i have two cards. one is an agp 9200, but i don't think it's supported.
right now, i have a pci 7500 installed. i changed some stuff in the config
and now it almost works. the only problem is, the kbd and mouse buttons
don't work! the mouse cursor moves just fine, though. weird.
here's my config:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
EndSection
Section "Module"
Load "GLcore"
Load "extmod"
Load "xie"
Load "pex5"
Load "dri"
Load "dbe"
Load "ddc"
Load "vbe"
Load "int10"
Load "record"
Load "xtrap"
Load "glx"
Load "speedo"
Load "type1"
Load "freetype"
EndSection
#Section "DRI"
# mode 0666
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
#Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
UseModes "Modes0"
HorizSync 30-100
VertRefresh 50-200
Gamma 0.95
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "CloneDisplay" # <i>
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
Identifier "Card0"
Option "UseFBDev"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon 7500"
#BusID "PCI:0:16:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
#Modes "1600x1200"
#Modes "1024x768"
#Modes "1152x864"
EndSubSection
EndSection
#Section "DRI"
# Mode 0666
#EndSection
Section "Modes"
Identifier "Modes0"
# mode generated by Xeasyconf
# Modeline "1024x768" 65.003 1024 1048 1184 1344 768 771 777 806 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
#Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
EndSection
--
Tom Vier <[EMAIL PROTECTED]>
DSA Key ID 0xE6CB97DA
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
