e1976a5
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 15:06:34 2010 +1000
Reshuffle default value initialization.
No functional changes, just code structure. The eventcomm backened is the
only one with a real probe function right now. So provide a default query
proc that reads the touchpad coordinates in. The values provided are the
ones that then will give us the right edge settings in concordance with the
default we had before.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 22a2c7feb18a18a700a736c3f4a65951dbebe990
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Fri Jun 11 14:22:06 2010 -0400
config: add comment regarding MAN_SUBSTS variable usage
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 078bad1582d7fc9a77e00d131bb32bf9d69d2a42
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 15:01:16 2010 +1000
Move some defines to where they belong.
These defines aren't used by anything but the ps2comm interface.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit 7b97f9869983a47678188d0df1a209ffc35150db
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 14:24:05 2010 +1000
Support percent values for area.
AreaTopEdge and the other three can be specified as either an absolute
value, or as a percent of the matching dimension.
Option "AreaBottomEdge" "80%" will thus set the bottom edge of the input
area to 80% of the height of the touchpad, with the lower 20% being the dead
area.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit 8b3717055ab5c8d52bf5aae13e996ab4e86c2794
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 13:57:11 2010 +1000
man: don't call it "synaptics" touchpad driver.
Under Linux the kernel handles everything, so these days synaptics is the
generic touchpad driver for anything that the kernel can handle. There
aren't many synaptics-specific bits in the driver anymore.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit 857d579de808a95e3c8541847ec8a8845ca57c73
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 13:54:16 2010 +1000
man: note where the Area options fit in.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit f42fa446c4c0a2de92c1b5320dc8dcd0c18907e5
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 13:48:46 2010 +1000
man: move area description down to CONFIGURATION DETAILS section.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit 78df6c5da2792a333a7aac899329517032f2f2f8
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 13:46:54 2010 +1000
man: divide up man page with a few subheaders.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit 1f2b54cd57e88b706b6b2874547eabd1a8ab0963
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 10:16:38 2010 +1000
man: update SHMConfig documentation, it's only useful for debugging now.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit 69097acf352464a04ca315c80f7cf855f8656ede
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue Jun 15 10:49:17 2010 +1000
Don't allow anything but relative mode.
We did this before already anyway, make it official and return an error to
the client as appropriate. Touchpads in absolute mode are somewhat useless.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Fernando Carrijo <fcarr...@yahoo.com.br>
commit f07e1e1cbe199721f99c027843facf4e55172fa2
Author: Simon Thum <simon.t...@gmx.de>
Date: Tue Feb 16 09:57:03 2010 +0100
Mulitply dix acceleration into synaptics maximum.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 6e346388f822e90f61b92a2344e821880876a2ea
Author: Simon Thum <simon.t...@gmx.de>
Date: Mon Feb 15 13:28:17 2010 +0100
Accel: retain para->accel scale.
In case people have modified their synaptic accel settings, it's
preferable to retain the settings scale.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 4e0e53fcba6fd99d458df1905d055d63360155c0
Author: Simon Thum <simon.t...@gmx.de>
Date: Wed Sep 9 14:41:08 2009 +0200
Setup pointer acceleration for synaptics
Setup dix pointer accel from the synaptics driver so synaptics devices
behave like before while benefiting from dix velocity approximation.
This fixes the longstanding issue with synaptics being
accelerated twice, in different layers and different algorithms.
The pressure-dependent synaptics acceleration is now performed in
the device-specific profile.
Signed-off-by: Simon Thum <simon.t...@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 3c26383af55b6b3599666cfa9693ec04aaecef02
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Mon Jun 7 11:28:42 2010 +1000
Revert "Setup pointer acceleration for synaptics"
Merged the wrong patch, right patch is the follow-up commit.
This reverts commit a489ec15eb489a3528f6fee99716f7f4ae35f9ee.
commit 144210ab4962c5b00fea4fdc4f01050841a8d67c
Merge: a489ec1 dead313
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Wed Jun 2 12:57:38 2010 +1000
Merge branch 'master' of
git://people.freedesktop.org/~gnadon/xf86-input-synaptics
commit dead313d15a7c9ccf59009eef4202503741a1b5f
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Tue Jun 1 20:55:15 2010 -0400
config: fdi file must be installed in $(datadir)/hal/fdi/policy/20thirdparty
Applies to server with no sysconfigdir
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit a489ec15eb489a3528f6fee99716f7f4ae35f9ee
Author: Simon Thum <simon.t...@gmx.de>
Date: Wed Sep 9 14:41:08 2009 +0200
Setup pointer acceleration for synaptics
Setup dix pointer accel from the synaptics driver so synaptics devices
behave like before while benefiting from dix velocity approximation.
This fixes the longstanding issue with synaptics being
accelerated twice with different algorithms. The pressure-dependent
synaptics acceleration is now performed in a device-specific profile.
Signed-off-by: Simon Thum <simon.t...@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 3dd5486bc8ddd96f43e92386537ae9adabc1714e
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Mon May 31 15:39:18 2010 -0400
config: synaptics depends on RANDR through xf86.h
The xf86.h file contains external declarations specific to RANDR
If this extension is defined (installed) synaptics will not compile
if randrproto is not installed.
Because this is an optional extension, XORG_DRIVER_CHECK_EXT
must be used.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 92789dfb8a0443d9f1dd8df4ba43c69885136574
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Fri May 28 20:16:54 2010 -0400
config: add AC_CHECK_LIB for math library functions
It ensures library is installed and sets LIBS = -lm
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit c1df54855a7eee4d904746ad7b6edc7553bda0af
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Fri May 28 13:38:35 2010 -0400
README: add standard reference links section
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 3b78018e9a0df9f0c38b63d7f4efc7dadb9ebb3e
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Fri May 28 13:32:55 2010 -0400
COPYING: add three missing authors listed in synaptics.c
Copyright (c) 2008 Fedor P. Goncharov
Copyright (c) 2002 S. Lehner
Copyright (c) 2008-2009 Red Hat, Inc.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit c4ca660b4773c6feb04a5cf64da44da1f0b2de49
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Fri May 28 13:19:11 2010 -0400
Remove unused TODO file
It has been updated just once in 4 years (300 commits)
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 9924329002276ff60c033c66dd7e39a70050c3cc
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Fri May 28 13:09:00 2010 -0400
config: use AC_PROG_INSTALL now supplied by XORG_DEFAULT_OPTIONS
It depends on util-macros 1.8
The existing statement can now be removed from the configuration file.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 100d3d60cd798ea1978adf1c7e388ee6dc5984e4
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Fri May 28 13:07:42 2010 -0400
config: upgrade to util-macros 1.8 for additional man page support
Use MAN_SUBST now supplied in XORG_MANPAGE_SECTIONS
The value of MAN_SUBST is the same for all X.Org packages.
Use AC_PROG_SED now supplied by XORG_DEFAULT_OPTIONS
The existing statement can now be removed from the configuration file.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 14fc097bc481e8dda84c4d90f8c3c97df15c6746
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Tue May 25 13:29:46 2010 -0400
config: replace Automake deprecated INCLUDES var with AM_CPPFLAGS
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 2554d5b615101011c09c4786b8a18216ec0909e2
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Tue May 25 13:00:04 2010 -0400
config: unconditionaly build synclient and syndaemon apps
The current conditional building of the apps was introduced by
commit 080caee95c46bb471d1442dcab246460cad8c7be due to optional
support properties. This is no longer an issue.
There are no longer any reason not to build these bona fide apps.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit a101621bf624466f66da41a8fa6b5ba796cd10fd
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sun May 30 21:40:01 2010 -0400
man: Use Autoconf provided $(AM_V_GEN)$(SED)
Enables silent rule and use platform appropriate version of sed.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 82c2e2d93413ec81e84cb33338e677e01aa382a9
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Mon May 24 15:53:06 2010 -0400
config: 50-synaptics.conf must be unconditionally distributed
A file may or may not be installed based on a particular system
configuration, but it must always be distributed in the tarball
so the package contains the complete source code.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit e517ccca6e7f1bd9160f2d82c10ddb618771d192
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Mon May 24 15:50:18 2010 -0400
config: use automake "dir" pattern for simplification
configdir is where the config file is installed
config_DATA is the filename
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit e4d280dfbdb2d1a916e6ad9a4cdc3f22f2c37d57
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Mon May 24 15:27:56 2010 -0400
config: close a loophole where user input means x server has a feature
If a user provides a path in --with-xorg-conf-dir,
the configuartion assumes the server does have a config path which may
not be the case.
Resolve this by testing the value of the server returned sysconfigdir
rather than the user provided value.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit f3e4c586037a5785f786ff74c89c87de7d4ac344
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sat May 22 20:48:29 2010 -0400
config: fix warnings, m4 quoting and layout
Fix some m4 quoting
Fix some autoconf warnings
Regroup statements per section
Add comments
Regroup xtst and recordproto (a prereq) flags together
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 5d64210dc613278d0b8914393cbbc3baeb4e1b76
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sat May 22 20:29:27 2010 -0400
config: Upgrade X.Org macros to 1.4 for INSTALL file copying
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 20fd08780dcf5cdc8b3d85284fe357a3c2917aed
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sat May 22 20:28:51 2010 -0400
config: remove AC_PROG_CC as it overrides AC_PROG_C_C99
XORG_STRICT_OPTION from XORG_DEFAULT_OPTIONS calls
AC_PROG_C_C99. This sets gcc with -std=gnu99.
If AC_PROG_CC macro is called afterwards, it resets CC to gcc.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 2538a6b87aad3526f85028689adc3eac21a91997
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sat May 22 20:27:10 2010 -0400
config: remove unrequired AC_HEADER_STDC
Autoconf says:
"This macro is obsolescent, as current systems have conforming
header files. New programs need not use this macro".
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 2aae5d03e336c6b1e06745410268a0c26b4a366b
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sat May 22 20:26:36 2010 -0400
config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS
Regroup AC statements at the top.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 2f81c85866448c4a07064bc6e999854f5fbcf044
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sat May 22 20:24:57 2010 -0400
config: update AC_PREREQ statement to 2.60
Unrelated to the previous patches, the new value simply reflects
the reality that the minimum level for autoconf to configure
all x.org modules is 2.60 dated June 2006.
ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit bc3c09674911b9870a3c224b0c261132d1b13cfa
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sat May 22 17:52:43 2010 -0400
config: regroup macros and variables in the backend checking
It saves a few lines.
No functional changes.
The same cannot be done for AM_CONDITIONAL:
"If AM_CONDITIONAL is run conditionally (e.g., in a shell if statement),
then the result will confuse automake".
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 8843aaf4806344a8bda0f2e981a77f61c18f8037
Author: Gaetan Nadon <mems...@videotron.ca>
Date: Sun May 30 21:19:29 2010 -0400
config: rework the synclient and syndaemon dependencies
The driver does not require inputproto package
The hunting for record.h is done only if libXtst is installed
AC_CHECK_HEADERS is used rather than checking for package versions
HAVE_PROPERTIES is no longer required
Normal config output:
checking for XI... yes
checking for XTST... yes
checking for X11/extensions/record.h... yes
Permutations of --enable-tools and dependencies:
build_tools libXi installed Result
----------- --------------- ---------
yes yes build tools
auto yes build tools
no yes skip build
yes no abort configuration
auto no warn and skip build
no no warn and skip build
Permutations of libXtst, record.h and recordproto
libXtst record.h recordproto syndaemon
installed installed installed using XRecord?
yes yes yes yes
yes no yes no
no no yes no
no yes yes no
no no no no
Other scenarios are possible where you have 2 different versions of
record.h installed in different $prefix locations. The order
of *_CFLAGS will determine which one gets picked first.
Signed-off-by: Gaetan Nadon <mems...@videotron.ca>
commit 76dd6ffee7257f9ff0aec5a9655de67f6e7973c9
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue May 25 07:36:43 2010 +1000
Bump to 1.2.99
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit a8ed3f90bf64b77ff9787c2e1c31441d254797b5
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 20 12:50:40 2010 +1000
Don't use libcwrappers for calloc and free.
The server has deprecated them now, so we get a lot of warnings for little
benefit.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Matt Turner <matts...@gmail.com>
commit 345e61fe9290d37b6309f920884a955fb62fa071
Author: Gabor Z. Papp <g...@papp.hu>
Date: Thu May 20 12:45:54 2010 +1000
Building syndaemon and synclient needs $(XI_CFLAGS) and $(AM_CFLAGS)
Reported-by: Gabor Z. Papp <g...@papp.hu>
Signed-off-by: Gabor Z. Papp <g...@papp.hu>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit f539d676607d3a7566093e2bd54edc740db20426
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Tue May 11 13:46:31 2010 +1000
Remove psmcomm.h header - superfluous.
Don't need a full header file for 3 include directives of system headers.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit c52e4a8ecd6bb535850ec6ff032f69a225734f8f
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Mon May 10 11:17:49 2010 +1000
Reshuffle to handle dead area better.
This patch makes input in the dead area essentially disappear to the client.
If a finger is detected outside the active area, it's coordinates and other
data is reset to zero. Edge detection and scrolling is skipped and the event
is not recorded in the movement history.
On touchpads that require this area, it is now possible to click the button
while leaving another finger on the touchpad.
Regression: moving into the dead area during a drag releases the drag
button.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit d79732c1ffcfa6fd1a9a39e5a1c464bba8e2afc8
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Fri May 7 13:46:49 2010 +1000
Make scrollbuttons processing and property conditional on their existence.
There are not a lot of touchpads that have extra physical scroll buttons
anymore. For those that don't have them, don't initalize the properties and
conditionalize some of the code (moved into its own functions).
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit b8776ff0b478a1645f1536872d001e9605d86f71
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 17:27:14 2010 +1000
move history storage from ComputeDeltas into HandleState.
It's well hidden in there, but not useful.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Simon Thum <simon.t...@gmx.de>
commit 69a8de8fd9f1731c83e003b6ff6495cfdc96d4e1
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 16:36:52 2010 +1000
Add NO_EDGE to the edge enum instead of using hardcoded 0.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 33b01280d8ffe6e35f6ca8497ed82bcfe2044594
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 15:22:33 2010 +1000
Rename HandleClickWithFingers to handle_clickfinger.
The option is called ClickFinger, the man page talks this way about it,
sync up
the code with it.
No functional change.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Jamey Sharp <ja...@minilop.net>
commit 1b612c0bbcd8b287ac4f7cb8ba3354b0e0a63949
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 15:21:39 2010 +1000
Factor out updating the hardware state.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Jamey Sharp <ja...@minilop.net>
commit 9076f06b1b70a92ab582ce68a73fdaa169dfe69f
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 15:10:40 2010 +1000
Use post_button_click to post doubleclicks.
Function introduced with the factoring out of post_scroll_events.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 7fd741f76a94feb21c4c8227105d174be630da11
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 15:09:33 2010 +1000
Move scroll button handling out of HandleState.
Again, just to make the code easier to read, no functional changes.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Jamey Sharp <ja...@minilop.net>
commit 39aed3b773c077a55f54a7c143102ab09dae8237
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 15:05:35 2010 +1000
When scrolling, hardcode the button/press release cycle.
Not sure why the values for !hw->up and hw->up were used here instead, but
this
could potentially lead to unreleased buttons. Also, it's harder to read and
generally confusing, since the same wasn't used for left/right scrolling.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 3782060b41ede96d87dcbc508b2235c6723f0a78
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 14:54:35 2010 +1000
Factor out up/down and left/right button scrolling from HandleState.
There are not a lot of touchpads that even have these buttons anyway, move
the
code out of the way for clarity.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Jamey Sharp <ja...@minilop.net>
commit e72c29939fa0620e831ebc99bbc69a5cadca1247
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 14:21:42 2010 +1000
Move SHM hardware state update into a separate function.
No functional changes, this is just to move a slab of code out of mind when
reading.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit e579bab2f71569ab07d6b6fd36360a81fac48ad8
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 16:58:46 2010 +1000
Change condition the finger requirement obvious.
The need for a finger down is for all conditions, move it to the front of
the condition to make it more obvious.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit a1aa196a53a9061131bcdaeac3743c1f8149ed5d
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu May 6 16:10:34 2010 +1000
Add FIXME: where does the 13 come from?
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 776ec0ed42616769ed834b5822df3b2b0d5c0e85
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu Apr 29 15:03:55 2010 +1000
Disable ClickFinger for touchpads with more than one physical button
(#26079)
If a touchpad has more than just one (or no) button, don't enable any
ClickFinger settings other than button 1.
The old default of enabling those clickfingers can be confusing on devices
that have left and right buttons but no middle. In that case, leaving three
fingers on the touchpad and clicking will result in a button 2 press
(usually paste). But leaving one or two fingers on the touchpad while
clicking will simply send button 1 events.
This can appear like spurious button 2 events to the user.
X.Org Bug 26079 <http://bugs.freedesktop.org/show_bug.cgi?id=26079>
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
commit 87b29e6004a9a7f744eb6e9c2bf9539579ecefbf
Author: Peter Hutterer <peter.hutte...@who-t.net>
Date: Thu Apr 8 14:47:08 2010 +1000
Add 50-synaptics.conf snippet.
If the server exports the sysconfigdir variable, install the
50-synaptics.conf snippet in the directory provided.
This patch also moves the fdi file from fdi/ into the new conf/ subdir to
have a single location for all config files.
Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
Reviewed-by: Dan Nicholson <dbn.li...@gmail.com>
commit e22a850e69d670152371644fc4e63976f484d7b5
Author: Peter Hutterer <peter.hutte...@who-t.net>
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/e1p7xru-0001ct...@alioth.debian.org
