>> My current favourites are RK3588 based CPU SBC devices which have an
>> exceptionally fast set of CPUs, high speed networking, and options for
>> Debian or Ubuntu or OpenWRT or Armbian.
>
> Are these the usual SBC setup where you have to run the vendor kernel,
> plus possibly other custom bits, or would pure Debian including kernel
> run on them?
A good source of info to find out is to check the device tree files in
the official kernel source code:
https://github.com/torvalds/linux/tree/master/arch/arm64/boot/dts/rockchip
you'll see lots of rk3588 boards are supported and if you look inside
that board's `.dts` file you can see which parts of its hardware are
actually supported by the vanilla kernel (tho this is not written in
natural language, so if you're not familiar with the technical details
of devicetree files it can be somewhat challenging to interpret, YMMV).
> I'm currently running a Globalscale SheevaPlug and a DreamPlugs but
> Debian support for the old ARM architecture is likely to end soon.
> (Dropping it seems to come up each release, but so far they're still
> releasing for it.)
If these can run the `armhf` port you should be fine for a few
more years. For `armel` the writing is on the wall, tho.
Stefan
