On Wed, Feb 11, 2004 at 09:30:00AM +0100, David Baron wrote: > <<<<<<< > Make sure you have the following line in the module section > Load "dri" > > Also add the following section if it doesn't exist > Section "DRI" > Mode 0666 > EndSection > <<<<<<<< > > These have been there. The rest of the files, XF86Config and -4 look to be in > order. Most GL apps still do not come up. The Quake window comes up but does > not paint its contents, hangs. > > Do I need the call any of the new modules in /etc/modules. Is there anything > else that needs to be touched to make this stuff work? >
Make sure the mach64 and the agpgart kernel module are loaded and check that the use count at least on the mach64 goes up to 1 when X is started. Try running glxinfo and see near the top if it reports that dri is enabled. Look in /var/log/XFree86.0.log to see if there are any error messages related to drm/dri. Also look to see that the mach64 is recognized properly (or mail the file if you don't understand the errors). > Thanks > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > +++++++++++++++++++++++++++++++++++++++++++ > This Mail Was Scanned By Mail-seCure System > at the Tel-Aviv University CC. > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
