I have a motherboard which has an intel810 audio chipset on it AND an Soundblaster Live card. My loadspeakers are connected to the Soundblaster (emu10k1)
When I boot up, something is loading the sound modules for both chipsets, which seems to mean I get no sound. If I rmmod the i810_audio module and then /etc/init.d/alsa reload I then get working sound. How can I stop this module being loaded on boot? I have discover installed, but my discover.conf file shouldn't seach for sound see below # /etc/discover.conf: hardware detection settings # # $Id: discover.conf,v 1.1.1.1 2003/12/31 00:12:53 gaudenz-guest Exp $ # Default settings: # # Enable the PCI, USB, IDE, and SCSI bus scans: enable pci,usb,ide,scsi # Enable the PCMCIA scan too: #enable pcmcia # The ISA bus scan causes problems on some machines, and is slow, # so we might not want to scan these devices: #enable isa disable isa # The parallel and serial scans cause problems on some machines too: disable parallel,serial # Scan for the following types of hardware at boot time: boot bridge cdrom disk ethernet ide scsi #boot sound boot usb video #boot all # Don't ever load the foobar module: #skip foobar skip i180_audio -- Alan Chandler [EMAIL PROTECTED] First they ignore you, then they laugh at you, then they fight you, then you win. --Gandhi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
