On 3/26/21 4:50 PM, R. Ramesh wrote:
Hi,
I installed debian buster on minisforum X35G with Core i3-1005G1.
Install went through fine, but lightdm does not start up. Upon
inspecting logs, I found out that X server does not startup for
lightdm to use. Looking /var/log/Xorg.0.log, I see these error messages
yoda-mini [rramesh] 43 > fgrep EE /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3134.273] (EE) open /dev/dri/card0: No such file or directory
[ 3134.273] (EE) open /dev/dri/card0: No such file or directory
[ 3134.274] (EE) Unable to find a valid framebuffer device
[ 3134.274] (EE) Screen 0 deleted because of no matching config
section.
[ 3134.274] (EE) Screen 0 deleted because of no matching config
section.
[ 3134.274] (EE)
[ 3134.274] (EE) Cannot run in framebuffer mode. Please specify
busIDs for all framebuffer devices
[ 3134.274] (EE)
[ 3134.274] (EE)
[ 3134.274] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information.
[ 3134.274] (EE)
[ 3134.278] (EE) Server terminated with error (1). Closing log file.
Sure enough I cannot find /dev/dri. I double checked and udev is
mounted on /dev
yoda-mini [rramesh] 44 > df -h
Filesystem Size Used Avail Use% Mounted on
udev 7.7G 0 7.7G 0% /dev
tmpfs 1.6G 18M 1.6G 2% /run
/dev/nvme0n1p5 341G 3.6G 320G 2% /
tmpfs 7.8G 0 7.8G 0% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
/dev/nvme0n1p1 96M 51M 46M 53% /boot/efi
tmpfs 1.6G 0 1.6G 0% /run/user/1000
My lspci shows this
00:00.0 Host bridge: Intel Corporation Device 8a02 (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Device 8a56
(rev 07)
00:07.0 PCI bridge: Intel Corporation Device 8a1d (rev 03)
00:0d.0 USB controller: Intel Corporation Device 8a13 (rev 03)
00:0d.2 System peripheral: Intel Corporation Device 8a17 (rev 03)
00:14.0 USB controller: Intel Corporation Ice Lake-LP USB 3.1 xHCI
Host Controller (rev 30)
00:14.2 RAM memory: Intel Corporation Device 34ef (rev 30)
00:15.0 Serial bus controller [0c80]: Intel Corporation Ice Lake-LP
Serial IO I2C Controller (rev 30)
00:16.0 Communication controller: Intel Corporation Device 34e0
(rev 30)
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA
Controller [RAID mode] (rev 30)
00:1c.0 PCI bridge: Intel Corporation Device 34ba (rev 30)
00:1c.4 PCI bridge: Intel Corporation Ice Lake-LP PCI Express Root
Port (rev 30)
00:1d.0 PCI bridge: Intel Corporation Ice Lake-LP PCI Express Root
Port (rev 30)
00:1d.4 PCI bridge: Intel Corporation Device 34b4 (rev 30)
00:1e.0 Communication controller: Intel Corporation Ice Lake-LP
Serial IO UART Controller (rev 30)
00:1e.3 Serial bus controller [0c80]: Intel Corporation Ice Lake-LP
Serial IO SPI Controller (rev 30)
00:1f.0 ISA bridge: Intel Corporation Ice Lake-LP LPC Controller
(rev 30)
00:1f.3 Audio device: Intel Corporation Device 34c8 (rev 30)
00:1f.4 SMBus: Intel Corporation Ice Lake-LP SMBus Controller (rev 30)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Ice Lake-LP
SPI Controller (rev 30)
2c:00.0 Network controller: Intel Corporation Device 2723 (rev 1a)
2d:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
2e:00.0 Non-Volatile memory controller: Phison Electronics
Corporation Device 5013 (rev 01)
2f:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
I thought 00:02.0 is the device X is looking for, but for some reason
its equivalent /dev/dri items are missing. Not sure how to help my X.
Please advise.
Regards
Ramesh
I added "deb http://deb.debian.org/debian buster-backports main contrib
non-free" to my sources.list and updated/installed 5.10 kernel and
everything is fine per my quick check.
I think 10 generation intel cpu's graphics is not supported in 4.19
kernel that is installed with stable per an article I read while googling.
Ramesh
