On Sat, Oct 14, 2000 at 07:58:26PM +0200, Rafal Krzewski wrote:
>
> + I have 2.4.0-test8 kernel
For the latest debs I need to use at least 2.4.0-test9 for
hardware-accelerated OpenGL, and it only works with the stock XF4 mga 2D
driver (instead of the binary driver from Matrox). Also, I am using 16
bpp, but I have seen reports that you can get it to work with 24 bpp if you
tell it to use 32 bpp internally.
> - Virtual consoles do not work, if matroxfb driver is used. Works fine
> with vga 80x25 console (but who would like to use it? :))
Virtual consoles work fine for me whether or not I use kernel matroxfb.
> - When using kernel 2.4.0-test9, X server fails to start if agpgart
> module is loaded. The message is as following:
> <snip>
> (II) MGA(0): [drm] Sarea 2176+624: 2800
> (0): [drm] loaded kernel module "mga"
> (0): [drm] created "mga" driver at busid "PCI:1:0:0"
> (0): [drm] added 4096 byte SAREA at 0xc5012000
> (0): [drm] mapped SAREA 0xc5012000 to 0x4001b000
> (0): [drm] framebuffer handle = 0xd8000000
> (0): [drm] added 1 reserved context for kernel
> (EE) MGA(0): [drm] MGADRIScreenInit failed (DRM version = 2.0.1,
> expected 1.0.x). Disabling DRI.
> (0): [drm] failed to remove DRM signal handler
>
> Fatal server error:
> Caught signal 11. Server aborting
> <snip>
Right. This is why I was unable to use the binary driver from Matrox. Try
using the stock driver that comes with the debs. Unfortunately, however, I
am guessing that you won't be able to do dual-head in that case.
--
Thomas E. Vaughan <[EMAIL PROTECTED]>
CIMMS/NSSL, Norman, OK, USA
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
