Thank you for your suggestion. Unfortunately, I get a message like this. "Your card is only supported by the 340 legacy drivers series, which is only available up to buster."
George at Clug <c...@goproject.info>, 31 Ara 2024 Sal, 20:27 tarihinde şunu yazdı: > > Serkan, > > I am assuming that this Nvidia video card is in a laptop? > > Is your GUI using Wayland? If it is, for testing purposes, I recommend > switching back to X11. > > You may have a hardware fault? > > Hoping that you do not have a hardware fault, I would recommend installing > Nvidia proprietary drivers. > > I would install and then run nvidia-detect and install the nvidia drivers it > recommends. > # apt install nvidia-detect > # nvidia-detect > # apt install [package recommended by nvidia-detect] > > If these drivers causes issues you should be able to remove the nvidia > drivers by > # apt purge nvidia* > > This Debian Wiki explains Nvidia proprietary driver installation better than > I can: > https://wiki.debian.org/NvidiaGraphicsDrivers > > For testing Nvidia drivers I like to use glmark2 > # apt install glmark2 > > If your GUI is using Wayland, then also install glmark2-wayland > # apt install glmark2 glmark2-wayland > > $ glmark2 > or > $ glmark2-wayland (for Wayland systems) > > Hope this helps. > > George. > > > On Tuesday, 31-12-2024 at 22:07 Serkan Kurt wrote: > > Hi! > > How can I test memory of the graphics card? > > How can I test other features of the graphics card? > > Is there free software for this purpose? > > > > The menu texts in the "Blender" software are not readable. Sometimes > > the system freezes while watching a video. > > > > nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 5 [systemd-logind[502]] > > subc 0 mthd 0060 data beef0201 > > > > nouveau 0000:01:00.0: firmware: failed to load nouveau/nv84_xuc00f (-2) > > nouveau 0000:01:00.0: firmware: failed to load nouveau/nv84_xuc00f (-2) > > nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc00f > > failed with error -2 > > nouveau 0000:01:00.0: vp: unable to load firmware nouveau/nv84_xuc00f > > nouveau 0000:01:00.0: vp: init failed, -2 > > nouveau 0000:01:00.0: firmware: failed to load nouveau/nv84_xuc103 (-2) > > nouveau 0000:01:00.0: firmware: failed to load nouveau/nv84_xuc103 (-2) > > nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc103 > > failed with error -2 > > nouveau 0000:01:00.0: bsp: unable to load firmware nouveau/nv84_xuc103 > > nouveau 0000:01:00.0: bsp: init failed, -2 > > > > My graphics card is NVIDIA Corporation G86M [GeForce 8600M GS] (rev a1). > > Debian 12 x86_64 GNU/Linux > > > > Best regards... > > > > >
