Hello,
I just installed 'testing' on my new VIA based machine using 2.6 (uname
-a --> Linux server 2.6.0-1-386 #2 Sun Jan 11 16:54:21 EST 2004 i686
GNU/Linux). Since this is supposed to be the firewall for my home
network I'm trying to get dhcpd to run - which I have sucessfully done
in the past - but it's not working for me this time.
Originally I thought that the fact that I wanted the serve to listen on
an interface that is a USB/ethernet adapter was the problem, but I can't
make it work using the NIC on the motherboard either ...
Please let me know if you spot anything in the configs below.
Thanks, Joh
So here are my configurations:
ifconfig:
eth0 Link encap:Ethernet HWaddr 00:40:63:CA:C3:CA
inet addr:131.215.35.209 Bcast:131.215.35.255
Mask:255.255.255.0 inet6 addr: fe80::240:63ff:feca:c3ca/64
Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:103 errors:0 dropped:0 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14146 (13.8 KiB) TX bytes:1650 (1.6 KiB)
Interrupt:11 Base address:0xe800
eth1 Link encap:Ethernet HWaddr 00:0B:2B:13:33:55
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20b:2bff:fe13:3355/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1540 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:378 (378.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
/etc/dhcpd.conf:
option broadcast-address 192.168.1.255;
option subnet-mask 255.255.255.0;
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.2 192.168.1.5;
}
/etc/default/dhcp:
INTERFACES="eth1"
/etc/network/interfaces:
auto lo
iface lo inet loopback
# This entry was created during the Debian installation
auto eth0
iface eth0 inet dhcp
#iface eth0 inet static
# address 192.168.1.1
# netmask 255.255.255.0
# network 192.168.1.0
# broadcast 192.168.1.255
auto eth1
#iface eth1 inet dhcp
iface eth1 inet static
address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
and the output from lsmod:
Module Size Used by
md5 3968 1
ipv6 223936 8
rtl8150 11776 0
af_packet 19848 4
uhci_hcd 29456 0
ohci_hcd 16768 0
ehci_hcd 21380 0
usbcore 98652 6 rtl8150,uhci_hcd,ohci_hcd,ehci_hcd
evdev 8704 0
via82cxxx_audio 25864 0
uart401 11332 1 via82cxxx_audio
sound 75436 2 via82cxxx_audio,uart401
soundcore 8896 2 via82cxxx_audio,sound
ac97_codec 16908 1 via82cxxx_audio
ide_scsi 13700 0
via_rhine 19720 0
mii 4864 1 via_rhine
crc32 4608 1 via_rhine
parport_pc 32940 1
lp 10176 0
parport 39400 2 parport_pc,lp
aes 32704 3
cryptoloop 3584 3
ide_cd 36740 0
cdrom 31392 1 ide_cd
rtc 11960 0
loop 16008 7 cryptoloop
reiserfs 196464 2
isofs 32184 0
ext3 103208 0
jbd 53912 1 ext3
sd_mod 15520 0
ata_piix 7684 0
libata 35456 1 ata_piix,[permanent]
scsi_mod 108856 3 ide_scsi,sd_mod,libata
ide_disk 15872 4
ide_probe_mod 15872 0 [unsafe]
via82cxxx 13084 1 [unsafe]
ide_mod 133420 5
ide_scsi,ide_cd,ide_disk,ide_probe_mod,via82cxxx unix
25520 10 font 8576 0
cfbcopyarea 3968 0
cfbimgblt 3328 0
cfbfillrect 3712 0
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
