Here the "long" output of the 2 requested commands:
[ 0.306974] pci 0000:14:00.0: proprietary Ricoh MMC controller disabled (via
FireWire function)
[ 0.306975] pci 0000:14:00.0: MMC cards are now supported by standard SDHCI
controller
[ 0.306977] pci 0000:14:00.0: [1180:e822] type 00 class 0x080500
[ 0.307030] pci 0000:14:00.0: reg 0x10: [mem 0xfbc03000-0xfbc030ff]
[ 0.307351] pci 0000:14:00.0: supports D1 D2
[ 0.307353] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.307710] pci 0000:14:00.1: [1180:e230] type 00 class 0x088000
[ 0.307752] pci 0000:14:00.1: reg 0x10: [mem 0xfbc02000-0xfbc020ff]
[ 0.308059] pci 0000:14:00.1: supports D1 D2
[ 0.308061] pci 0000:14:00.1: PME# supported from D0 D1 D2 D3hot
[ 0.308288] pci 0000:14:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.308330] pci 0000:14:00.3: reg 0x10: [mem 0xfbc00000-0xfbc007ff]
[ 0.308520] pci 0000:14:00.3: Enabling fixed DMA alias to 00.0
[ 0.308626] pci 0000:14:00.3: supports D1 D2
[ 0.308627] pci 0000:14:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308936] pci 0000:00:1c.3: PCI bridge to [bus 14]
[ 0.308945] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.309128] pci 0000:00:1c.4: PCI bridge to [bus 15]
[ 0.309134] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.309139] pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfbbfffff]
[ 0.309146] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff
64bit pref]
[ 0.309197] pci_bus 0000:20: extended config space not accessible
[ 0.309300] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
[ 0.309325] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window]
(subtractive decode)
[ 0.309328] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window]
(subtractive decode)
[ 0.309330] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff
window] (subtractive decode)
[ 0.309332] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff
window] (subtractive decode)
[ 0.310457] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.310553] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
[ 0.310635] ACPI: PCI: Interrupt link LNKC configured for IRQ 3
[ 0.310728] ACPI: PCI: Interrupt link LNKD configured for IRQ 4
[ 0.310820] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.310913] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.311006] ACPI: PCI: Interrupt link LNKG configured for IRQ 10
[ 0.311087] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.311783] iommu: Default domain type: Translated
[ 0.311783] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.311783] pps_core: LinuxPPS API ver. 1 registered
[ 0.311783] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.311783] PTP clock support registered
[ 0.311783] EDAC MC: Ver: 3.0.0
[ 0.312445] NetLabel: Initializing
[ 0.312447] NetLabel: domain hash size = 128
[ 0.312448] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.312483] NetLabel: unlabeled traffic allowed by default
[ 0.312485] PCI: Using ACPI for IRQ routing
[ 0.328550] PCI: Discovered peer bus ff
[ 0.328552] PCI: root bus ff: using default resources
[ 0.328553] PCI: Probing PCI hardware (bus ff)
[ 0.328612] PCI host bridge to bus 0000:ff
[ 0.328614] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.328617] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.328619] pci_bus 0000:ff: No busn resource found for root bus, will use
[bus ff-ff]
[ 0.328621] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain
[bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.328643] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.328746] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.328839] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.328916] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.329004] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.329100] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.329201] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.329204] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain
[bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.329210] PCI: pci_cache_line_size set to 64 bytes
[ 0.329358] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.329361] e820: reserve RAM buffer [mem 0xbf594000-0xbfffffff]
[ 0.329363] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.329398] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.329398] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.329398] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.329398] vgaarb: loaded
[ 0.333298] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.333325] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.335472] clocksource: Switched to clocksource tsc-early
[ 0.335472] VFS: Disk quotas dquot_6.6.0
[ 0.335472] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.335472] AppArmor: AppArmor Filesystem Enabled
[ 0.335472] pnp: PnP ACPI init
[ 0.335472] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.335472] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.335472] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.335472] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.335472] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.335472] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.335472] system 00:02: [mem 0xfe800000-0xfe8001ff] has been reserved
[ 0.335472] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.335472] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.335472] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.335472] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.335472] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.335472] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.335472] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.335472] pnp: PnP ACPI: found 6 devices
[ 0.342701] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.342955] NET: Registered PF_INET protocol family
[ 0.343376] IP idents hash table entries: 131072 (order: 8, 1048576 bytes,
linear)
[ 0.347879] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4,
65536 bytes, linear)
[ 0.348007] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 0.348169] TCP established hash table entries: 65536 (order: 7, 524288
bytes, linear)
[ 0.349139] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes,
linear)
[ 0.350154] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.350540] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes,
linear)
[ 0.350670] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.350808] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes,
linear)
[ 0.351032] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.351058] NET: Registered PF_XDP protocol family
[ 0.351088] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 11]
add_size 1000
[ 0.351094] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 11] add_size 200000 add_align 100000
[ 0.351097] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to
[bus 11] add_size 200000 add_align 100000
[ 0.351114] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 12]
add_size 1000
[ 0.351116] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 12] add_size 200000 add_align 100000
[ 0.351121] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 14]
add_size 1000
[ 0.351124] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 14] add_size 200000 add_align 100000
[ 0.351157] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd2d00000-0xd2efffff]
[ 0.351179] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd2f00000-0xd30fffff
64bit pref]
[ 0.351186] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd3100000-0xd32fffff
64bit pref]
[ 0.351193] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd3300000-0xd34fffff
64bit pref]
[ 0.351209] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.351212] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.351215] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.351222] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.351226] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.351242] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.351245] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff
64bit pref]
[ 0.351249] pci 0000:00:1c.0: PCI bridge to [bus 11]
[ 0.351252] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.351257] pci 0000:00:1c.0: bridge window [mem 0xd2d00000-0xd2efffff]
[ 0.351274] pci 0000:00:1c.0: bridge window [mem 0xd2f00000-0xd30fffff
64bit pref]
[ 0.351283] pci 0000:00:1c.1: PCI bridge to [bus 12]
[ 0.351286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.351292] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.351309] pci 0000:00:1c.1: bridge window [mem 0xd3100000-0xd32fffff
64bit pref]
[ 0.351317] pci 0000:00:1c.2: PCI bridge to [bus 13]
[ 0.351321] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.351339] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.351344] pci 0000:00:1c.2: bridge window [mem 0xd2c00000-0xd2cfffff
64bit pref]
[ 0.351352] pci 0000:00:1c.3: PCI bridge to [bus 14]
[ 0.351355] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.351373] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.351378] pci 0000:00:1c.3: bridge window [mem 0xd3300000-0xd34fffff
64bit pref]
[ 0.351385] pci 0000:00:1c.4: PCI bridge to [bus 15]
[ 0.351389] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.351406] pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfbbfffff]
[ 0.351411] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff
64bit pref]
[ 0.351420] pci 0000:00:1e.0: PCI bridge to [bus 20]
[ 0.351447] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.351449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.351451] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.351454] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window]
[ 0.351468] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.351470] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
[ 0.351472] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit
pref]
[ 0.351475] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
[ 0.351477] pci_bus 0000:11: resource 1 [mem 0xd2d00000-0xd2efffff]
[ 0.351479] pci_bus 0000:11: resource 2 [mem 0xd2f00000-0xd30fffff 64bit
pref]
[ 0.351481] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
[ 0.351483] pci_bus 0000:12: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.351485] pci_bus 0000:12: resource 2 [mem 0xd3100000-0xd32fffff 64bit
pref]
[ 0.351487] pci_bus 0000:13: resource 0 [io 0xd000-0xdfff]
[ 0.351502] pci_bus 0000:13: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.351504] pci_bus 0000:13: resource 2 [mem 0xd2c00000-0xd2cfffff 64bit
pref]
[ 0.351506] pci_bus 0000:14: resource 0 [io 0x4000-0x4fff]
[ 0.351508] pci_bus 0000:14: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.351510] pci_bus 0000:14: resource 2 [mem 0xd3300000-0xd34fffff 64bit
pref]
[ 0.351512] pci_bus 0000:15: resource 0 [io 0xc000-0xcfff]
[ 0.351514] pci_bus 0000:15: resource 1 [mem 0xfb200000-0xfbbfffff]
[ 0.351516] pci_bus 0000:15: resource 2 [mem 0xd2100000-0xd2afffff 64bit
pref]
[ 0.351519] pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7 window]
[ 0.351533] pci_bus 0000:20: resource 5 [io 0x0d00-0xffff window]
[ 0.351535] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.351538] pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff window]
[ 0.351695] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.351698] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.472848] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 118291
usecs
[ 0.692751] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 214684
usecs
[ 0.692818] pci 0000:01:00.1: extending delay after power-on from D3hot to
20 msec
[ 0.692902] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.692930] pci 0000:12:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.693046] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.693061] software IO TLB: mapped [mem
0x00000000bb594000-0x00000000bf594000] (64MB)
[ 0.693185] Trying to unpack rootfs image as initramfs...
[ 0.694035] Initialise system trusted keyrings
[ 0.694072] Key type blacklist registered
[ 0.694252] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.699811] zbud: loaded
[ 0.700825] integrity: Platform Keyring initialized
[ 0.700856] integrity: Machine keyring initialized
[ 0.700860] Key type asymmetric registered
[ 0.700862] Asymmetric key parser 'x509' registered
[ 1.408076] tsc: Refined TSC clocksource calibration: 2260.949 MHz
[ 1.408104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x20971b1b9bb, max_idle_ns: 440795251433 ns
[ 1.409172] clocksource: Switched to clocksource tsc
[ 2.113771] Freeing initrd memory: 78028K
[ 2.126204] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 2.126290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
248)
[ 2.126367] io scheduler mq-deadline registered
[ 2.129009] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 2.129497] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 2.130009] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 2.130498] pcieport 0000:00:1c.3: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 2.130960] pcieport 0000:00:1c.4: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 2.131313] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.151431] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.151434] ACPI: thermal: Thermal Zone [THM] (38 C)
[ 2.151635] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.152331] Linux agpgart interface v0.103
[ 2.152486] AMD-Vi: AMD IOMMUv2 functionality not available on this system -
This is not a bug.
[ 2.152947] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at
0x60,0x64 irq 1,12
[ 2.177532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.177541] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.177722] mousedev: PS/2 mouse device common for all mice
[ 2.178542] rtc_cmos 00:01: RTC can wake from S4
[ 2.178841] rtc_cmos 00:01: registered as rtc0
[ 2.178880] rtc_cmos 00:01: setting system clock to 2024-03-13T09:27:17 UTC
(1710322037)
[ 2.178923] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram,
hpet irqs
[ 2.179055] intel_pstate: CPU model not supported
[ 2.179117] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.196739] NET: Registered PF_INET6 protocol family
[ 2.205336] Segment Routing with IPv6
[ 2.205377] In-situ OAM (IOAM) with IPv6
[ 2.205507] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 2.206308] mip6: Mobile IPv6
[ 2.206321] NET: Registered PF_PACKET protocol family
[ 2.206517] mpls_gso: MPLS GSO support
[ 2.207220] microcode: sig=0x20652, pf=0x10, revision=0x11
[ 2.207297] microcode: Microcode Update Driver: v2.2.
[ 2.207305] IPI shorthand broadcast: enabled
[ 2.207344] sched_clock: Marking stable (2239042928,
-31970750)->(2208657927, -1585749)
[ 2.207717] registered taskstats version 1
[ 2.207739] Loading compiled-in X.509 certificates
[ 2.240978] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.241009] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux:
14011249c2675ea8e5148542202005810584b25f'
[ 2.241872] zswap: loaded using pool lzo/zbud
[ 2.242433] Key type .fscrypt registered
[ 2.242439] Key type fscrypt-provisioning registered
[ 2.250199] Key type encrypted registered
[ 2.250213] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.250235] ima: No TPM chip found, activating TPM-bypass!
[ 2.250240] ima: Allocated hash algorithm: sha256
[ 2.250265] ima: No architecture policies found
[ 2.250291] evm: Initialising EVM extended attributes:
[ 2.250293] evm: security.selinux
[ 2.250296] evm: security.SMACK64 (disabled)
[ 2.250298] evm: security.SMACK64EXEC (disabled)
[ 2.250300] evm: security.SMACK64TRANSMUTE (disabled)
[ 2.250302] evm: security.SMACK64MMAP (disabled)
[ 2.250304] evm: security.apparmor
[ 2.250306] evm: security.ima
[ 2.250307] evm: security.capability
[ 2.250309] evm: HMAC attrs: 0x1
[ 2.430934] Freeing unused decrypted memory: 2036K
[ 2.431656] Freeing unused kernel image (initmem) memory: 2792K
[ 2.444189] Write protecting the kernel read-only data: 26624k
[ 2.445165] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 2.445563] Freeing unused kernel image (rodata/data gap) memory: 1184K
[ 2.512896] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.512956] x86/mm: Checking user space page tables
[ 2.573983] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.573993] Run /init as init process
[ 2.573995] with arguments:
[ 2.573996] /init
[ 2.573998] splash
[ 2.573999] with environment:
[ 2.574000] HOME=/
[ 2.574001] TERM=linux
[ 2.574002] BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64
[ 2.714803] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.714856] ACPI: button: Power Button [PWRB]
[ 2.714950] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 2.718461] ACPI: battery: Slot [BAT0] (battery absent)
[ 2.719757] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method
not found
[ 2.725046] ACPI: video: Video Device [PEGP] (multi-head: yes rom: no
post: no)
[ 2.725378] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4
[ 2.728153] ACPI: button: Lid Switch [LID0]
[ 2.728282] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input5
[ 2.728335] ACPI: button: Sleep Button [SBTN]
[ 2.728406] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.728464] ACPI: button: Power Button [PWRF]
[ 2.771434] r8168: loading out-of-tree module taints kernel.
[ 2.771916] r8168: module verification failed: signature and/or required key
missing - tainting kernel
[ 2.775797] r8168 Gigabit Ethernet driver 8.051.02-NAPI loaded
[ 2.777161] r8168: This product is covered by one or more of the following
patents: US6,570,884, US6,115,776, and US6,327,625.
[ 2.777219] r8168 Copyright (C) 2022 Realtek NIC software team
<nic...@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details,
please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it
under certain conditions; see <http://www.gnu.org/licenses/>.
[ 2.810897] ACPI: bus type drm_connector registered
[ 2.817661] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F conflicts with OpRegion
0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1)
(20220331/utaddress-204)
[ 2.817674] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 2.817676] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1)
(20220331/utaddress-204)
[ 2.817684] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 2.817686] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1)
(20220331/utaddress-204)
[ 2.817693] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 2.817695] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.821646] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.823442] i801_smbus 0000:00:1f.3: Accelerometer lis3lv02d is present on
SMBus but its address is unknown, skipping registration
[ 2.823447] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 2.823871] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 2.824418] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 2.826002] sdhci: Secure Digital Host Controller Interface driver
[ 2.826006] sdhci: Copyright(c) Pierre Ossman
[ 2.851199] sdhci-pci 0000:14:00.0: SDHCI controller found [1180:e822] (rev
1)
[ 2.851426] sdhci-pci 0000:14:00.0: Will use DMA mode even though HW doesn't
fully claim to support it.
[ 2.851488] mmc0 bounce up to 128 segments into one, max segment size 65536
bytes
[ 2.858368] ACPI: bus type USB registered
[ 2.858414] usbcore: registered new interface driver usbfs
[ 2.858440] usbcore: registered new interface driver hub
[ 2.858458] usbcore: registered new device driver usb
[ 2.876591] mmc0: SDHCI controller on PCI [0000:14:00.0] using DMA
[ 2.877547] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.877561] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 2.877579] ehci-pci 0000:00:1a.0: debug port 2
[ 2.882873] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf08000
[ 2.883038] SCSI subsystem initialized
[ 2.896352] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.896447] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.01
[ 2.896453] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.896456] usb usb1: Product: EHCI Host Controller
[ 2.896459] usb usb1: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd
[ 2.896461] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.896732] hub 1-0:1.0: USB hub found
[ 2.896747] hub 1-0:1.0: 2 ports detected
[ 2.897368] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.897378] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 2.897396] ehci-pci 0000:00:1d.0: debug port 2
[ 2.902630] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf07000
[ 2.916334] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.916444] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.01
[ 2.916450] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.916454] usb usb2: Product: EHCI Host Controller
[ 2.916457] usb usb2: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd
[ 2.916459] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.926072] hub 2-0:1.0: USB hub found
[ 2.926092] hub 2-0:1.0: 2 ports detected
[ 2.940345] libata version 3.00 loaded.
[ 2.944138] firewire_ohci 0000:14:00.3: added OHCI v1.10 device as card 0, 4
IR + 4 IT contexts, quirks 0x11
[ 2.944338] r8168 0000:13:00.0 enp19s0: renamed from eth0
[ 2.951159] ahci 0000:00:1f.2: version 3.0
[ 2.962243] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 2.962254] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio
slum part ems sxs apst
[ 3.028884] scsi host0: ahci
[ 3.029139] scsi host1: ahci
[ 3.029417] scsi host2: ahci
[ 3.029655] scsi host3: ahci
[ 3.029890] scsi host4: ahci
[ 3.030117] scsi host5: ahci
[ 3.030198] ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100
irq 31
[ 3.030204] ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180
irq 31
[ 3.030208] ata3: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06200
irq 31
[ 3.030212] ata4: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06280
irq 31
[ 3.030216] ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300
irq 31
[ 3.030220] ata6: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06380
irq 31
[ 3.156049] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.305950] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 3.307452] Console: switching to colour dummy device 80x25
[ 3.307644] nouveau 0000:01:00.0: NVIDIA GT216 (0a5480a2)
[ 3.312472] usb 1-1: New USB device found, idVendor=8087, idProduct=0020,
bcdDevice= 0.00
[ 3.312477] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.312767] hub 1-1:1.0: USB hub found
[ 3.312874] hub 1-1:1.0: 6 ports detected
[ 3.340307] nouveau 0000:01:00.0: bios: version 70.16.5a.01.02
[ 3.341061] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 3.342539] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.342578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.342617] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.342642] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.342819] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.342871] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.343383] ata1.00: supports DRM functions and may not be fully accessible
[ 3.343386] ata1.00: ATA-10: CT500MX500SSD1, M3CR023, max UDMA/133
[ 3.343459] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.344425] ata1.00: Features: Trust Dev-Sleep
[ 3.344534] ata1.00: supports DRM functions and may not be fully accessible
[ 3.345251] ata1.00: configured for UDMA/133
[ 3.345440] scsi 0:0:0:0: Direct-Access ATA CT500MX500SSD1 023
PQ: 0 ANSI: 5
[ 3.360098] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.364414] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW40, max UDMA/100
[ 3.364421] ata2.00: applying bridge limits
[ 3.383286] ata2.00: configured for UDMA/100
[ 3.385968] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW40
PQ: 0 ANSI: 5
[ 3.433864] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 3.433868] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 3.433872] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 3.433874] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 3.433877] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[ 3.433880] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000000
[ 3.433882] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022362 00020010
[ 3.433885] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[ 3.433886] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[ 3.433888] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001261
[ 3.436981] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 3.452177] firewire_core 0000:14:00.3: created device fw0: GUID
47203fc0344fc000, S400
[ 3.488408] nouveau 0000:01:00.0: DRM: allocated 1600x900 fb: 0x70000, bo
(____ptrval____)
[ 3.491971] fbcon: nouveaudrmfb (fb0) is primary device
[ 3.516466] usb 2-1: New USB device found, idVendor=8087, idProduct=0020,
bcdDevice= 0.00
[ 3.516471] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.516901] hub 2-1:1.0: USB hub found
[ 3.517718] hub 2-1:1.0: 8 ports detected
[ 3.540617] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466
GiB)
[ 3.540623] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.540648] sd 0:0:0:0: [sda] Write Protect is off
[ 3.540652] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.540725] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.540837] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 3.542086] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 3.542090] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.542812] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.543373] sd 0:0:0:0: [sda] supports TCG Opal
[ 3.543377] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.589930] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.604082] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 3.713985] usb 1-1.3: New USB device found, idVendor=138a, idProduct=0008,
bcdDevice= c.90
[ 3.713991] usb 1-1.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=1
[ 3.713994] usb 1-1.3: SerialNumber: 2111d21c4300
[ 3.808095] usb 2-1.7: new high-speed USB device number 3 using ehci-pci
[ 3.908523] psmouse serio1: synaptics: queried max coordinates: x [..5650],
y [..4710]
[ 3.993628] usb 2-1.7: New USB device found, idVendor=0c45, idProduct=6481,
bcdDevice= 2.01
[ 3.993634] usb 2-1.7: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 3.993636] usb 2-1.7: Product: Laptop_Integrated_Webcam_2M
[ 3.993638] usb 2-1.7: Manufacturer: CKF9237G1150200009X0
[ 4.023550] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 581785
[ 4.100729] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 4.857289] Console: switching to colour frame buffer device 200x56
[ 4.907400] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 4.924680] nouveau 0000:01:00.0: DRM: Skipping nv_backlight registration
[ 4.927216] acpi device:02: registered as cooling_device4
[ 4.927317] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on
minor 0
[ 6.240036] random: crng init done
[ 6.308844] PM: Image not found (code -22)
[ 6.462950] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota
mode: none.
[ 6.560258] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 6.686066] systemd[1]: RTC configured in localtime, applying delta of 60
minutes to system time.
[ 6.707149] systemd[1]: Inserted module 'autofs4'
[ 6.733900] systemd[1]: systemd 252.22-1~deb12u1 running in system mode
(+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL
+ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP
+LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD
-BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 6.733913] systemd[1]: Detected architecture x86-64.
[ 6.735453] systemd[1]: Hostname set to <debian>.
[ 6.925026] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile=
references a path below legacy directory /var/run/, updating
/var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file
accordingly.
[ 7.025921] systemd[1]: Queued start job for default target graphical.target.
[ 7.053346] systemd[1]: Created slice machine.slice - Virtual Machine and
Container Slice.
[ 7.054364] systemd[1]: Created slice system-getty.slice - Slice
/system/getty.
[ 7.054937] systemd[1]: Created slice system-modprobe.slice - Slice
/system/modprobe.
[ 7.055471] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice
/system/systemd-fsck.
[ 7.055879] systemd[1]: Created slice user.slice - User and Session Slice.
[ 7.056020] systemd[1]: Started systemd-ask-password-wall.path - Forward
Password Requests to Wall Directory Watch.
[ 7.056358] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount -
Arbitrary Executable File Formats File System Automount Point.
[ 7.056405] systemd[1]: Expecting device
dev-disk-by\x2duuid-1fb6ebee\x2da2ab\x2d4ca8\x2d89d0\x2dc0b9bf47ff21.device -
/dev/disk/by-uuid/1fb6ebee-a2ab-4ca8-89d0-c0b9bf47ff21...
[ 7.056422] systemd[1]: Expecting device
dev-disk-by\x2duuid-7c70d558\x2db185\x2d4816\x2db77e\x2dc66b29b34360.device -
/dev/disk/by-uuid/7c70d558-b185-4816-b77e-c66b29b34360...
[ 7.056469] systemd[1]: Reached target integritysetup.target - Local
Integrity Protected Volumes.
[ 7.056533] systemd[1]: Reached target remote-fs.target - Remote File
Systems.
[ 7.056559] systemd[1]: Reached target slices.target - Slice Units.
[ 7.056620] systemd[1]: Reached target veritysetup.target - Local Verity
Protected Volumes.
[ 7.056653] systemd[1]: Reached target virt-guest-shutdown.target - Libvirt
guests shutdown.
[ 7.056799] systemd[1]: Listening on dm-event.socket - Device-mapper event
daemon FIFOs.
[ 7.057070] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon
socket.
[ 7.057251] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 7.057423] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd
communication Socket.
[ 7.057540] systemd[1]: Listening on systemd-initctl.socket - initctl
Compatibility Named Pipe.
[ 7.058098] systemd[1]: Listening on systemd-journald-audit.socket - Journal
Audit Socket.
[ 7.058333] systemd[1]: Listening on systemd-journald-dev-log.socket -
Journal Socket (/dev/log).
[ 7.058618] systemd[1]: Listening on systemd-journald.socket - Journal
Socket.
[ 7.059190] systemd[1]: Listening on systemd-udevd-control.socket - udev
Control Socket.
[ 7.059433] systemd[1]: Listening on systemd-udevd-kernel.socket - udev
Kernel Socket.
[ 7.061405] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File
System...
[ 7.063357] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File
System...
[ 7.065310] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File
System...
[ 7.067388] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace
File System...
[ 7.067790] systemd[1]: Finished blk-availability.service - Availability of
block devices.
[ 7.070685] systemd[1]: Starting keyboard-setup.service - Set the console
keyboard layout...
[ 7.073039] systemd[1]: Starting kmod-static-nodes.service - Create List of
Static Device Nodes...
[ 7.075298] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2
mirrors, snapshots etc. using dmeventd or progress polling...
[ 7.078003] systemd[1]: Starting modprobe@configfs.service - Load Kernel
Module configfs...
[ 7.080534] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel
Module dm_mod...
[ 7.083041] systemd[1]: Starting modprobe@drm.service - Load Kernel Module
drm...
[ 7.085139] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel
Module efi_pstore...
[ 7.087650] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module
fuse...
[ 7.090282] systemd[1]: Starting modprobe@loop.service - Load Kernel Module
loop...
[ 7.090580] systemd[1]: systemd-fsck-root.service - File System Check on
Root Device was skipped because of an unmet condition check
(ConditionPathExists=!/run/initramfs/fsck-root).
[ 7.094301] systemd[1]: Starting systemd-journald.service - Journal
Service...
[ 7.102599] systemd[1]: Starting systemd-modules-load.service - Load Kernel
Modules...
[ 7.104983] systemd[1]: Starting systemd-remount-fs.service - Remount Root
and Kernel File Systems...
[ 7.107844] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All
udev Devices...
[ 7.111413] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 7.112011] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File
System.
[ 7.115702] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled.
Duplicate IMA measurements will not be recorded in the IMA log.
[ 7.115758] device-mapper: uevent: version 1.0.3
[ 7.116568] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised:
dm-de...@redhat.com
[ 7.126087] loop: module loaded
[ 7.131386] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File
System.
[ 7.132006] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File
System.
[ 7.132789] systemd[1]: Finished kmod-static-nodes.service - Create List of
Static Device Nodes.
[ 7.133750] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 7.134063] systemd[1]: Finished modprobe@configfs.service - Load Kernel
Module configfs.
[ 7.134701] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 7.135097] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel
Module dm_mod.
[ 7.135279] fuse: init (API version 7.37)
[ 7.135863] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 7.137123] systemd[1]: Finished modprobe@drm.service - Load Kernel Module
drm.
[ 7.138134] systemd[1]: modprobe@efi_pstore.service: Deactivated
successfully.
[ 7.138427] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel
Module efi_pstore.
[ 7.139384] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 7.139821] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module
fuse.
[ 7.140582] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 7.140883] systemd[1]: Finished modprobe@loop.service - Load Kernel Module
loop.
[ 7.143733] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE
Control File System...
[ 7.145819] systemd[1]: Mounting sys-kernel-config.mount - Kernel
Configuration File System...
[ 7.146037] systemd[1]: systemd-repart.service - Repartition Root Disk was
skipped because no trigger condition checks were met.
[ 7.146291] EXT4-fs (sda5): re-mounted. Quota mode: none.
[ 7.149330] systemd[1]: Finished systemd-remount-fs.service - Remount Root
and Kernel File Systems.
[ 7.149936] systemd[1]: systemd-firstboot.service - First Boot Wizard was
skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 7.150034] systemd[1]: systemd-pstore.service - Platform Persistent Storage
Archival was skipped because of an unmet condition check
(ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 7.152231] systemd[1]: Starting systemd-random-seed.service - Load/Save
Random Seed...
[ 7.154932] systemd[1]: Starting systemd-sysusers.service - Create System
Users...
[ 7.160902] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control
File System.
[ 7.174559] systemd[1]: Mounted sys-kernel-config.mount - Kernel
Configuration File System.
[ 7.182171] lp: driver loaded but no devices found
[ 7.189579] systemd[1]: Finished systemd-random-seed.service - Load/Save
Random Seed.
[ 7.190158] systemd[1]: first-boot-complete.target - First Boot Complete was
skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 7.207914] systemd[1]: Finished systemd-sysusers.service - Create System
Users.
[ 7.211188] ppdev: user-space parallel port driver
[ 7.220672] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create
Static Device Nodes in /dev...
[ 7.221421] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2
mirrors, snapshots etc. using dmeventd or progress polling.
[ 7.255516] tun: Universal TUN/TAP device driver, 1.6
[ 7.264675] systemd[1]: Finished systemd-modules-load.service - Load Kernel
Modules.
[ 7.267330] systemd[1]: Starting systemd-sysctl.service - Apply Kernel
Variables...
[ 7.271403] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create
Static Device Nodes in /dev.
[ 7.280693] systemd[1]: Starting systemd-udevd.service - Rule-based Manager
for Device Events and Files...
[ 7.300972] systemd[1]: Finished systemd-sysctl.service - Apply Kernel
Variables.
[ 7.329368] systemd[1]: Started systemd-journald.service - Journal Service.
[ 7.368313] systemd-journald[285]: Received client request to flush runtime
journal.
[ 7.603611] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.623969] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.705359] ACPI: AC: AC Adapter [AC] (on-line)
[ 7.864619] bcma-pci-bridge 0000:12:00.0: bus0: Found chip with id 43224,
rev 0x01 and package 0x0A
[ 7.864662] bcma-pci-bridge 0000:12:00.0: bus0: Core 0 found: ChipCommon
(manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 7.864690] bcma-pci-bridge 0000:12:00.0: bus0: Core 1 found: IEEE 802.11
(manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 7.864753] bcma-pci-bridge 0000:12:00.0: bus0: Core 2 found: PCIe (manuf
0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 7.867889] iTCO_vendor_support: vendor-support=0
[ 7.868615] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 7.868863] at24 0-0050: supply vcc not found, using dummy regulator
[ 7.869546] at24 0-0050: 256 byte spd EEPROM, read-only
[ 7.869588] at24 0-0052: supply vcc not found, using dummy regulator
[ 7.870213] at24 0-0052: 256 byte spd EEPROM, read-only
[ 7.873858] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value
(found 25, expected 29)
[ 7.874134] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics
turbo disabled until i915 loads
[ 7.879920] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 7.883008] bcma-pci-bridge 0000:12:00.0: bus0: Bus registered
[ 7.883119] iTCO_wdt iTCO_wdt.1.auto: Found a HM57 TCO device (Version=2,
TCOBASE=0x0460)
[ 7.890833] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec
(nowayout=0)
[ 7.934912] mc: Linux media interface: v0.10
[ 7.968120] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.4)
[ 8.008409] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS
userspace interface not supported(0), try upgrading to a newer BIOS
[ 8.022659] videodev: Linux video capture interface: v2.00
[ 8.036345] input: Dell WMI hotkeys as
/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 8.174271] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 8.174285] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 8.317890] usb 2-1.7: Found UVC 1.00 device Laptop_Integrated_Webcam_2M
(0c45:6481)
[ 8.342361] input: Laptop_Integrated_Webcam_2M: In as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input10
[ 8.347217] usbcore: registered new interface driver uvcvideo
[ 8.356689] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5:
line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 8.356701] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 8.356705] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 8.356709] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 8.356711] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 8.356714] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 8.356717] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 8.392844] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly.
Using workaround
[ 8.445042] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.445603] input: HDA Intel MID Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.445921] input: HDA Intel MID Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.455694] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 8.456101] cfg80211: Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 8.456500] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 8.456851] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.457147] cfg80211: Loaded X.509 cert 'wens:
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 8.459611] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 8.464110] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 8.472223] Adding 999420k swap on /dev/sda6. Priority:-2 extents:1
across:999420k SSFS
[ 8.508642] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 8.510005] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 8.510256] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 8.512394] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 8.597690] EXT4-fs (sda7): mounted filesystem with ordered data mode. Quota
mode: none.
[ 8.633605] Support for cores revisions 0x17 and 0x18 disabled by module
param allhwsupport=0. Try b43.allhwsupport=1
[ 8.633616] b43: probe of bcma0:1 failed with error -524
[ 8.633648] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 8.678074] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 17
[ 8.680351] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.706400] audit: type=1400 audit(1710318444.023:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=504
comm="apparmor_parser"
[ 8.706409] audit: type=1400 audit(1710318444.023:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=504 comm="apparmor_parser"
[ 8.706674] audit: type=1400 audit(1710318444.023:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=503
comm="apparmor_parser"
[ 8.708316] brcmsmac bcma0:1 wlp18s0b1: renamed from wlan0
[ 8.711819] audit: type=1400 audit(1710318444.027:5): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=502
comm="apparmor_parser"
[ 8.711832] audit: type=1400 audit(1710318444.027:6): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium"
pid=502 comm="apparmor_parser"
[ 8.716493] audit: type=1400 audit(1710318444.035:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=507
comm="apparmor_parser"
[ 8.716503] audit: type=1400 audit(1710318444.035:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=507
comm="apparmor_parser"
[ 8.716508] audit: type=1400 audit(1710318444.035:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=507
comm="apparmor_parser"
[ 8.719219] audit: type=1400 audit(1710318444.035:10): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505
comm="apparmor_parser"
[ 8.719230] audit: type=1400 audit(1710318444.035:11): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=505 comm="apparmor_parser"
[ 9.263238] NET: Registered PF_QIPCRTR protocol family
[ 9.515314] enp19s0: 0xffff9751c0039000, a4:ba:db:b5:ed:62, IRQ 30
[ 9.599926] brcmsmac bcma0:1: firmware: direct-loading firmware
brcm/bcm43xx-0.fw
[ 9.600464] brcmsmac bcma0:1: firmware: direct-loading firmware
brcm/bcm43xx_hdr-0.fw
[ 9.600599] brcmsmac bcma0:1: brcms_ops_start: brcms_up() returned -132
[ 9.803281] L1TF CPU bug present and SMT on, data leak possible. See
CVE-2018-3646 and
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for
details.
[ 9.891627] r8168 0000:13:00.0: invalid VPD tag 0x00 (size 0) at offset 0;
assume missing optional EEPROM
[ 12.723303] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 12.723314] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[ 12.723325] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 12.723329] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084 failed with error -2
[ 12.723342] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 12.723351] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 12.723353] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084d failed with error -2
[ 12.723356] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 12.723359] nouveau 0000:01:00.0: msvld: init failed, -19
[ 14.425623] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 14.425660] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 14.425666] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084 failed with error -2
[ 14.425697] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 14.425725] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 14.425729] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084d failed with error -2
[ 14.425733] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 14.425749] nouveau 0000:01:00.0: msvld: init failed, -19
[ 62.812947] r8168: enp19s0: link up
[ 62.812992] IPv6: ADDRCONF(NETDEV_CHANGE): enp19s0: link becomes ready
[ 63.836067] r8168: enp19s0: link down
[ 84.316893] r8168: enp19s0: link up
[ 85.340056] r8168: enp19s0: link down
[ 132.444969] r8168: enp19s0: link up
[ 291.981189] perf: interrupt took too long (2501 > 2500), lowering
kernel.perf_event_max_sample_rate to 79750
[ 406.069798] perf: interrupt took too long (3137 > 3126), lowering
kernel.perf_event_max_sample_rate to 63750
[ 565.363994] perf: interrupt took too long (3958 > 3921), lowering
kernel.perf_event_max_sample_rate to 50500
[ 1607.007175] r8168: enp19s0: link down
[ 1639.776150] r8168: enp19s0: link up
[ 1816.605693] perf: interrupt took too long (4961 > 4947), lowering
kernel.perf_event_max_sample_rate to 40250
[ 2267.682175] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 2267.682207] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 2267.682211] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084 failed with error -2
[ 2267.682237] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 2267.682259] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 2267.682261] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084d failed with error -2
[ 2267.682264] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 2267.682266] nouveau 0000:01:00.0: msvld: init failed, -19
[ 2743.273897] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[ 2743.383621] usb 2-1.3: New USB device found, idVendor=0781, idProduct=5151,
bcdDevice= 2.00
[ 2743.383631] usb 2-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2743.383648] usb 2-1.3: Product: Cruzer Micro
[ 2743.383652] usb 2-1.3: Manufacturer: SanDisk
[ 2743.383655] usb 2-1.3: SerialNumber: 0876831B2682EF47
[ 2743.440953] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 2743.444657] scsi host6: usb-storage 2-1.3:1.0
[ 2743.446597] usbcore: registered new interface driver usb-storage
[ 2743.456456] usbcore: registered new interface driver uas
[ 2744.451225] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Micro 8.02
PQ: 0 ANSI: 0 CCS
[ 2744.451820] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2744.452601] sd 6:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.75
GiB)
[ 2744.453293] sd 6:0:0:0: [sdb] Write Protect is off
[ 2744.453298] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 2744.453943] sd 6:0:0:0: [sdb] No Caching mode page found
[ 2744.453961] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2744.460703] sdb: sdb1
[ 2744.461413] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2750.485338] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 2750.485375] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 2750.485380] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084 failed with error -2
[ 2750.485417] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 2750.485443] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 2750.485447] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084d failed with error -2
[ 2750.485451] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 2750.485467] nouveau 0000:01:00.0: msvld: init failed, -19
[ 2813.022057] sdb: detected capacity change from 7856127 to 0
[ 2816.637456] usb 2-1.3: USB disconnect, device number 4
[ 3421.681027] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 3421.681065] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084 (-2)
[ 3421.681082] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084 failed with error -2
[ 3421.681112] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 3421.681125] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nva5_fuc084d (-2)
[ 3421.681130] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nva5_fuc084d failed with error -2
[ 3421.681146] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 3421.681150] nouveau 0000:01:00.0: msvld: init failed, -19
root@debian:/home/frantal# journalctl
mag 07 09:21:16 debian systemd-timesyncd[489]: Initial synchronization to time >
mag 07 09:21:16 debian systemd[1]: systemd-hostnamed.service: Succeeded.
mag 07 09:21:21 debian tracker-store[903]: OK
mag 07 09:21:21 debian systemd[702]: tracker-store.service: Succeeded.
mag 07 09:21:31 debian dbus-daemon[539]: [system] Activating via systemd: servi>
mag 07 09:21:31 debian systemd[1]: Starting PackageKit Daemon...
mag 07 09:21:31 debian PackageKit[1865]: daemon start
mag 07 09:21:31 debian dbus-daemon[539]: [system] Successfully activated servic>
mag 07 09:21:31 debian systemd[1]: Started PackageKit Daemon.
mag 07 09:22:07 debian kernel: brcmsmac bcma0:1: brcms_ops_bss_info_changed: qo>
mag 07 09:22:37 debian systemd[1]: Starting Daily apt upgrade and clean activit>
mag 07 09:22:37 debian systemd[1]: apt-daily-upgrade.service: Succeeded.
mag 07 09:22:37 debian systemd[1]: Finished Daily apt upgrade and clean activit>
mag 07 09:22:45 debian kernel: brcmsmac bcma0:1: brcms_ops_bss_info_changed: qo>
mag 07 09:22:55 debian dbus-daemon[735]: [session uid=1000 pid=735] Activating >
mag 07 09:22:55 debian systemd[702]: Starting Tracker metadata database store a>
mag 07 09:22:55 debian dbus-daemon[735]: [session uid=1000 pid=735] Successfull>
mag 07 09:22:55 debian systemd[702]: Started Tracker metadata database store an>
mag 07 09:22:56 debian dbus-daemon[735]: [session uid=1000 pid=735] Activating >
mag 07 09:22:56 debian systemd[702]: Starting Tracker metadata extractor...
mag 07 09:22:56 debian tracker-extract[2111]: Set scheduler policy to SCHED_IDLE
mag 07 09:22:56 debian tracker-extract[2111]: Setting priority nice level to 19
mag 07 09:22:56 debian dbus-daemon[735]: [session uid=1000 pid=735] Successfull>
lines 1-23
I think not all was copied, hoping here there will be what is important to
solve...
Thanks again
Francesco
> Il 13/03/2024 10:39 CET Marco Moock <m...@dorfdsl.de> ha scritto:
>
>
> Am 13.03.2024 um 10:19:04 Uhr schrieb fran...@libero.it:
>
> > So I give a try to ask to ChatGPT what does it mean that command and
> > this was the answer:
>
> This was already clear.
> The question is now: Why does autoneg fail?
>
> Please check dmesg and journalctl for any messages from Networkmanager.
>
> --
> Gruß
> Marco
>
> Send spam to 1710321544mu...@cartoonies.org
