Hi Adam, hi Kushal, On Dienstag, 17. November 2009, Adam Sjøgren wrote: > I've only tried on sid - but I haven't bothered trying to upgrade from > the 2.6.30 kernel yet.
Even through I'm trying to run squeeze, I'm happy and able to give anything from unstable or experimental (or other sources) a try. Probably I will also just switch to unstable on this machine, until we've made it work... > What problem did you hit? [ 1685.642108] [drm] Module unloaded [ 1692.468985] [drm] Initialized drm 1.1.0 20060810 [ 1692.524152] psb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1692.524181] psb 0000:00:02.0: setting latency timer to 64 [ 1692.524311] [drm] psb - 5.0.1.0046 [ 1692.548102] [drm:psb_do_init] *ERROR* Debug is 0x00000000 [ 1692.590187] psb 0000:00:02.0: firmware: requesting msvdx_fw.bin [ 1692.630565] [drm:psb_do_init] *ERROR* Gatt must be 256M aligned. This is a bug. [ 1692.630734] set the msvdx clock to 0 in the psb_msvdx_uninit [ 1692.661250] DRM: fill_in_dev failed [ 1692.661387] psb 0000:00:02.0: PCI INT A disabled [ 1692.661412] DRM: drm_get_dev failed. [ 1692.661563] psb: probe of 0000:00:02.0 failed with error -22 This is my device: 00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07) > The ugliest part (apart from the binary blobbiness), as far as I > remember, is the libdrm2 vs. libdrm-poulsbo1 thing, where both packages > provide the same files - which I haven't figured out how to fix > correctly (I simply used force-overwrite and did some symlinks by hand.) Packagingtools-technically you could put a "Conflicts: libdrm2" into libdrm-poulsbo1's debian/control file, but I'm not sure this is the right solution here... psb-kernel-source-4.41.1 only builds a root, as it writes to /usr/src atm... that's also quite ugly :-) On Dienstag, 17. November 2009, Kushal Koolwal wrote: > As Adam asked, what problem are you facing? Are you able to build the psb > and drm component? > > Couple of weeks back I wrote a step-by-step guide [1] to get psb working on > Debian Squeeze. I followed your guide (thanks!), I think I've missed http://blogs.koolwal.net/wp-content/uploads/debian/psb-kernel-source-modified-files.tar though :) > Please give a shot to these pre-built squeeze packages [2] > and see if they work for you or not. Those packages also dont work for me on squeeze... they fail exactly the same. Xorg.0.log ends with: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching for BusID PCI:0:2:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card1 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card2 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card3 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card4 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card5 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card6 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card7 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card8 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card9 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card10 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card11 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card12 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card13 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card14 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card1 drmOpenDevice: node name is /dev/dri/card2 drmOpenDevice: node name is /dev/dri/card3 drmOpenDevice: node name is /dev/dri/card4 drmOpenDevice: node name is /dev/dri/card5 drmOpenDevice: node name is /dev/dri/card6 drmOpenDevice: node name is /dev/dri/card7 drmOpenDevice: node name is /dev/dri/card8 drmOpenDevice: node name is /dev/dri/card9 drmOpenDevice: node name is /dev/dri/card10 drmOpenDevice: node name is /dev/dri/card11 drmOpenDevice: node name is /dev/dri/card12 drmOpenDevice: node name is /dev/dri/card13 drmOpenDevice: node name is /dev/dri/card14 (EE) [drm] drmOpen failed. (EE) PSB(0): [dri] DRIScreenInit failed. Disabling DRI. (EE) [drm] Could not uninstall irq handler. (EE) PSB(0): This driver currently needs DRM to operate. Any ideas? regards, Holger
signature.asc
Description: This is a digitally signed message part.
