I have a machine that currently has an IDE disk as the boot and / disk, and everything else is SCSI. I would like to convert this to an all-SCSI machine, for performance, cleanliness, and fun. I'm writing for advice on how to do this.
The kernel (2.4.24) is compiled with scsi and the necessary items so it should be able to boot from a SCSI disk. My thought is to do this: - Install the new SCSI drive - Mount partitions as necessary and move files to their new locations (probably using tar cf - . | (cd /newdrive ; tar xf - )) - Edit lilo.conf - lilo - power down - Remove IDE drive - Cross fingers - Reboot My concern is with lilo. How do I tell it to install in the SCSI disk's MBR, not the current boot disk? In the past, it seems like I've had trouble with that process. Any advice welcome - thanks. ---------------------------------------------------------------------- Andrew J Perrin - http://www.unc.edu/~aperrin Assistant Professor of Sociology, U of North Carolina, Chapel Hill [EMAIL PROTECTED] * andrew_perrin (at) unc.edu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
